MIT krb5

Download Source:	http://web.mit.edu/kerberos/www/dist/krb5/1.7/krb5-1.7-signed.tar

---

Introduction to MIT krb5

Project Homepage: Unknown

Dependencies

Optional

• xinetd (services servers only)
• Linux-PAM (for xdm based logins)
• OpenLDAP (alternative for krb5kdc password database)

Note

A time synchronization facility of some sort (like NTP) is needed on your system if you're going to be using Kerberos. Kerberos won't authenticate if the time differential between a kerberized client and the KDC server is more than 5 minutes. And since you'll probably want Kerberos to be able to authenticate, you'll want to synchronize the time between teh client and the server.

Non-Multilib

Build the packge:

cd src &&  CPPFLAGS="-DEAI_NODATA=EAI_NONAME" \
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var/lib \
   --enable-dns --mandir=/usr/share/man &&
make

Install the package:

make install &&
chmod -v 755 /usr/lib/lib{com_err,des425,gssapi_krb5,gssrpc,k5crypto}.so* &&
chmod -v 755 /usr/lib/lib{kadm5clnt,kadm5srv,kdb5,krb4,krb5,krb5support}.so* &&
chmod -v 755 /usr/lib/krb5/plugins/kdb/db2.so &&
mv -v /usr/lib/libdes425.so.3* /lib &&
mv -v /usr/lib/libk5crypto.so.3* /lib &&
mv -v /usr/lib/libkrb5.so.3* /lib &&
mv -v /usr/lib/libkrb4.so.2* /lib &&
mv -v /usr/lib/libcom_err.so.3* /lib &&
mv -v /usr/lib/libgssapi_krb5.so.2* /lib &&
mv -v /usr/lib/libkrb5support.so.0* /lib &&
ln -v -sf ../../lib/libkrb4.so.2 /usr/lib/libkrb4.so &&
ln -v -sf ../../lib/libkrb5.so.3 /usr/lib/libkrb5.so &&
ln -v -sf ../../lib/libk5crypto.so.3 /usr/lib/libk5crypto.so &&
ln -v -sf ../../lib/libcom_err.so.3 /usr/lib/libcom_err.so &&
ln -v -sf ../../lib/libdes425.so.3 /usr/lib/libdes425.so &&
ln -v -sf ../../lib/libgssapi_krb5.so.2 /usr/lib/libgssapi_krb5.so &&
ln -v -sf ../../lib/libkrb5support.so.0 /usr/lib/libkrb5support.so &&
mv -v /usr/bin/ksu /bin &&
ldconfig

Multilib

32Bit

Build the packge:

cd src &&
CPPFLAGS="-DEAI_NODATA=EAI_NONAME" CC="gcc ${BUILD32}" USE_ARCH=32 \
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var/lib \
   --enable-dns --mandir=/usr/share/man &&
make

Install the package:

make install &&
chmod -v 755 /usr/lib/lib{com_err,des425,gssapi_krb5,gssrpc,k5crypto}.so* &&
chmod -v 755 /usr/lib/lib{kadm5clnt,kadm5srv,kdb5,krb4,krb5,krb5support}.so* &&
chmod -v 755 /usr/lib/krb5/plugins/kdb/db2.so &&
mv -v /usr/lib/libdes425.so.3* /lib &&
mv -v /usr/lib/libk5crypto.so.3* /lib &&
mv -v /usr/lib/libkrb5.so.3* /lib &&
mv -v /usr/lib/libkrb4.so.2* /lib &&
mv -v /usr/lib/libcom_err.so.3* /lib &&
mv -v /usr/lib/libgssapi_krb5.so.2* /lib &&
mv -v /usr/lib/libkrb5support.so.0* /lib &&
ln -v -sf ../../lib/libkrb4.so.2 /usr/lib/libkrb4.so &&
ln -v -sf ../../lib/libkrb5.so.3 /usr/lib/libkrb5.so &&
ln -v -sf ../../lib/libk5crypto.so.3 /usr/lib/libk5crypto.so &&
ln -v -sf ../../lib/libcom_err.so.3 /usr/lib/libcom_err.so &&
ln -v -sf ../../lib/libdes425.so.3 /usr/lib/libdes425.so &&
ln -v -sf ../../lib/libgssapi_krb5.so.2 /usr/lib/libgssapi_krb5.so &&
ln -v -sf ../../lib/libkrb5support.so.0 /usr/lib/libkrb5support.so &&
mv -v /usr/bin/ksu /bin &&
mv -v /usr/bin/krb5-config{,-32} &&
ldconfig

