Libgphoto2
From CBLFS
Jump to navigationJump to searchDownload Source: | http://prdownloads.sourceforge.net/gphoto/libgphoto2-2.4.9.1.tar.bz2 |
---|
Contents
Dependencies
Optional
Non-Multilib
Compile the package:
sed -i "/dbus_connection/s/disconnect/close/" libgphoto2_port/disk/disk.c && ./configure --prefix=/usr && make all-local && make
Install the package
make install
Multilib
32Bit
Compile the package:
sed -i "/dbus_connection/s/disconnect/close/" libgphoto2_port/disk/disk.c && CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \ USE_ARCH=32 ./configure --prefix=/usr && make all-local && make
Install the package
make install && mv -v /usr/bin/gphoto2-config{,-32} && mv -v /usr/bin/gphoto2-port-config{,-32}
N32
Compile the package:
sed -i "/dbus_connection/s/disconnect/close/" libgphoto2_port/disk/disk.c && CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \ USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 && make all-local && make
Install the package
make install && mv -v /usr/bin/gphoto2-config{,-n32} && mv -v /usr/bin/gphoto2-port-config{,-n32}
64Bit
Compile the package:
sed -i "/dbus_connection/s/disconnect/close/" libgphoto2_port/disk/disk.c && CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \ USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 && make all-local && make
Install the package
make install && mv -v /usr/bin/gphoto2-config{,-64} && mv -v /usr/bin/gphoto2-port-config{,-64} && ln -sfv multiarch_wrapper /usr/bin/gphoto2-config && ln -sfv multiarch_wrapper /usr/bin/gphoto2-port-config
Configuring libgphoto2 with libptp
The following instructions explain how to change permissions to used libgphoto2 with libptp with no-root user.
In root :
ptpcam --list-devices
You get something like this:
Listing devices...
bus/dev vendorID/prodID device model
2/4 0x040A/0x05BA C633 Zoom Digital Camera
After, create a udev rule file, with datas give by the ptpcam:
cat > /etc/udev/rules.d/92-libgphoto2.rules << "EOF" # udev rules file for libgphoto2 devices BUS=="usb", SYSFS{idVendor}=="040a", SYSFS{idProduct}=="05ba", MODE="0660", GROUP="camera" EOF
Next, create a group named "camera" and add your user.