Difference between revisions of "Apcupsd"

From CBLFS
Jump to navigationJump to search
(Added homepage)
 
(10 intermediate revisions by 2 users not shown)
Line 2: Line 2:
 
|-
 
|-
 
!Download Source:
 
!Download Source:
−
| http://superb-west.dl.sourceforge.net/sourceforge/apcupsd/apcupsd-3.14.0.tar.gz
+
| http://downloads.sourceforge.net/apcupsd/apcupsd-{{Apcupsd-Version}}.tar.gz
 
|}
 
|}
  
 
----
 
----
  
−
== Introduction to Apcupsd ==
+
{{Package-Introduction|Apcupsd is a deamon that talks with APC ups and monitors it's status. There are alot of devices that it will work with one should read up on it.|http://www.apcupsd.org/}}
  
−
Apcupsd is a deamon that talks with APC ups and monitors it's status. There are alot of devices that it will work with one should read up on it.
+
== Dependencies ==
 +
 
 +
=== Optional ===
 +
* [[TCP Wrappers]]
 +
* [[GD]]
 +
* [[libusb]]
 +
* [[Gtk2]] and [[GConf]] (Required to build gapcmon)
 +
 
 +
== Configuration Information ==
 +
 
 +
MANUAL: http://www.apcupsd.org/manual/index.html
  
−
== Dependencies ==
+
--enable-usb: Turns on generation of the USB driver code.
 +
 
 +
--with-upstype=<YOUR_UPS>: This option allows you to specify the type of UPS that will be connected to your computer
 +
 
 +
--with-upscable=<YOUR_CABLE>: This option allows you to specify what cable you are using to connect to the UPS
 +
 
 +
--enable-cgi: Enables the building of the CGI programs that permit Web browser access to apcupsd data
 +
 
 +
--with-cgi-bin=<CGI_DIR>: Points to your CGI dir
 +
 
 +
--enable-gapcmon: A Gtk2/GLib2 GUI application used to monitor UPS devices controlled by the APCUPSD package.
  
−
=== Required ===
+
--enable-powerflute: Is a ncurses based program to monitor the UPS.
  
 
== Non-Multilib ==
 
== Non-Multilib ==
Line 19: Line 39:
 
Compile the package:
 
Compile the package:
 
   
 
   
−
You will need to check and set USB to the correct device. Most new UPS use a USB, but it might not...
+
  ./configure --prefix=/usr --with-log-dir=/var/log \
−
 
+
    --enable-usb --with-upstype=usb --with-upscable=usb \
−
  ./configure --prefix=/opt/apc --with-log-dir=/var/log \
+
    --enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
−
--enable-usb --with-upstype=usb --with-upscable=usb &&
+
    --enable-gapcmon --enable-powerflute &&
 
  make
 
  make
  
−
Install the package
+
Install the package:
  
−
  make install  
+
  make install
  
 
== Multilib ==
 
== Multilib ==
Line 35: Line 55:
  
 
Compile the package:
 
Compile the package:
−
  CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" USE_ARCH=32 \
+
 
 +
  CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
 +
PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" USE_ARCH=32 \
 
  ./configure --prefix=/usr --with-log-dir=/var/log \
 
  ./configure --prefix=/usr --with-log-dir=/var/log \
−
--enable-usb --with-upstype=usb --with-upscable=usb &&
+
    --enable-usb --with-upstype=usb --with-upscable=usb \
 +
    --enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
 +
    --enable-gapcmon --enable-powerflute &&
 
  make
 
  make
  
−
Install the package
+
Install the package:
  
 
  make install
 
  make install
Line 46: Line 70:
 
=== N32 ===
 
=== N32 ===
  
−
TO DO!
+
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
 +
PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" USE_ARCH=n32 \
 +
./configure --prefix=/usr --with-log-dir=/var/log \
 +
    --enable-usb --with-upstype=usb --with-upscable=usb \
 +
    --enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
 +
    --enable-gapcmon --enable-powerflute &&
 +
make
 +
 
