Qt4
| Download Source: | ftp://ftp.trolltech.com/qt/source/qt-x11-opensource-src-4.8.5.tar.gz |
|---|
Contents
Introduction to Qt4
Qt is a comprehensive development framework that includes an extensive array of features, capabilities and tools that enable development of high-performance, cross-platform rich-client and server-side applications. Qt is the GUI framework on which KDE is built and Qt4 is the version of Qt that the upcoming KDE4 will use. You can of course use Qt for non-KDE applications as well, but if you wish to use KDE or any KDE-based applications, you must have Qt installed on your system.
Project Homepage: http://www.trolltech.com/products/qt
Dependencies
Required
Optional
- Xinerama provided by and X Window System
- Xfixes provided by and X Window System
- Glib2
- MySQL
- NAS
- CUPS
- PostgreSQL
- unixODBC
- SQLite
- Firebird
Configuration Information
If you would like to compile with MySQL support add the following to the configure command:
-plugin-sql-mysql -I/usr/include/mysql
If you would like to compile with PostgreSQL support add the following to the configure command:
-plugin-sql-psql -I/usr/include/postgresql/server
If you would like to compile with SQLite support add the following to the configure command:
-plugin-sql-sqlite2 -system-sqlite
If you would like to compile with unixODBC support add the following to the configure command:
-plugin-sql-odbc
If you would like to compile with NAS support add the following to the configure command:
-system-nas-sound
If your X Window System is NOT Xorg, then add to configure:
-no-xfixes
Non-Multilib
If you're X Window System prefix is something other then /usr/X11R6 then run the following command to change the hard coded paths in the sources:
for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done
Compile the package:
./configure -prefix /opt/qt-4.8.5 \ -plugindir /usr/lib/plugins -sysconfdir /etc/qt4 \ -qt-gif \ -system-zlib \ -system-libpng \ -system-libjpeg \ -system-libmng \ -no-exceptions \ -tablet && make
Install the package
make install && ln -v -sfn qt-4.8.5 /opt/qt4
Multilib
32Bit
If you're X Window System prefix is something other then /usr/X11R6 then run the following command to change the hard coded paths in the sources:
for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done
Compile the package
export QMAKESPEC=linux-g++-32 &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure -prefix /opt/qt-4.8.5 \
-libdir /opt/qt-4.8.5/lib \
-plugindir /opt/qt-4.8.5/lib/plugins \
-L/usr/lib \
-sysconfdir /etc/qt4 \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-no-exceptions \
-tablet &&
make
Install the package
make install &&
mv -v /opt/qt-4.8.5/bin/qmake{,-32} &&
mv -v /opt/qt-4.8.5/bin/uic{,-32} &&
mv -v /opt/qt-4.8.5/bin/uic3{,-32} &&
mv -v /opt/qt-4.8.5/bin/moc{,-32} &&
mv -v /opt/qt-4.8.5/bin/qtconfig{,-32} &&
mv -v /opt/qt-4.8.5/include/Qt/qconfig{,-32}.h &&
mv -v /opt/qt-4.8.5/include/QtCore/qconfig{,-32}.h
N32
TO BE DONE
64Bit
If you're X Window System prefix is something other then /usr/X11R6 then run the following command to change the hard coded paths in the sources:
for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done
Compile the package
export QMAKESPEC=linux-g++-64 &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure -prefix /opt/qt-4.8.5 \
-libdir /opt/qt-4.8.5/lib64 \
-plugindir /opt/qt-4.8.5/lib64/plugins \
-L/usr/lib64 \
-sysconfdir /etc/qt4 \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-no-exceptions \
-tablet &&
make
Install the package
make install &&
