CBLFS - User contributions [en]

RPM

2013-01-22T18:41:36Z

Cosmo:

This page is for RPM.ORG, for RPM5 view [[RPM5]].

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://rpm.org/releases/rpm-{{RPM-Version}}.x/rpm-{{RPM-Version2}}.tar.bz2
|}

{{Package-Introduction|RPM is a command-line package management system capable of installing, uninstalling, verifying, querying, and updating Unix software packages.|http://rpm.org/}}

== Dependencies ==

=== Required ===
* [[NSPR]]
* [[NSS]]

=== Optional ===
* [[Lua]]
* [[NLS]]
* [[SELinux]]
* [[Doxygen]]

=== Not-Recommended ===
* External [[Berkeley DB]] Support

== Non-Multilib ==

If using internal Berkeley DB
wget http://download.oracle.com/berkeley-db/db-{{Berkeley DB-Version}}.tar.gz
tar -xf db-{{Berkeley DB-Version}}.tar.xz
ln -sv db-{{Berkeley DB-Version}} db

Compile the package:
{{Note|To use an external Berkeley DB append <nowiki>'--with-external-db'</nowiki> to the configuration.}}

CPPFLAGS="-I/usr/include/nspr -I/usr/include/nss" \
./configure --prefix=/usr --sysconfdir=/etc \
--libdir=/usr/lib --localstatedir=/var \
--without-lua

make

Install the package:

make install

== Multilib ==

=== 32Bit ===

To Do.

=== N32 ===

To Do.

=== 64Bit ===

To Do.

== Post Configuration ==
Initialise a empty RPM database with the following command:
rpmdb --initdb
[[Category:Package Management]]

RPM

2013-01-22T18:35:58Z

Cosmo: /* Non-Multilib */

RPM

2013-01-22T17:52:57Z

Cosmo: Created page with "This page is for RPM.ORG, for RPM5 view RPM5. {| style="text-align: left; background-color: AliceBlue;" |- !Download Source: |http://rpm.org/releases/rpm-{{RPM-Version}}...."

This page is for RPM.ORG, for RPM5 view [[RPM5]].

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://rpm.org/releases/rpm-{{RPM-Version}}.x/rpm-{{RPM-Version2}}.tar.bz2
|}

{{Package-Introduction|RPM is a command-line package management system capable of installing, uninstalling, verifying, querying, and updating Unix software packages.|http://rpm.org/}}

== Dependencies ==

=== Required ===
* [[NSPR]]
* [[NSS]]

=== Optional ===
* [[Lua]]
* [[NLS]]
* [[SELinux]]
* [[Doxygen]]

=== Not-Recommended ===
* External [[Berkeley DB]] Support

== Non-Multilib ==

If using internal Berkeley DB
wget http://download.oracle.com/berkeley-db/db-{{Berkeley DB-Version}}.tar.gz
tar -xf db-{{Berkeley DB-Version}}.tar.xz
ln -sv db-{{Berkeley DB-Version}} db

Compile the package:
{{Note|To use an external Berkeley DB append <nowiki>'--with-external-db'</nowiki> to the configuration.}}

CPPFLAGS="-I/usr/include/nspr -I/usr/include/nss" \
./configure --prefix=/usr --sysconfdir=/etc \
--libdir=/usr/lib --localstatedir=/var/lib \
--without-lua

make

Install the package:

make install

== Multilib ==

=== 32Bit ===

To Do.

=== N32 ===

To Do.

=== 64Bit ===

To Do.

[[Category:Package Management]]

Template:RPM-Version2

2013-01-22T17:43:25Z

Cosmo:

4.10.2

Template:RPM-Version2

2013-01-22T17:43:11Z

Cosmo: Created page with "2"

Template:RPM-Version

2013-01-22T17:42:54Z

Cosmo:

4.10

Template:RPM-Version

2013-01-22T17:41:59Z

Cosmo: Created page with "4.10.2"

4.10.2

Template:Berkeley DB-Version

2013-01-22T17:39:32Z

Cosmo:

5.3.21

Template:NSPR-Version

2013-01-22T17:05:05Z

Cosmo:

4.9.4

Template:SQLite3-Version

2013-01-17T18:20:21Z

Cosmo:

3071502

SQLite3

2013-01-17T18:15:20Z

Cosmo: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.sqlite.org/sqlite-autoconf-{{SQLite3-Version}}.tar.gz
|-
|}

----
{{Package-Introduction|SQLite is a software library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine.|http://www.sqlite.org/}}

== Dependencies ==

=== Optional ===
* [[TCL]]

{{ Note|<nowiki>Use CXXFLAGS="-g -O2 DSQLITE_TCL=1" to install tcl bindings.</nowiki>}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-threadsafe &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" ./configure --prefix=/usr --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|None
|-valign="top"
!Installed Programs:
|sqlite3
|-valign="top"
!Installed Libraries:
|libsqlite3.{a,la,so}
|}

[[Category:General Libs]]

SQLite3

2013-01-17T18:11:47Z

Cosmo:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.sqlite.org/sqlite-autoconf-{{SQLite3-Version}}.tar.gz
|-
|}

----
{{Package-Introduction|SQLite is a software library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine.|http://www.sqlite.org/}}

== Dependencies ==

=== Optional ===
* [[TCL]]

{{ Note|<nowiki>Use CFLAGS="-g -O2 DSQLITE_TCL=1" to install tcl bindings.</nowiki>}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-threadsafe &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" ./configure --prefix=/usr --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|None
|-valign="top"
!Installed Programs:
|sqlite3
|-valign="top"
!Installed Libraries:
|libsqlite3.{a,la,so}
|}

[[Category:General Libs]]

SQLite3

2013-01-17T18:09:54Z

Cosmo:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.sqlite.org/sqlite-autoconf-{{SQLite3-Version}}.tar.gz
|-
|}

----
{{Package-Introduction|SQLite is a software library that implements a self-contained, serverless, zero-configuration, transactional SQL database engine.|http://www.sqlite.org/}}

== Dependencies ==

=== Optional ===
* [[TCL]]

{{ Note|<nowiki>Use CFLAGS "-g -O2 DSQLITE_TCL 1" to install tcl bindings.</nowiki>}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-threadsafe &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" ./configure --prefix=/usr --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 --enable-threadsafe &&
make

Install the package

make install &&
unset USE_ARCH

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|None
|-valign="top"
!Installed Programs:
|sqlite3
|-valign="top"
!Installed Libraries:
|libsqlite3.{a,la,so}
|}

[[Category:General Libs]]

User talk:K2t0f12d

2012-12-28T09:49:16Z

Cosmo: Welcome!

'''Welcome to ''CBLFS''!'''
We hope you will contribute much and well.
You will probably want to read the [[Help:Contents|help pages]].
Again, welcome and have fun! [[User:Cosmo|Cosmo]] ([[User talk:Cosmo|talk]]) 01:49, 28 December 2012 (PST)

User:K2t0f12d

2012-12-28T09:49:15Z

Cosmo: Creating user page for new user.

Systemd

2012-04-22T13:52:11Z

Cosmo: Created page with "Systemd page."

Systemd page.

Template:Berkeley DB-Version

2011-09-12T19:10:44Z

Cosmo:

5.2.28

Template:Smartmontools-Version

2011-07-08T09:33:06Z

Cosmo:

5.41

Template:CMake-Version

2011-06-25T09:09:48Z

Cosmo:

{{CMake-Version2}}.4

Template:CMake-Version

2011-06-25T09:09:42Z

Cosmo:

{{CMake-Version2}}.

