Difference between revisions of "FreeType"
(I added the "Contents" section from BLFS.) |
m |
||
| Line 2: | Line 2: | ||
|-valign="top" | |-valign="top" | ||
!Download Source: | !Download Source: | ||
| − | | http://prdownloads.sourceforge.net/freetype/freetype- | + | | http://prdownloads.sourceforge.net/freetype/freetype-{{FreeType-Version}}.tar.bz2 |
|-valign="top" | |-valign="top" | ||
!Optional Documentation: | !Optional Documentation: | ||
| − | | http://prdownloads.sourceforge.net/freetype/freetype-doc- | + | | http://prdownloads.sourceforge.net/freetype/freetype-doc-{{FreeType-Version}}.tar.bz2 |
|} | |} | ||
| Line 22: | Line 22: | ||
If you downloaded the additional documentation, unpack it into the source tree using the following command: | If you downloaded the additional documentation, unpack it into the source tree using the following command: | ||
| − | tar xf ../freetype-doc- | + | tar xf ../freetype-doc-{{FreeType-Version}}.tar.bz2 --strip-components=2 -C docs |
This command enables the built-in TrueType bytecode interpreter which in turn enables hinting of TrueType glyphs. Enabling the interpreter results in much better rendering of TrueType fonts. | This command enables the built-in TrueType bytecode interpreter which in turn enables hinting of TrueType glyphs. Enabling the interpreter results in much better rendering of TrueType fonts. | ||
| Line 36: | Line 36: | ||
make install && | make install && | ||
| − | install -v -m755 -d /usr/share/doc/freetype- | + | install -v -m755 -d /usr/share/doc/freetype-{{FreeType-Version}} && |
| − | cp -v -R docs/* /usr/share/doc/freetype- | + | cp -v -R docs/* /usr/share/doc/freetype-{{FreeType-Version}} |
== Multilib == | == Multilib == | ||
| Line 77: | Line 77: | ||
If you downloaded the additional documentation, unpack it into the source tree using the following command: | If you downloaded the additional documentation, unpack it into the source tree using the following command: | ||
| − | tar xf ../freetype-doc- | + | tar xf ../freetype-doc-{{FreeType-Version}}.tar.bz2 --strip-components=2 -C docs |
This command enables the built-in TrueType bytecode interpreter which in turn enables hinting of TrueType glyphs. Enabling the interpreter results in much better rendering of TrueType fonts. | This command enables the built-in TrueType bytecode interpreter which in turn enables hinting of TrueType glyphs. Enabling the interpreter results in much better rendering of TrueType fonts. | ||
| Line 93: | Line 93: | ||
mv -v /usr/bin/freetype-config{,-64} && | mv -v /usr/bin/freetype-config{,-64} && | ||
ln -sf multiarch_wrapper /usr/bin/freetype-config && | ln -sf multiarch_wrapper /usr/bin/freetype-config && | ||
| − | install -v -m755 -d /usr/share/doc/freetype- | + | install -v -m755 -d /usr/share/doc/freetype-{{FreeType-Version}} && |
| − | cp -v -R docs/* /usr/share/doc/freetype- | + | cp -v -R docs/* /usr/share/doc/freetype-{{FreeType-Version}} |
= Contents = | = Contents = | ||
Revision as of 11:47, 17 December 2006
| Download Source: | http://prdownloads.sourceforge.net/freetype/freetype-2.4.12.tar.bz2 |
|---|---|
| Optional Documentation: | http://prdownloads.sourceforge.net/freetype/freetype-doc-2.4.12.tar.bz2 |
Newer versions of FreeType are incompatible with other packages. Please leave FreeType at 2.1.10 unless you've built a fairly complete system against a newer version. For the non-belivers of this warning here is an example. http://pastebin.cross-lfs.org/300
Contents
Introduction to FreeType
The FreeType package contains a library to allow applications to properly render TrueType fonts.
Dependencies
Non-Multilib
If you downloaded the additional documentation, unpack it into the source tree using the following command:
tar xf ../freetype-doc-2.4.12.tar.bz2 --strip-components=2 -C docs
This command enables the built-in TrueType bytecode interpreter which in turn enables hinting of TrueType glyphs. Enabling the interpreter results in much better rendering of TrueType fonts.
sed -i -r 's:.*(#.*BYTE.*) .*:\1:' include/freetype/config/ftoption.h
Configure and compile the package:
./configure --prefix=/usr && make
Install the package:
make install && install -v -m755 -d /usr/share/doc/freetype-2.4.12 && cp -v -R docs/* /usr/share/doc/freetype-2.4.12
Multilib
32Bit
This command enables the built-in TrueType bytecode interpreter which in turn enables hinting of TrueType glyphs. Enabling the interpreter results in much better rendering of TrueType fonts.
sed -i -r 's:.*(#.*BYTE.*) .*:\1:' include/freetype/config/ftoption.h
Configure and compile the package:
CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make
Install the package:
make install &&
mv -v /usr/bin/freetype-config{,-32}
N32
This command enables the built-in TrueType bytecode interpreter which in turn enables hinting of TrueType glyphs. Enabling the interpreter results in much better rendering of TrueType fonts.
sed -i -r 's:.*(#.*BYTE.*) .*:\1:' include/freetype/config/ftoption.h
Configure and compile the package:
CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make
Install the package:
make install &&
mv -v /usr/bin/freetype-config{,-n32}
64Bit
If you downloaded the additional documentation, unpack it into the source tree using the following command:
tar xf ../freetype-doc-2.4.12.tar.bz2 --strip-components=2 -C docs
This command enables the built-in TrueType bytecode interpreter which in turn enables hinting of TrueType glyphs. Enabling the interpreter results in much better rendering of TrueType fonts.
sed -i -r 's:.*(#.*BYTE.*) .*:\1:' include/freetype/config/ftoption.h
Configure and compile the package:
CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make
Install the package:
make install &&
mv -v /usr/bin/freetype-config{,-64} &&
ln -sf multiarch_wrapper /usr/bin/freetype-config &&
install -v -m755 -d /usr/share/doc/freetype-2.4.12 &&
cp -v -R docs/* /usr/share/doc/freetype-2.4.12
Contents
| Installed Programs: | freetype-config |
|---|---|
| Installed Libraries: | libfreetype.{so,a} |
| Installed Directories: | /usr/include/freetype2 |
Short Descriptions
| freetype-config | is used to get FreeType compilation and linking information. |
|---|---|
| libfreetype.{so,a} | contains functions to add TrueType font capabilities to the X Window system. |