N32

Build the packge:

cd src &&
CPPFLAGS="-DEAI_NODATA=EAI_NONAME" CC="gcc ${BUILDN32}" USE_ARCH=n32 \
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var/lib \
   --enable-dns --mandir=/usr/share/man --libdir=/usr/lib32 &&
make

Install the package:

make install &&
chmod -v 755 /usr/lib32/lib{com_err,des425,gssapi_krb5,gssrpc,k5crypto}.so* &&
chmod -v 755 /usr/lib32/lib{kadm5clnt,kadm5srv,kdb5,krb4,krb5,krb5support}.so* &&
chmod -v 755 /usr/lib32/krb5/plugins/kdb/db2.so &&
mv -v /usr/lib32/libdes425.so.3* /lib32 &&
mv -v /usr/lib32/libk5crypto.so.3* /lib32 &&
mv -v /usr/lib32/libkrb5.so.3* /lib32 &&
mv -v /usr/lib32/libkrb4.so.2* /lib32 &&
mv -v /usr/lib32/libcom_err.so.3* /lib32 &&
mv -v /usr/lib32/libgssapi_krb5.so.2* /lib32 &&
mv -v /usr/lib32/libkrb5support.so.0* /lib32 &&
ln -v -sf ../../lib32/libkrb4.so.2 /usr/lib32/libkrb4.so &&
ln -v -sf ../../lib32/libkrb5.so.3 /usr/lib32/libkrb5.so &&
ln -v -sf ../../lib32/libk5crypto.so.3 /usr/lib32/libk5crypto.so &&
ln -v -sf ../../lib32/libcom_err.so.3 /usr/lib32/libcom_err.so &&
ln -v -sf ../../lib32/libdes425.so.3 /usr/lib32/libdes425.so &&
ln -v -sf ../../lib32/libgssapi_krb5.so.2 /usr/lib32/libgssapi_krb5.so &&
ln -v -sf ../../lib32/libkrb5support.so.0 /usr/lib32/libkrb5support.so &&
mv -v /usr/bin/ksu /bin &&
mv -v /usr/bin/krb5-config{,-n32} &&
ldconfig

64Bit

Build the packge:

cd src &&
CPPFLAGS="-DEAI_NODATA=EAI_NONAME" CC="gcc ${BUILD64}" USE_ARCH=64 \
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var/lib \
   --enable-dns --mandir=/usr/share/man --libdir=/usr/lib64 &&
make

Install the package:

make install &&
chmod -v 755 /usr/lib64/lib{com_err,des425,gssapi_krb5,gssrpc,k5crypto}.so* &&
chmod -v 755 /usr/lib64/lib{kadm5clnt,kadm5srv,kdb5,krb4,krb5,krb5support}.so* &&
chmod -v 755 /usr/lib64/krb5/plugins/kdb/db2.so &&
mv -v /usr/lib64/libdes425.so.3* /lib64 &&
mv -v /usr/lib64/libk5crypto.so.3* /lib64 &&
mv -v /usr/lib64/libkrb5.so.3* /lib64 &&
mv -v /usr/lib64/libkrb4.so.2* /lib64 &&
mv -v /usr/lib64/libcom_err.so.3* /lib64 &&
mv -v /usr/lib64/libgssapi_krb5.so.2* /lib64 &&
mv -v /usr/lib64/libkrb5support.so.0* /lib64 &&
ln -v -sf ../../lib64/libkrb4.so.2 /usr/lib64/libkrb4.so &&
ln -v -sf ../../lib64/libkrb5.so.3 /usr/lib64/libkrb5.so &&
ln -v -sf ../../lib64/libk5crypto.so.3 /usr/lib64/libk5crypto.so &&
ln -v -sf ../../lib64/libcom_err.so.3 /usr/lib64/libcom_err.so &&
ln -v -sf ../../lib64/libdes425.so.3 /usr/lib64/libdes425.so &&
ln -v -sf ../../lib64/libgssapi_krb5.so.2 /usr/lib64/libgssapi_krb5.so &&
ln -v -sf ../../lib64/libkrb5support.so.0 /usr/lib64/libkrb5support.so &&
mv -v /usr/bin/ksu /bin &&
mv -v /usr/bin/krb5-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/krb5-config &&
ldconfig

Configuring

Warning:
login.krb5 does not support shadow passwords. So, when the Kerberos
server is unavailable, the default use of /etc/password will not work
because the passwords are now in /etc/shadow (where they were put while
building CLFS). Entering the following commands without moving the passwords back
to /etc/password could prevent any logins.

