CBLFS - User contributions [en]

Shadow

2008-10-30T03:01:00Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://pkg-shadow.alioth.debian.org/pub/pkg-shadow/shadow-{{Shadow-Version}}.tar.bz2
|}

{{Blank-Package-Introduction}}

== Dependencies ==

=== Optional ===
* [[Cracklib]]
* [[PAM Library]]
* [[libaudit]]
* [[libskey]]
* [[SELinux]]

== Configuration Information ==

If you have not installed [[PAM Library]], then use this flag instead of ''--with-libpam'' in the instructions below.

--without-libpam

If you have not installed [[Cracklib]], then remove this flag from the instructions below.

--with-libcrack

== Non-Multilib ==

Configure and compile the package:

./configure --libdir=/lib --sysconfdir=/etc --enable-shared \
--without-audit --without-selinux --with-libcrack --with-libpam &&
sed -i 's/groups$(EXEEXT) //' src/Makefile &&
find man -name Makefile -exec sed -i '/groups.1.xml/d' '{}' \; &&
find man -name Makefile -exec sed -i 's/groups.1 //' '{}' \; &&
make

Install the package:

make install &&
mv -v /usr/bin/passwd /bin

== Multilib ==

=== 32Bit ===

Configure and compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/lib -sysconfdir=/etc --enable-shared \
--without-audit --without-selinux --with-libcrack --with-libpam &&
sed -i 's/groups$(EXEEXT) //' src/Makefile &&
find man -name Makefile -exec sed -i '/groups.1.xml/d' '{}' \; &&
find man -name Makefile -exec sed -i 's/groups.1 //' '{}' \; &&
make

Install the package:

make install &&
mv -v /usr/bin/passwd /bin

=== N32 ===

Configure and compile the package:

CC="gcc ${BUILDN32}" ./configure --libdir=/lib32 -sysconfdir=/etc --enable-shared \
--without-audit --without-selinux --with-libcrack --with-libpam &&
sed -i 's/groups$(EXEEXT) //' src/Makefile &&
find man -name Makefile -exec sed -i '/groups.1.xml/d' '{}' \; &&
find man -name Makefile -exec sed -i 's/groups.1 //' '{}' \; &&
make

Install the package:

make install &&
mv -v /usr/bin/passwd /bin

=== 64Bit ===

CC="gcc ${BUILD64}" ./configure --libdir=/lib64 -sysconfdir=/etc --enable-shared \
--without-audit --without-selinux --with-libcrack --with-libpam &&
sed -i 's/groups$(EXEEXT) //' src/Makefile &&
find man -name Makefile -exec sed -i '/groups.1.xml/d' '{}' \; &&
find man -name Makefile -exec sed -i 's/groups.1 //' '{}' \; &&
make

Install the package:

make install &&
mv -v /usr/bin/passwd /bin

== Configuring ==

=== login.defs ===

Setup Configuration files:

cp etc/login.defs /etc/login.defs
sed -i -e 's@#MD5_CRYPT_ENAB.no@MD5_CRYPT_ENAB yes@' \
-e 's@/var/spool/mail@/var/mail@' \
-e 's@DICTPATH.*@DICTPATH\t/lib/cracklib/pw_dict@' /etc/login.defs

FUNCTIONS="LASTLOG_ENAB MAIL_CHECK_ENAB PORTTIME_CHECKS_ENAB CONSOLE MOTD_FILE
NOLOGINS_FILE PASS_MIN_LEN SU_WHEEL_ONLY MD5_CRYPT_ENAB CONSOLE_GROUPS
ENVIRON_FILE ULIMIT ENV_TZ ENV_HZ ENV_SUPATH ENV_PATH QMAIL_DIR MAIL_DIR
MAIL_FILE CHFN_AUTH FAILLOG_ENAB QUOTAS_ENAB FTMP_FILE OBSCURE_CHECKS_ENAB
CRACKLIB_DICTPATH PASS_CHANGE_TRIES PASS_ALWAYS"
for function in $FUNCTIONS; do
sed -i "s/^$function/# &/" /etc/login.defs
done

=== [[Linux-PAM]] Services ===

==== /etc/pam.d/login ====

This is the file that controls the login program

cat > /etc/pam.d/login << "EOF"
#%PAM-1.0
#
# The common PAM configuration file for login
#
auth required pam_shells.so
auth include system-auth
auth optional pam_securetty.so

account required pam_nologin.so
account include system-auth

password include system-auth

session include system-auth
session required pam_mkhomedir.so skel=/etc/skel/ umask=0022
session optional pam_lastlog.so nowtmp
session optional pam_mail.so dir=/var/mail standard
EOF

Also make sure '''/etc/shells''' exists because the '''pam_shells.so''' module will only permit a login if your users login shell appears in '''/etc/shells'''.

==== /etc/pam.d/{chage chfn chgpasswd chpasswd chsh groupadd groupdel groupmems groupmod newusers passwd useradd userdel usermod} ====

These are the files that control changing of a password

for file in chage chfn chgpasswd chpasswd chsh groupadd groupdel groupmems \
groupmod newusers passwd useradd userdel usermod; do
cat > /etc/pam.d/$file << "EOF"
#%PAM-1.0
#
# The common PAM configuration file authentication only, root ok
#
auth sufficient pam_rootok.so

account required pam_permit.so
account include system-auth

password include system-auth
EOF
done

==== /etc/pam.d/su ====

This is the file that controls su access

cat > /etc/pam.d/su << "EOF"
#%PAM-1.0
#
# The common PAM configuration file for su
#
auth sufficient pam_rootok.so
auth include system-auth

account include system-auth

password include system-auth

session include system-auth
session optional pam_xauth.so
EOF

=== Where to go? ===

See [[Configuring for Adding Users]]

==Contents==

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
|login, su, nologin, faillog, lastlog, chage, chfn, chsh, expiry, gpasswd, newgrp, passwd, chgpasswd, chpasswd, groupadd, groupdel, groupmems, groupmod, grpck, grpconv, grpunconv, logoutd, newusers, pwck, pwconv, pwunconv, useradd, userdel, usermod, vipw
|-valign="top"
! Installed Libraries:
|
|-valign="top"
! Installed Directories:
| /etc/pam.d
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! expiry
| Checks and enforces the current password expiration policy
|-valign="top"
! faillog
| Is used to examine the log of login failures, to set a maximum number of failures before an account is blocked, or to reset the failure count
|-valign="top"
! gpasswd
| Is used to add and delete members and administrators to groups
|-valign="top"
! groupadd
| Creates a group with the given name
|-valign="top"
! groupdel
| Deletes the group with the given name
|-valign="top"
! groupmod
| Is used to modify the given group's name or GID
|-valign="top"
! grpck
| Verifies the integrity of the group files /etc/group and /etc/gshadow
|-valign="top"
! grpconv
| Creates or updates the shadow group file from the normal group file
|-valign="top"
! grpunconv
| Updates /etc/group from /etc/gshadow and then deletes the latter
|-valign="top"
! lastlog
| Reports the most recent login of all users or of a given user
|-valign="top"
! login
| Is used by the system to let users sign on
|-valign="top"
! logoutd
| Is a daemon used to enforce restrictions on log-on time and ports
|-valign="top"
! newgrp
| Is used to change the current GID during a login session
|-valign="top"
! newusers
| Is used to create or update an entire series of user accounts
|-valign="top"
! nologin
| Displays a message that an account is not available. Designed to be used as the default shell for accounts that have been disabled
|-valign="top"
! passwd
| Is used to change the password for a user or group account
|-valign="top"
! pwck
| Verifies the integrity of the password files /etc/passwd and /etc/shadow
|-valign="top"
! pwconv
| Creates or updates the shadow password file from the normal password file
|-valign="top"
! pwunconv
| Updates /etc/passwd from /etc/shadow and then deletes the latter
|-valign="top"
! sg
| Executes a given command while the user's GID is set to that of the given group
|-valign="top"
! su
| Runs a shell with substitute user and group IDs
|-valign="top"
! useradd
| Creates a new user with the given name, or updates the default new-user information
|-valign="top"
! userdel
| Deletes the given user account
|-valign="top"
! usermod
| Is used to modify the given user's login name, User Identification (UID), shell, initial group, home directory, etc.
|-valign="top"
! vigr
| Edits the /etc/group or /etc/gshadow files
|-valign="top"
! vipw
| Edits the /etc/passwd or /etc/shadow files
|}

Template:FAAD2-Version

2008-10-30T02:38:24Z

Bigdissaved:

2.6.1

BroadCom

2008-10-28T04:43:57Z

Bigdissaved: Fnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download 32bit Source:
| http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_32_5_10_27_6.tar.gz
|-
!Download 64bit Source:
| http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_64_5_10_27_6.tar.gz
|}

----

{{Package-Introduction|These packages contain Broadcom's IEEE 802.11a/b/g/n hybrid Linux® device driver for use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322-based hardware. There are different tars for 32-bit and 64-bit x86 CPU architectures. Make sure that you download the appropriate tar because the hybrid binary file must be of the appropriate architecture type. The hybrid binary file is agnostic to the specific version of the Linux kernel because it is designed to perform all interactions with the operating system through operating-system-specific files and an operating system abstraction layer file. All Linux operating-system-specific code is provided in source form, making it possible to retarget to different kernel versions and fix operating system related issues.

NOTE: You must read the LICENSE.TXT file in the lib directory before using this software.|http://www.broadcom.com/support/802.11/linux_sta.php}}

== Dependencies ==

=== Required ===

*Kernel Sources
*Kernel Module "802.11 TKIP crypto"

== Non-Multilib 32 ==

Clean the source tree: (Insert the current running kernel version in <2.6.xx.xx>)

make -C /lib/modules/<2.6.xx.xx>/build M=`pwd` clean

Compile the package:

make -C /lib/modules/<2.6.xx.xx>/build M=`pwd`

{{Note| Make sure to remove the b43 module and b43legacy module before inserting the wl.ko module}}

Install the package:

cp wl.ko /lib/modules/<2.6.xx.xx>/kernel
depmod

Insert the Module:

modprobe ieee80211_crypt_tkip
modprobe wl

== Multilib ==

Please Contribute this section.

BroadCom

2008-10-26T07:14:25Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download 32bit Source:
| http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_32_5_10_27_6.tar.gz
|-
!Download 64bit Source:
| http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_64_5_10_27_6.tar.gz
|}

----

{{Package-Introduction|These packages contain Broadcom's IEEE 802.11a/b/g/n hybrid Linux® device driver for use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322-based hardware. There are different tars for 32-bit and 64-bit x86 CPU architectures. Make sure that you download the appropriate tar because the hybrid binary file must be of the appropriate architecture type. The hybrid binary file is agnostic to the specific version of the Linux kernel because it is designed to perform all interactions with the operating system through operating-system-specific files and an operating system abstraction layer file. All Linux operating-system-specific code is provided in source form, making it possible to retarget to different kernel versions and fix operating system related issues.

NOTE: You must read the LICENSE.TXT file in the lib directory before using this software.|http://www.broadcom.com/support/802.11/linux_sta.php}}

== Dependencies ==
THIS PAGE IS NOT COMPLETTE!!

DO NOT USE BUILD INSTRUCTIONS!!!!!!!!!!

http://www.broadcom.com/docs/linux_sta/README.txt

http://jaux.net/uploads/2008/10/hybrid_wl-5.10.27.6_patch-2.6.27-ARCH
=== Required ===
* Kernel Source

== Non-Multilib 32 ==

Clean the source tree: (Insert the current running kernel version in <2.6.xx.xx>)

make -C /lib/modules/<2.6.xx.xx>/build M=`pwd` clean

Compile the package:

make -C /lib/modules/<2.6.xx.xx>/build M=`pwd`

{{Note| Make sure to remove the b43 module and b43legacy module before inserting the wl.ko module}}

Install the package:

cp wl.ko /lib/modules/<2.6.xx.xx>/kernel
depmod

Insert the

== Multilib ==

Please Contribute this section.

PyGTK

2008-10-25T06:02:29Z

Bigdissaved: fix deps

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ftp.gnome.org/pub/GNOME/sources/pygtk/{{PyGTK-Version2}}/pygtk-{{PyGTK-Version}}.tar.bz2
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

=== Required ===
* [[Python]]
* [[PyGObject]]
* [[Gtk2]]
* [[pycairo]]
=== Optional ===
* [[libglade]]
* [[Numeric]]

'''''PyGTK may not compile properly if [[pycairo]] is not installed.'''''

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install the package:

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install &&
unset USE_ARCH

Rsync

2008-10-21T00:30:22Z

Bigdissaved: fix botscript, now using bootscript package

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://samba.anu.edu.au/ftp/rsync/src/rsync-{{Rsync-Version}}.tar.gz
|-
!Optional (ACL) Patch:
| http://svn.cross-lfs.org/svn/repos/patches/rsync/rsync-{{Rsync-Version}}-acl-2.patch
|}

----
{{Package-Introduction|According to it's website, rsync is an open source utility that provides fast incremental file transfer.|http://samba.org/rsync/}}

== Dependencies ==

=== Optional ===
* [[Popt]] (Has an included version)
* [[Acl]]

== Creating the rsyncd User/Group ==

groupadd -g 49 rsyncd &&
useradd -c "rsyncd Daemon" -d /home/rsync -g rsyncd -s /bin/false -u 49 rsyncd

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../rsync-{{Rsync-Version}}-acl-1.patch &&
./configure --prefix=/usr --enable-acl-support &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

patch -Np1 -i ../rsync-{{Rsync-Version}}-acl-1.patch &&
CC="gcc ${BUILD32}" \
./configure --prefix=/usr --enable-acl-support &&
make

Install the package:

make install

=== N32 ===

Compile the package:

patch -Np1 -i ../rsync-{{Rsync-Version}}-acl-1.patch &&
CC="gcc ${BUILDN32}" \
./configure --prefix=/usr --enable-acl-support &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

patch -Np1 -i ../rsync-{{Rsync-Version}}-acl-1.patch &&
CC="gcc ${BUILD64}" \
./configure --prefix=/usr --enable-acl-support &&
make

Install the package:

make install

== Configuring ==

If you would like to run the daemon create a config file and then the bootscript.

=== rsyncd.conf ===

Example configuration, See rsyncd.conf{5} and/or http://rsync.samba.org/documentation.html for more information:

cat > /etc/rsyncd.conf << "EOF"
motd file = /home/rsync/welcome.msg
use chroot = yes
uid = rsyncd
gid = rsyncd

[localhost]
path = /home/rsync
comment = Default rsync module
read only = yes
list = yes
EOF

=== Bootscript ===

Install the init script provided by the [[bootscripts]] package:

make install-rsyncd

Template:Wpa supplicant-Version

2008-10-20T04:45:15Z

Bigdissaved:

0.6.4

WPA Supplicant

2008-10-20T04:34:24Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://hostap.epitest.fi/releases/wpa_supplicant-{{wpa_supplicant-Version}}.tar.gz
|}

----

{{Package-Introduction|Twpa_supplicant is a WPA Supplicant for Linux, BSD, Mac OS X, and Windows with support for WPA and WPA2 (IEEE 802.11i / RSN). It is suitable for both desktop/laptop computers and embedded systems. Supplicant is the IEEE 802.1X/WPA component that is used in the client stations. It implements key negotiation with a WPA Authenticator and it controls the roaming and IEEE 802.11 authentication/association of the wlan driver.

wpa_supplicant is designed to be a "daemon" program that runs in the background and acts as the backend component controlling the wireless connection. wpa_supplicant supports separate frontend programs and a text-based frontend (wpa_cli) and a GUI (wpa_gui) are included with wpa_supplicant.

wpa_supplicant uses a flexible build configuration that can be used to select which features are included. This allows minimal code size (from ca. 50 kB binary for WPA/WPA2-Personal and 130 kB binary for WPA/WPA2-Enterprise without debugging code to 450 kB with most features and full debugging support; these example sizes are from a build for x86 target). | http://hostap.epitest.fi/wpa_supplicant/}}

== Dependencies ==
=== Optional ===
* [[D-BUS]]
=== Optional Drivers ===
* [[MadWifi]]
* [[NdisWrapper]]

== Configuration Information ==

You need to create a '''.config''' file based on '''defconfig''' in the top-level of the source directory. The '''README''' has a lot of good information regarding creating a config.

cp defconfig .config &&
cat >> .config << "EOF"
CONFIG_DRIVER_MADWIFI=y
CFLAGS += -I/path/to/madwifi/source
CONFIG_CTRL_IFACE_DBUS=y
EOF

== Non-Multilib ==

Compile the package:

make

Install the package

cp -v wpa_cli wpa_supplicant wpa_passphrase /usr/sbin

If you have [[D-BUS]] installed execute the following commands to add the configuration and services files for [[D-BUS]]:

cp -v dbus-wpa_supplicant.conf /etc/dbus-1/system.d/ &&
cp -v dbus-wpa_supplicant.service /usr/share/dbus-1/services/

== Multilib ==
'''''This package does not install any libraries so only one installation is needed.'''''