 +
Install the package:
 +
 
 +
make install
  
 
=== 64Bit ===
 
=== 64Bit ===
  
−
Compile the package
+
Compile the package:
  
−
  CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" USE_ARCH=64 \
+
  CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
 +
PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" USE_ARCH=64 \
 
  ./configure --prefix=/usr --with-log-dir=/var/log \
 
  ./configure --prefix=/usr --with-log-dir=/var/log \
−
--enable-usb --with-upstype=usb --with-upscable=usb &&
+
    --enable-usb --with-upstype=usb --with-upscable=usb \
 +
    --enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
 +
    --enable-gapcmon --enable-powerflute &&
 
  make
 
  make
  
−
Install the package
+
Install the package:
  
 
  make install
 
  make install
Line 65: Line 102:
 
=== BootScript ===
 
=== BootScript ===
  
−
Init script IS NOT yet included in the [[blfs-bootscripts]] package.
+
Create the bootscript:
  
 +
cat > /etc/rc.d/init.d/apcupsd << "EOF"
 
  #!/bin/sh
 
  #!/bin/sh
 
  # Begin $rc_base/init.d/apcupsd
 
  # Begin $rc_base/init.d/apcupsd
−
 
+
 
  # Based on sysklogd script from LFS-3.1 and earlier.
 
  # Based on sysklogd script from LFS-3.1 and earlier.
 
  # Rewritten by zippo zippo@oppiz.net
 
  # Rewritten by zippo zippo@oppiz.net
−
 
+
 
  #$LastChangedBy: oppiz  
 
  #$LastChangedBy: oppiz  
 
  #$Date: 2007-02-15 00:13:00Hrs
 
  #$Date: 2007-02-15 00:13:00Hrs
−
 
+
 
  . /etc/sysconfig/rc
 
  . /etc/sysconfig/rc
 
  . $rc_functions
 
  . $rc_functions
−
 
+
 
  case "$1" in
 
  case "$1" in
 
     start)
 
     start)
Line 85: Line 123:
 
         sleep 1
 
         sleep 1
 
         ;;
 
         ;;
−
 
+
 
     stop)
 
     stop)
 
         boot_mesg "Stopping Apcupsd Server..."
 
         boot_mesg "Stopping Apcupsd Server..."
 
         killproc /sbin/apcupsd
 
         killproc /sbin/apcupsd
 
         ;;
 
         ;;
−
 
+
 
     reload)
 
     reload)
 
         boot_mesg "Reloading Apcupsd Server..."
 
         boot_mesg "Reloading Apcupsd Server..."
 
         reloadproc /sbin/apcupsd
 
         reloadproc /sbin/apcupsd
 
         ;;
 
         ;;
−
 
+
 
     restart)
 
     restart)
 
         $0 stop
 
         $0 stop
Line 101: Line 139:
 
         $0 start
 
         $0 start
 
         ;;
 
         ;;
−
 
+
 
     status)
 
     status)
 
         statusproc /sbin/apcupsd
 
         statusproc /sbin/apcupsd
 
         ;;
 
         ;;
−
 
+
 
     *)
 
     *)
 
         echo "Usage: $0 {start|stop|reload|restart|status}"
 
         echo "Usage: $0 {start|stop|reload|restart|status}"
Line 111: Line 149:
 
         ;;
 
         ;;
 
  esac
 
  esac
 +
 +
# End $rc_base/init.d/apcupsd
 +
EOF
 +
chmod -v 754 /etc/rc.d/init.d/apcupsd
  
−
  # End $rc_base/init.d/apcupsd
+
Link it into the runlevels:
 +
 
 +
  for link in /etc/rc.d/rc{{0,1,6}.d/K50,{2,3,4,5}.d/S15}apcupsd; do
 +
  ln -sfv ../init.d/apcupsd $link;
 +
done
 +
 
 +
[[Category:Power Management]]

Latest revision as of 11:00, 25 March 2009

Download Source: http://downloads.sourceforge.net/apcupsd/apcupsd-3.14.5.tar.gz

Introduction to Apcupsd

Apcupsd is a deamon that talks with APC ups and monitors it's status. There are alot of devices that it will work with one should read up on it.