If you understand the above warning and Linux-PAM is not installed, the following commands can be used:

mv -v /bin/login /bin/login.shadow &&
cp -v /usr/sbin/login.krb5 /bin/login

If CrackLib is installed, or if any word list has been put in /usr/share/dict, the following commands should be used:

ln -s /usr/share/dict/words /var/lib/krb5kdc/kadmin.dict

See BLFS' MIT krb5 page for how to configure Kerberos.

For additional information, take a look at Documentation for krb-1.4.1.

Contents

Installed Programs:	compile-et, ftp, ftpd, gss-client, gss-server, k5srvutil, kadmin, kadmin.local, kadmind, kadmind4, kdb5_util, kdestroy, kinit, klist, klogind, kpasswd, kprop, kpropd, krb5-send-pr, krb5-config, krb524d, krb524init, krb5kdc, kshd, ksu, ktutil, kvno, login.krb5, rcp, rlogin, rsh, sclient, sim_client, sim_server, sserver, telnet, telnetd, uuclient, uuserver, v5passwd, and v5passwdd
Installed Libraries:	libcom_err.{so,a}, libdes425.{so,a}, libgssapi.{so,a}, libgssrpc.{so,a}, libkadm5clnt.{so,a}, libkadm5srv.{so,a}, libkdb5.{so,a}, libkrb5.{so,a}, and libkrb4.{so,a}
Installed Directory:	/usr/include/kerberosIV and /var/lib/krb5kdc

Short Descriptions

compile_et	converts the table listing error-code names into a C source file.
ftp	is a kerberized FTP client.
ftpd	is a kerberized FTP daemon.
k5srvutil	is a host keytable manipulation utility.
kadmin	is an utility used to make modifications to the Kerberos database.
kadmind	is a server for administrative access to a Kerberos database.
kdb5_util	is the KDC database utility.
kdestroy	removes the current set of tickets.
kinit	is used to authenticate to the Kerberos server as a principal and acquire a ticket granting ticket that can later be used to obtain tickets for other services.
klist	reads and displays the current tickets in the credential cache.
klogind	is the server that responds to rlogin requests.
kpasswd	is a program for changing Kerberos 5 passwords.
kprop	takes a principal database in a specified format and converts it into a stream of database records.
kpropd	receives a database sent by kprop and writes it as a local database.
krb5-config	gives information on how to link programs against libraries.
krb5kdc	is a Kerberos 5 server.
kshd	is the server that responds to rsh requests.
ksu	is the super user program using Kerberos protocol. Requires a properly configured /etc/shells and ~/.k5login containing principals authorized to become super users.
ktutil	is a program for managing Kerberos keytabs.
kvno	prints keyversion numbers of Kerberos principals.
login.krb5	is a kerberized login program.
rcp	is a kerberized rcp client program.
rlogin	is a kerberized rlogin client program.
rsh	is a kerberized rsh client program.
telnet	is a kerberized telnet client program.
telnetd	is a kerberized telnet server.
libcom_err.{so,a}	implements the Kerberos library error code.
libgssapi.{so,a}	contain the Generic Security Service Application Programming Interface (GSSAPI) functions which provides security services to callers in a generic fashion, supportable with a range of underlying mechanisms and technologies and hence allowing source-level portability of applications to different environments.
libkadm5clnt.{so,a}	contains the administrative authentication and password checking functions required by Kerberos 5 client-side programs.
libkadm5srv.{so,a}	contain the administrative authentication and password checking functions required by Kerberos 5 servers.
libkdb5.{so,a}	is a Kerberos 5 authentication/authorization database access library.
libkrb5.{so,a}	is an all-purpose Kerberos 5 library.