=== 32Bit ===

Please Contribute this section.

=== N32 ===

Please Contribute this section.

=== 64Bit ===

Please Contribute this section.

BroadCom

2008-10-20T03:53:20Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download 32bit Source:
| http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_32_5_10_27_6.tar.gz
|-
!Download 64bit Source:
| http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_64_5_10_27_6.tar.gz
|}

----

{{Package-Introduction|These packages contain Broadcom's IEEE 802.11a/b/g/n hybrid Linux® device driver for use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322-based hardware. There are different tars for 32-bit and 64-bit x86 CPU architectures. Make sure that you download the appropriate tar because the hybrid binary file must be of the appropriate architecture type. The hybrid binary file is agnostic to the specific version of the Linux kernel because it is designed to perform all interactions with the operating system through operating-system-specific files and an operating system abstraction layer file. All Linux operating-system-specific code is provided in source form, making it possible to retarget to different kernel versions and fix operating system related issues.

NOTE: You must read the LICENSE.TXT file in the lib directory before using this software.|http://www.broadcom.com/support/802.11/linux_sta.php}}

== Dependencies ==
THIS PAGE IS NOT COMPLETTE!!

DO NOT USE BUILD INSTRUCTIONS!!!!!!!!!!

http://www.broadcom.com/docs/linux_sta/README.txt

http://jaux.net/uploads/2008/10/hybrid_wl-5.10.27.6_patch-2.6.27-ARCH
=== Required ===
* Kernel Source

== Non-Multilib ==

Compile the package:

make

Install the package

make BINDIR=/usr/bin MANDIR=/usr/share/man install

== Multilib ==

Please Contribute this section.

BroadCom

2008-10-20T02:30:52Z

Bigdissaved: New page: {| style="text-align: left; background-color: AliceBlue;" |- !Download 32bit Source: | http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_32_5_10_27_6.tar.gz |- !Download 64bit Sour...

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download 32bit Source:
| http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_32_5_10_27_6.tar.gz
|-
!Download 64bit Source:
| http://www.broadcom.com/docs/linux_sta/hybrid-portsrc-x86_64_5_10_27_6.tar.gz
|}

----

{{Package-Introduction|These packages contain Broadcom's IEEE 802.11a/b/g/n hybrid Linux® device driver for use with Broadcom's BCM4311-, BCM4312-, BCM4321-, and BCM4322-based hardware. There are different tars for 32-bit and 64-bit x86 CPU architectures. Make sure that you download the appropriate tar because the hybrid binary file must be of the appropriate architecture type. The hybrid binary file is agnostic to the specific version of the Linux kernel because it is designed to perform all interactions with the operating system through operating-system-specific files and an operating system abstraction layer file. All Linux operating-system-specific code is provided in source form, making it possible to retarget to different kernel versions and fix operating system related issues.

NOTE: You must read the LICENSE.TXT file in the lib directory before using this software.[http://www.broadcom.com/support/802.11/linux_sta.php}}

== Getting the source ==

If you have [[Subversion]] installed issue the following command to download the source:

svn checkout http://svn.madwifi.org/madwifi/trunk madwifi

You may also want to create a tarball to use at a later time:

tar cvjpf madwifi-r$(svnversion madwifi).tar.bz2 madwifi

== Dependencies ==

=== Required ===
* [[Subversion]] (To Get Source)
* Kernel Source

== Non-Running Kernel ==

If you're attempting to build Madwifi for a kernel that's not currently running, also pass the following to '''make''' and '''make install'''.

KERNELPATH=/path/to/kernel/source

'''KERNELPATH''' defaults to '''/lib/modules/`uname -r`/build'''.

== Non-Multilib ==

Compile the package:

make

Install the package

make BINDIR=/usr/bin MANDIR=/usr/share/man install

== Multilib ==

Please Contribute this section.

Main Page

2008-10-20T02:27:24Z

Bigdissaved: /* Network Drivers */

Welcome to Community Driven BLFS.

== NOTICE ==

'''Please don't add information from BLFS without acknowledging the source. BLFS is copyrighted but copying is allowed with attribution.'''

When adding packages please add a CONTENT section so everyone knows what the package does. Thank you. You can find a script [[User:Weibullguy|here]] that can be used to make this task reasonably pain free. The script even formats the output so a simple copy and paste is all you need to do (in most cases).

If you have problems building any packages in CBLFS and are unable to find the solution yourself, please do not use the "Talk" section associated with the package. You will receive no help, but your entry will be deleted. Most of the CLFS and CBLFS developers and users hang out at chat.freenode.net in the #cross-lfs channel. Your odds of receiving help dramatically improve if you stop by #cross-lfs or post on the mailing list.

== What is Community Driven BLFS ==

Community Driven BLFS (CBLFS) is an open project that takes over after you have completed a Cross-LFS based build. While there's a veritable [[Who's Who]] of CBLFS, as the name implies anyone in the community may contribute. Your contributions are welcome; from multilib build instructions for Open Office to spelling and grammar corrections. You can find a list of packages that are referenced but still need build instructions in the [http://cblfs.cross-lfs.org/index.php/Special:Wantedpages Wanted Pages] if you don't have anything particular in mind.

There are only three requirements and one strong suggestion for contributing to CBLFS. First, read and heed the applicable portions of the '''NOTICE''' section above. Second, please follow the page format that is set. There is a link to the page template below. Explanatory comments are in bold green text and should, obviously, be removed. Always check the template as changes ''are'' made periodically.

Third, upload patches in accordance with the instructions below. These instructions will help you create and format the file before uploading. Please don't provide links to patches or other files stored on your personal server.

Finally, there are many good open-source spell checking applications. In fact, there are build instructions for [[Aspell]] in this wiki. Please install and use a spell checker when contributing.

* [[Page_Template|Page Template]]
* [[How to upload patches]]
* [[License]]

In addition to this Wiki, you may also be interested in visting the [http://hints.cross-lfs.org/index.php/Main_Page CLFS-Hints Wiki].

== Post CLFS Configuration ==
* [[Bash Startup Files]]
* [[System User and Groups]]
* [[Configuring for Adding Users]]
* [[Creating an Initramfs]]

= Packages in the Wiki =

== [[:Category:Security|Security]] ==
<dpl>category=Security</dpl>

== [[:Category:Block Device|Block Device]] ==
<dpl>category=Block Device</dpl>

== [[:Category:File System|File System]] ==
<dpl>category=File System</dpl>

== [[:Category:Hardware Monitoring|Hardware Monitoring]] ==
<dpl>category=Hardware Monitoring</dpl>

== [[:Category:Text Editors|Text Editors]] ==
<dpl>category=Text Editors</dpl>

== General Libraries ==
* [[Acl]]
* [[Aspell]]
* [[Hspell]]
* [[Attr]]
* [[c-ares]]
* [[CHMlib]]
* [[CLucene]]
* [[cpufrequtils]]
* [[Dante]]
* [[DBH]]
* [[Dynamite]]
* [[Eventlog]]
* [[Exempi]]
* [[Expat]]
* [[Gamin]]
* [[GDBM]]
* [[Glib1]]
* [[Glib2]]
* [[Glibmm]]
* [[GMime]]
* [[GnuTLS]]
* [[GOB2]]
* [[GtkUnique]]
* [[gwenhywfar]]
* [[libarchive]]
* [[libassuan]]
* [[libavc1394]]
* [[libcap]]
* [[Libcfg]]
* [[libchipcard]]
* [[libcroco]]
* [[libdbi]]
* [[libdbi-drivers]]
* [[libdc1394]]
* [[libebml]]
* [[libevent]]
* [[libextractor]]
* [[libgalago]]
* [[LibGCrypt]]
* [[Libggz]]
* [[LibGPG-Error]]
* [[Libgpod]]
* [[libiec61883]]
* [[libieee1284]]
* [[libipoddevice]]
* [[libksba]]
* [[libdaemon]]
* [[libgssapi]]
* [[libgssglue]]
* [[libgsf]]
* [[libgtkhtml]]
* [[libidn]]
* [[libical]]
* [[LibIDL]]
* [[libmal]]
* [[libmspack]]
* [[libnfsidmap]]
* [[liboil]]
* [[libpqxx]]
* [[libptp2]]
* [[libraw1394]]
* [[librpcsecgss]]
* [[Libsigc++]]
* [[libssh2]]
* [[libstroke]]
* [[libsynce]]
* [[LibtASN1]]
* [[libusb]]
* [[libwpd]]
* [[libxml++]]
* [[LibXML2]]
* [[LibXSLT]]
* [[LZO]]
* [[LZO2]]
* [[Meanwhile]]
* [[MIT krb5]] | [[Heimdal]]
* [[OpenCDK]]
* [[Ortp]]
* [[Pcre]]
* [[Popt]]
* [[PhysicsFS]]
* [[S-Lang]]
* [[SQLite]]
* [[SQLite3]]
* [[t1lib]]
* [[TCL]]
* [[TCP Wrappers]]
* [[Unshield]]
* [[Wv]]
* [[Wv2]]
* [[Xerces-C++]]
* [[Xalan-C++]]

== Graphics and Font Libraries ==
* [[AAlib]]
* [[Dcraw]]
* [[Exiv2]]
* [[FLTK]]
* [[FreeGLUT]]
* [[FreeType]]
* [[FriBidi]]
* [[FontConfig]]
* [[GD]]
* [[GifLib]]
* [[glitz]]
* [[GtkSpell]]
* [[IlmBase]]
* [[Imlib]]
* [[Imlib2]]
* [[JasPer]]
* [[JBIG-Kit]]
* [[kipi-plugins]]
* [[KSquirrel-libs]]
* [[libart_lgpl]]
* [[libexif]]
* [[libexif-gtk]]
* [[libjpeg]]
* [[libkdcraw]]
* [[libkexif]]
* [[libkexiv2]]
* [[libkipi]]
* [[libwmf]]
* [[libmng]]
* [[libpng]]
* [[librsvg]]
* [[LibTIFF]]
* [[little cms]]
* [[Netpbm]]
* [[OpenEXR]]
* [[PLIB]]
* [[Tk]]
* [[UFRaw]]
* [[VTK]]

== General Utilities ==
* [[Acpid]]
* [[afio]]
* [[bash-completion]]
* [[bash-completion-config]]
* [[Bc]]
* [[boost]]
* [[cabextract]]
* [[ConsoleKit]]
* [[Console-tools]]
* [[cpio]]
* [[D-BUS]]
* [[Desktop-file-utils]]
* [[Dialog]]
* [[eject]]
* [[emelFM2]]
* [[Fcron]]
* [[FontForge]]
* [[FUSE]]
* [[gcolor2]]
* [[gnokii]]
* [[GNU Pth]]
* [[GParted]]
* [[GPM]]
* [[Gtk-Doc]]
* [[HAL]]
* [[hal-info]]
* [[hdparm]]
* [[Hyperestraier]]
* [[hwinfo]]
* [[initng]]
* [[initng-conf-gtk]]
* [[Intltool]]
* [[iso-codes]]
* [[logrotate]]
* [[Lomoco]]
* [[mc]]
* [[Orange]]
* [[Parted]]
* [[PCI Utilities]]
* [[Pilot-Link]]
* [[pinentry]]
* [[pkg-config]]
* [[pmount]]
* [[PodSleuth]]
* [[PolicyKit]]
* [[QDBM]]
* [[rkhunter]]
* [[rpm2cpio]]
* [[rpm2targz]]
* [[Screen]]
* [[ScrollKeeper]]
* [[sdparm]]
* [[sg3_utils]]
* [[Sharutils]]
* [[Star]]
* [[Strigi]]
* [[Syslog-ng]]
* [[Sysfsutils]]
* [[Tidy]]
* [[unifdef]]
* [[UnixODBC]]
* [[unrar]]
* [[Unzip]]
* [[usbutils]]
* [[Vixie-Cron]]
* [[Wget]]
* [[Which]]
* [[xdelta]]
* [[xmlto]]
* [[Zip]]

== Programming ==
* [[ACPICA]]
* [[Apache Ant]]
* [[APR]]
* [[APR-util]]
* [[Autogen]]
* [[BJam]]
* [[ccache]]
* [[Check]]
* [[Chicken]]
* [[CMake]]
* [[CppUnit]]
* [[ctags]]
* [[DDD]]
* [[DejaGnu]]
* [[Dev86]]
* [[DevHelp]]
* [[Distcc]]
* [[Doxygen]]
* [[Expect]]
* [[gc]]
* [[GCC]]
* [[GCC-3.3]] (libstdc++.so.5)
* [[GCL]]
* [[GDB]]
* [[GDL]]
* [[Geany]]
* [[Kommander]]
* [[libfc]]
* [[libgda]]
* [[libglade]]
* [[libglademm]]
* [[Gengetopt]]
* [[Glade2]]
* [[Glade3]]
* [[GMP]]
* [[Gperf]]
* [[Graphviz]]
* [[Guile]]
* [[Guile-GTK]]
* [[iiview]]
* [[Jam]]
* [[JDK]]
* [[Log4cxx]]
* [[Lua]]
* [[MPFR]]
* [[NASM]]
* [[Objective Caml]]
* [[OpenJDK]]
* [[Perl Modules]]
* [[PHP]]
* [[Python]]
* [[Python Modules]]
* [[RLog]]
* [[Ruby]]
* [[SWIG]]
* [[smake]]
* [[Strace]]
* [[Valgrind]]
* [[XPontus]]
* [[Yasm]]

== C# ==
* [[Evolution-Sharp]]
* [[Galago-Sharp]]
* [[Gnome-Sharp]]
* [[Gsf-Sharp]]
* [[Gtk-Sharp]]
* [[libgdiplus]]
* [[Mono]]
* [[Mono-Addins]]
* [[Monodoc]]

== [[:Category:Source Code Management|Source Code Management]] ==
<dpl>category=Source Code Management</dpl>

== Networking ==
* [[aria2]]
* [[arno-iptables-firewall]]
* [[Avahi]]
* [[BIND]]
* [[BIND Utilities]]
* [[bluez]]
* [[bluez-libs]]
* [[bluez-utils]]
* [[Dhcpcd]]
* [[Curl]]
* [[curlftpfs]]
* [[FreeNX]]
* [[ifplugd]]
* [[iptables]]
* [[libbtctl]]
* [[libpcap]]
* [[imap c-client]]
* [[mDNSResponder]]
* [[minicom]]
* [[Netplug]]
* [[NetTools]]
* [[OpenOBEX]]
* [[OpenSLP]]
* [[PPP]]
* [[SSHFS]]
* [[SWAT]]
* [[Wireless tools]]
* [[WPA Supplicant]]
* [[Xinetd]]

== Network Drivers ==
* [[MadWifi]]
* [[NdisWrapper]]
* [[BroadCom]] (BCM4311 BCM4312 BCM4321 BCM4322)

== Networking Libraries ==
* [[libdownload]]
* [[libnl]]
* [[librsync]]
* [[libsoup]]
* [[neon]]

== Network Applications ==
* [[bridge-utils]]
* [[Dhcdbd]]
* [[dvb-apps]]
* [[netcat]]
* [[net-Snmp]]
* [[netstat]]
* [[NetworkManager]]
* [[Nmap]]
* [[NTP]]
* [[OpenVPN]]
* [[Portmap]]
* [[qca2]]
* [[rdesktop]]
* [[RRDTool]]
* [[socat]]
* [[TCPDump]]
* [[Traceroute]]
* [[TSClient]]
* [[Whois]]
* [[Wireshark]]

== Web Browser/Mail/News/Chat/P2P/FTP Clients ==
* [[Ekiga]]
* [[Fetchmail]]
* [[gFTP]]
* [[irssi]]
* [[Kermit]]
* [[Links]]
* [[Lynx]]
* [[microdc2]]
* [[Mutt]]
* [[Postfix]]
* [[Procmail]]
* [[Sim]]
* [[sSMTP]]
* [[Trix]]
* [[weechat]]

== Servers ==
* [[Apache]]
* [[Berkeley DB]]
* [[Courier-Authlib]]
* [[Courier-IMAP]]
* [[Dhcp]]
* [[Exim]]
* [[MySQL]]
* [[nginx]]
* [[NFS Utilities]]
* [[OpenLDAP]]
* [[OpenSSH]]
* [[PostgreSQL]]
* [[ProFTPD]]
* [[Qmail]]
* [[Rarpd]]
* [[Rsnapshot]]
* [[Rsync]]
* [[Samba]]
* [[Sendmail]]
* [[Squid]]
* [[Squirrelmail]]
* [[tftp-hpa]]
* [[Vsftpd]]