Project Homepage: http://www.apcupsd.org/

Dependencies

Optional

Configuration Information

MANUAL: http://www.apcupsd.org/manual/index.html

--enable-usb: Turns on generation of the USB driver code.

--with-upstype=<YOUR_UPS>: This option allows you to specify the type of UPS that will be connected to your computer

--with-upscable=<YOUR_CABLE>: This option allows you to specify what cable you are using to connect to the UPS

--enable-cgi: Enables the building of the CGI programs that permit Web browser access to apcupsd data

--with-cgi-bin=<CGI_DIR>: Points to your CGI dir

--enable-gapcmon: A Gtk2/GLib2 GUI application used to monitor UPS devices controlled by the APCUPSD package.

--enable-powerflute: Is a ncurses based program to monitor the UPS.

Non-Multilib

Compile the package: 

./configure --prefix=/usr --with-log-dir=/var/log \
    --enable-usb --with-upstype=usb --with-upscable=usb \
    --enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
    --enable-gapcmon --enable-powerflute &&
make

Install the package: 

make install

Multilib

This package does not provide any libraries so only one installation is needed.

32Bit

Compile the package: 

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" USE_ARCH=32 \
./configure --prefix=/usr --with-log-dir=/var/log \
    --enable-usb --with-upstype=usb --with-upscable=usb \
    --enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
    --enable-gapcmon --enable-powerflute &&
make

Install the package: 

make install

N32

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" USE_ARCH=n32 \
./configure --prefix=/usr --with-log-dir=/var/log \
    --enable-usb --with-upstype=usb --with-upscable=usb \
    --enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
    --enable-gapcmon --enable-powerflute &&
make

Install the package: 

make install

64Bit

Compile the package: 

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" USE_ARCH=64 \
./configure --prefix=/usr --with-log-dir=/var/log \
    --enable-usb --with-upstype=usb --with-upscable=usb \
    --enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
    --enable-gapcmon --enable-powerflute &&
make

Install the package: 

make install

Configuring

BootScript

Create the bootscript: 

cat > /etc/rc.d/init.d/apcupsd << "EOF"
#!/bin/sh
# Begin $rc_base/init.d/apcupsd

# Based on sysklogd script from LFS-3.1 and earlier.
# Rewritten by zippo zippo@oppiz.net

#$LastChangedBy: oppiz 
#$Date: 2007-02-15 00:13:00Hrs

. /etc/sysconfig/rc
. $rc_functions

case "$1" in
    start)
       boot_mesg "Starting Apcupsd Server..."
       loadproc /sbin/apcupsd
       sleep 1
       ;;

   stop)
       boot_mesg "Stopping Apcupsd Server..."
       killproc /sbin/apcupsd
       ;;

   reload)
       boot_mesg "Reloading Apcupsd Server..."
       reloadproc /sbin/apcupsd
       ;;

   restart)
       $0 stop
       sleep 1
       $0 start
       ;;

   status)
       statusproc /sbin/apcupsd
       ;;

   *)
       echo "Usage: $0 {start|stop|reload|restart|status}"
       exit 1
       ;;
esac

# End $rc_base/init.d/apcupsd
EOF
chmod -v 754 /etc/rc.d/init.d/apcupsd

Link it into the runlevels: 

for link in /etc/rc.d/rc{{0,1,6}.d/K50,{2,3,4,5}.d/S15}apcupsd; do
  ln -sfv ../init.d/apcupsd $link;
done
Retrieved from "?title=Apcupsd&oldid=17839"