Creating a Ramdisk tmp

2011-01-26T15:40:50Z

Cosmo: /* Add the process to the bootscripts */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Patch:
| http://svn.cross-lfs.org/svn/repos/patches/mountfs/mountfs-0.1-RAMDISKTMP-2.patch
|}

This page will detail how to have /tmp and /var/tmp run under a mounted RAMDISK /dev/ram0. This is done for several reasons. First, if /tmp and /var/tmp are mounted under root /, they can cause large amounts of disk fragmentation due to the creation/deletion of a large amount of files. Second there is a noticeable performance gain, especially when dealing with large programs, (ie, KDE, gnome, OpenOffice, Etc) that use /tmp and /var/tmp to store/interact with information. I would not recommend this process for systems with a small amounts of ram.

=== Ensure kernel has Ramdisk Support ===

--- Block devices
<*> RAM block device support
(16) Default number of RAM disks
(4096) Default RAM disk size (kbytes)

=== Tell the kernel to make the Ramdisk at boot ===

You will need to edit which ever boot loader menu you have {IE:grub, lilo} and add ramdisk_size=56000 to the kernel boot parameters. It should resemble the following. This tells the kernel to create a ramdisk 56Mb in size.

title CLFS YOUR_VERSION
root (hdX,X)
kernel /boot/clfs_YOUR_KENREL root=/dev/{XXX} ramdisk_size=56000

=== Add the process to the bootscripts ===

cd /etc/rc.d/init.d/
patch -Np1 -i ~/mountfs-0.1-RAMDISKTMP-2.patch
ln -sf /tmp /var/tmp

=== Add /tmp and /var/tmp to /etc/fstab ===

Edit your /etc/fstab and add /tmp

/dev/ram0 /tmp ext2 defaults 0 0

Done, REBOOt, site back and Enjoy!

Template:Dhcpcd-Version

2010-10-15T10:15:23Z

Cosmo:

5.2.8

Dhcpcd

2010-10-15T10:15:01Z

Cosmo: Updated to version 5 as per svn (20100828) book

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://roy.marples.name/downloads/dhcpcd/dhcpcd-{{Dhcpcd-Version}}.tar.bz2
|}

----

{{Package-Introduction|A DHCP client|http://roy.marples.name/dhcpcd}}

== Dependencies ==

== Non-Multilib ==

Configure the package:

./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Configure the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

=== N32 ===

Configure the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

=== 64Bit ===

Configure the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

== Configuring ==

=== Network Service ===

Install the dhcpcd service included in the [[bootscripts]] package:

make install-service-dhcpcd

=== Example Configuration ===

cd /etc/sysconfig/network-devices &&
mkdir -v ifconfig.eth0 &&
cat > ifconfig.eth0/dhcpcd << "EOF"
ONBOOT="yes"
SERVICE="dhcpcd"

# Start Command for DHCPCD
DHCP_START="-q"

# Stop Command for DHCPCD
DHCP_STOP="-k"
EOF

[[Category:Network Utilities]]

Dhcpcd

2010-10-15T10:10:19Z

Cosmo: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://roy.marples.name/downloads/dhcpcd/dhcpcd-{{Dhcpcd-Version}}.tar.bz2
|}

----

{{Package-Introduction|A DHCP client|http://roy.marples.name/dhcpcd}}

== Dependencies ==

== Non-Multilib ==

Configure the package:

./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

make CC="gcc ${BUILD32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd

Install the package

make CC="gcc ${BUILD32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd install

=== N32 ===

Configure the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

=== 64Bit ===

Configure the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

== Configuring ==

=== Network Service ===

Install the dhcpcd service included in the [[bootscripts]] package:

make install-service-dhcpcd

=== Example Configuration ===

install -v -d /etc/sysconfig/network-devices/ifconfig.eth0 &&
cat > /etc/sysconfig/network-devices/ifconfig.eth0/dhcpcd << "EOF"
ONBOOT="yes"
SERVICE="dhcpcd"
DHCP_START=""
DHCP_STOP="-k"

# Set PRINTIP="yes" to have the script print
# the DHCP assigned IP address
PRINTIP="no"

# Set PRINTALL="yes" to print the DHCP assigned values for
# IP, SM, DG, and 1st NS. This requires PRINTIP="yes".
PRINTALL="no"
EOF

[[Category:Network Utilities]]

Dhcpcd

2010-10-15T10:09:30Z

Cosmo: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://roy.marples.name/downloads/dhcpcd/dhcpcd-{{Dhcpcd-Version}}.tar.bz2
|}

----

{{Package-Introduction|A DHCP client|http://roy.marples.name/dhcpcd}}

== Dependencies ==

== Non-Multilib ==

Configure the package:

./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

make CC="gcc ${BUILD32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd

Install the package

make CC="gcc ${BUILD32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd install

=== N32 ===

Compile the package:

make CC="gcc ${BUILDN32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd

Install the package

make CC="gcc ${BUILDN32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd install

=== 64Bit ===

Configure the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

== Configuring ==

=== Network Service ===

Install the dhcpcd service included in the [[bootscripts]] package:

make install-service-dhcpcd

=== Example Configuration ===

install -v -d /etc/sysconfig/network-devices/ifconfig.eth0 &&
cat > /etc/sysconfig/network-devices/ifconfig.eth0/dhcpcd << "EOF"
ONBOOT="yes"
SERVICE="dhcpcd"
DHCP_START=""
DHCP_STOP="-k"

# Set PRINTIP="yes" to have the script print
# the DHCP assigned IP address
PRINTIP="no"

# Set PRINTALL="yes" to print the DHCP assigned values for
# IP, SM, DG, and 1st NS. This requires PRINTIP="yes".
PRINTALL="no"
EOF

[[Category:Network Utilities]]

Dhcpcd

2010-10-15T10:08:14Z

Cosmo: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://roy.marples.name/downloads/dhcpcd/dhcpcd-{{Dhcpcd-Version}}.tar.bz2
|}

----

{{Package-Introduction|A DHCP client|http://roy.marples.name/dhcpcd}}

== Dependencies ==

== Non-Multilib ==

Configure the package:

./configure --prefix=/usr --sbindir=/sbin \
--sysconfdir=/etc --dbdir=/var/lib/dhcpcd --libexecdir=/usr/lib/dhcpcd

Compile the package:

make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

make CC="gcc ${BUILD32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd

Install the package

make CC="gcc ${BUILD32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd install

=== N32 ===

Compile the package:

make CC="gcc ${BUILDN32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd

Install the package

make CC="gcc ${BUILDN32}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd install

=== 64Bit ===

Compile the package:

make CC="gcc ${BUILD64}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd

Install the package

make CC="gcc ${BUILD64}" PREFIX=/usr BINDIR=/sbin SYSCONFDIR=/etc \
DBDIR=/var/lib/dhcpcd LIBEXECDIR=/usr/lib/dhcpcd install

== Configuring ==

=== Network Service ===

Install the dhcpcd service included in the [[bootscripts]] package:

make install-service-dhcpcd

=== Example Configuration ===

install -v -d /etc/sysconfig/network-devices/ifconfig.eth0 &&
cat > /etc/sysconfig/network-devices/ifconfig.eth0/dhcpcd << "EOF"
ONBOOT="yes"
SERVICE="dhcpcd"
DHCP_START=""
DHCP_STOP="-k"

# Set PRINTIP="yes" to have the script print
# the DHCP assigned IP address
PRINTIP="no"

# Set PRINTALL="yes" to print the DHCP assigned values for
# IP, SM, DG, and 1st NS. This requires PRINTIP="yes".
PRINTALL="no"
EOF

[[Category:Network Utilities]]

Traceroute

2010-08-28T14:20:39Z

Cosmo:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/traceroute/traceroute-{{Traceroute-Version}}.tar.gz
|}
{| style="text-align: left; background-color: AliceBlue;"
!Download Patch:
| http://cross-lfs.org/~cosmo/patches/traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
|}

----

{{Package-Introduction|The Traceroute package contains a program which is used to display the network route that packets take to reach a specified host. This is a standard network troubleshooting tool. If you find yourself unable to connect to another system, traceroute can help pinpoint the problem.}}

{{Note|The patch is only required if using Make 3.82 or newer.}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
make

Install the package

make prefix=/usr install

== Multilib ==

'''''This package does not provide any libraries so only one installation is needed.'''''
=== 32Bit ===

Compile the package:

traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
make CC="gcc ${BUILD32}"

Install the package

make prefix=/usr install

=== N32 ===

Compile the package:

traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
make CC="gcc ${BUILDN32}"

Install the package

make prefix=/usr install

=== 64Bit ===

Compile the package:

traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
make CC="gcc ${BUILD64}"

Install the package

make prefix=/usr install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| traceroute
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| None
|}

=== Short Descriptions ===

traceroute: does basically what it says: it traces the route your packets take from the host you are working on to another host on a network, showing all the intermediate hops (gateways) along the way.