== [[:Category:Shells|Shells]] ==
<dpl>category=Shells</dpl>

== [[:Category:Power Management|Power Management]] ==
<dpl>category=Power Management</dpl>

== X ([[X Window System]]) ==
* [[Xorg6]]
* [[Xorg7/Intro|Xorg7]]

== X Libraries ==
* [[ATK]]
* [[Beagle]]
* [[Cairo]]
* [[Cairomm]]
* [[DjVuLibre]]
* [[goffice]]
* [[Gtk1]]
* [[Gtk2]]
* [[Gtk+-Extras]]
* [[Gtkmm]]
* [[Gtk-Qt-Engine]]
* [[Gtk-vnc]]
* [[hicolor-icon-theme]]
* [[icon-naming-utils]]
* [[LessTif]]
* [[libcm]]
* [[libnotify]]
* [[libsexy]]
* [[libwnck]]
* [[libxklavier]]
* [[notification-daemon]]
* [[Pango]]
* [[Poppler]]
* [[Qt3]]
* [[Qt4]]
* [[Shared-MIME-Info]]
* [[startup-notification]]
* [[Tapioca-qt]]
* [[Telepathy-qt]]
* [[Tracker]]
* [[wxWidgets]]
* [[Xaw3d]]
* [[XCB]]

== Desktops/Window Managers ==
* [[AfterStep]]
* [[Blackbox]]
* [[Compiz Fusion]]
* [[dr17]]
* [[Fluxbox]]
* [[Fvwm]]
* [[Gnome]]
* [[Icewm]]
* [[iDesk]]
* [[KDE]]
* [[KDE4]]
* [[Metacity]]
* [[ratpoison]]
* [[vtwm]]
* [[Xfce]]
* [[Lxde]]

== X Window Applications ==
* [[3DDesktop]]
* [[aDesklets]]
* [[Avant Window Navigator]]
* [[Beryl]]
* [[Conky]]
* [[Gkrellm]]
* [[Krusader]]
* [[KXDocker]]
* [[Pdfedit]]
* [[QuickSynergy]]
* [[Slim]]
* [[Synergy2]]
* [[XDaliClock]]
* [[Xpdf]]
* [[XScreenSaver]]
* [[Yakuake]]

== X Web Browser/Mail/News/Chat/P2P Clients ==
* [[aMule]]
* [[Evolution]]
* [[Firefox]]
* [[Gtk-Gnutella]]
* [[Ktorrent]]
* [[Ktorrent-KDE4]]
* [[Linuxdcpp]]
* [[Mldonkey]]
* [[Mozilla]]
* [[Pidgin]]
* [[Rtorrent]]
* [[SeaMonkey]]
* [[Sylpheed]]
* [[Thunderbird]]
* [[Xchat]]

== Media and Libraries ==
* [[ALSA]]
* [[ALUT]]
* [[Audio File]]
* [[DivX4Linux]]
* [[EsounD]]
* [[eSpeak]]
* [[FAAC]]
* [[FAAD2]]
* [[FLAC]]
* [[Gpac]]
* [[GStreamer]]
* [[Id3lib]]
* [[libburn]]
* [[Liba52]]
* [[Libao]]
* [[libcaca]]
* [[libcddb]]
* [[libcdio]]
* [[Libdv]]
* [[libdvbpsi]]
* [[libdvdcss]]
* [[libdvdnav]]
* [[Libdvdread]]
* [[libFAME]]
* [[libid3]]
* [[libid3tag]]
* [[libisofs]]
* [[libogg]]
* [[libopendaap]]
* [[libvorbis]]
* [[libmad]]
* [[libmatroska]]
* [[libmikmod]]
* [[libmodplug]]
* [[libmpd]]
* [[libmpeg2]]
* [[LibMPEG3]]
* [[libmtp]]
* [[libMusicBrainz]]
* [[libnjb]]
* [[libofa]]
* [[Secret Rabbit Code | libsamplerate]]
* [[libvisual]]
* [[libvisual-plugins]]
* [[libquicktime]]
* [[libshout]]
* [[libsndfile]]
* [[live555]]
* [[MedCon]]
* [[MPD]]
* [[MPEG4IP]]
* [[Musepack]]
* [[NAS]]
* [[opal]]
* [[OpenAL]]
* [[PortAudio]]
* [[PulseAudio]]
* [[pwlib]]
* [[SDL]]
* [[GUIlib]]
* [[SDL_gfx]]
* [[SDL_image]]
* [[SDL_net]]
* [[SDL_mixer]]
* [[SDL_sound]]
* [[SDL_ttf]]
* [[Secret Rabbit Code]]
* [[SMPEG]]
* [[Speex]]
* [[Swfdec]]
* [[TagLib]]
* [[Theora]]
* [[TunePimp]]
* [[TwoLAME]]
* [[vec2web]]
* [[x264]]
* [[Xine Libraries]]
* [[XviD]]
* [[xvid4conf]]

== Media Utilities ==
* [[Amarok]]
* [[Asunder]]
* [[Audacious]]
* [[audacious-plugins]]
* [[Avifile]]
* [[Banshee]]
* [[Bonk]]
* [[CDParanoia-III]]
* [[FFmpeg]]
* [[gimmix]]
* [[Gnomad2]]
* [[Grip]]
* [[gxine]]
* [[gnash]]
* [[iTouch-Control]]
* [[Kaffeine]]
* [[LAME]]
* [[LiVES]]
* [[MJPEG Tools]]
* [[Mpg123]]
* [[MPlayer]]
* [[MPlayerplug-in]]
* [[Normalize]]
* [[Ogle]]
* [[RipperX]]
* [[Seom]]
* [[shntool]]
* [[soundkonverter]]
* [[SoX]]
* [[Tagtool]]
* [[Timidity]]
* [[Transcode]]
* [[vcdimager]]
* [[vlc]]
* [[Vorbis Tools]]
* [[XMMS]]

== TV tuner/Radio playing and recording ==
* [[ivtv]]
* [[lirc]]
* [[MythTV]]

== Graphics Editing/Viewing ==
* [[Ghostview]]
* [[GIMP]]
* [[Gimp-Print]]
* [[Gqview]]
* [[GraphicsMagick]]
* [[ImageMagick]]
* [[Inkscape]]
* [[KSquirrel]]
* [[POV-Ray]]
* [[sodipodi]]

== Printing ==
* [[CUPS]]
* [[Ghostscript]]
* [[Foomatic]]
* [[libpaper]]
* [[LPRng]]
* [[IJS]]
* [[hplip]]

== [[:Category:PostScript|PostScript]] ==
<dpl>category=PostScript</dpl>

== [[:Category:Scanning|Scanning]] ==
<dpl>category=Scanning</dpl>

== [[:Category:Cameras|Cameras]] ==
<dpl>category=Cameras</dpl>

== CD/DVD-Writing Utilities ==
* [[Cdrtools]]
* [[Cdrdao]]
* [[Cdrkit]]
* [[Daa2iso]]
* [[DVDAuthor]]
* [[DVDAuthorWizard]]
* [[dvd+rw-tools]]
* [[dvd-slideshow]]
* [[Graveman!]]
* [[K3b]]
* [[kmediafactory]]
* [[Uif2iso]]
* [[XcdRoast]]

== [[:Category:Emulators|Emulators]] ==
<dpl>category=Emulators</dpl>

== DocBook ==
* [[DocBook SGML]]
* [[DocBook XML]]

== Type Setting ==
* [[teTeX]]
* [[JadeTeX]]

== Games ==
* [[AstroMenace|AstroMenace (Closed-Source)]]
* [[FlightGear]]
* [[Freeciv]]
* [[Ggz client libs]]
* [[libggz]]
* [[Lincity-ng]]
* [[SimGear]]
* [[TORCS]]

== [[:Category:Science_Engineering|Science/Engineering/Mathematics]] ==
<dpl>category=Science_Engineering</dpl>

== [[:Category:Clusters_Grids|Clusters, Grids, and Parallel Programming]] ==
<dpl>category=Clusters_Grids</dpl>

== [[:Category:Financial|Financial Libraries and Utilities]] ==
<dpl>category=Financial</dpl>

== [[:Category:Office_Suites|Office Suites and Productivity]] ==
<dpl>category=Office_Suites</dpl>

== Drivers ==
=== Input ===
* [[Synaptics]]
* [[Wacom|Wacom graphic tablet drivers]]

=== Video ===
* [[NVIDIA|NVIDIA Graphics Driver]]

=== Printers ===
* [[hplip]] (HJP drivers for inkjet, laser and More!)
* [[Samsung]] (ML series and some xeon lasers)

== Closed-Source Applications and Plugins ==
* [[Adobe Reader]]
* [[Flash Player]]
* [[Lightscribe]]
* [[Opera]]
* [[RealPlayer]]

== Benchmarking Utilities ==
* [[bootchart]]
* [[libcoyotl]]
* [[libevocosm]]
* [[libacovea]]

== [[:Category:Package Management|Package Management]] ==
<dpl>category=Package Management</dpl>

Main Page

2008-10-20T02:27:10Z

Bigdissaved: /* Network Drivers */

Welcome to Community Driven BLFS.

== NOTICE ==

'''Please don't add information from BLFS without acknowledging the source. BLFS is copyrighted but copying is allowed with attribution.'''

When adding packages please add a CONTENT section so everyone knows what the package does. Thank you. You can find a script [[User:Weibullguy|here]] that can be used to make this task reasonably pain free. The script even formats the output so a simple copy and paste is all you need to do (in most cases).

If you have problems building any packages in CBLFS and are unable to find the solution yourself, please do not use the "Talk" section associated with the package. You will receive no help, but your entry will be deleted. Most of the CLFS and CBLFS developers and users hang out at chat.freenode.net in the #cross-lfs channel. Your odds of receiving help dramatically improve if you stop by #cross-lfs or post on the mailing list.

== What is Community Driven BLFS ==

Community Driven BLFS (CBLFS) is an open project that takes over after you have completed a Cross-LFS based build. While there's a veritable [[Who's Who]] of CBLFS, as the name implies anyone in the community may contribute. Your contributions are welcome; from multilib build instructions for Open Office to spelling and grammar corrections. You can find a list of packages that are referenced but still need build instructions in the [http://cblfs.cross-lfs.org/index.php/Special:Wantedpages Wanted Pages] if you don't have anything particular in mind.

There are only three requirements and one strong suggestion for contributing to CBLFS. First, read and heed the applicable portions of the '''NOTICE''' section above. Second, please follow the page format that is set. There is a link to the page template below. Explanatory comments are in bold green text and should, obviously, be removed. Always check the template as changes ''are'' made periodically.

Third, upload patches in accordance with the instructions below. These instructions will help you create and format the file before uploading. Please don't provide links to patches or other files stored on your personal server.

Finally, there are many good open-source spell checking applications. In fact, there are build instructions for [[Aspell]] in this wiki. Please install and use a spell checker when contributing.

* [[Page_Template|Page Template]]
* [[How to upload patches]]
* [[License]]

In addition to this Wiki, you may also be interested in visting the [http://hints.cross-lfs.org/index.php/Main_Page CLFS-Hints Wiki].

== Post CLFS Configuration ==
* [[Bash Startup Files]]
* [[System User and Groups]]
* [[Configuring for Adding Users]]
* [[Creating an Initramfs]]

= Packages in the Wiki =

== [[:Category:Security|Security]] ==
<dpl>category=Security</dpl>

== [[:Category:Block Device|Block Device]] ==
<dpl>category=Block Device</dpl>

== [[:Category:File System|File System]] ==
<dpl>category=File System</dpl>

== [[:Category:Hardware Monitoring|Hardware Monitoring]] ==
<dpl>category=Hardware Monitoring</dpl>

== [[:Category:Text Editors|Text Editors]] ==
<dpl>category=Text Editors</dpl>

== General Libraries ==
* [[Acl]]
* [[Aspell]]
* [[Hspell]]
* [[Attr]]
* [[c-ares]]
* [[CHMlib]]
* [[CLucene]]
* [[cpufrequtils]]
* [[Dante]]
* [[DBH]]
* [[Dynamite]]
* [[Eventlog]]
* [[Exempi]]
* [[Expat]]
* [[Gamin]]
* [[GDBM]]
* [[Glib1]]
* [[Glib2]]
* [[Glibmm]]
* [[GMime]]
* [[GnuTLS]]
* [[GOB2]]
* [[GtkUnique]]
* [[gwenhywfar]]
* [[libarchive]]
* [[libassuan]]
* [[libavc1394]]
* [[libcap]]
* [[Libcfg]]
* [[libchipcard]]
* [[libcroco]]
* [[libdbi]]
* [[libdbi-drivers]]
* [[libdc1394]]
* [[libebml]]
* [[libevent]]
* [[libextractor]]
* [[libgalago]]
* [[LibGCrypt]]
* [[Libggz]]
* [[LibGPG-Error]]
* [[Libgpod]]
* [[libiec61883]]
* [[libieee1284]]
* [[libipoddevice]]
* [[libksba]]
* [[libdaemon]]
* [[libgssapi]]
* [[libgssglue]]
* [[libgsf]]
* [[libgtkhtml]]
* [[libidn]]
* [[libical]]
* [[LibIDL]]
* [[libmal]]
* [[libmspack]]
* [[libnfsidmap]]
* [[liboil]]
* [[libpqxx]]
* [[libptp2]]
* [[libraw1394]]
* [[librpcsecgss]]
* [[Libsigc++]]
* [[libssh2]]
* [[libstroke]]
* [[libsynce]]
* [[LibtASN1]]
* [[libusb]]
* [[libwpd]]
* [[libxml++]]
* [[LibXML2]]
* [[LibXSLT]]
* [[LZO]]
* [[LZO2]]
* [[Meanwhile]]
* [[MIT krb5]] | [[Heimdal]]
* [[OpenCDK]]
* [[Ortp]]
* [[Pcre]]
* [[Popt]]
* [[PhysicsFS]]
* [[S-Lang]]
* [[SQLite]]
* [[SQLite3]]
* [[t1lib]]
* [[TCL]]
* [[TCP Wrappers]]
* [[Unshield]]
* [[Wv]]
* [[Wv2]]
* [[Xerces-C++]]
* [[Xalan-C++]]

== Graphics and Font Libraries ==
* [[AAlib]]
* [[Dcraw]]
* [[Exiv2]]
* [[FLTK]]
* [[FreeGLUT]]
* [[FreeType]]
* [[FriBidi]]
* [[FontConfig]]
* [[GD]]
* [[GifLib]]
* [[glitz]]
* [[GtkSpell]]
* [[IlmBase]]
* [[Imlib]]
* [[Imlib2]]
* [[JasPer]]
* [[JBIG-Kit]]
* [[kipi-plugins]]
* [[KSquirrel-libs]]
* [[libart_lgpl]]
* [[libexif]]
* [[libexif-gtk]]
* [[libjpeg]]
* [[libkdcraw]]
* [[libkexif]]
* [[libkexiv2]]
* [[libkipi]]
* [[libwmf]]
* [[libmng]]
* [[libpng]]
* [[librsvg]]
* [[LibTIFF]]
* [[little cms]]
* [[Netpbm]]
* [[OpenEXR]]
* [[PLIB]]
* [[Tk]]
* [[UFRaw]]
* [[VTK]]

== General Utilities ==
* [[Acpid]]
* [[afio]]
* [[bash-completion]]
* [[bash-completion-config]]
* [[Bc]]
* [[boost]]
* [[cabextract]]
* [[ConsoleKit]]
* [[Console-tools]]
* [[cpio]]
* [[D-BUS]]
* [[Desktop-file-utils]]
* [[Dialog]]
* [[eject]]
* [[emelFM2]]
* [[Fcron]]
* [[FontForge]]
* [[FUSE]]
* [[gcolor2]]
* [[gnokii]]
* [[GNU Pth]]
* [[GParted]]
* [[GPM]]
* [[Gtk-Doc]]
* [[HAL]]
* [[hal-info]]
* [[hdparm]]
* [[Hyperestraier]]
* [[hwinfo]]
* [[initng]]
* [[initng-conf-gtk]]
* [[Intltool]]
* [[iso-codes]]
* [[logrotate]]
* [[Lomoco]]
* [[mc]]
* [[Orange]]
* [[Parted]]
* [[PCI Utilities]]
* [[Pilot-Link]]
* [[pinentry]]
* [[pkg-config]]
* [[pmount]]
* [[PodSleuth]]
* [[PolicyKit]]
* [[QDBM]]
* [[rkhunter]]
* [[rpm2cpio]]
* [[rpm2targz]]
* [[Screen]]
* [[ScrollKeeper]]
* [[sdparm]]
* [[sg3_utils]]
* [[Sharutils]]
* [[Star]]
* [[Strigi]]
* [[Syslog-ng]]
* [[Sysfsutils]]
* [[Tidy]]
* [[unifdef]]
* [[UnixODBC]]
* [[unrar]]
* [[Unzip]]
* [[usbutils]]
* [[Vixie-Cron]]
* [[Wget]]
* [[Which]]
* [[xdelta]]
* [[xmlto]]
* [[Zip]]

