CBLFS - User contributions [en]

Hal-info

2009-08-31T00:28:22Z

Devilsclaw: /* Multilib */

{|style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://hal.freedesktop.org/releases/hal-info-{{hal-info-Version}}.tar.gz
|}

----

{{Package-Introduction|hal-info is just a small hal package that provides hardware data and quirks. These quirks are currently things like what mice support reporting battery status, what music players are supported and what cameras are detected. This could also include a list of display adaptors that need resuming or a list of broken batteries that might explode.}}

== Dependencies ==

=== Recommended ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr --sysconfdir=/etc &&
make

Install the package

make install

=== N32 ===

Compile the package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --sysconfdir=/etc &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --sysconfdir=/etc &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
|None
|-valign="top"
! Installed Libraries:
|None
|-valign="top"
! Installed Directories:
|/usr/share/hal/fdi/information, /usr/share/hal/fdi/preprobe
|}

[[Category:General Utilities]]

Libsmbios

2009-08-31T00:16:10Z

Devilsclaw: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://linux.dell.com/libsmbios/download/libsmbios/libsmbios-{{Libsmbios-Version}}/libsmbios-{{Libsmbios-Version}}.tar.gz
|}

----

{{Package-Introduction|The libsmbios project aims towards providing access to as much BIOS information as possible. It does this by providing a library of functions that can be used as well as sample binaries.|http://linux.dell.com/libsmbios/main/index.html}}

== Dependencies ==

=== Required ===
* [[LibXML2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

== Multilib ==

=== 32Bit ===

Compile the package:
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" &&
export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
./configure --prefix=/usr &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

=== N32 ===
Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" &&
export USE_ARCH=N32 &&
sed -i "/yumplugindir/s:/lib:&32:" Makefile.in &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

=== 64Bit ===

Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" &&
export USE_ARCH=64 &&
sed -i "/yumplugindir/s:/lib:&64:" Makefile.in &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

Libsmbios

2009-08-31T00:15:28Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://linux.dell.com/libsmbios/download/libsmbios/libsmbios-{{Libsmbios-Version}}/libsmbios-{{Libsmbios-Version}}.tar.gz
|}

----

{{Package-Introduction|The libsmbios project aims towards providing access to as much BIOS information as possible. It does this by providing a library of functions that can be used as well as sample binaries.|http://linux.dell.com/libsmbios/main/index.html}}

== Dependencies ==

=== Required ===
* [[LibXML2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

== Multilib ==

=== 32Bit ===

Compile the package:
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" &&
export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
./configure --prefix=/usr &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

=== N32 ===
Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" &&
export USE_ARCH=N32 &&
sed -i "/yumplugindir/s:/lib:&64:" Makefile.in &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

=== 64Bit ===

Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" &&
export USE_ARCH=64 &&
sed -i "/yumplugindir/s:/lib:&64:" Makefile.in &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

Libsmbios

2009-08-31T00:15:11Z

Devilsclaw: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://linux.dell.com/libsmbios/download/libsmbios/libsmbios-{{Libsmbios-Version}}/libsmbios-{{Libsmbios-Version}}.tar.gz
|}

----

{{Package-Introduction|The libsmbios project aims towards providing access to as much BIOS information as possible. It does this by providing a library of functions that can be used as well as sample binaries.|http://linux.dell.com/libsmbios/main/index.html}}

== Dependencies ==

=== Required ===
* [[LibXML2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

== Multilib ==

=== 32Bit ===

Compile the package:
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" &&
export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
./configure --prefix=/usr &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

=== N32 ===
Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" &&
export USE_ARCH=N32 &&
sed -i "/yumplugindir/s:/lib:&64:" Makefile.in &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

=== 64Bit ===

Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" &&
export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

Libsmbios

2009-08-30T23:49:05Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://linux.dell.com/libsmbios/download/libsmbios/libsmbios-{{Libsmbios-Version}}/libsmbios-{{Libsmbios-Version}}.tar.gz
|}

----

{{Package-Introduction|The libsmbios project aims towards providing access to as much BIOS information as possible. It does this by providing a library of functions that can be used as well as sample binaries.|http://linux.dell.com/libsmbios/main/index.html}}

== Dependencies ==

=== Required ===
* [[LibXML2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

== Multilib ==

=== 32Bit ===

Compile the package:
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" &&
export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
./configure --prefix=/usr &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

=== N32 ===
Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" &&
export USE_ARCH=N32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

=== 64Bit ===

Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" &&
export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv src/include/smbios /usr/include