[[Category:Network Applications]]

Template:Package-Introduction

2010-08-28T14:09:26Z

Cosmo: /* Introduction to {{PAGENAME}} */

== Introduction to {{PAGENAME}} ==

{{{1}}}

'''Project Homepage:''' {{{2|http://traceroute.sourceforge.net}}}

Traceroute

2010-08-28T14:01:32Z

Cosmo:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ftp.osuosl.org/pub/blfs/svn/t/traceroute-{{Traceroute-Version}}.tar.gz
|}
{| style="text-align: left; background-color: AliceBlue;"
!Download Patch:
| http://cross-lfs.org/~cosmo/patches/traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
|}

----

{{Package-Introduction|The Traceroute package contains a program which is used to display the network route that packets take to reach a specified host. This is a standard network troubleshooting tool. If you find yourself unable to connect to another system, traceroute can help pinpoint the problem.}}

{{Note|The patch is only required if using Make 3.82 or newer.}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
make

Install the package

make prefix=/usr install

== Multilib ==

'''''This package does not provide any libraries so only one installation is needed.'''''
=== 32Bit ===

Compile the package:

traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
make CC="gcc ${BUILD32}"

Install the package

make prefix=/usr install

=== N32 ===

Compile the package:

traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
make CC="gcc ${BUILDN32}"

Install the package

make prefix=/usr install

=== 64Bit ===

Compile the package:

traceroute-{{Traceroute-Version}}-defaults_fix-1.patch
make CC="gcc ${BUILD64}"

Install the package

make prefix=/usr install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| traceroute
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| None
|}

=== Short Descriptions ===

traceroute: does basically what it says: it traces the route your packets take from the host you are working on to another host on a network, showing all the intermediate hops (gateways) along the way.

[[Category:Network Applications]]

Template:Traceroute-Version

2010-08-28T13:55:17Z

Cosmo:

2.0.15

Template:GIT-Version

2010-08-08T19:44:12Z

Cosmo:

1.7.2.1

Logrotate

2010-05-13T16:17:21Z

Cosmo:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://cross-lfs.org/~cosmo/wiki_files/logrotate-{{Logrotate-Version}}.tar.gz
|}

----

{{Package-Introduction|Logrotate is a utility for automatically rotating log files. Logrotate use a configuration file to determine the conditions that must be satisfied to rotate a log file. Logrotate can be run manually, but would typically be run as a cron job.}}

== Dependencies ==
=== Required ===
* [[popt]]
=== Recommended ===
* [[Fcron]] or [[Vixie-Cron]]

== Non-Multilib ==

Compile the package:

make

Install the package:

make install

== Multilib ==
'''''This package does not install any libraries so only one installation is needed.'''''

=== 32bit ===

Compile the package:

make CC="gcc ${BUILD32}"

Install the package:

make install

=== N32 ===

Compile the package:

make CC="gcc ${BUILDN32}"

Install the package:

make install

=== 64bit ===

Compile the package:

make CC="gcc ${BUILD64}"

Install the package:

make install

== Configuring ==

Create the logrotate configuration file.

cat >> /etc/logrotate.conf << EOF
# Begin of /etc/logrotate.conf

# Rotate log files weekly.
weekly

# Send mail to no one.
nomail

# If the log file is empty, it do not rotate it.
notifempty

# Number of backups that will be kept.
# This will keep the 2 newest backups only.
rotate 2

# Create new empty files after rotating the old ones
# This will create empty log files, with owner
# set to root, group set to root, and permissions 644.
create 0664 root root

# Compress the backups with gzip.
compress

# RPM packages drop log rotation info in this directory.
# Uncomment if you use RPM packages.
# include /etc/logrotate.d

# End of /etc/logrotate.conf
EOF

Add each of the log files in /var/log to /etc/logrotate.conf to be rotated if they exceed 100K in size:

for logfile in $(find /var/log/*.log -type f); do
echo $logfile {>> /etc/logrotate.conf
echo # If the log file is larger than 100kb, rotate it >> /etc/logrotate.conf
echo size=100k >> /etc/logrotate.conf
echo } >> /etc/logrotate.conf
echo "">> /etc/logrotate.conf
done

=== Cron Job ===

Assuming you have Fcron installed, create a cron job:

cat >> /etc/fcrontab << EOF
0 12 * * * 0 /usr/sbin/logrotate /etc/logrotate.conf
EOF

== Contents ==

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|None
|-valign="top"
!Installed Programs:
|logrotate
|-valign="top"
!Installed Libraries:
|None
|-valign="top"
!Symlinks:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!logrotate
|is a utility that rotates and optionally compresses old log files.
|}

[[Category:General Utilities]]

HAL

2010-01-25T13:21:52Z

Cosmo: /* HAL Rules */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://hal.freedesktop.org/releases/hal-{{HAL-Version}}.tar.gz
|}

----

{{Package-Introduction|HAL is a hardware abstraction layer and aims to provide a live list of devices present in the system at any point in time. HAL tries to understand both physical devices (such as PCI, USB) and the device classes (such as input, net and block) physical devices have, and it allows merging of information from so called device info files specific to a device.

HAL provides a network API through D-BUS for querying devices and notifying when things change. Finally, HAL provides some monitoring (in an unintrusive way) of devices, presently ethernet link detection and volume mounts are monitored.|http://www.freedesktop.org/Software/hal/}}

{{Note|Hal uses now the bklib module which is provided by the util-linux-ng package.
You must build util-linux-ng with --with-fsprobe<nowiki>=</nowiki>builtin option and after build the e2fsprogs package with "--disable-libblkid", "--disable-libuuid" and "--disable-uuidd" options, since those libraries and the uuidd daemon have been moved to the util-linux-ng package.}}

== Dependencies ==

As of '''hal-0.5.8''' libvolume_id.so (From Udev) is a required dependency. On multilib systems you must have more than one copy of this library, (32bit,64bit,N32). Please refer to the [http://cross-lfs.org/view/svn/ clfs-svn] book for information on configuring a multilib udev. '''''WARNING: Installing a newer or older version of udev than what is currently installed on your system can cause problems booting because of the frequent changes in the rules format.''''' Please use the same version you currently have, or make the appropriate changes/upgrades to your rule set.

