GEDA

From CBLFS
Revision as of 11:20, 18 August 2008 by Weibullguy (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Download Source:
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/Makefile
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/libgeda-1.4.0.tar.gz
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/geda-symbols-1.4.0.tar.gz
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/geda-gschem-1.4.0.tar.gz
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/geda-gnetlist-1.4.0.tar.gz
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/geda-gsymcheck-1.4.0.tar.gz
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/geda-gattrib-1.4.0.tar.gz
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/geda-utils-1.4.0.tar.gz
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/geda-docs-1.4.0.tar.gz
ftp://ftp.geda.seul.org/pub/geda/release/v1.4/1.4.0/geda-examples-1.4.0.tar.gz

Introduction to GEDA

gEDA is the GNU Electronic Design Automation suite. It is a schematic capture, netlister, symbols, symbol checker, and utility program. This is the base EDA suite. Other modules that are installed separately include PCB, gerbv, gnucap, Icarus Verilog, GSpiceUI, GTKWave, gwave, ngspice, and gnetman.

Project Homepage: http://www.geda.seul.org/

Dependencies

Required

Non-Multilib

Create a working directory:

mkdir geda &&
cd geda

Download all of the tarballs and the 'master' Makefile. Unpack all of the tarballs.

Install the gEDA suite:

make prefix=/usr install

Multilib

32Bit

To do...

N32

To do...

64Bit

To do...

Contents

Installed Directories: /usr/share/gEDA/{pixmaps,scheme,sym}
Installed Programs: gschem
Installed Libraries: libgeda.{a,la,so}

Short Description

gschem: The main gEDA program.