== Programming ==
* [[ACPICA]]
* [[Apache Ant]]
* [[APR]]
* [[APR-util]]
* [[Autogen]]
* [[BJam]]
* [[ccache]]
* [[Check]]
* [[Chicken]]
* [[CMake]]
* [[CppUnit]]
* [[ctags]]
* [[DDD]]
* [[DejaGnu]]
* [[Dev86]]
* [[DevHelp]]
* [[Distcc]]
* [[Doxygen]]
* [[Expect]]
* [[gc]]
* [[GCC]]
* [[GCC-3.3]] (libstdc++.so.5)
* [[GCL]]
* [[GDB]]
* [[GDL]]
* [[Geany]]
* [[Kommander]]
* [[libfc]]
* [[libgda]]
* [[libglade]]
* [[libglademm]]
* [[Gengetopt]]
* [[Glade2]]
* [[Glade3]]
* [[GMP]]
* [[Gperf]]
* [[Graphviz]]
* [[Guile]]
* [[Guile-GTK]]
* [[iiview]]
* [[Jam]]
* [[JDK]]
* [[Log4cxx]]
* [[Lua]]
* [[MPFR]]
* [[NASM]]
* [[Objective Caml]]
* [[OpenJDK]]
* [[Perl Modules]]
* [[PHP]]
* [[Python]]
* [[Python Modules]]
* [[RLog]]
* [[Ruby]]
* [[SWIG]]
* [[smake]]
* [[Strace]]
* [[Valgrind]]
* [[XPontus]]
* [[Yasm]]

== C# ==
* [[Evolution-Sharp]]
* [[Galago-Sharp]]
* [[Gnome-Sharp]]
* [[Gsf-Sharp]]
* [[Gtk-Sharp]]
* [[libgdiplus]]
* [[Mono]]
* [[Mono-Addins]]
* [[Monodoc]]

== [[:Category:Source Code Management|Source Code Management]] ==
<dpl>category=Source Code Management</dpl>

== Networking ==
* [[aria2]]
* [[arno-iptables-firewall]]
* [[Avahi]]
* [[BIND]]
* [[BIND Utilities]]
* [[bluez]]
* [[bluez-libs]]
* [[bluez-utils]]
* [[Dhcpcd]]
* [[Curl]]
* [[curlftpfs]]
* [[FreeNX]]
* [[ifplugd]]
* [[iptables]]
* [[libbtctl]]
* [[libpcap]]
* [[imap c-client]]
* [[mDNSResponder]]
* [[minicom]]
* [[Netplug]]
* [[NetTools]]
* [[OpenOBEX]]
* [[OpenSLP]]
* [[PPP]]
* [[SSHFS]]
* [[SWAT]]
* [[Wireless tools]]
* [[WPA Supplicant]]
* [[Xinetd]]

== Network Drivers ==
* [[MadWifi]]
* [[NdisWrapper]]
* [[BroadCom]] (BCM4311 BCM4312 BCM4321 BCM4322

== Networking Libraries ==
* [[libdownload]]
* [[libnl]]
* [[librsync]]
* [[libsoup]]
* [[neon]]

== Network Applications ==
* [[bridge-utils]]
* [[Dhcdbd]]
* [[dvb-apps]]
* [[netcat]]
* [[net-Snmp]]
* [[netstat]]
* [[NetworkManager]]
* [[Nmap]]
* [[NTP]]
* [[OpenVPN]]
* [[Portmap]]
* [[qca2]]
* [[rdesktop]]
* [[RRDTool]]
* [[socat]]
* [[TCPDump]]
* [[Traceroute]]
* [[TSClient]]
* [[Whois]]
* [[Wireshark]]

== Web Browser/Mail/News/Chat/P2P/FTP Clients ==
* [[Ekiga]]
* [[Fetchmail]]
* [[gFTP]]
* [[irssi]]
* [[Kermit]]
* [[Links]]
* [[Lynx]]
* [[microdc2]]
* [[Mutt]]
* [[Postfix]]
* [[Procmail]]
* [[Sim]]
* [[sSMTP]]
* [[Trix]]
* [[weechat]]

== Servers ==
* [[Apache]]
* [[Berkeley DB]]
* [[Courier-Authlib]]
* [[Courier-IMAP]]
* [[Dhcp]]
* [[Exim]]
* [[MySQL]]
* [[nginx]]
* [[NFS Utilities]]
* [[OpenLDAP]]
* [[OpenSSH]]
* [[PostgreSQL]]
* [[ProFTPD]]
* [[Qmail]]
* [[Rarpd]]
* [[Rsnapshot]]
* [[Rsync]]
* [[Samba]]
* [[Sendmail]]
* [[Squid]]
* [[Squirrelmail]]
* [[tftp-hpa]]
* [[Vsftpd]]

== [[:Category:Shells|Shells]] ==
<dpl>category=Shells</dpl>

== [[:Category:Power Management|Power Management]] ==
<dpl>category=Power Management</dpl>

== X ([[X Window System]]) ==
* [[Xorg6]]
* [[Xorg7/Intro|Xorg7]]

== X Libraries ==
* [[ATK]]
* [[Beagle]]
* [[Cairo]]
* [[Cairomm]]
* [[DjVuLibre]]
* [[goffice]]
* [[Gtk1]]
* [[Gtk2]]
* [[Gtk+-Extras]]
* [[Gtkmm]]
* [[Gtk-Qt-Engine]]
* [[Gtk-vnc]]
* [[hicolor-icon-theme]]
* [[icon-naming-utils]]
* [[LessTif]]
* [[libcm]]
* [[libnotify]]
* [[libsexy]]
* [[libwnck]]
* [[libxklavier]]
* [[notification-daemon]]
* [[Pango]]
* [[Poppler]]
* [[Qt3]]
* [[Qt4]]
* [[Shared-MIME-Info]]
* [[startup-notification]]
* [[Tapioca-qt]]
* [[Telepathy-qt]]
* [[Tracker]]
* [[wxWidgets]]
* [[Xaw3d]]
* [[XCB]]

== Desktops/Window Managers ==
* [[AfterStep]]
* [[Blackbox]]
* [[Compiz Fusion]]
* [[dr17]]
* [[Fluxbox]]
* [[Fvwm]]
* [[Gnome]]
* [[Icewm]]
* [[iDesk]]
* [[KDE]]
* [[KDE4]]
* [[Metacity]]
* [[ratpoison]]
* [[vtwm]]
* [[Xfce]]
* [[Lxde]]

== X Window Applications ==
* [[3DDesktop]]
* [[aDesklets]]
* [[Avant Window Navigator]]
* [[Beryl]]
* [[Conky]]
* [[Gkrellm]]
* [[Krusader]]
* [[KXDocker]]
* [[Pdfedit]]
* [[QuickSynergy]]
* [[Slim]]
* [[Synergy2]]
* [[XDaliClock]]
* [[Xpdf]]
* [[XScreenSaver]]
* [[Yakuake]]

== X Web Browser/Mail/News/Chat/P2P Clients ==
* [[aMule]]
* [[Evolution]]
* [[Firefox]]
* [[Gtk-Gnutella]]
* [[Ktorrent]]
* [[Ktorrent-KDE4]]
* [[Linuxdcpp]]
* [[Mldonkey]]
* [[Mozilla]]
* [[Pidgin]]
* [[Rtorrent]]
* [[SeaMonkey]]
* [[Sylpheed]]
* [[Thunderbird]]
* [[Xchat]]

== Media and Libraries ==
* [[ALSA]]
* [[ALUT]]
* [[Audio File]]
* [[DivX4Linux]]
* [[EsounD]]
* [[eSpeak]]
* [[FAAC]]
* [[FAAD2]]
* [[FLAC]]
* [[Gpac]]
* [[GStreamer]]
* [[Id3lib]]
* [[libburn]]
* [[Liba52]]
* [[Libao]]
* [[libcaca]]
* [[libcddb]]
* [[libcdio]]
* [[Libdv]]
* [[libdvbpsi]]
* [[libdvdcss]]
* [[libdvdnav]]
* [[Libdvdread]]
* [[libFAME]]
* [[libid3]]
* [[libid3tag]]
* [[libisofs]]
* [[libogg]]
* [[libopendaap]]
* [[libvorbis]]
* [[libmad]]
* [[libmatroska]]
* [[libmikmod]]
* [[libmodplug]]
* [[libmpd]]
* [[libmpeg2]]
* [[LibMPEG3]]
* [[libmtp]]
* [[libMusicBrainz]]
* [[libnjb]]
* [[libofa]]
* [[Secret Rabbit Code | libsamplerate]]
* [[libvisual]]
* [[libvisual-plugins]]
* [[libquicktime]]
* [[libshout]]
* [[libsndfile]]
* [[live555]]
* [[MedCon]]
* [[MPD]]
* [[MPEG4IP]]
* [[Musepack]]
* [[NAS]]
* [[opal]]
* [[OpenAL]]
* [[PortAudio]]
* [[PulseAudio]]
* [[pwlib]]
* [[SDL]]
* [[GUIlib]]
* [[SDL_gfx]]
* [[SDL_image]]
* [[SDL_net]]
* [[SDL_mixer]]
* [[SDL_sound]]
* [[SDL_ttf]]
* [[Secret Rabbit Code]]
* [[SMPEG]]
* [[Speex]]
* [[Swfdec]]
* [[TagLib]]
* [[Theora]]
* [[TunePimp]]
* [[TwoLAME]]
* [[vec2web]]
* [[x264]]
* [[Xine Libraries]]
* [[XviD]]
* [[xvid4conf]]

== Media Utilities ==
* [[Amarok]]
* [[Asunder]]
* [[Audacious]]
* [[audacious-plugins]]
* [[Avifile]]
* [[Banshee]]
* [[Bonk]]
* [[CDParanoia-III]]
* [[FFmpeg]]
* [[gimmix]]
* [[Gnomad2]]
* [[Grip]]
* [[gxine]]
* [[gnash]]
* [[iTouch-Control]]
* [[Kaffeine]]
* [[LAME]]
* [[LiVES]]
* [[MJPEG Tools]]
* [[Mpg123]]
* [[MPlayer]]
* [[MPlayerplug-in]]
* [[Normalize]]
* [[Ogle]]
* [[RipperX]]
* [[Seom]]
* [[shntool]]
* [[soundkonverter]]
* [[SoX]]
* [[Tagtool]]
* [[Timidity]]
* [[Transcode]]
* [[vcdimager]]
* [[vlc]]
* [[Vorbis Tools]]
* [[XMMS]]

== TV tuner/Radio playing and recording ==
* [[ivtv]]
* [[lirc]]
* [[MythTV]]

== Graphics Editing/Viewing ==
* [[Ghostview]]
* [[GIMP]]
* [[Gimp-Print]]
* [[Gqview]]
* [[GraphicsMagick]]
* [[ImageMagick]]
* [[Inkscape]]
* [[KSquirrel]]
* [[POV-Ray]]
* [[sodipodi]]

== Printing ==
* [[CUPS]]
* [[Ghostscript]]
* [[Foomatic]]
* [[libpaper]]
* [[LPRng]]
* [[IJS]]
* [[hplip]]

== [[:Category:PostScript|PostScript]] ==
<dpl>category=PostScript</dpl>

== [[:Category:Scanning|Scanning]] ==
<dpl>category=Scanning</dpl>

== [[:Category:Cameras|Cameras]] ==
<dpl>category=Cameras</dpl>

== CD/DVD-Writing Utilities ==
* [[Cdrtools]]
* [[Cdrdao]]
* [[Cdrkit]]
* [[Daa2iso]]
* [[DVDAuthor]]
* [[DVDAuthorWizard]]
* [[dvd+rw-tools]]
* [[dvd-slideshow]]
* [[Graveman!]]
* [[K3b]]
* [[kmediafactory]]
* [[Uif2iso]]
* [[XcdRoast]]

== [[:Category:Emulators|Emulators]] ==
<dpl>category=Emulators</dpl>

== DocBook ==
* [[DocBook SGML]]
* [[DocBook XML]]

== Type Setting ==
* [[teTeX]]
* [[JadeTeX]]

== Games ==
* [[AstroMenace|AstroMenace (Closed-Source)]]
* [[FlightGear]]
* [[Freeciv]]
* [[Ggz client libs]]
* [[libggz]]
* [[Lincity-ng]]
* [[SimGear]]
* [[TORCS]]

== [[:Category:Science_Engineering|Science/Engineering/Mathematics]] ==
<dpl>category=Science_Engineering</dpl>

== [[:Category:Clusters_Grids|Clusters, Grids, and Parallel Programming]] ==
<dpl>category=Clusters_Grids</dpl>

== [[:Category:Financial|Financial Libraries and Utilities]] ==
<dpl>category=Financial</dpl>

== [[:Category:Office_Suites|Office Suites and Productivity]] ==
<dpl>category=Office_Suites</dpl>

== Drivers ==
=== Input ===
* [[Synaptics]]
* [[Wacom|Wacom graphic tablet drivers]]

=== Video ===
* [[NVIDIA|NVIDIA Graphics Driver]]

=== Printers ===
* [[hplip]] (HJP drivers for inkjet, laser and More!)
* [[Samsung]] (ML series and some xeon lasers)

== Closed-Source Applications and Plugins ==
* [[Adobe Reader]]
* [[Flash Player]]
* [[Lightscribe]]
* [[Opera]]
* [[RealPlayer]]

== Benchmarking Utilities ==
* [[bootchart]]
* [[libcoyotl]]
* [[libevocosm]]
* [[libacovea]]

== [[:Category:Package Management|Package Management]] ==
<dpl>category=Package Management</dpl>

TCP Wrappers

2008-10-19T22:07:45Z

Bigdissaved: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://ftp.coe.psu.ac.th/debian-ipv6/pool/ipv6/tcp-wrappers/tcp-wrappers_{{TCP_Wrappers-Version}}.orig.tar.gz
|-valign="top"
!Download Patch:
| http://ftp.coe.psu.ac.th/debian-ipv6/pool/ipv6/tcp-wrappers/tcp-wrappers_{{TCP_Wrappers-Version}}-3.diff.gz
|-
|}

----

{{Package-Introduction|TCP Wrapper is a host-based network ACL system, used to filter network access to Internet protocol services run on Unix-like operating systems.|ftp://ftp.porcupine.org/pub/security/index.html. Updated to support ipv6 through debian port.}}

== Configuration Information ==

{{Note|TCP Wrapper does use DESTDIR. However, it fails to create the necessary directories for it and so make install fails when using DESTDIR. You need to create the necessary directories prior to installation.}}

install -dv <DESTDIR>/lib (or lib{32} or lib{64})
install -dv <DESTDIR>/usr/include
install -dv <DESTDIR>/usr/lib (or lib{32} or lib{64})
install -dv <DESTDIR>/usr/sbin
install -dv <DESTDIR>/usr/share/man/man{3,5,8}

== Non-Multilib ==

Configure and compile the package:

gzip -dc ../tcp_wrappers-{{TCP_Wrappers-Version}}-3.patch.gz | patch -Np1 &&
sed -i "s,^extern char \*malloc();,/* & */," scaffold.c &&
make REAL_DAEMON_DIR=/usr/sbin STYLE=-DPROCESS_OPTIONS linux

Install the package:

make install

== Multilib ==

=== 32Bit ===

Configure and compile the package:

gzip -dc ../tcp_wrappers-{{TCP_Wrappers-Version}}.patch.gz | patch -Np1 &&
sed -i "s,^extern char \*malloc();,/* & */," scaffold.c &&
make CC="gcc ${BUILD32}" REAL_DAEMON_DIR=/usr/sbin STYLE=-DPROCESS_OPTIONS linux

Install the package:

make install

=== N32 ===

Configure and compile the package:

gzip -dc ../tcp_wrappers-{{TCP_Wrappers-Version}}.patch.gz | patch -Np1 &&
sed -i "s,^extern char \*malloc();,/* & */," scaffold.c &&
sed -i -e "s@/lib/@/lib32/@g" Makefile &&
make CC="gcc ${BUILDN32}" REAL_DAEMON_DIR=/usr/sbin STYLE=-DPROCESS_OPTIONS linux

Install the package:

make install

=== 64Bit ===

Configure and compile the package:

gzip -dc ../tcp_wrappers-{{TCP_Wrappers-Version}}.patch.gz | patch -Np1 &&
sed -i "s,^extern char \*malloc();,/* & */," scaffold.c &&
sed -i -e "s@/lib/@/lib64/@g" Makefile &&
make CC="gcc ${BUILD64}" REAL_DAEMON_DIR=/usr/sbin STYLE=-DPROCESS_OPTIONS linux

Install the package:

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| tcpd, tcpdchk, tcpdmatch, try-from, and safe_finger
|-valign="top"
! Installed Libraries:
| libwrap.{so,a}
|-valign="top"
! Installed Directories:
| None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! tcpd
| is the main access control daemon for all Internet services, which '''inetd''' or '''xinetd''' will run instead of running the requested service daemon.
|-valign="top"
! tcpdchk
| is a tool to examine a '''tcpd''' wrapper configuration and report problems with it.
|-valign="top"
! tcpdmatch
| is used to predict how the TCP wrapper would handle a specific request for a service.
|-valign="top"
! try-from
| can be called via a remote shell command to find out if the host name and address are properly recognized.
|-valign="top"
! safe_finger
| is a wrapper for the '''finger''' utility, to provide automatic reverse name lookups.
|-valign="top"
! libwrap.{so,a}
| contains the API functions required by the TCP Wrapper programs as well as other programs to become “TCP Wrapper-aware”.
|}

Libxcb

2008-07-26T23:05:39Z

Bigdissaved: Add libpthread-stubs to dep list..