== Dependencies ==

=== Required ===
* [[D-BUS Glib]]
* [[Glib2]]
* [[Python]]
* [[Perl_Module_XML::Parser]]
=== Recommended ===
* [[Expat]]
* [[hal-info]]
* [[PCI Utilities]]
* [[libusb]]
* [[usbutils]]
* [[PolicyKit]] and [[ConsoleKit]]
=== Optional ===
* [[Parted]]
* [[dmidecode]]
* [[Acpid]]
* [[Doxygen]]
* [[DocBook Utils]]
* [[intltool]]
* [[Gtk-Doc]]
* [[pm-utils]]
* [[eject]]
* [[libsmbios]]

== HalDaemon User/Group ==

groupadd -g 19 haldaemon &&
useradd -c "HAL Daemon User" -d /dev/null \
-u 19 -g haldaemon -s /bin/false haldaemon

== Configuration Information ==

The following are some options you may wish to pass to HAL:

{|
|--enable-parted use [[Parted]]
|-
|--enable-policy-kit use [[PolicyKit]]
|-
|--enable-console-kit use [[ConsoleKit]]
|-
|--enable-acl-management use ACL management
|-
|--enable-umount-helper provide umount.hal helper
|}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc \
--libexecdir=/usr/lib/hal --localstatedir=/var \
--enable-policy-kit --enable-console-kit \
--enable-acl-management --enable-umount-helper \
--enable-parted &&
make

Install the package

make install &&
install -v -m755 -d /var/run/hald

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr --sysconfdir=/etc \
--libexecdir=/usr/lib/hal --localstatedir=/var \
--enable-policy-kit --enable-console-kit \
--enable-acl-management --enable-umount-helper \
--enable-parted &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib32 \
--libexecdir=/usr/lib/hal --localstatedir=/var \
--enable-policy-kit --enable-console-kit \
--enable-acl-management --enable-umount-helper \
--enable-parted &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib64 \
--libexecdir=/usr/lib/hal --localstatedir=/var \
--enable-policy-kit --enable-console-kit \
--enable-acl-management --enable-umount-helper \
--enable-parted &&
make

Install the package

make install &&
unset USE_ARCH &&
install -v -m755 -d /var/run/hald

== Configuration ==

This would be a good time to install the [[hal-info]] package.

=== Bootscript ===

Install the bootscript from the [[bootscripts]] package with the following command:

make install-haldaemon

=== HAL Rules ===

Download the example preferences.fdi file and install it in /etc/hal/fdi/policy.

wget http://cross-lfs.org/~cosmo/wiki_files/preferences.fdi
mv preferences.fdi /etc/hal/fdi/policy/

Edit this file to add rules. Use hal-device-manager to find key values for writing rules. For example, to prevent HAL from automounting every volume it finds, add lines similar to the following to your preferences.fdi. This example shows two methods of referencing a device, using the block.device key and using the info.udi key.

<nowiki><device>
<match key="block.device" string="/dev/hda1">
<merge key="volume.ignore" type="bool">true</merge>
</match>
</device>
<device>
<match key="info.udi" string="/org/freedesktop/Hal/devices/volume_uuid_c574fd03_c44f_4a97_85a5_06a112fb636a">
<merge key="volume.ignore" type="bool">true</merge>
</match>
</device></nowiki>

If you installed [[hal-info]], refer to the *.fdi files in /usr/share/hal/fdi/policy for rules that can be assigned to devices.

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| hal-device, hal-device-manager, hal-find-by-capability, hal-find-by-property, hal-get-property, hal-set-property, hald and lshal
|-valign="top"
! Installed Libraries:
| libhal.{so,a} and libhal-storage,{so,a}
|-valign="top"
! Installed Directories:
| /etc/hal, /usr/include/hal, /usr/lib/hal, /usr/share/doc/hal-{{HAL-Version}}, /usr/share/hal and /var/run/hald
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! hal-device
| is used to create, remove or show a HAL device.
|-valign="top"
! hal-device-manager
| shows a graphical representation of all the devices HAL is aware of. This program requires GNOME-Python. Here is a screenshot of hal-device-manager communicating with the HAL daemon and displaying a tree of device objects. The shown properties in the screenshot are for a device object representing a hard disk.
|-valign="top"
! hal-find-by-capability
| prints the Unique Device Identifiers for HAL device objects of a given capability.
|-valign="top"
! hal-find-by-property
| prints the Unique Device Identifiers for HAL device objects where a given property assumes a given value.
|-valign="top"
! hal-get-property
| retrieves a property from a device.
|-valign="top"
! hal-set-property
| attempts to set property for a device. Note that, due to security considerations, it may not be possible to set a property.
|-valign="top"
! hald
| is the HAL daemon program.
|-valign="top"
! lshal
| shows all devices and their properties. If the --monitor option is given then the device list and all devices are monitored for changes.
|-valign="top"
! libhal.{so,a}
| contains the API functions required by the HAL programs.
|-valign="top"
! libhal-storage.{so,a}
| contains the API functions required by the HAL storage and volume utility programs.
|}

[[Category:General Utilities]]

HAL

2010-01-25T01:25:29Z

Cosmo: /* HAL Rules */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://hal.freedesktop.org/releases/hal-{{HAL-Version}}.tar.gz
|}

----

{{Package-Introduction|HAL is a hardware abstraction layer and aims to provide a live list of devices present in the system at any point in time. HAL tries to understand both physical devices (such as PCI, USB) and the device classes (such as input, net and block) physical devices have, and it allows merging of information from so called device info files specific to a device.

HAL provides a network API through D-BUS for querying devices and notifying when things change. Finally, HAL provides some monitoring (in an unintrusive way) of devices, presently ethernet link detection and volume mounts are monitored.|http://www.freedesktop.org/Software/hal/}}

{{Note|Hal uses now the bklib module which is provided by the util-linux-ng package.
You must build util-linux-ng with --with-fsprobe<nowiki>=</nowiki>builtin option and after build the e2fsprogs package with "--disable-libblkid", "--disable-libuuid" and "--disable-uuidd" options, since those libraries and the uuidd daemon have been moved to the util-linux-ng package.}}

== Dependencies ==

As of '''hal-0.5.8''' libvolume_id.so (From Udev) is a required dependency. On multilib systems you must have more than one copy of this library, (32bit,64bit,N32). Please refer to the [http://cross-lfs.org/view/svn/ clfs-svn] book for information on configuring a multilib udev. '''''WARNING: Installing a newer or older version of udev than what is currently installed on your system can cause problems booting because of the frequent changes in the rules format.''''' Please use the same version you currently have, or make the appropriate changes/upgrades to your rule set.

== Dependencies ==

=== Required ===
* [[D-BUS Glib]]
* [[Glib2]]
* [[Python]]
* [[Perl_Module_XML::Parser]]
=== Recommended ===
* [[Expat]]
* [[hal-info]]
* [[PCI Utilities]]
* [[libusb]]
* [[usbutils]]
* [[PolicyKit]] and [[ConsoleKit]]
=== Optional ===
* [[Parted]]
* [[dmidecode]]
* [[Acpid]]
* [[Doxygen]]
* [[DocBook Utils]]
* [[intltool]]
* [[Gtk-Doc]]
* [[pm-utils]]
* [[eject]]
* [[libsmbios]]

== HalDaemon User/Group ==

groupadd -g 19 haldaemon &&
useradd -c "HAL Daemon User" -d /dev/null \
-u 19 -g haldaemon -s /bin/false haldaemon

== Configuration Information ==

The following are some options you may wish to pass to HAL:

{|
|--enable-parted use [[Parted]]
|-
|--enable-policy-kit use [[PolicyKit]]
|-
|--enable-console-kit use [[ConsoleKit]]
|-
|--enable-acl-management use ACL management
|-
|--enable-umount-helper provide umount.hal helper
|}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc \
--libexecdir=/usr/lib/hal --localstatedir=/var \
--enable-policy-kit --enable-console-kit \
--enable-acl-management --enable-umount-helper \
--enable-parted &&
make

Install the package

make install &&
install -v -m755 -d /var/run/hald

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr --sysconfdir=/etc \
--libexecdir=/usr/lib/hal --localstatedir=/var \
--enable-policy-kit --enable-console-kit \
--enable-acl-management --enable-umount-helper \
--enable-parted &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib32 \
--libexecdir=/usr/lib/hal --localstatedir=/var \
--enable-policy-kit --enable-console-kit \
--enable-acl-management --enable-umount-helper \
--enable-parted &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib64 \
--libexecdir=/usr/lib/hal --localstatedir=/var \
--enable-policy-kit --enable-console-kit \
--enable-acl-management --enable-umount-helper \
--enable-parted &&
make

Install the package

make install &&
unset USE_ARCH &&
install -v -m755 -d /var/run/hald

== Configuration ==

This would be a good time to install the [[hal-info]] package.

