TeTeX
| Download Source: | ftp://tug.ctan.org/tex-archive/systems/unix/teTeX/current/distrib/tetex-src-3.0.tar.gz |
|---|---|
| Required Macros and Fonts: | ftp://tug.ctan.org/tex-archive/systems/unix/teTeX/current/distrib/tetex-texmf-3.0.tar.gz |
| Optional 'texmf' Sources: | ftp://tug.ctan.org/tex-archive/systems/unix/teTeX/current/distrib/tetex-texmfsrc-3.0.tar.gz |
| Optional 'cm-super' Sources: | http://anduin.linuxfromscratch.org/sources/BLFS/svn/t/tetex-cm-super.tar.bz2 |
Contents
Introduction to TeTeX
teTeX is a complete TeX distribution for UNIX compatible systems developed by Thomas Esser. It is based on the web2c distribution which is currently maintained by Olaf Weber.
TeX is a typesetting language developed by Donald Knuth. Instead of visually formatting your text, you type your manuscript text combined with commands in a plain text file. You then run TeX to produce the final layout. Thus, in contrast to standard word processors, the source (TeX commands) is a separate file that does not pretend to be a representation of the final typeset document, and thus can be edited by any text editor.
texmf contains programs to create and manipulate TeX fonts. texmfsrc contains sources for packages that are contained in the texmf tarball. cm-super package contains Type 1 fonts converted from METAFONT fonts and covers entire EC/TC, EC Concrete, EC Bright and LH fonts (Computer Modern font families).
Project Homepage: http://www.tug.org/tetex/
Dependencies
Required
Optional
Non-Multilib
Before building teTeX, the macros and fonts package (texmf tarball) must be installed. Install the macros and fonts using the following commands as the root user:
install -v -d -m755 /usr/share/texmf &&
gzip -dc ../tetex-texmf-3.0.tar.gz \
| (umask 0; cd /usr/share/texmf; tar -xvf -)
If the optional texmfsrc source code tarball was downloaded, unpack it now as the root user:
gzip -dc ../tetex-texmfsrc-3.0.tar.gz \
| (umask 0; cd /usr/share/texmf; tar -xvf -)
Compile the package:
./configure --prefix=/usr \
--enable-shared \
--exec-prefix=/usr \
--bindir=/usr/bin \
--without-texinfo \
--with-x=no \
--with-system-ncurses \
--with-system-zlib &&
make all
Install the package:
make install && texconfig-sys dvips paper letter && texconfig-sys font rw
The paper size may be changed to a4, as is used in most countries.
To install the optional cm-super fonts, perform the following instructions as the root user:
tar -xf ../tetex-cm-super.tar.bz2 &&
FONTDIR=$(kpsewhich --expand-var '$TEXMFMAIN') &&
mkdir -v -p $FONTDIR/fonts/afm/public/cm-super \
$FONTDIR/fonts/type1/public/cm-super \
$FONTDIR/fonts/enc/dvips/cm-super \
$FONTDIR/fonts/map/dvips/cm-super &&
cp -v cm-super/pfb/*.pfb $FONTDIR/fonts/type1/public/cm-super/ &&
gunzip cm-super/afm/* &&
cp -v cm-super/afm/*.afm $FONTDIR/fonts/afm/public/cm-super/ &&
cp -v cm-super/dvips/*.enc $FONTDIR/fonts/enc/dvips/cm-super/ &&
cp -v cm-super/dvips/*.map $FONTDIR/fonts/map/dvips/cm-super/ &&
cat >> $FONTDIR/web2c/updmap.cfg << "EOF" &&
MixedMap cm-super-t1.map
MixedMap cm-super-t2a.map
MixedMap cm-super-t2b.map
MixedMap cm-super-t2c.map
MixedMap cm-super-ts1.map
MixedMap cm-super-x2.map
EOF
mktexlsr &&
updmap-sys &&
unset FONTDIR
Multilib
Before building teTeX, the macros and fonts package (texmf tarball) must be installed. Install the macros and fonts using the following commands as the root user:
install -v -d -m755 /usr/share/texmf &&
gzip -dc ../tetex-texmf-3.0.tar.gz \
| (umask 0; cd /usr/share/texmf; tar -xvf -)
If the optional texmfsrc source code tarball was downloaded, unpack it now as the root user:
gzip -dc ../tetex-texmfsrc-3.0.tar.gz \
| (umask 0; cd /usr/share/texmf; tar -xvf -)
32Bit
Compile the package:
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 \
./configure --prefix=/usr \
--exec-prefix=/usr \
--enable-shared \
--bindir=/usr/bin \
--without-texinfo \
--with-x=no \
--with-system-ncurses \
--with-system-zlib &&
make all
Install the package:
make install
N32
Compile the package:
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 \
./configure --prefix=/usr \
--exec-prefix=/usr --libdir=/usr/lib32 \
--enable-shared \
--bindir=/usr/bin \
--without-texinfo \
--with-x=no \
--with-system-ncurses \
--with-system-zlib &&
[ -f texk/libtool ] && sed -i "/sys_lib_search_path_spec=/s:/lib:&32:g" texk/libtool;
make all
Install the package:
make install
64Bit
Compile the package:
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 \
./configure --prefix=/usr \
--exec-prefix=/usr --libdir=/usr/lib64 \
--enable-shared \
--bindir=/usr/bin \
--without-texinfo \
--with-x=no \
--with-system-ncurses \
--with-system-zlib &&
[ -f texk/libtool ] && sed -i "/sys_lib_search_path_spec=/s:/lib:&64:g" texk/libtool;
make all
Install the package:
make install && texconfig-sys dvips paper letter && texconfig-sys font rw
The paper size may be changed to a4, as is used in most countries.
To install the optional cm-super fonts, perform the following instructions as the root user:
tar -xf ../tetex-cm-super.tar.bz2 &&
FONTDIR=$(kpsewhich --expand-var '$TEXMFMAIN') &&
mkdir -v -p $FONTDIR/fonts/afm/public/cm-super \
$FONTDIR/fonts/type1/public/cm-super \
$FONTDIR/fonts/enc/dvips/cm-super \
$FONTDIR/fonts/map/dvips/cm-super &&
cp -v cm-super/pfb/*.pfb $FONTDIR/fonts/type1/public/cm-super/ &&
gunzip cm-super/afm/* &&
cp -v cm-super/afm/*.afm $FONTDIR/fonts/afm/public/cm-super/ &&
cp -v cm-super/dvips/*.enc $FONTDIR/fonts/enc/dvips/cm-super/ &&
cp -v cm-super/dvips/*.map $FONTDIR/fonts/map/dvips/cm-super/ &&
cat >> $FONTDIR/web2c/updmap.cfg << "EOF" &&
MixedMap cm-super-t1.map
MixedMap cm-super-t2a.map
MixedMap cm-super-t2b.map
MixedMap cm-super-t2c.map
MixedMap cm-super-ts1.map
MixedMap cm-super-x2.map
EOF
mktexlsr &&
updmap-sys &&
unset FONTDIR