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://xcb.freedesktop.org/dist/libxcb-{{Libxcb-Version}}.tar.bz2
|-valign="top"
!Download Patch: (update/test patch for new ver)
| http://svn.cross-lfs.org/svn/repos/patches/libxcb/libxcb-{{Libxcb-Version}}-sloppy_lock-1.patch
|}

----

== Dependencies ==

=== Required ===
* [[xcb-proto]]
* [[LibXSLT]]
* libXau from [[Xorg7/Libraries]]
* libpthread-stubs from [[Xorg7/Libraries]]
=== Optional ===
* libXdmcp from [[Xorg7/Libraries]]
* [[doxygen]]

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../libxcb-{{Libxcb-Version}}-sloppy_lock-1.patch &&
./configure $XORG_CONFIG &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

patch -Np1 -i ../libxcb-{{Libxcb-Version}}-sloppy_lock-1.patch &&
CC="gcc ${BUILD32}" PKG_CONFIG_PATH=${PKG_CONFIG_PATH32} \
./configure $XORG_CONFIG32 &&
make

Install the package

make install

=== N32 ===

Compile the package:

patch -Np1 -i ../libxcb-{{Libxcb-Version}}-sloppy_lock-1.patch &&
CC="gcc ${BUILDN32}" PKG_CONFIG_PATH=${PKG_CONFIG_PATHN32} \
./configure $XORG_CONFIGN32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

patch -Np1 -i ../libxcb-{{Libxcb-Version}}-sloppy_lock-1.patch &&
CC="gcc ${BUILD64}" PKG_CONFIG_PATH=${PKG_CONFIG_PATH64} \
./configure $XORG_CONFIG64 &&
make

Install the package

make install

== Configuring ==

The patch applied above to libxcb adds an environment variable, LIBXCB_ALLOW_SLOPPY_LOCK, to be set which will allow the locking bugs to not crash the application. It is a workaround that is known to be needed in a few cases. If it is found that these bugs affect an application in use, add the following to your system or personal profile[http://www.linuxfromscratch.org/blfs/view/svn/x/libxcb.html]:

export LIBXCB_ALLOW_SLOPPY_LOCK=1

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| None
|-valign="top"
! Installed Libraries:
| libxcb.{a,la,so}, libxcb-xlib.{a,la,so}, libxcb-composite.{a,la,so}, libxcb-damage.{a,la,so}, libxcb-dpms.{a,la,so}, libxcb-glx.{a,la,so}, libxcb-randr.{a,la,so}, libxcb-record.{a,la,so}, libxcb-render.{a,la,so}, libxcb-res.{a,la,so}, libxcb-screensaver.{a,la,so}, libxcb-shape.{a,la,so}, libxcb-shm.{a,la,so}, libxcb-sync.{a,la,so}, libxcb-xevie.{a,la,so}, libxcb-xf86dri.{a,la,so}, libxcb-xfixes.{a,la,so}, libxcb-xinerama.{a,la,so}, libxcb-xprint.{a,la,so}, libxcb-xtest.{a,la,so}, libxcb-xv.{a,la,so}, libxcb-xvmc.{a,la,so}
|-valign="top"
! Installed Directory:
| /{XORG_PREFIX}/include/xcb, /{XORG_PREFIX}/share/doc/libxcb
|}

Sudo

2008-07-06T04:51:30Z

Bigdissaved: Added configing to page (visudo)

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.sudo.ws/sudo/dist/sudo-{{Sudo-Version}}.tar.gz
|}

----

{{Package-Introduction|Sudo (su "do") allows a system administrator to delegate authority to give certain users (or groups of users) the ability to run some (or all) commands as root or another user while providing an audit trail of the commands and their arguments.|http://www.sudo.ws/}}

== Dependencies ==

===Recomended===
[[Linux-PAM]]

===Optional===
[[Selinux]]

== Configuration Information ==

{|style="text-align: left"
|--without-pam builds with out pam support.
|}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --libexecdir=/usr/lib \
--enable-noargs-shell --with-ignore-dot --with-all-insults \
--enable-shell-sets-home &&
make

Install the package

make install &&
if [ -f /etc/pam.d/su ]; then
sed "s/su$/&do/" /etc/pam.d/su > /etc/pam.d/sudo
fi

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr --libexecdir=/usr/lib \
--enable-noargs-shell --with-ignore-dot --with-all-insults \
--enable-shell-sets-home &&
make

Install the package

make install &&
if [ -f /etc/pam.d/su ]; then
sed "s/su$/&do/" /etc/pam.d/su > /etc/pam.d/sudo
fi

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 --libexecdir=/usr/lib \
--enable-noargs-shell --with-ignore-dot --with-all-insults \
--enable-shell-sets-home &&
make

Install the package

make install &&
if [ -f /etc/pam.d/su ]; then
sed "s/su$/&do/" /etc/pam.d/su > /etc/pam.d/sudo
fi

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 --libexecdir=/usr/lib \
--enable-noargs-shell --with-ignore-dot --with-all-insults \
--enable-shell-sets-home &&
make

Install the package

make install &&
if [ -f /etc/pam.d/su ]; then
sed "s/su$/&do/" /etc/pam.d/su > /etc/pam.d/sudo
fi

== Configuring ==

To edit the protected sudoers config file, use "visudo"

To allow a user full root rights with out a passward, add the following to the file.

${username} ALL=(ALL) NOPASSWD:ALL

For more options, read the config file, and the man pages.....

== Content ==

{| style="text-align: left;"
|-
! Installed Programs:
| sudo, sudoedit, and visudo
|-
! Installed Libraries:
| sudo_noexec.so
|-
! Installed Directories:
| None
|}

=== Short Descriptions ===
{| style="text-align: left;"
|-
! sudo
|executes a command as another user as permitted by the /etc/sudoers configuration file.
|-
! sudoedit
| is a hard link to sudo that implies the -e option to invoke an editor as another user.
|-
! visudo
|allows for safer editing of the sudoers file.
|-valign="top"
!sudo_noexec.so
| enables support for the "noexec" functionality which prevents a dynamically-linked program being run by sudo from executing another program (think shell escapes).
|}

[[Category:Security]]

Template:MCS-Version

2008-06-01T22:24:52Z

Bigdissaved:

0.7.1

MCS

2008-06-01T22:23:51Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://distfiles.atheme.org/libmcs-{{MCS-Version}}.tgz
|}

----

{{Package-Introduction|mcs is a library and set of userland tools which abstract the storage of configuration settings away from userland applications.

It is hoped that by using mcs and adding mcs support to various applications, that the application will fit in better with it's desktop environment.

There have been other projects like this before (such as GConf), but unlike those projects, mcs strictly handles abstraction. It does not impose any specific data storage requirement, nor is it tied to any desktop environment or software suite.

Because mcs is licensed under the three-clause BSD license, it is hoped that most applications will adopt it. |http://www.atheme.org/projects/mcs.shtml}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" GXX="g++ ${BUILD32}" PKG_CONFIG_PATH=$PKG_CONFIG_PATH32 \
./configure --prefix=/usr &&
make

Install the package

make install
=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" GXX="g++ ${BUILDN32}" PKG_CONFIG_PATH=$PKG_CONFIG_PATHN32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" GXX="g++ ${BUILD64}" PKG_CONFIG_PATH=$PKG_CONFIG_PATH64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&

Template:MCS-Version

2008-06-01T22:23:04Z

Bigdissaved:

0.4.1

Pidgin

2008-06-01T22:02:17Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/pidgin/pidgin-{{Pidgin-Version}}.tar.bz2
|}

----

{{Package-Introduction|Pidgin is an instant messaging client that can connect with a wide range of networks including AIM, ICQ, MSN, Jabber, IRC, Napster, Gadu-Gadu, Zephyr and Yahoo!|http://pidgin.im/pidgin/home/}}

== Dependencies ==

=== Required ===
* [[Gtk2]]
* [[LibXML2]]
* [[Perl_Module_XML::Parser]]
* [[startup-notification]]

=== Optional ===
* [[D-BUS Glib]] and [[Python]]
* [[GConf]]
* [[Gstreamer]]
* [[Avahi]]
* [[silc-toolkit]]
* [[Audio File]]
* [[libao]]
* [[Mono]]
* [[TCL]]
* [[Tk]]
* [[GtkSpell]]
* [[Evolution Data Server]] and [[LibXML2]]
* [[XScreenSaver]]
* [[GnuTLS]] or [[NSS]] ( NSS required for MSN)
* [[Zephyr]]
* [[Doxygen]]

== Non-Multilib ==

Compile the package:

sed -i "s/lib64/lib/g" configure &&
CPPFLAGS="-I${XORG_PREFIX}/include" \
./configure --prefix=/usr --sysconfdir=/etc/gnome &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
sed -i "s/lib64/lib/g" configure &&
CPPFLAGS="-I${XORG_PREFIX}/include" \
CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr --sysconfdir=/etc/gnome &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
sed -i "s/lib64/lib32/g" configure &&
CPPFLAGS="-I${XORG_PREFIX}/include" \
CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 \
--sysconfdir=/etc/gnome &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CPPFLAGS="-I${XORG_PREFIX}/include" \
CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 \
--sysconfdir=/etc/gnome &&
make

Install the package

make install &&
unset USE_ARCH

== Contents ==

Pidgin is an instant messaging client that can connect with a wide range of networks including AIM, ICQ, MSN, Jabber, IRC, Napster, Gadu-Gadu, Zephyr and Yahoo!

Audacious-plugins

2008-06-01T19:43:39Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://distfiles.atheme.org/audacious-plugins-{{Audacious-plugins Version}}.tgz
|}

----

{{Package-Introduction|This a set of various plugins for the [[Audacious]] audio player. [[Audacious]] is useless without these.|http://audacious-media-player.org/}}

== Dependencies ==

=== Required ===
* [[audacious]]

=== Optional ===
* [[TagLib]]
* [[Gtk2]]
* [[libglade]]
* [[GConf]]
* [[GNOME Virtual File System]]
* [[EsounD]]
* [[libnms]]
* [[Lirc]]
* [[libnotify]]
* [[libbinio]]
* [[libvorbis]]
* [[libogg]]
* [[FLAC]]
* [[JACK]]
* [[aRts]]
* [[libsidplay]]
* [[musepack]]
* [[ALSA]]
* [[timidity]]
* [[Glib2]]
* [[curl]]
* [[SDL]]
* [[LibXML2]]
*[[libmad]] (For MP1/2/3 playback)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

Audacious

2008-06-01T19:42:51Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://distfiles.atheme.org/audacious-{{Audacious-Version}}.tgz
|}

----

{{Package-Introduction|Audacious is a fork of the Beep Media Player (BMP is no longer in active development) which in turn was a fork of [[XMMS]]. Unlike [[XMMS]] however, Audacious is based on [[Gtk2]].

Audacious is an audio player that will play MP3 ([[LAME]]), Ogg Vorbis ([[libvorbis]]), [[FLAC]], and various other audio formats. It has various plugins that add additional functionality. And since it uses the same skins as [[XMMS]] and Winamp 2, there are quite a few skins out there to choose from.|http://audacious-media-player.org}}

== Dependencies ==

=== Required ===
*[[TagLib]]
*[[libglade]]
*[[Mowgli]]
*[[MCS]]

=== Optional ===
*[[GConf]]
*[[GNOME Virtual File System]]
*[[LibXML2]]
*[[libvisual]]
*[[SDL]]
*[[libvorbis]]
*[[libogg]]
*[[FLAC]]
*[[ALSA]]
*[[EsounD]]

It is recommended that after installing Audacious you install the [[audacious-plugins]] package.

== Configuration Information ==

If you want to enable gnome support, add the following to the configure line:

--enable-gconf --enable-gnome-vfs

== Non-Multilib ==

Configure and compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Configure and compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Configure and compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Configure and compile the package:
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

Template:Audacious-Version

2008-06-01T19:40:14Z

Bigdissaved:

1.5.1

Audacious

2008-06-01T19:39:58Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://distfiles.atheme.org/audacious-{{Audacious-Version}}.tgz
|}

----

{{Package-Introduction|Audacious is a fork of the Beep Media Player (BMP is no longer in active development) which in turn was a fork of [[XMMS]]. Unlike [[XMMS]] however, Audacious is based on [[Gtk2]].

Audacious is an audio player that will play MP3 ([[LAME]]), Ogg Vorbis ([[libvorbis]]), [[FLAC]], and various other audio formats. It has various plugins that add additional functionality. And since it uses the same skins as [[XMMS]] and Winamp 2, there are quite a few skins out there to choose from.|http://audacious-media-player.org/index.php?title=Main_Page}}

== Dependencies ==

=== Required ===
*[[TagLib]]
*[[libglade]]
*[[Mowgli]]
*[[MCS]]

=== Optional ===
*[[GConf]]
*[[GNOME Virtual File System]]
*[[LibXML2]]
*[[libvisual]]
*[[SDL]]
*[[libvorbis]]
*[[libogg]]
*[[FLAC]]
*[[ALSA]]
*[[EsounD]]

It is recommended that after installing Audacious you install the [[audacious-plugins]] package.