=== Bootscript ===

Install the bootscript from the [[bootscripts]] package with the following command:

make install-haldaemon

=== HAL Rules ===

Download the example preferences.fdi file and install it in /etc/hal/fdi/policy.

wget http://cross-lfs.org/~cosmo/preferences.fdi
mv preferences.fdi /etc/hal/fdi/policy/

Edit this file to add rules. Use hal-device-manager to find key values for writing rules. For example, to prevent HAL from automounting every volume it finds, add lines similar to the following to your preferences.fdi. This example shows two methods of referencing a device, using the block.device key and using the info.udi key.

<nowiki><device>
<match key="block.device" string="/dev/hda1">
<merge key="volume.ignore" type="bool">true</merge>
</match>
</device>
<device>
<match key="info.udi" string="/org/freedesktop/Hal/devices/volume_uuid_c574fd03_c44f_4a97_85a5_06a112fb636a">
<merge key="volume.ignore" type="bool">true</merge>
</match>
</device></nowiki>

If you installed [[hal-info]], refer to the *.fdi files in /usr/share/hal/fdi/policy for rules that can be assigned to devices.

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| hal-device, hal-device-manager, hal-find-by-capability, hal-find-by-property, hal-get-property, hal-set-property, hald and lshal
|-valign="top"
! Installed Libraries:
| libhal.{so,a} and libhal-storage,{so,a}
|-valign="top"
! Installed Directories:
| /etc/hal, /usr/include/hal, /usr/lib/hal, /usr/share/doc/hal-{{HAL-Version}}, /usr/share/hal and /var/run/hald
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! hal-device
| is used to create, remove or show a HAL device.
|-valign="top"
! hal-device-manager
| shows a graphical representation of all the devices HAL is aware of. This program requires GNOME-Python. Here is a screenshot of hal-device-manager communicating with the HAL daemon and displaying a tree of device objects. The shown properties in the screenshot are for a device object representing a hard disk.
|-valign="top"
! hal-find-by-capability
| prints the Unique Device Identifiers for HAL device objects of a given capability.
|-valign="top"
! hal-find-by-property
| prints the Unique Device Identifiers for HAL device objects where a given property assumes a given value.
|-valign="top"
! hal-get-property
| retrieves a property from a device.
|-valign="top"
! hal-set-property
| attempts to set property for a device. Note that, due to security considerations, it may not be possible to set a property.
|-valign="top"
! hald
| is the HAL daemon program.
|-valign="top"
! lshal
| shows all devices and their properties. If the --monitor option is given then the device list and all devices are monitored for changes.
|-valign="top"
! libhal.{so,a}
| contains the API functions required by the HAL programs.
|-valign="top"
! libhal-storage.{so,a}
| contains the API functions required by the HAL storage and volume utility programs.
|}

[[Category:General Utilities]]

Apcupsd

2009-03-25T19:00:57Z

Cosmo: Added homepage

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/apcupsd/apcupsd-{{Apcupsd-Version}}.tar.gz
|}

----

{{Package-Introduction|Apcupsd is a deamon that talks with APC ups and monitors it's status. There are alot of devices that it will work with one should read up on it.|http://www.apcupsd.org/}}

== Dependencies ==

=== Optional ===
* [[TCP Wrappers]]
* [[GD]]
* [[libusb]]
* [[Gtk2]] and [[GConf]] (Required to build gapcmon)

== Configuration Information ==

MANUAL: http://www.apcupsd.org/manual/index.html

--enable-usb: Turns on generation of the USB driver code.

--with-upstype=<YOUR_UPS>: This option allows you to specify the type of UPS that will be connected to your computer

--with-upscable=<YOUR_CABLE>: This option allows you to specify what cable you are using to connect to the UPS

--enable-cgi: Enables the building of the CGI programs that permit Web browser access to apcupsd data

--with-cgi-bin=<CGI_DIR>: Points to your CGI dir

--enable-gapcmon: A Gtk2/GLib2 GUI application used to monitor UPS devices controlled by the APCUPSD package.

--enable-powerflute: Is a ncurses based program to monitor the UPS.

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --with-log-dir=/var/log \
--enable-usb --with-upstype=usb --with-upscable=usb \
--enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
--enable-gapcmon --enable-powerflute &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" USE_ARCH=32 \
./configure --prefix=/usr --with-log-dir=/var/log \
--enable-usb --with-upstype=usb --with-upscable=usb \
--enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
--enable-gapcmon --enable-powerflute &&
make

Install the package:

make install

=== N32 ===

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" USE_ARCH=n32 \
./configure --prefix=/usr --with-log-dir=/var/log \
--enable-usb --with-upstype=usb --with-upscable=usb \
--enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
--enable-gapcmon --enable-powerflute &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" USE_ARCH=64 \
./configure --prefix=/usr --with-log-dir=/var/log \
--enable-usb --with-upstype=usb --with-upscable=usb \
--enable-cgi --with-cgi-bin=/srv/www/cgi-bin \
--enable-gapcmon --enable-powerflute &&
make

Install the package:

make install

== Configuring ==

=== BootScript ===

Create the bootscript:

cat > /etc/rc.d/init.d/apcupsd << "EOF"
#!/bin/sh
# Begin $rc_base/init.d/apcupsd

# Based on sysklogd script from LFS-3.1 and earlier.
# Rewritten by zippo zippo@oppiz.net

#$LastChangedBy: oppiz
#$Date: 2007-02-15 00:13:00Hrs

. /etc/sysconfig/rc
. $rc_functions

case "$1" in
start)
boot_mesg "Starting Apcupsd Server..."
loadproc /sbin/apcupsd
sleep 1
;;

stop)
boot_mesg "Stopping Apcupsd Server..."
killproc /sbin/apcupsd
;;

reload)
boot_mesg "Reloading Apcupsd Server..."
reloadproc /sbin/apcupsd
;;

restart)
$0 stop
sleep 1
$0 start
;;

status)
statusproc /sbin/apcupsd
;;

*)
echo "Usage: $0 {start|stop|reload|restart|status}"
exit 1
;;
esac

# End $rc_base/init.d/apcupsd
EOF
chmod -v 754 /etc/rc.d/init.d/apcupsd

Link it into the runlevels:

for link in /etc/rc.d/rc{{0,1,6}.d/K50,{2,3,4,5}.d/S15}apcupsd; do
ln -sfv ../init.d/apcupsd $link;
done

[[Category:Power Management]]

Template:Package-Introduction

2009-03-25T17:24:31Z

Cosmo: Undo revision 17837 by Cosmo (Talk)

== Introduction to {{PAGENAME}} ==

{{{1}}}

'''Project Homepage:''' {{{2|Unknown}}}

Template:Package-Introduction

2009-03-25T17:22:58Z

Cosmo: /* Introduction to {{PAGENAME}} */

== Introduction to {{PAGENAME}} ==

{{{1}}}

'''Project Homepage:''' {{{2|http://www.apcupsd.org/}}}

Main Page

2008-10-23T23:27:24Z

Cosmo: /* General Libraries */

Welcome to Community Driven BLFS.