mv -v /opt/qt-4.8.5/bin/qmake{,-64} &&
mv -v /opt/qt-4.8.5/bin/uic{,-64} &&
mv -v /opt/qt-4.8.5/bin/uic3{,-64} &&
mv -v /opt/qt-4.8.5/bin/moc{,-64} &&
mv -v /opt/qt-4.8.5/bin/qtconfig{,-64} &&
mv -v /opt/qt-4.8.5/include/Qt/qconfig{,-64}.h &&
mv -v /opt/qt-4.8.5/include/QtCore/qconfig{,-64}.h
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-4.8.5/bin/qmake &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-4.8.5/bin/uic &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-4.8.5/bin/uic3 &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-4.8.5/bin/moc &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-4.8.5/bin/qtconfig &&
ln -v -sfn qt-4.8.5 /opt/qt4
Create two qconfig.h header files which select the actual architecture-dependent qconfig-{32,64}.h header files:
Creating a Stub Header (Multilib Only)
Creating a Generic Stub Header
cat > /opt/qt-4.8.5/include/Qt/qtconfig.h << "EOF"
/* qtconfig.h - Stub Header */
#ifndef __STUB__QTCONFIG_H__
#define __STUB__QTCONFIG_H__
#if defined(__x86_64__) || \
defined(__sparc64__) || \
defined(__arch64__) || \
defined(__powerpc64__) || \
defined (__s390x__)
# include "qtconfig-64.h"
#else
# include "qtconfig-32.h"
#endif
#endif /* __STUB__QTCONFIG_H__ */
EOF
Creating a Stub Header For Mips
cat > /opt/qt-4.8.5/include/Qt/qtconfig.h << "EOF" /* qtconfig.h - Stub Header */ #ifndef __STUB__QTCONFIG_H__ #define __STUB__QTCONFIG_H__ #include <sgidefs.h> #if (_MIPS_SIM == _ABIO32) # include "qtconfig-32.h" #elif (_MIPS_SIM == _ABIN32) # include "qtconfig-n32.h" #elif (_MIPS_SIM == _ABI64) # include "qtconfig-64.h" #endif #endif /* __STUB__QTCONFIG_H__ */ EOF
Creating a Stub Header (Multilib Only)
Creating a Generic Stub Header
cat > /opt/qt-4.8.5/include/QtCore/qtconfig.h << "EOF"
/* qtconfig.h - Stub Header */
#ifndef __STUB__QTCONFIG_H__
#define __STUB__QTCONFIG_H__
#if defined(__x86_64__) || \
defined(__sparc64__) || \
defined(__arch64__) || \
defined(__powerpc64__) || \
defined (__s390x__)
# include "qtconfig-64.h"
#else
# include "qtconfig-32.h"
#endif
#endif /* __STUB__QTCONFIG_H__ */
EOF
Creating a Stub Header For Mips
cat > /opt/qt-4.8.5/include/QtCore/qtconfig.h << "EOF" /* qtconfig.h - Stub Header */ #ifndef __STUB__QTCONFIG_H__ #define __STUB__QTCONFIG_H__ #include <sgidefs.h> #if (_MIPS_SIM == _ABIO32) # include "qtconfig-32.h" #elif (_MIPS_SIM == _ABIN32) # include "qtconfig-n32.h" #elif (_MIPS_SIM == _ABI64) # include "qtconfig-64.h" #endif #endif /* __STUB__QTCONFIG_H__ */ EOF
Configuring
Non-Multilib
/etc/profile.d/20-qt4.sh
Create an addition to the Bash Startup Files:
cat > /etc/profile.d/20-qt4.sh << "EOF"
# Begin /etc/profile.d/20-qt4.sh
export PATH="${PATH}:/opt/qt4/bin"
export PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH+:}/opt/qt4/lib"
# End /etc/profile.d/20-qt4.sh
EOF
ld.so.conf
cat >> /etc/ld.so.conf << "EOF" && # Begin qt4 addition to /etc/ld.so.conf /opt/qt4/lib # End qt4 addition EOF ldconfig
Multilib
/etc/profile.d/20-qt4.sh
Create an addition to the Bash Startup Files:
cat > /etc/profile.d/20-qt4.sh << "EOF"
# Begin /etc/profile.d/20-qt4.sh
export PATH="${PATH}:/opt/qt4/bin"
export PKG_CONFIG_PATH32="${PKG_CONFIG_PATH32}${PKG_CONFIG_PATH32+:}/opt/qt4/lib"
export PKG_CONFIG_PATHN32="${PKG_CONFIG_PATHN32}${PKG_CONFIG_PATHN32+:}/opt/qt4/lib32"
export PKG_CONFIG_PATH64="${PKG_CONFIG_PATH64}${PKG_CONFIG_PATH64+:}/opt/qt4/lib64"
# End /etc/profile.d/20-qt4.sh
EOF
ld.so.conf
cat >> /etc/ld.so.conf << "EOF" && # Begin qt4 addition to /etc/ld.so.conf /opt/qt4/lib /opt/qt4/lib32 /opt/qt4/lib64 # End qt4 addition EOF ldconfig