== Configuration Information ==

If you want to enable gnome support, add the following to the configure line:

--enable-gconf --enable-gnome-vfs

== Non-Multilib ==

Configure and compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Configure and compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Configure and compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Configure and compile the package:
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

Template:Audacious-plugins Version

2008-06-01T19:39:06Z

Bigdissaved:

1.5.1

Audacious-plugins

2008-06-01T19:38:53Z

Bigdissaved: changed download url

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://distfiles.atheme.org/audacious-plugins-{{Audacious-plugins Version}}.tgz
|}

----

{{Package-Introduction|This a set of various plugins for the [[Audacious]] audio player. [[Audacious]] is useless without these.|http://audacious-media-player.org/Main_Page}}

== Dependencies ==

=== Required ===
* [[audacious]]

=== Optional ===
* [[TagLib]]
* [[Gtk2]]
* [[libglade]]
* [[GConf]]
* [[GNOME Virtual File System]]
* [[EsounD]]
* [[libnms]]
* [[Lirc]]
* [[libnotify]]
* [[libbinio]]
* [[libvorbis]]
* [[libogg]]
* [[FLAC]]
* [[JACK]]
* [[aRts]]
* [[libsidplay]]
* [[musepack]]
* [[ALSA]]
* [[timidity]]
* [[Glib2]]
* [[curl]]
* [[SDL]]
* [[LibXML2]]
*[[libmad]] (For MP1/2/3 playback)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

KDE4/KdeBase

2008-06-01T15:41:41Z

Bigdissaved: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| {{KDE4-Mirror}}kdebase-{{KDE4-Version}}.tar.bz2
|}

== Dependencies ==

=== Required ===

* [[KDE4/KdePimLibs]]
* [[XScreenSaver]]
* [[HAL]]
* [[Xine Libraries]]

=== Optional ===

* [[XCB]]
* [[Libxklavier]]
* [[Bluez-libs]]
* [[Lm_sensors]]
* [[Capseo]]
* [[Compiz]]
* [[Libusb]]

== Non-Multilib ==

Compile the package:

mkdir -v build &&
cd build &&
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} .. &&
make

If cmake makes a fuss about about needing X11_LIBRARY and XEXT_LIBRARY specified, pass this with the cmake command.
-DX11_LIBRARY=$XORG_PREFIX/lib -DXEXT_LIBRARY=$XORG_PREFIX/lib

Install the package:

make install

== Multilib ==

=== 32Bit ===

mkdir -v build &&
cd build &&
USE_ARCH=32 PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} \
-DSYSCONF_INSTALL_DIR=/etc/kde \
-DCMAKE_CXX_FLAGS=${BUILD32} \
-DCMAKE_C_FLAGS=${BUILD32} \
.. &&
make

If kdebase fails "which it has done to me(oppiz) on several builds" let it error out with the ld lib64 type error. Start with clean source, run the cmake command above then switch to the below to make and make install. This is not proper and should not be done. It needs to be fixed and the problem located.

for file in $( find ./ -name build.make ); do sed -i 's:/lib64:/lib:g' $file ; done
for file in $( find ./ -name *link.txt ); do sed -i 's:/lib64:/lib:g' $file ; done
make

for file in $( find ./ -name cmake_install.cmake ); do sed -i 's:/lib64:/lib:g' $file ; done
make install

Install the Package

make install

=== N32 ===

=== 64Bit ===

mkdir -v build &&
cd build &&
USE_ARCH=64 PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} \
-DSYSCONF_INSTALL_DIR=/etc/kde \
-DLIB_SUFFIX=64 \
-DCMAKE_CXX_FLAGS=${BUILD64} \
-DCMAKE_C_FLAGS=${BUILD64} \
.. &&
make

Install the Package

make install

Libglade

2008-06-01T15:36:30Z

Bigdissaved: added deps

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ftp.gnome.org/pub/gnome/sources/libglade/{{Libglade-Version2}}/libglade-{{Libglade-Version}}.tar.bz2
|-
|}

----

{{Package-Introduction|Libglade is a library that performs a similar job to the C source output routines in the GLADE user interface builder. Whereas GLADE's output routines create C source code that must be compiled, libglade builds the interface from an XML file (GLADE's save format) at runtime. This can allow modifying the user interface without recompiling.|http://freshmeat.net/projects/libglade}}

== Dependencies ==

=== Required ===
* [[ATK]]
* [[LibXML2]]
* [[Gtk2]]
=== Optional ===
* [[Python]]
* [[Gtk-Doc]]

== Non-Multilib ==

Configure and compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Configure and compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Configure and compile the package:

sed -i '/default_dir = /s/"lib"/"lib32"/' glade/glade-init.c &&
CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Configure and compile the package:

sed -i '/default_dir = /s/"lib"/"lib64"/' glade/glade-init.c &&
CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| libglade-convert (requires '''python''')
|-valign="top"
! Installed Libraries:
| libglade-2.0.{so,a}
|-valign="top"
! Installed Directories:
| /usr/include/libglade-2.0, /usr/share/xml/libglade, and /usr/share/gtk-doc/html/libglade
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! libglade-convert
| is used to convert old Glade interface files to Glade-2.0 standards.
|-valign="top"
! libglade-2.0.{so,a}
| contain the functions necessary to load Glade interface files.
|}

Template:GPL Ghostscript-Version

2008-05-31T18:01:27Z

Bigdissaved:

8.62.0

GPL Ghostscript

2008-05-31T18:00:40Z

Bigdissaved: Update download URL

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.gnu.org/gnu/ghostscript/gnu-ghostscript-{{GPL Ghostscript-Version}}.tar.bz2
|-
!Standard Fonts:
| http://mirror.cs.wisc.edu/pub/mirrors/ghost/fonts/ghostscript-fonts-std-{{Ghostscript-Fonts-Std-Version}}.tar.gz
|-
!Other Fonts:
| http://ftp.gnu.org/pub/gnu/ghostscript/gnu-gs-fonts-other-{{GNU-GS-Fonts-Version}}.tar.gz
|}

----

{{Package-Introduction|The GPL Ghostscript package provides an interpreter for the PostScript language and the PDF file format,
a set of C procedures (the Ghostscript library) that implement the graphics capabilities that appear as primitive operations in the PostScript language, and a wide variety of output drivers for various file formats and printers.|http://www.gnu.org/software/ghostscript/ghostscript.html}}

== Dependencies ==

=== Optional ===
* [[CUPS]]
* [[Gtk2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

To build the shared libgs.so library you must have GTK+ installed and issue the following command:

make so

Install the package:

make install

If you built the shared library, install it and the associated programs by issuing the following commands as the root user:

make soinstall &&
install -v -d -m755 /usr/include/ps &&
install -v -m644 src/*.h /usr/include/ps &&
ln -v -s ps /usr/include/ghostscript

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" LDFLAGS="-L/usr/lib" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

To build the shared libgs.so library you must have GTK+ installed and issue the following command:

make so

Install the package

make install

If you built the shared library, install it and the associated programs by issuing the following commands as the root user:

make soinstall &&
install -v -d -m755 /usr/include/ps &&
install -v -m644 src/*.h /usr/include/ps &&
ln -v -s ps /usr/include/ghostscript

=== N32 ===

TO DO!

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" LDFLAGS="-L/usr/lib64" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

To build the shared libgs.so library you must have GTK+ installed and issue the following command:

make so

Install the package

make install

If you built the shared library, install it and the associated programs by issuing the following commands as the root user:

make soinstall &&
install -v -d -m755 /usr/include/ps &&
install -v -m644 src/*.h /usr/include/ps &&
ln -v -s ps /usr/include/ghostscript

== Fonts ==

To finish the installation, unpack all fonts you've downloaded to /usr/share/ghostscript

tar -xvf ../ghostscript-fonts-std-{{Ghostscript-Fonts-Std-Version}}.tar.gz -C /usr/share/ghostscript
tar -xvf ../gnu-gs-fonts-other-{{GNU-GS-Fonts-Version}}.tar.gz -C /usr/share/ghostscript

Ensure the ownerships of the files are root:root:

chown -v root:root /usr/share/ghostscript/fonts/*

PCI Utilities

2008-05-29T12:35:56Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.kernel.org/pub/software/utils/pciutils/pciutils-{{PCI Utilities-Version}}.tar.bz2
|}

----

{{Package-Introduction|PCI Utilities are various utilities that allow inspection and setting of devices connected to the PCI bus.}}

== Dependencies ==

=== Optional ===

**[[pkg-config]]
**[[Which]]

== Non-Multilib ==

Compile the package:

make PREFIX=/usr ZLIB=no

Install the package

make PREFIX=/usr install

Some packages require the PCI static library. To install the library and headers, issue the following command:

make PREFIX=/usr install-lib

=== Command Explanations ===

'''ZLIB=no''': This will make the '''pci.ids''' file usable for anything that expects an uncompressed version of the '''pci.ids''' file. Without this command the file would be called '''pci.ids.gz''', which is not compatbile with some programs. Compression of '''pci.ids''' was added with the 2.2.4 release.
If compressed support is enabled by '''ZLIB=yes''', pciutils will use pci.ids.gz in preference to pci.ids, even if the
pci.ids file is newer. If the pci.ids.gz file is missing, it will use pci.ids instead.
You can turn on compression support and uncompress '''pci.ids.gz''' to '''pci.ids''' after every update manually.

== Multilib ==

=== 32Bit ===

Compile the package:

make PREFIX=/usr CC="gcc ${BUILD32}" ZLIB=no

Install the package

make PREFIX=/usr install

Some packages require the PCI static library. To install the library and headers, issue the following commands:

make PREFIX=/usr install-lib

=== N32 ===

Compile the package:

make PREFIX=/usr LIBDIR=/usr/lib32 CC="gcc ${BUILDN32}" ZLIB=no

Install the package

make PREFIX=/usr LIBDIR=/usr/lib32 install

Some packages require the PCI static library. To install the library and headers, issue the following command:

make PREFIX=/usr LIBDIR=/usr/lib32 install-lib

=== 64Bit ===

Compile the package:

make PREFIX=/usr LIBDIR=/usr/lib64 CC="gcc ${BUILD64}" ZLIB=no

Install the package

make PREFIX=/usr LIBDIR=/usr/lib64 install

Some packages require the PCI static library. To install the library and headers, issue the following command:

make PREFIX=/usr LIBDIR=/usr/lib64 install-lib

== Configuring ==

=== pci.ids ===

The '''pci.ids''' data file is constantly being updated. To get a current version of this file run '''update-pciids'''. This program requires [[Which]] to find [[Curl]], [[Wget]], or [[Lynx]] which is used to download the most current file.

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| lspci, setpci and update-pciids
|-valign="top"
! Installed Libraries:
| libpci.a
|-valign="top"
! Installed Directories:
| /usr/include/pci
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! lspci
| is a utility for displaying information about all PCI buses in the system and all devices connected to them.
|-valign="top"
! setpci
| is a utility for querying and configuring PCI devices.
|-valign="top"
! update-pciids
| fetches the current version of the PCI ID list. Requires [[Curl]], [[Wget]] or [[Lynx]].
|-valign="top"
! libpci.a
| is the static library that allows applications to access the PCI subsystem.
|}

PCI Utilities

2008-05-29T12:34:38Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.kernel.org/pub/software/utils/pciutils/pciutils-{{PCI Utilities-Version}}.tar.bz2
|}

----

{{Package-Introduction|PCI Utilities are various utilities that allow inspection and setting of devices connected to the PCI bus.}}

== Dependencies ==

=== Optional ===

[[pkg-config]]
[[Wich]]

== Non-Multilib ==

Compile the package:

make PREFIX=/usr ZLIB=no

Install the package

make PREFIX=/usr install

Some packages require the PCI static library. To install the library and headers, issue the following command:

make PREFIX=/usr install-lib

=== Command Explanations ===

'''ZLIB=no''': This will make the '''pci.ids''' file usable for anything that expects an uncompressed version of the '''pci.ids''' file. Without this command the file would be called '''pci.ids.gz''', which is not compatbile with some programs. Compression of '''pci.ids''' was added with the 2.2.4 release.
If compressed support is enabled by '''ZLIB=yes''', pciutils will use pci.ids.gz in preference to pci.ids, even if the
pci.ids file is newer. If the pci.ids.gz file is missing, it will use pci.ids instead.
You can turn on compression support and uncompress '''pci.ids.gz''' to '''pci.ids''' after every update manually.

== Multilib ==

=== 32Bit ===

Compile the package:

make PREFIX=/usr CC="gcc ${BUILD32}" ZLIB=no

Install the package

make PREFIX=/usr install

Some packages require the PCI static library. To install the library and headers, issue the following commands:

make PREFIX=/usr install-lib

=== N32 ===

Compile the package:

make PREFIX=/usr LIBDIR=/usr/lib32 CC="gcc ${BUILDN32}" ZLIB=no

Install the package

make PREFIX=/usr LIBDIR=/usr/lib32 install

Some packages require the PCI static library. To install the library and headers, issue the following command:

make PREFIX=/usr LIBDIR=/usr/lib32 install-lib

=== 64Bit ===

Compile the package:

make PREFIX=/usr LIBDIR=/usr/lib64 CC="gcc ${BUILD64}" ZLIB=no

Install the package

make PREFIX=/usr LIBDIR=/usr/lib64 install

Some packages require the PCI static library. To install the library and headers, issue the following command:

make PREFIX=/usr LIBDIR=/usr/lib64 install-lib

== Configuring ==

=== pci.ids ===

The '''pci.ids''' data file is constantly being updated. To get a current version of this file run '''update-pciids'''. This program requires [[Which]] to find [[Curl]], [[Wget]], or [[Lynx]] which is used to download the most current file.

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| lspci, setpci and update-pciids
|-valign="top"
! Installed Libraries:
| libpci.a
|-valign="top"
! Installed Directories:
| /usr/include/pci
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! lspci
| is a utility for displaying information about all PCI buses in the system and all devices connected to them.
|-valign="top"
! setpci
| is a utility for querying and configuring PCI devices.
|-valign="top"
! update-pciids
| fetches the current version of the PCI ID list. Requires [[Curl]], [[Wget]] or [[Lynx]].
|-valign="top"
! libpci.a
| is the static library that allows applications to access the PCI subsystem.
|}

ALSA Utilities

2008-05-29T12:30:13Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-{{ALSA Utilities-Version}}.tar.bz2
|}

----

{{Package-Introduction|The ALSA Utilities package contains the command line utilities for the ALSA project. This package can be compiled only with the installed ALSA driver and the ALSA C library.|http://www.alsa-project.org/}}

== Dependencies ==

=== Required ===
* [[ALSA Library]]

=== Optional ===
* [[Dialog]] (used by alsaconf)

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[bootscripts]] package.

make install-alsa

{{Note|All channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.}}

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

udevtrigger /etc/udev/rules.d/15-alsa.rules

Using Newer udev, udevtrigger is removed from the install, use

udevadm trigger /etc/udev/rules.d/15-alsa.rules

* Note for users with multiple soundcards
[http://alsa.opensrc.org/MultipleCards Alsa tutorial for multiple soundcards]

The first time the alsactl program is run from the udev rule above, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directory:
| /usr/share/alsa/speaker-test, /ut/share/sounds/alsa
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! alsactl
| is a utility for soundcard settings management.
|-valign="top"
! alsaconf
| is the ALSA driver configurator script.
|-valign="top"
! aplay/arecord
| is a utility for the playback/capture of .wav,.voc,.au files.
|-valign="top"
! amixer
| is a command line mixer.
|-valign="top"
! alsamixer
| is an ncurses mixer.
|-valign="top"
! amidi
| is a utility to send/receive sysex dumps or other MIDI data.
|-valign="top"
! iecset
| is a utility to show/set the IEC958 status bits.
|-valign="top"
! aconnect
| ???
|-valign="top"
! aplaymidi
| ???
|-valign="top"
! arecordmidi
| ???
|-valign="top"
! aseqdump
| ???
|-valign="top"
! aseqnet
| ???
|-valign="top"
! speaker-test
| ???
|}

BIND

2008-04-13T07:06:00Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.isc.org/isc/bind{{BIND-Version2}}/{{BIND-Version}}/bind-{{BIND-Version}}.tar.gz
|-
!Alternate Download Source:
| http://gd.tuwien.ac.at/infosys/servers/bind{{BIND-Version2}}/{{BIND-Version}}/bind-{{BIND-Version}}.tar.gz
|}

{{Package-Introduction|BIND (Berkeley Internet Name Domain) is an implementation of the DNS protocols and provides an openly redistributable reference implementation of the major components of the Domain Name System.|http://www.bind9.net/}}

== Dependencies ==

=== Optional ===

* [[OpenSSL]] (Recommended for secure environments)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-threads --with-libtool &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-threads \
--with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 --sysconfdir=/etc --localstatedir=/var \
--enable-threads --with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-n32}

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 --sysconfdir=/etc --localstatedir=/var \
--enable-threads --with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/isc-config.sh

== BootScript ==

Install the init script included in the [[bootscripts]] package.

make install-bind

== Configuration ==

Time premiting, the configuration for bind will be put here. For the time being, the following link cam be used to set up a simple lookup nameserver.

http://www.unixwiz.net/techtips/bind9-chroot.html

BIND

2008-04-13T07:05:22Z

Bigdissaved: config

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.isc.org/isc/bind{{BIND-Version2}}/{{BIND-Version}}/bind-{{BIND-Version}}.tar.gz
|-
!Alternate Download Source:
| http://gd.tuwien.ac.at/infosys/servers/bind{{BIND-Version2}}/{{BIND-Version}}/bind-{{BIND-Version}}.tar.gz
|}

{{Package-Introduction|BIND (Berkeley Internet Name Domain) is an implementation of the DNS protocols and provides an openly redistributable reference implementation of the major components of the Domain Name System.|http://www.bind9.net/}}

== Dependencies ==

=== Optional ===

* [[OpenSSL]] (Recommended for secure environments)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-threads --with-libtool &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-threads \
--with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 --sysconfdir=/etc --localstatedir=/var \
--enable-threads --with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-n32}

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 --sysconfdir=/etc --localstatedir=/var \
--enable-threads --with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/isc-config.sh

=== BootScript ===

Install the init script included in the [[bootscripts]] package.

make install-bind

=== Configuration ===

Time premiting, the configuration for bind will be put here. For the time being, the following link cam be used to set up a simple lookup nameserver.

http://www.unixwiz.net/techtips/bind9-chroot.html

Dhcp

2008-03-31T16:04:07Z

Bigdissaved: /* BootScript */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://gd.tuwien.ac.at/infosys/servers/isc/dhcp/dhcp-{{Dhcp-Version}}.tar.gz
|}
{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Patch:
| http://svn.cross-lfs.org/svn/repos/patches/dhcp/dhcp-{{Dhcp-Version}}-iproute2-1.patch
|}