== NOTICE ==

'''Please don't add information from BLFS without acknowledging the source. BLFS is copyrighted but copying is allowed with attribution.'''

When adding packages please add a CONTENT section so everyone knows what the package does. Thank you. You can find a script [[User:Weibullguy|here]] that can be used to make this task reasonably pain free. The script even formats the output so a simple copy and paste is all you need to do (in most cases).

If you have problems building any packages in CBLFS and are unable to find the solution yourself, please do not use the "Talk" section associated with the package. You will receive no help, but your entry will be deleted. Most of the CLFS and CBLFS developers and users hang out at chat.freenode.net in the #cross-lfs channel. Your odds of receiving help dramatically improve if you stop by #cross-lfs or post on the mailing list.

== What is Community Driven BLFS ==

Community Driven BLFS (CBLFS) is an open project that takes over after you have completed a Cross-LFS based build. While there's a veritable [[Who's Who]] of CBLFS, as the name implies anyone in the community may contribute. Your contributions are welcome; from multilib build instructions for Open Office to spelling and grammar corrections. You can find a list of packages that are referenced but still need build instructions in the [http://cblfs.cross-lfs.org/index.php/Special:Wantedpages Wanted Pages] if you don't have anything particular in mind.

There are only three requirements and one strong suggestion for contributing to CBLFS. First, read and heed the applicable portions of the '''NOTICE''' section above. Second, please follow the page format that is set. There is a link to the page template below. Explanatory comments are in bold green text and should, obviously, be removed. Always check the template as changes ''are'' made periodically.

Third, upload patches in accordance with the instructions below. These instructions will help you create and format the file before uploading. Please don't provide links to patches or other files stored on your personal server.

Finally, there are many good open-source spell checking applications. In fact, there are build instructions for [[Aspell]] in this wiki. Please install and use a spell checker when contributing.

* [[Page_Template|Page Template]]
* [[How to upload patches]]
* [[License]]

In addition to this Wiki, you may also be interested in visting the [http://hints.cross-lfs.org/index.php/Main_Page CLFS-Hints Wiki].

== Post CLFS Configuration ==
* [[Bash Startup Files]]
* [[System User and Groups]]
* [[Configuring for Adding Users]]
* [[Creating an Initramfs]]

= Packages in the Wiki =

== [[:Category:Security|Security]] ==
<dpl>category=Security</dpl>

== [[:Category:Block Device|Block Device]] ==
<dpl>category=Block Device</dpl>

== [[:Category:File System|File System]] ==
<dpl>category=File System</dpl>

== [[:Category:Hardware Monitoring|Hardware Monitoring]] ==
<dpl>category=Hardware Monitoring</dpl>

== [[:Category:Text Editors|Text Editors]] ==
<dpl>category=Text Editors</dpl>

== General Libraries ==
* [[Acl]]
* [[Aspell]]
* [[Hspell]]
* [[Attr]]
* [[Beecrypt]]
* [[c-ares]]
* [[CHMlib]]
* [[CLucene]]
* [[cpufrequtils]]
* [[Dante]]
* [[DBH]]
* [[Dynamite]]
* [[Eventlog]]
* [[Exempi]]
* [[Expat]]
* [[Fam]]
* [[Gamin]]
* [[GDBM]]
* [[Glib1]]
* [[Glib2]]
* [[Glibmm]]
* [[GMime]]
* [[GnuTLS]]
* [[GOB2]]
* [[GtkUnique]]
* [[gwenhywfar]]
* [[libarchive]]
* [[libassuan]]
* [[libavc1394]]
* [[libcap]]
* [[Libcfg]]
* [[libchipcard]]
* [[libcroco]]
* [[libdbi]]
* [[libdbi-drivers]]
* [[libdc1394]]
* [[libebml]]
* [[libevent]]
* [[libextractor]]
* [[libgalago]]
* [[LibGCrypt]]
* [[Libggz]]
* [[LibGPG-Error]]
* [[Libgpod]]
* [[libiec61883]]
* [[libieee1284]]
* [[libipoddevice]]
* [[libksba]]
* [[libdaemon]]
* [[libgssapi]]
* [[libgssglue]]
* [[libgsf]]
* [[libgtkhtml]]
* [[libidn]]
* [[libical]]
* [[LibIDL]]
* [[libmal]]
* [[libmcrypt]]
* [[libmspack]]
* [[libnfsidmap]]
* [[liboil]]
* [[libpqxx]]
* [[libptp2]]
* [[libraw1394]]
* [[librpcsecgss]]
* [[Libsigc++]]
* [[libssh2]]
* [[libstroke]]
* [[libsynce]]
* [[LibtASN1]]
* [[libusb]]
* [[libwpd]]
* [[libxml++]]
* [[LibXML2]]
* [[LibXSLT]]
* [[LZO]]
* [[LZO2]]
* [[Meanwhile]]
* [[MIT krb5]] | [[Heimdal]]
* [[OpenCDK]]
* [[Ortp]]
* [[Pcre]]
* [[Popt]]
* [[PhysicsFS]]
* [[S-Lang]]
* [[SQLite]]
* [[SQLite3]]
* [[t1lib]]
* [[TCL]]
* [[TCP Wrappers]]
* [[Unshield]]
* [[Wv]]
* [[Wv2]]
* [[Xerces-C++]]
* [[Xalan-C++]]

== Graphics and Font Libraries ==
* [[AAlib]]
* [[Dcraw]]
* [[Exiv2]]
* [[FLTK]]
* [[FreeGLUT]]
* [[FreeType]]
* [[FriBidi]]
* [[FontConfig]]
* [[GD]]
* [[GifLib]]
* [[glitz]]
* [[GtkSpell]]
* [[IlmBase]]
* [[Imlib]]
* [[Imlib2]]
* [[JasPer]]
* [[JBIG-Kit]]
* [[kipi-plugins]]
* [[KSquirrel-libs]]
* [[libart_lgpl]]
* [[libexif]]
* [[libexif-gtk]]
* [[libjpeg]]
* [[libkdcraw]]
* [[libkexif]]
* [[libkexiv2]]
* [[libkipi]]
* [[libwmf]]
* [[libmng]]
* [[libpng]]
* [[librsvg]]
* [[LibTIFF]]
* [[little cms]]
* [[Netpbm]]
* [[OpenEXR]]
* [[PLIB]]
* [[Tk]]
* [[UFRaw]]
* [[VTK]]

== General Utilities ==
* [[Acpid]]
* [[afio]]
* [[bash-completion]]
* [[bash-completion-config]]
* [[Bc]]
* [[boost]]
* [[cabextract]]
* [[ConsoleKit]]
* [[Console-tools]]
* [[cpio]]
* [[D-BUS]]
* [[Desktop-file-utils]]
* [[Dialog]]
* [[eject]]
* [[emelFM2]]
* [[Fcron]]
* [[FontForge]]
* [[FUSE]]
* [[gcolor2]]
* [[gnokii]]
* [[GNU Pth]]
* [[GParted]]
* [[GPM]]
* [[Gtk-Doc]]
* [[HAL]]
* [[hal-info]]
* [[hdparm]]
* [[Hyperestraier]]
* [[hwinfo]]
* [[initng]]
* [[initng-conf-gtk]]
* [[Intltool]]
* [[iso-codes]]
* [[logrotate]]
* [[Lomoco]]
* [[mc]]
* [[Orange]]
* [[Parted]]
* [[PCI Utilities]]
* [[Pilot-Link]]
* [[pinentry]]
* [[pkg-config]]
* [[pmount]]
* [[PodSleuth]]
* [[PolicyKit]]
* [[QDBM]]
* [[rkhunter]]
* [[rpm2cpio]]
* [[rpm2targz]]
* [[Screen]]
* [[ScrollKeeper]]
* [[sdparm]]
* [[sg3_utils]]
* [[Sharutils]]
* [[Star]]
* [[Strigi]]
* [[Syslog-ng]]
* [[Sysfsutils]]
* [[Tidy]]
* [[unifdef]]
* [[UnixODBC]]
* [[unrar]]
* [[Unzip]]
* [[usbutils]]
* [[Vixie-Cron]]
* [[Wget]]
* [[Which]]
* [[xdelta]]
* [[xmlto]]
* [[Zip]]

