Xorg7/MesaLib
| Download Source: |
|---|
| ftp://ftp.freedesktop.org/pub/mesa/7.9/MesaLib-7.9.tar.gz |
| ftp://ftp.freedesktop.org/pub/mesa/7.9/MesaGLUT-7.9.tar.bz2 |
Back to libdrm
Contents
Introduction to Mesa
Mesa is an OpenGL compatible 3D library. Three packages are available.
- MesaLib - the main Mesa library source code, drivers and documentation.
- MesaGLUT - provides a working libglut.
If you're not interested in running the demos, you'll only need the first package. However, there are a few other packages that can use a GLUT library (such as LibTIFF), so you may wish to install MesaGLUT as well. If you choose to install the demos, extract all three tarballs from the same toplevel directory. All three will extract to the Mesa-7.9 directory.
Homepage: http://www.mesa3d.org/
Dependencies
Required
- Xorg Protocol Headers glproto >=1.4.5
- Xorg Libraries (including the Xdamage protocol)
- Xorg Utilities
- libdrm
- talloc
Optional
Non-Multilib
Configure the package:
./configure $XORG_CONFIG --enable-xcb
Compile the package:
make
Install the package:
make install
== Multilib == ""NEEDS UPDATING""
32Bit
The Mesa source is needed to build Xorg7/Xserver, save the Mesa source tree for use with the build.
mv Mesa-7.9{,-32} &&
cd Mesa-7.9-32
Create a basic configuration for your system. There are many more than linux-dri; execute make to see the list. Each is a file in the configs directory if you wish to research the differences. Replace linux-dri with the basic configuration you have selected:
ln -sf linux-dri configs/current
Regardless of the basic configuration you chose, add the following:
echo 'X11_INCLUDES = $(shell pkg-config --cflags-only-I x11)' >> configs/current &&
echo 'CFLAGS += $(X11_INCLUDES)' >> configs/current &&
echo 'EXTRA_LIB_PATH = $(shell pkg-config --libs-only-L x11)' >> configs/current &&
echo "DRI_DRIVER_INSTALL_DIR = ${XORG_PREFIX}/lib/xorg/modules/dri" >> configs/current &&
echo "INSTALL_DIR = /usr" >> configs/current &&
echo "LIB_DIR = lib" >> configs/current &&
echo "DRI_DIRS += swrast" >> configs/current
If you have XCB installed you also need to add the following to the config:
echo 'DEFINES += -DUSE_XCB' >> configs/current && echo 'X11_INCLUDES += $(shell pkg-config --cflags-only-I xcb x11-xcb xcb-glx)' >> configs/current && echo 'GL_LIB_DEPS += $(shell pkg-config --libs xcb x11-xcb xcb-glx)' >> configs/current
Compile the package:
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
make CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" default
Install the package:
make install
N32
The Mesa source is needed to build Xorg7/Xserver, save the Mesa source tree for use with the build.
mv Mesa-7.9{,-n32} &&
cd Mesa-7.9-n32
Create a basic configuration for your system. There are many more than linux-dri; execute make to see the list. Each is a file in the configs directory if you wish to research the differences. Replace linux-dri with the basic configuration you have selected:
ln -sf linux-dri configs/current
Regardless of the basic configuration you chose, add the following:
echo 'X11_INCLUDES = $(shell pkg-config --cflags-only-I x11)' >> configs/current &&
echo 'CFLAGS += $(X11_INCLUDES)' >> configs/current &&
echo 'EXTRA_LIB_PATH = $(shell pkg-config --libs-only-L x11)' >> configs/current &&
echo "DRI_DRIVER_INSTALL_DIR = ${XORG_PREFIX}/lib32/xorg/modules/dri" >> configs/current &&
echo "INSTALL_DIR = /usr" >> configs/current &&
echo "LIB_DIR = lib32" >> configs/current &&
echo "DRI_DIRS += swrast" >> configs/current
If you have XCB installed you also need to add the following to the config:
echo 'DEFINES += -DUSE_XCB' >> configs/current && echo 'X11_INCLUDES += $(shell pkg-config --cflags-only-I xcb x11-xcb xcb-glx)' >> configs/current && echo 'GL_LIB_DEPS += $(shell pkg-config --libs xcb x11-xcb xcb-glx)' >> configs/current
Compile the package:
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
make CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" default
Install the package:
make install
64Bit
The Mesa source is needed to build Xorg7/Xserver, save the Mesa source tree for use with the build.
mv Mesa-7.9{,-64} &&
cd Mesa-7.9-64
Create a basic configuration for your system. There are many more than linux-dri; execute make to see the list. Each is a file in the configs directory if you wish to research the differences. Replace linux-dri with the basic configuration you have selected:
ln -sf linux-dri configs/current
Regardless of the basic configuration you chose, add the following:
echo 'X11_INCLUDES = $(shell pkg-config --cflags-only-I x11)' >> configs/current &&
echo 'CFLAGS += $(X11_INCLUDES)' >> configs/current &&
echo 'EXTRA_LIB_PATH = $(shell pkg-config --libs-only-L x11)' >> configs/current &&
echo "DRI_DRIVER_INSTALL_DIR = ${XORG_PREFIX}/lib64/xorg/modules/dri" >> configs/current &&
echo "INSTALL_DIR = /usr" >> configs/current &&
echo "LIB_DIR = lib64" >> configs/current &&
echo "DRI_DIRS += swrast" >> configs/current
If you have XCB installed you also need to add the following to the config:
echo 'DEFINES += -DUSE_XCB' >> configs/current && echo 'X11_INCLUDES += $(shell pkg-config --cflags-only-I xcb x11-xcb xcb-glx)' >> configs/current && echo 'GL_LIB_DEPS += $(shell pkg-config --libs xcb x11-xcb xcb-glx)' >> configs/current
Compile the package:
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
make CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" default
Install the package:
make install
If you would like to build and install glxinfo and glxgears execute the following command:
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
make CC="gcc ${BUILD64}" -C progs/xdemos glxinfo glxgears &&
install -m755 -v progs/xdemos/{glxinfo,glxgears} /usr/bin
Forward to xbitmaps
Contents
| Installed Directories: | /usr/include/GLES |
|---|---|
| Installed Programs: | None |
| Installed Libraries: | libGL.so, libGLU.so, libGLw.so, libOSMesa.so, libglut.so |