----

{{Package-Introduction|The DHCP package contains both the client and server programs for DHCP. '''dhclient''' (the client) is useful for connecting your computer to a network which uses DHCP to assign network addresses. '''dhcpd''' (the server) is useful for assigning network addresses on your private network.}}

== Dependencies ==

=== Required (If not using the iproute2 patch) ===
* [[NetTools]]

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../dhcp-{{Dhcp-Version}}-iproute2-1.patch &&
./configure &&
make

Install the package

make LIBDIR=/usr/lib INCDIR=/usr/include install

== Multilib ==

=== 32Bit ===

Compile the package:

patch -Np1 -i ../dhcp-{{Dhcp-Version}}-iproute2-1.patch &&
./configure &&
make CC="gcc ${BUILD32}" &&

Install the package

make LIBDIR=/usr/lib INCDIR=/usr/include install

=== N32 ===

Compile the package

patch -Np1 -i ../dhcp-{{Dhcp-Version}}-iproute2-1.patch
./configure &&
make CC="gcc ${BUILDN64}"

Install the package

make LIBDIR=/usr/lib32 INCDIR=/usr/include install

=== 64Bit ===

Compile the package

patch -Np1 -i ../dhcp-{{Dhcp-Version}}-iproute2-1.patch
./configure &&
make CC="gcc ${BUILD64}"

Install the package

make LIBDIR=/usr/lib64 INCDIR=/usr/include install

== Configuring ==

touch /var/state/dhcp/dhcpd.leases

cat > /etc/dhcpd.conf << "EOF"
allow unknown-clients;
server-identifier 192.168.1.254;
ddns-update-style interim;

subnet 192.168.1.0 netmask 255.255.255.0 {
option broadcast-address 192.168.1.255;
range 192.168.1.100 192.168.1.200;
default-lease-time 86400;
max-lease-time 86400;
option subnet-mask 255.255.255.0;
option domain-name-servers DNS_SERVER_NAMES;
option routers 192.168.1.254;
}
EOF

=== BootScript ===

Install the init script included in the [[bootscripts]] package.

make install-dhcp

{{Note|Make sure to change the adapter for dhcp in the bootscript}}

BIND

2008-03-31T16:00:04Z

Bigdissaved: added Bootscript section

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.isc.org/isc/bind{{BIND-Version2}}/{{BIND-Version}}/bind-{{BIND-Version}}.tar.gz
|-
!Alternate Download Source:
| http://gd.tuwien.ac.at/infosys/servers/bind{{BIND-Version2}}/{{BIND-Version}}/bind-{{BIND-Version}}.tar.gz
|}

{{Package-Introduction|BIND (Berkeley Internet Name Domain) is an implementation of the DNS protocols and provides an openly redistributable reference implementation of the major components of the Domain Name System.|http://www.bind9.net/}}

== Dependencies ==

=== Optional ===

* [[OpenSSL]] (Recommended for secure environments)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-threads --with-libtool &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-threads \
--with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 --sysconfdir=/etc --localstatedir=/var \
--enable-threads --with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-n32}

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 --sysconfdir=/etc --localstatedir=/var \
--enable-threads --with-libtool &&
make

Install the package

make install &&
mv -v /usr/bin/isc-config.sh{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/isc-config.sh

=== BootScript ===

Install the init script included in the [[bootscripts]] package.

make install-bind

BIND

2008-03-31T15:56:41Z

Bigdissaved: Added Package intro and URL

BIND Utilities

2008-03-31T15:55:30Z

Bigdissaved: package info

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.isc.org/isc/bind{{BIND-Version2}}/{{BIND-Version}}/bind-{{BIND-Version}}.tar.gz
|-
!Alternate Download Source:
| http://gd.tuwien.ac.at/infosys/servers/isc/bind{{BIND-Version2}}/{{BIND-Version}}/bind-{{BIND-Version}}.tar.gz
|}

{{Package-Introduction|BIND (Berkeley Internet Name Domain) is an implementation of the DNS protocols and provides an openly redistributable reference implementation of the major components of the Domain Name System.|http://www.bind9.net/}}

== Dependencies ==

=== Optional ===
* [[OpenSSL]] (Recommended for secure environments)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make -C lib/dns &&
make -C lib/isc &&
make -C lib/bind9 &&
make -C lib/isccfg &&
make -C lib/lwres &&
make -C bin/dig

Install the package

make -C bin/dig install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make -C lib/dns &&
make -C lib/isc &&
make -C lib/bind9 &&
make -C lib/isccfg &&
make -C lib/lwres &&
make -C bin/dig

Install the package

make -C bin/dig install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr &&
make -C lib/dns &&
make -C lib/isc &&
make -C lib/bind9 &&
make -C lib/isccfg &&
make -C lib/lwres &&
make -C bin/dig

Install the package

make -C bin/dig install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr &&
make -C lib/dns &&
make -C lib/isc &&
make -C lib/bind9 &&
make -C lib/isccfg &&
make -C lib/lwres &&
make -C bin/dig

Install the package

make -C bin/dig install

Libacovea

2008-03-31T06:48:45Z

Bigdissaved:

{|style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://www.coyotegulch.com/distfiles/libacovea-{{Libacovea-Version}}.tar.gz
|}

----

{{Package-Introduction|ACOVEA (Analysis of Compiler Options via Evolutionary Algorithm) is a benchmarking utility that uses a genetic algorithm to find the "best" options for compiling C/C++ programs with GCC. These "best" flag combinations are machine-specific.|http://www.coyotegulch.com/products/acovea/index.html}}

== Dependencies ==

=== Required ===
* [[Expat]]
* [[libcoyotl]]
* [[libevocosm]]

=== Optional ===
* [[Doxygen]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

== Configuring ==

There are example XML files created in /usr/share/libacovea/config that provide different combinations of flags for different GCC versions and different processors. Copy one of these and edit for your machine and GCC version. This configuration file is passed as an argument to runacovea along with the C/C++ program being benchmarked.

Benchmarking programs are provided in /usr/share/libacovea/benchmarks. Acovea is not intended to use large applications, so don't try to benchmark using Gtk+! Each of the benchmarks could be executed for a given configuration with the following script:

#!/bin/sh
BENCHES="alma evo fft huff lin mat1 tree"
CONFIGS="g++33_pentium4"

for config in $CONFIGS; do
for bench in $BENCHES; do
echo ""
echo "*** $bench ***"
time runacovea -config /usr/share/libacovea/config/${config}.acovea -input /usr/share/libacovea/benchmarks/${bench}bench.c 1> ${bench}_${config}.run 2> ${bench}_${config}.err
done
done

It will take quite awhile to execute every combination. For example, 20 iterations of the fftbench required 1 hour and 40 minutes on an machine with an AMD64 X2 5600+ processor and 2GB of 533MHz DDR2 RAM.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/share/libacovea/benchmarks, /share/libacovea/config
|-valign="top"
!Installed Programs:
|None
|-valign="top"
!Installed Libraries:
|libcyotl.{a,la,so}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!runacovea
|is a program to investigate the "best" GCC complier options for your machine.
|-
!libacovea
|is the library containing the evolutionary algorithm functions.
|}

Libcoyotl

2008-03-31T06:29:37Z

Bigdissaved: Added Libpng for Required

{|style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://www.coyotegulch.com/distfiles/libcoyotl-{{libcoyotl-Version}}.tar.gz
|}

----

{{Package-Introduction|Coyotl is a library of functions used by [[libacovea]].|http://www.coyotegulch.com/products/libcoyotl/index.html}}

== Dependencies ==
* [[Libpng]]

=== Optional ===
* [[Doxygen]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|None
|-valign="top"
!Installed Programs:
|None
|-valign="top"
!Installed Libraries:
|libcyotl.{a,la,so}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!libcoyotl
|is a library of functions used by [[libacovea]]
|}

Libacovea

2008-03-31T06:27:43Z

Bigdissaved: Reverted edits by Bigdissaved (Talk); changed back to last version by Weibullguy

{|style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://www.coyotegulch.com/distfiles/libacovea-{{Libacovea-Version}}.tar.gz
|}

----

{{Package-Introduction|ACOVEA (Analysis of Compiler Options via Evolutionary Algorithm) is a benchmarking utility that uses a genetic algorithm to find the "best" options for compiling C/C++ programs with GCC. These "best" flag combinations are machine-specific.|http://www.coyotegulch.com/products/acovea/index.html}}

== Dependencies ==

=== Required ===
* [[libcoyotl]]
* [[libevocosm]]

=== Optional ===
* [[Doxygen]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

== Configuring ==

There are example XML files created in /usr/share/libacovea/config that provide different combinations of flags for different GCC versions and different processors. Copy one of these and edit for your machine and GCC version. This configuration file is passed as an argument to runacovea along with the C/C++ program being benchmarked.

Benchmarking programs are provided in /usr/share/libacovea/benchmarks. Acovea is not intended to use large applications, so don't try to benchmark using Gtk+! Each of the benchmarks could be executed for a given configuration with the following script:

#!/bin/sh
BENCHES="alma evo fft huff lin mat1 tree"
CONFIGS="g++33_pentium4"

for config in $CONFIGS; do
for bench in $BENCHES; do
echo ""
echo "*** $bench ***"
time runacovea -config /usr/share/libacovea/config/${config}.acovea -input /usr/share/libacovea/benchmarks/${bench}bench.c 1> ${bench}_${config}.run 2> ${bench}_${config}.err
done
done

It will take quite awhile to execute every combination. For example, 20 iterations of the fftbench required 1 hour and 40 minutes on an machine with an AMD64 X2 5600+ processor and 2GB of 533MHz DDR2 RAM.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/share/libacovea/benchmarks, /share/libacovea/config
|-valign="top"
!Installed Programs:
|None
|-valign="top"
!Installed Libraries:
|libcyotl.{a,la,so}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!runacovea
|is a program to investigate the "best" GCC complier options for your machine.
|-
!libacovea
|is the library containing the evolutionary algorithm functions.
|}

Libacovea

2008-03-31T06:27:12Z

Bigdissaved: Added Libpng for Required

{|style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://www.coyotegulch.com/distfiles/libacovea-{{Libacovea-Version}}.tar.gz
|}

----

{{Package-Introduction|ACOVEA (Analysis of Compiler Options via Evolutionary Algorithm) is a benchmarking utility that uses a genetic algorithm to find the "best" options for compiling C/C++ programs with GCC. These "best" flag combinations are machine-specific.|http://www.coyotegulch.com/products/acovea/index.html}}

== Dependencies ==

=== Required ===
* [[Libpng]]
* [[libcoyotl]]
* [[libevocosm]]

=== Optional ===
* [[Doxygen]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

If you have [[Doxygen]] installed, build the documentation:

make docs

Install the package:

make install

== Configuring ==

There are example XML files created in /usr/share/libacovea/config that provide different combinations of flags for different GCC versions and different processors. Copy one of these and edit for your machine and GCC version. This configuration file is passed as an argument to runacovea along with the C/C++ program being benchmarked.

Benchmarking programs are provided in /usr/share/libacovea/benchmarks. Acovea is not intended to use large applications, so don't try to benchmark using Gtk+! Each of the benchmarks could be executed for a given configuration with the following script:

#!/bin/sh
BENCHES="alma evo fft huff lin mat1 tree"
CONFIGS="g++33_pentium4"

for config in $CONFIGS; do
for bench in $BENCHES; do
echo ""
echo "*** $bench ***"
time runacovea -config /usr/share/libacovea/config/${config}.acovea -input /usr/share/libacovea/benchmarks/${bench}bench.c 1> ${bench}_${config}.run 2> ${bench}_${config}.err
done
done

It will take quite awhile to execute every combination. For example, 20 iterations of the fftbench required 1 hour and 40 minutes on an machine with an AMD64 X2 5600+ processor and 2GB of 533MHz DDR2 RAM.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/share/libacovea/benchmarks, /share/libacovea/config
|-valign="top"
!Installed Programs:
|None
|-valign="top"
!Installed Libraries:
|libcyotl.{a,la,so}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!runacovea
|is a program to investigate the "best" GCC complier options for your machine.
|-
!libacovea
|is the library containing the evolutionary algorithm functions.
|}

OpenSSL

2008-03-31T03:38:57Z

Bigdissaved: Sparc non-multilib Note

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.openssl.org/source/openssl-{{OpenSSL-Version}}.tar.gz
|-
!Download Source:
| ftp://ftp.openssl.org/source/openssl-{{OpenSSL-Version}}.tar.gz
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-{{OpenSSL-Version}}-fix_manpages-1.patch
|-
!Required Patch (Multilib):
| http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-{{OpenSSL-Version}}-allow_lib64-1.patch
|-
!Required Patch (x86_64 Multilib):
| http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-{{OpenSSL-Version}}-32bit_x86_64-1.patch
|-
!Required Patch (MIPS):
| http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-{{OpenSSL-Version}}-mips_support-1.patch
|}

----

{{Package-Introduction|OpenSSH implements encrypted transports over SSL (v2 and v3) and TLSv1, and also serve as a general purpose encryption library|http://www.openssl.org/ }}

== Dependencies ==

=== Optional ===
* [[bc]] (used by the testsuite)
* [[MIT krb5]] | [[Heimdal]]

{{Note|Openssl does NOT like parallel building very much. So for that reason please refrain from using -j in your make command.}}

== Non-Multilib ==

{{Note|When building on Sparc in Pure 64bit, use the configure command from the multilib section, then proceed as normal}}
Compile the package:

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-fix_manpages-1.patch &&
./config --openssldir=/etc/ssl --prefix=/usr shared &&
make MANDIR=/usr/share/man

Install the package

make MANDIR=/usr/share/man install &&
cp -v -r certs /etc/ssl &&
install -v -d -m755 /usr/share/doc/openssl-{{OpenSSL-Version}} &&
cp -v -r doc/{HOWTO,README,*.{txt,html,gif}} \
/usr/share/doc/openssl-{{OpenSSL-Version}}

== Multilib ==

=== 32Bit ===

Configure the Package (Use the appropriate command):

==== x86_64 ====

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-32bit_x86_64-1.patch &&
./Configure linux-x86_64-32 --openssldir=/etc/ssl --prefix=/usr shared

==== Sparc ====

./Configure linux-sparcv9 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Little-Endian) ====

./Configure linux-mipsel --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

./Configure linux-mips --openssldir=/etc/ssl --prefix=/usr shared

==== PowerPC ====

./Configure linux-ppc --openssldir=/etc/ssl --prefix=/usr/shared

Compile the package:

USE_ARCH=32 make CC="gcc ${BUILD32}" PERL=/usr/bin/perl

Install the package:

USE_ARCH=32 make PERL=/usr/bin/perl MANDIR=/usr/share/man install

=== N32 ===

This patch allows OpenSSL to be installed a dir other then lib.