== Programming ==
* [[ACPICA]]
* [[Apache Ant]]
* [[APR]]
* [[APR-util]]
* [[Autogen]]
* [[BJam]]
* [[ccache]]
* [[Check]]
* [[Chicken]]
* [[CMake]]
* [[CppUnit]]
* [[ctags]]
* [[DDD]]
* [[DejaGnu]]
* [[Dev86]]
* [[DevHelp]]
* [[Distcc]]
* [[Doxygen]]
* [[Expect]]
* [[gc]]
* [[GCC]]
* [[GCC-3.3]] (libstdc++.so.5)
* [[GCL]]
* [[GDB]]
* [[GDL]]
* [[Geany]]
* [[Kommander]]
* [[libfc]]
* [[libgda]]
* [[libglade]]
* [[libglademm]]
* [[Gengetopt]]
* [[Glade2]]
* [[Glade3]]
* [[GMP]]
* [[Gperf]]
* [[Graphviz]]
* [[Guile]]
* [[Guile-GTK]]
* [[iiview]]
* [[Jam]]
* [[JDK]]
* [[Log4cxx]]
* [[Lua]]
* [[MPFR]]
* [[NASM]]
* [[Objective Caml]]
* [[OpenJDK]]
* [[Perl Modules]]
* [[PHP]]
* [[Python]]
* [[Python Modules]]
* [[RLog]]
* [[Ruby]]
* [[SWIG]]
* [[smake]]
* [[Strace]]
* [[Valgrind]]
* [[XPontus]]
* [[Yasm]]

== C# ==
* [[Evolution-Sharp]]
* [[Galago-Sharp]]
* [[Gnome-Sharp]]
* [[Gsf-Sharp]]
* [[Gtk-Sharp]]
* [[libgdiplus]]
* [[Mono]]
* [[Mono-Addins]]
* [[Monodoc]]

== [[:Category:Source Code Management|Source Code Management]] ==
<dpl>category=Source Code Management</dpl>

== Networking ==
* [[aria2]]
* [[arno-iptables-firewall]]
* [[Avahi]]
* [[BIND]]
* [[BIND Utilities]]
* [[bluez]]
* [[bluez-libs]]
* [[bluez-utils]]
* [[Dhcpcd]]
* [[Curl]]
* [[curlftpfs]]
* [[FreeNX]]
* [[ifplugd]]
* [[iptables]]
* [[libbtctl]]
* [[libpcap]]
* [[imap c-client]]
* [[mDNSResponder]]
* [[minicom]]
* [[Netplug]]
* [[NetTools]]
* [[OpenOBEX]]
* [[OpenSLP]]
* [[PPP]]
* [[SSHFS]]
* [[SWAT]]
* [[Wireless tools]]
* [[WPA Supplicant]]
* [[Xinetd]]

== Network Drivers ==
* [[MadWifi]]
* [[NdisWrapper]]
* [[BroadCom]] (BCM4311 BCM4312 BCM4321 BCM4322)

== Networking Libraries ==
* [[libdownload]]
* [[libnl]]
* [[librsync]]
* [[libsoup]]
* [[neon]]

== Network Applications ==
* [[bridge-utils]]
* [[Dhcdbd]]
* [[dvb-apps]]
* [[netcat]]
* [[net-Snmp]]
* [[netstat]]
* [[NetworkManager]]
* [[Nmap]]
* [[NTP]]
* [[OpenVPN]]
* [[Portmap]]
* [[qca2]]
* [[rdesktop]]
* [[RRDTool]]
* [[socat]]
* [[TCPDump]]
* [[Traceroute]]
* [[TSClient]]
* [[Whois]]
* [[Wireshark]]

== Web Browser/Mail/News/Chat/P2P/FTP Clients ==
* [[Ekiga]]
* [[Fetchmail]]
* [[gFTP]]
* [[irssi]]
* [[Kermit]]
* [[Links]]
* [[Lynx]]
* [[microdc2]]
* [[Mutt]]
* [[Postfix]]
* [[Procmail]]
* [[Sim]]
* [[sSMTP]]
* [[Trix]]
* [[weechat]]

== Servers ==
* [[Apache]]
* [[Berkeley DB]]
* [[Courier-Authlib]]
* [[Courier-IMAP]]
* [[Dhcp]]
* [[Exim]]
* [[MySQL]]
* [[nginx]]
* [[NFS Utilities]]
* [[OpenLDAP]]
* [[OpenSSH]]
* [[PostgreSQL]]
* [[ProFTPD]]
* [[Qmail]]
* [[Rarpd]]
* [[Rsnapshot]]
* [[Rsync]]
* [[Samba]]
* [[Sendmail]]
* [[Squid]]
* [[Squirrelmail]]
* [[tftp-hpa]]
* [[Vsftpd]]

== [[:Category:Shells|Shells]] ==
<dpl>category=Shells</dpl>

== [[:Category:Power Management|Power Management]] ==
<dpl>category=Power Management</dpl>

== X ([[X Window System]]) ==
* [[Xorg6]]
* [[Xorg7/Intro|Xorg7]]

== X Libraries ==
* [[ATK]]
* [[Beagle]]
* [[Cairo]]
* [[Cairomm]]
* [[DjVuLibre]]
* [[goffice]]
* [[Gtk1]]
* [[Gtk2]]
* [[Gtk+-Extras]]
* [[Gtkmm]]
* [[Gtk-Qt-Engine]]
* [[Gtk-vnc]]
* [[hicolor-icon-theme]]
* [[icon-naming-utils]]
* [[LessTif]]
* [[libcm]]
* [[libnotify]]
* [[libsexy]]
* [[libwnck]]
* [[libxklavier]]
* [[notification-daemon]]
* [[Pango]]
* [[Poppler]]
* [[Qt3]]
* [[Qt4]]
* [[Shared-MIME-Info]]
* [[startup-notification]]
* [[Tapioca-qt]]
* [[Telepathy-qt]]
* [[Tracker]]
* [[wxWidgets]]
* [[Xaw3d]]
* [[XCB]]

== Desktops/Window Managers ==
* [[AfterStep]]
* [[Blackbox]]
* [[Compiz Fusion]]
* [[dr17]]
* [[Fluxbox]]
* [[Fvwm]]
* [[Gnome]]
* [[Icewm]]
* [[iDesk]]
* [[KDE]]
* [[KDE4]]
* [[Metacity]]
* [[ratpoison]]
* [[vtwm]]
* [[Xfce]]
* [[Lxde]]

== X Window Applications ==
* [[3DDesktop]]
* [[aDesklets]]
* [[Avant Window Navigator]]
* [[Beryl]]
* [[Conky]]
* [[Gkrellm]]
* [[Krusader]]
* [[KXDocker]]
* [[Pdfedit]]
* [[QuickSynergy]]
* [[Slim]]
* [[Synergy2]]
* [[XDaliClock]]
* [[Xpdf]]
* [[XScreenSaver]]
* [[Yakuake]]

== X Web Browser/Mail/News/Chat/P2P Clients ==
* [[aMule]]
* [[Evolution]]
* [[Firefox]]
* [[Gtk-Gnutella]]
* [[Ktorrent]]
* [[Ktorrent-KDE4]]
* [[Linuxdcpp]]
* [[Mldonkey]]
* [[Mozilla]]
* [[Pidgin]]
* [[Rtorrent]]
* [[SeaMonkey]]
* [[Sylpheed]]
* [[Thunderbird]]
* [[Xchat]]

== Media and Libraries ==
* [[ALSA]]
* [[ALUT]]
* [[Audio File]]
* [[DivX4Linux]]
* [[EsounD]]
* [[eSpeak]]
* [[FAAC]]
* [[FAAD2]]
* [[FLAC]]
* [[Gpac]]
* [[GStreamer]]
* [[Id3lib]]
* [[libburn]]
* [[Liba52]]
* [[Libao]]
* [[libcaca]]
* [[libcddb]]
* [[libcdio]]
* [[Libdv]]
* [[libdvbpsi]]
* [[libdvdcss]]
* [[libdvdnav]]
* [[Libdvdread]]
* [[libFAME]]
* [[libid3]]
* [[libid3tag]]
* [[libisofs]]
* [[libogg]]
* [[libopendaap]]
* [[libvorbis]]
* [[libmad]]
* [[libmatroska]]
* [[libmikmod]]
* [[libmodplug]]
* [[libmpd]]
* [[libmpeg2]]
* [[LibMPEG3]]
* [[libmtp]]
* [[libMusicBrainz]]
* [[libnjb]]
* [[libofa]]
* [[Secret Rabbit Code | libsamplerate]]
* [[libvisual]]
* [[libvisual-plugins]]
* [[libquicktime]]
* [[libshout]]
* [[libsndfile]]
* [[live555]]
* [[MedCon]]
* [[MPD]]
* [[MPEG4IP]]
* [[Musepack]]
* [[NAS]]
* [[opal]]
* [[OpenAL]]
* [[PortAudio]]
* [[PulseAudio]]
* [[pwlib]]
* [[SDL]]
* [[GUIlib]]
* [[SDL_gfx]]
* [[SDL_image]]
* [[SDL_net]]
* [[SDL_mixer]]
* [[SDL_sound]]
* [[SDL_ttf]]
* [[Secret Rabbit Code]]
* [[SMPEG]]
* [[Speex]]
* [[Swfdec]]
* [[TagLib]]
* [[Theora]]
* [[TunePimp]]
* [[TwoLAME]]
* [[vec2web]]
* [[x264]]
* [[Xine Libraries]]
* [[XviD]]
* [[xvid4conf]]

== Media Utilities ==
* [[Amarok]]
* [[Asunder]]
* [[Audacious]]
* [[audacious-plugins]]
* [[Avifile]]
* [[Banshee]]
* [[Bonk]]
* [[CDParanoia-III]]
* [[FFmpeg]]
* [[gimmix]]
* [[Gnomad2]]
* [[Grip]]
* [[gxine]]
* [[gnash]]
* [[iTouch-Control]]
* [[Kaffeine]]
* [[LAME]]
* [[LiVES]]
* [[MJPEG Tools]]
* [[Mpg123]]
* [[MPlayer]]
* [[MPlayerplug-in]]
* [[Normalize]]
* [[Ogle]]
* [[RipperX]]
* [[Seom]]
* [[shntool]]
* [[soundkonverter]]
* [[SoX]]
* [[Tagtool]]
* [[Timidity]]
* [[Transcode]]
* [[vcdimager]]
* [[vlc]]
* [[Vorbis Tools]]
* [[XMMS]]

== TV tuner/Radio playing and recording ==
* [[ivtv]]
* [[lirc]]
* [[MythTV]]

== Graphics Editing/Viewing ==
* [[Ghostview]]
* [[GIMP]]
* [[Gimp-Print]]
* [[Gqview]]
* [[GraphicsMagick]]
* [[ImageMagick]]
* [[Inkscape]]
* [[KSquirrel]]
* [[POV-Ray]]
* [[sodipodi]]

== Printing ==
* [[CUPS]]
* [[Ghostscript]]
* [[Foomatic]]
* [[libpaper]]
* [[LPRng]]
* [[IJS]]
* [[hplip]]

== [[:Category:PostScript|PostScript]] ==
<dpl>category=PostScript</dpl>

== [[:Category:Scanning|Scanning]] ==
<dpl>category=Scanning</dpl>

== [[:Category:Cameras|Cameras]] ==
<dpl>category=Cameras</dpl>

== CD/DVD-Writing Utilities ==
* [[Cdrtools]]
* [[Cdrdao]]
* [[Cdrkit]]
* [[Daa2iso]]
* [[DVDAuthor]]
* [[DVDAuthorWizard]]
* [[dvd+rw-tools]]
* [[dvd-slideshow]]
* [[Graveman!]]
* [[K3b]]
* [[kmediafactory]]
* [[Uif2iso]]
* [[XcdRoast]]

== [[:Category:Emulators|Emulators]] ==
<dpl>category=Emulators</dpl>

== DocBook ==
* [[DocBook SGML]]
* [[DocBook XML]]

== Type Setting ==
* [[teTeX]]
* [[JadeTeX]]

== Games ==
* [[AstroMenace|AstroMenace (Closed-Source)]]
* [[FlightGear]]
* [[Freeciv]]
* [[Ggz client libs]]
* [[libggz]]
* [[Lincity-ng]]
* [[SimGear]]
* [[TORCS]]

== [[:Category:Science_Engineering|Science/Engineering/Mathematics]] ==
<dpl>category=Science_Engineering</dpl>

== [[:Category:Clusters_Grids|Clusters, Grids, and Parallel Programming]] ==
<dpl>category=Clusters_Grids</dpl>

== [[:Category:Financial|Financial Libraries and Utilities]] ==
<dpl>category=Financial</dpl>

== [[:Category:Office_Suites|Office Suites and Productivity]] ==
<dpl>category=Office_Suites</dpl>

== Drivers ==
=== Input ===
* [[Synaptics]]
* [[Wacom|Wacom graphic tablet drivers]]

=== Video ===
* [[NVIDIA|NVIDIA Graphics Driver]]

=== Printers ===
* [[hplip]] (HJP drivers for inkjet, laser and More!)
* [[Samsung]] (ML series and some xeon lasers)

== Closed-Source Applications and Plugins ==
* [[Adobe Reader]]
* [[Flash Player]]
* [[Lightscribe]]
* [[Opera]]
* [[RealPlayer]]

== [[:Category:Benchmarking|Benchmarking]] ==
<dpl>category=Benchmarking</dpl>

== [[:Category:Package Management|Package Management]] ==
<dpl>category=Package Management</dpl>

Beecrypt

2008-10-11T19:54:50Z

Cosmo: New page: {| style="text-align: left; background-color: AliceBlue;" |- !Download Source: | http://downloads.sourceforge.net/beecrypt/beecrypt-4.1.2.tar.gz?modtime=1103703200&big_mirror=0 |- |} ----...

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/beecrypt/beecrypt-4.1.2.tar.gz?modtime=1103703200&big_mirror=0
|-
|}

----

{{Package-Introduction|BeeCrypt is an ongoing project to provide a strong and fast cryptography toolkit. Includes entropy sources, random generators, block ciphers, hash functions, message authentication codes, multiprecision integer routines, and public key primitives.|http://beecrypt.sourceforge.net/}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

'''''I do not have a 64bit machine to test this on so please process with caution.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/include/beecrypt
|-valign="top"
!Installed Libraries:
|libbeecrypt.{a,so}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!libbeecrypt.{a,so}
|is a library that contains functions for strong and fast cryptography.
|}