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-allow_lib64-1.patch

Configure the Package (Use the appropriate command):

==== Mips (Little-Endian) ====

./Configure linux-mipsel-n32 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

./Configure linux-mips-n32 --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

USE_ARCH=n32 make CC="gcc ${BUILDN32}" PERL=/usr/bin/perl LIBDIR=lib32

Install the package:

USE_ARCH=n32 make PERL=/usr/bin/perl MANDIR=/usr/share/man LIBDIR=lib32 install

=== 64Bit ===

This patch allows OpenSSL to be installed into a dir other then lib:

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-allow_lib64-1.patch

Configure the Package (Use the appropriate command):

==== x86_64 ====

./Configure linux-x86_64 --openssldir=/etc/ssl --prefix=/usr shared

==== Sparc ====

./Configure linux64-sparcv9 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Little-Endian) ====

./Configure linux-mips64el --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

./Configure linux-mips64 --openssldir=/etc/ssl --prefix=/usr shared

==== PowerPC ====

./Configure linux-ppc64 --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

USE_ARCH=64 make CC="gcc ${BUILD64}" PERL=/usr/bin/perl LIBDIR=lib64

Install the package:

USE_ARCH=64 make PERL=/usr/bin/perl MANDIR=/usr/share/man LIBDIR=lib64 install

= Contents =

{| style="text-align: left;"
|-
! Installed Programs:
| c_rehash, openssl
|-
! Installed Libraries:
| libcrypto.{so,a}, libssl.{so,a}
|-
! Installed Directories:
| /etc/ssl, /usr/include/ssl, /usr/lib/engines, /usr/share/doc/openssl-{{OpenSSL-Version}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-
! c_rehash
| is a Perl script that scans all files in a directory and adds symbolic links to their hash values.
|-valign="top"
! openssl
| is a command-line tool for using the various cryptography functions of OpenSSL's crypto library from the shell.
|-
! libcrypto.{so,a}
| implements a wide range of cryptographic algorithms used in various Internet standards.
|-
!libssl.{so,a}
| implements the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols
|}

CUPS

2008-03-08T19:12:33Z

Bigdissaved: added ln line for smb support

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://downloads.sourceforge.net/cups/cups-{{CUPS-Version}}-source.tar.bz2
|}

----

{{Package-Introduction|The Common Unix Printing System (CUPS) is a print spooler and associated utilities. It is based on the "Internet Printing Protocol" and provides printing services to most PostScript and raster printers.}}

{{Note|If you get "Unsuported format, application/postscript" errors, try installing Cups/Ghostscript/foomatic (if needed), then start cups.}}

== Dependencies ==

=== Required ===
* [[libjpeg]]
* [[libpng]]
* [[LibTIFF]]

=== Optional ===
* [[OpenSSL]] or [[GnuTLS]]
* [[D-BUS]]
* [[Linux-PAM]]
* [[PHP]]
* [[Python]]
* [[JDK]]
* [[OpenSLP]]
* [[libpaper]]
* [[Valgrind]]
* [[Samba]]

== Configuration Information ==

{{Note|CUPS does not use ''DESTDIR'', CUPS uses ''BUILDROOT'' instead. Use ''BUILDROOT'' as you would normally use ''DESTDIR''.}}

== Creating the lp User ==

useradd -c "Print Service User" -d /dev/null -g lp -s /bin/false -u 10 lp

== Non-Multilib ==

If you utilize [[Linux-PAM]], you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

./configure &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support

ln -s `which smbspool` /usr/lib/cups/backend/smb

== Multilib ==

=== 32Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 ./configure \
--libdir=/usr/lib &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-32}

If wanting to print to a Windows printer, pass this line to add smb support (Untested)

ln -s `which smbspool` /usr/lib/cups/backend/smb

=== N32 ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 ./configure \
--libdir=/usr/lib32 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-n32}

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib32/cups/backend/smb

=== 64Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 ./configure \
--libdir=/usr/lib64 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/cups-config

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib64/cups/backend/smb

== Configuring ==

=== BootScript ===

Install the init script included in the [[bootscripts]] package.

make install-cups

Template:NetPlug-Version

2008-03-08T18:45:42Z

Bigdissaved: New page: 1.2.9

1.2.9

Netplug

2008-03-08T18:45:24Z

Bigdissaved: put template for version

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|-
| http://www.red-bean.com/~bos/netplug/netplug-{{NetPlug-Version}}.tar.bz2
|-
!Download Patches:
|-
| http://svn.cross-lfs.org/svn/repos/patches/netplug/netplug-{{NetPlug-Version}}-gcc4-1.patch
|-
| http://svn.cross-lfs.org/svn/repos/patches/netplug/netplug-{{NetPlug-Version}}-ignore-wireless-1.patch
|-
| http://svn.cross-lfs.org/svn/repos/patches/netplug/netplug-{{NetPlug-Version}}-remove-nest-1.patch
|}

----

{{Package-Introduction|'''Netplug''' is a Linux daemon that brings up/down network interfaces in response to network cables being plugged in and out. This application is mostly useful for a laptop or computer (used for lan parties?) that is often relocated to different LANs.

The netplugd rc script shared below replaces the clfs-bootscripts network script. If you remove the network script and symlinks in the rc#.d directories, and later decide you want them, then merely reinstall from the clfs-bootscripts.}}

== Dependencies ==

== Configuration Information ==

This package does not use a configure script. Any additional configuration must be made within the Makefile.

== Non-Multilib ==

Modify the Makefile:

remove=" -ggdb3 "
[[ " ${CFLAGS} " == *" -O"[0-9]" "* ]] && remove="${remove}-O3 "
sed -i -e "s/${remove}/ /" Makefile
sed -i '/bk_root/,$d' Makefile

Compile the package:

patch -Np0 -i ../netplug-{{NetPlug-Version}}-gcc4-1.patch &&
patch -Np1 -i ../netplug-{{NetPlug-Version}}-remove-nest-1.patch &&
patch -Np1 -i ../netplug-{{NetPlug-Version}}-ignore-wireless-1.patch &&
make

Install the package:

make install

=== Command Explanations ===

{|-
| '''remove...'''
|-
| '''[[ "$C...'''
|-
| '''sed -i...:''' These commands remove -O3 (if you are using another optimization) and debugging from the Makefile.
'''sed -i '/bk_root/,$d' Makefile:''' This removes the bitkeeper stuff, you might omit this if you are using it.

== Multilib ==
'''''This package does not install any libraries so only one installation is needed.'''''

=== 32Bit ===

Modify the Makefile:

remove=" -ggdb3 "
[[ " ${CFLAGS} " == *" -O"[0-9]" "* ]] && remove="${remove}-O3 "
sed -i -e "s/${remove}/ /" Makefile
sed -i '/bk_root/,$d' Makefile

Compile the package:

patch -Np0 -i ../netplug-{{NetPlug-Version}}-gcc4-1.patch &&
patch -Np1 -i ../netplug-{{NetPlug-Version}}-remove-nest-1.patch &&
patch -Np1 -i ../netplug-{{NetPlug-Version}}-ignore-wireless-1.patch &&
make CC="gcc ${BUILD32}"

Install the package:

make install

=== N32 ===

Modify the Makefile:

remove=" -ggdb3 "
[[ " ${CFLAGS} " == *" -O"[0-9]" "* ]] && remove="${remove}-O3 "
sed -i -e "s/${remove}/ /" Makefile
sed -i '/bk_root/,$d' Makefile

Compile the package:

patch -Np0 -i ../netplug-{{NetPlug-Version}}-gcc4-1.patch &&
patch -Np1 -i ../netplug-{{NetPlug-Version}}-remove-nest-1.patch &&
patch -Np1 -i ../netplug-{{NetPlug-Version}}-ignore-wireless-1.patch &&
make CC="gcc ${BUILDN32}"

Install the package:

make install

=== 64Bit ===

Modify the Makefile:

remove=" -ggdb3 "
[[ " ${CFLAGS} " == *" -O"[0-9]" "* ]] && remove="${remove}-O3 "
sed -i -e "s/${remove}/ /" Makefile
sed -i '/bk_root/,$d' Makefile

Compile the package:

patch -Np0 -i ../netplug-{{NetPlug-Version}}-gcc4-1.patch &&
patch -Np1 -i ../netplug-{{NetPlug-Version}}-remove-nest-1.patch &&
patch -Np1 -i ../netplug-{{NetPlug-Version}}-ignore-wireless-1.patch &&
make CC="gcc ${BUILD64}"

Install the package:

make install

== Configuring ==

The rc script below is customized for a CLFS system. Feel free to modify this
as necessary for your system. Create the netplugd script:

cat > /etc/rc.d/init.d/netplugd << EOF
#!/bin/sh
########################################################################
# Begin $rc_base/init.d/netplugd
#
# Description : Netplugd-{{NetPlug-Version}}
#
# Authors : Harvey Muller
#
# Version : 00.02
#
# Notes : Still beta
#
########################################################################

. /etc/sysconfig/rc
. ${rc_functions}

if [ ! -x /sbin/netplugd ]; then
echo "/sbin/netplugd missing, or needs to be installed ..."
exit 1
fi

# Use netplugd if present, it supplies NETPLUGDARGS if needed.
if [ -f /etc/sysconfig/netplugd ]; then
. /etc/sysconfig/netplugd
fi

if [ `id -u` != "0" ] && [ "$1" = "start" -o "$1" = "stop" ] ; then
echo "You must be root to start, stop or restart netplugd."
exit 1
fi

case "${1}" in
start)
boot_mesg "Starting network plug daemon..."
loadproc /sbin/netplugd ${NETPLUGDARGS} -p /var/run/netplugd.pid
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/netplugd
;;

stop)
boot_mesg "Stopping network plug daemon..."
killproc netplugd
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/netplugd
;;

restart|reload)
${0} stop
${0} start
;;

status)
statusproc netplugd
RETVAL=$?
;;

condrestart)
[ -f /var/lock/subsys/netplugd ] && restart || :
;;

*)
echo "Usage: ${0} {start|stop|reload|restart|status|condrestart}"
exit 1
;;
esac

exit $RETVAL

# End $rc_base/init.d/netplugd
EOF

The [[bootscripts]] network rc script is no longer necessary. You may remove the network script and symlinks with these commands:

rm -rf /etc/rc.d/init.d/network
rm -rf /etc/rc.d/rc*.d/{S2,K8}0network

Create symlinks to netplugd script:

ln -sf /etc/rc.d/init.d/netplugd /etc/rc.d/rc0.d/K80netplugd
ln -sf /etc/rc.d/init.d/netplugd /etc/rc.d/rc1.d/K80netplugd
ln -sf /etc/rc.d/init.d/netplugd /etc/rc.d/rc2.d/S20netplugd
ln -sf /etc/rc.d/init.d/netplugd /etc/rc.d/rc3.d/S20netplugd
ln -sf /etc/rc.d/init.d/netplugd /etc/rc.d/rc4.d/S20netplugd
ln -sf /etc/rc.d/init.d/netplugd /etc/rc.d/rc5.d/S20netplugd
ln -sf /etc/rc.d/init.d/netplugd /etc/rc.d/rc6.d/K80netplugd

If you have configured your wired interface through udev (or other means) to be named eth0, and you only have one wired interface, then we may as well configure netplug to use it only:

sed -i 's/eth\*/eth0/' /etc/netplug/netplugd.conf

Netplug requires the /var/lock/subsys directory be present, and the Makefile doesn't create it:

[ -d /var/lock/subsys ] || install -d -m755 /var/lock/subsys

You could just modify the policy agent to reflect the CLFS locations, but let's make links in /sbin for ifup and ifdown:

ln -sf /etc/sysconfig/network-devices/ifup /sbin/ifup
ln -sf /etc/sysconfig/network-devices/ifdown /sbin/ifdown

= Contents =

Installed Programs: /sbin/netplugd

Installed Libraries: none

Installed Directories: /etc/netplug, /etc/netplug.d, /var/lock/subsys

Installed Scripts: /etc/netplug.d/netplug, /etc/rc.d/init.d/netplugd

Installed Documentation: /usr/share/man/man8/netplugd.8

=== Short Descriptions ===

netplugd: a daemon which automatically brings your network interface up/down based on cable insertion/removal.

Dvd+rw-tools

2008-03-05T13:09:50Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://fy.chalmers.se/~appro/linux/DVD+RW/tools/dvd+rw-tools-{{Dvd+rw-tools-Version}}.tar.gz
|}

----

{{Package-Introduction|The dvd+rw-tools package contains several utilities to master the DVD media, both +RW/+R and -R[W]. The principle tool is '''growisofs''' which provides a way to both lay down and grow an ISO9660 file system on (as well as to burn an arbitrary pre-mastered image to) all supported DVD media. This is useful for creating a new DVD or adding to an existing image on a partially burned DVD.}}

== Dependencies ==

=== Required ===
* [[Cdrtools]]

== Non-Multilib ==

When using CLFS based on 2.6.23 kernels, do

sed -i "628i\#include <limits.h>" growisofs.c
sed -i "198i\#include <limits.h>" transport.hxx

Compile the package:

make all rpl8 btcflash

Install the package

make prefix=/usr install &&
install -v -m644 -D index.html \
/usr/share/doc/dvd+rw-tools-{{Dvd+rw-tools-Version}}/index.html

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

When using CLFS based on 2.6.23 kernels, do

sed -i "628i\#include <limits.h>" growisofs.c
sed -i "198i\#include <limits.h>" transport.hxx

Compile the package:

make CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" all rpl8 btcflash

Install the package

make prefix=/usr install &&
install -v -m644 -D index.html \
/usr/share/doc/dvd+rw-tools-{{Dvd+rw-tools-Version}}/index.html

=== N32 ===

When using CLFS based on 2.6.23 kernels, do

sed -i "628i\#include <limits.h>" growisofs.c
sed -i "198i\#include <limits.h>" transport.hxx

Compile the package:

make CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" all rpl8 btcflash

Install the package

make prefix=/usr install &&
install -v -m644 -D index.html \
/usr/share/doc/dvd+rw-tools-{{Dvd+rw-tools-Version}}/index.html

=== 64Bit ===

When using CLFS based on 2.6.23 kernels, do

sed -i "628i\#include <limits.h>" growisofs.c
sed -i "198i\#include <limits.h>" transport.hxx

Compile the package:

make CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" all rpl8 btcflash

Install the package

make prefix=/usr install &&
install -v -m644 -D index.html \
/usr/share/doc/dvd+rw-tools-{{Dvd+rw-tools-Version}}/index.html

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| growisofs, dvd+rw-format, dvd+rw-booktype, dvd+rw-mediainfo, dvd-ram-control, rpl8, btcflash
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directory:
| /usr/share/doc/dvd+rw-tools-{{Dvd+rw-tools-Version}}
|}

Template:Popt-Version

2008-02-28T03:16:37Z

Bigdissaved:

1.13

Popt

2008-02-28T03:16:04Z

Bigdissaved:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://rpm5.org/files/popt/popt-{{Popt-Version}}.tar.gz
|}

----

{{Package-Introduction|Popt is a C library for parsing command line parameters. Popt was heavily influenced by the getopt() and getopt_long() functions, but it improves on them by allowing more powerful argument expansion. Popt can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. Popt allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules.
|http://freshmeat.net/projects/popt}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --libdir=/usr/lib &&
make

Install the package

sed -i "s@$^libdir='$.*@\1/usr/lib'@g" libpopt.la &&
sed -i "s@$^libdir='$.*@\1/usr/lib'@g" .libs/libpopt.lai &&
make usrlibdir=/usr/lib install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr --libdir=/usr/lib &&
make

Install the package

sed -i "s@$^libdir='$.*@\1/usr/lib'@g" libpopt.la &&
sed -i "s@$^libdir='$.*@\1/usr/lib'@g" .libs/libpopt.lai &&
make usrlibdir=/usr/lib install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

sed -i "s@$^libdir='$.*@\1/usr/lib32'@g" libpopt.la &&
sed -i "s@$^libdir='$.*@\1/usr/lib32'@g" .libs/libpopt.lai &&
make usrlibdir=/usr/lib32 install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

sed -i "s@$^libdir='$.*@\1/usr/lib64'@g" libpopt.la &&
sed -i "s@$^libdir='$.*@\1/usr/lib64'@g" .libs/libpopt.lai &&
make usrlibdir=/usr/lib64 install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| None
|-valign="top"
! Installed Libraries:
| libpopt.{so,a}
|-valign="top"
! Installed Directories:
| /usr/share/doc/popt-{{Popt-Version}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! libpopt.{so,a}
| is used to parse command-line options.
|}

Popt

2008-02-28T03:12:42Z

Bigdissaved: Added Package intro and URL

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.gentoolabs.com.ar/distfiles/popt-{{Popt-Version}}.tar.gz
|}

----

{{Package-Introduction|Popt is a C library for parsing command line parameters. Popt was heavily influenced by the getopt() and getopt_long() functions, but it improves on them by allowing more powerful argument expansion. Popt can parse arbitrary argv[] style arrays and automatically set variables based on command line arguments. Popt allows command line arguments to be aliased via configuration files and includes utility functions for parsing arbitrary strings into argv[] arrays using shell-like rules.
|http://freshmeat.net/projects/popt}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --libdir=/usr/lib &&
make

Install the package

sed -i "s@$^libdir='$.*@\1/usr/lib'@g" libpopt.la &&
sed -i "s@$^libdir='$.*@\1/usr/lib'@g" .libs/libpopt.lai &&
make usrlibdir=/usr/lib install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr --libdir=/usr/lib &&
make

Install the package

sed -i "s@$^libdir='$.*@\1/usr/lib'@g" libpopt.la &&
sed -i "s@$^libdir='$.*@\1/usr/lib'@g" .libs/libpopt.lai &&
make usrlibdir=/usr/lib install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

sed -i "s@$^libdir='$.*@\1/usr/lib32'@g" libpopt.la &&
sed -i "s@$^libdir='$.*@\1/usr/lib32'@g" .libs/libpopt.lai &&
make usrlibdir=/usr/lib32 install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

sed -i "s@$^libdir='$.*@\1/usr/lib64'@g" libpopt.la &&
sed -i "s@$^libdir='$.*@\1/usr/lib64'@g" .libs/libpopt.lai &&
make usrlibdir=/usr/lib64 install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| None
|-valign="top"
! Installed Libraries:
| libpopt.{so,a}
|-valign="top"
! Installed Directories:
| /usr/share/doc/popt-{{Popt-Version}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! libpopt.{so,a}
| is used to parse command-line options.
|}