Libsmbios

2009-08-30T23:38:59Z

Devilsclaw: /* Dependencies */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://linux.dell.com/libsmbios/download/libsmbios/libsmbios-{{Libsmbios-Version}}/libsmbios-{{Libsmbios-Version}}.tar.gz
|}

----

{{Package-Introduction|The libsmbios project aims towards providing access to as much BIOS information as possible. It does this by providing a library of functions that can be used as well as sample binaries.|http://linux.dell.com/libsmbios/main/index.html}}

== Dependencies ==

=== Required ===
* [[LibXML2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv include/smbios /usr/include

== Multilib ==

=== 32Bit ===

Compile the package:
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" &&
export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
./configure --prefix=/usr &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv include/smbios /usr/include

=== N32 ===
Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" &&
export USE_ARCH=N32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv include/smbios /usr/include

=== 64Bit ===

Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" &&
export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv include/smbios /usr/include

Libsmbios

2009-08-30T23:38:40Z

Devilsclaw: /* Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://linux.dell.com/libsmbios/download/libsmbios/libsmbios-{{Libsmbios-Version}}/libsmbios-{{Libsmbios-Version}}.tar.gz
|}

----

{{Package-Introduction|The libsmbios project aims towards providing access to as much BIOS information as possible. It does this by providing a library of functions that can be used as well as sample binaries.|http://linux.dell.com/libsmbios/main/index.html}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv include/smbios /usr/include

== Multilib ==

=== 32Bit ===

Compile the package:
export PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" &&
export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
./configure --prefix=/usr &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv include/smbios /usr/include

=== N32 ===
Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" &&
export USE_ARCH=N32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv include/smbios /usr/include

=== 64Bit ===

Compile the package:

export PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" &&
export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install
unset PKG_CONFIG_PATH
unset USE_ARCH

Copy the headers to use by other applications (such as [[HAL]])

cp -prfv include/smbios /usr/include

Template:Libsmbios-Version

2009-08-30T23:34:55Z

Devilsclaw:

2.2.19

Eject

2009-08-30T22:54:52Z

Devilsclaw: /* Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://ca.geocities.com/jefftranter@rogers.com/eject-{{Eject-Version}}.tar.gz
|}

----

{{Package-Introduction|Provides software control for ejecting removable media such as CD-ROM, floppy, Zip, etc. drives.|http://ca.geocities.com/jefftranter@rogers.com/}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr &&
make

Install the package

make install

= Contents =

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|/usr/share/doc/eject-2.1.5
|-valign="top"
!Installed Programs:
|volname,eject
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!volname
|is a utility for retrieving the volume name of a device.
|-valign="top"
!eject
|is a program to assist with ejecting removable media.
|}

[[Category:General Utilities]]

Acpid

2009-08-30T22:36:47Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://prdownloads.sourceforge.net/acpid/acpid-{{Acpid-Version}}.tar.gz
|}

----

{{Package-Introduction|The Advanced Configuration & Power Interface Daemon (ACPID) is a flexible and totally extensible daemon for responding to ACPI events. It listens to /proc/acpi/event and executes programs to handle the events when they occur. The programs it executes are configured through a set of configuration files.|https://sourceforge.net/projects/acpid/}}

== Dependencies ==

=== Optional ===
* [[Hdparm]]

{{Note|Acpid does not use ''DESTDIR'', Acpid uses ''INSTPREFIX'' instead. Use ''INSTPREFIX'' as you would normally use ''DESTDIR''.}}

== Non-Multilib ==

Compile the package:

sed -i "s/-Werror//g" Makefile &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

sed -i "s/-Werror//g" Makefile &&
make CC="gcc ${BUILD32}"

Install the package

make install

=== N32 ===

Compile the package:

sed -i "s/-Werror//g" Makefile &&
make CC="gcc ${BUILDN32}"

Install the package

make install

=== 64Bit ===

Compile the package:

sed -i "s/-Werror//g" Makefile &&
make CC="gcc ${BUILD64}"

Install the package

make install

== Configuring ==

=== Configuring Events ===

The following sample event included with Acpid will set the hard drive to spindown after 5 minutes when the computer is on battery power but keep it on 100% of the time while the computer is plugged in:

mkdir -pv /etc/acpi/events &&
cp -v samples/battery/battery.conf /etc/acpi/events &&
cp -v samples/battery/battery.sh /etc/acpi &&
chmod 755 /etc/acpi/battery.sh

The above sample depends on [[Hdparm]] to function properly.

=== Bootscript ===

Create the bootscript:

cat > /etc/rc.d/init.d/acpid << "EOF"
#!/bin/sh
# Begin $rc_base/init.d/acpid

. /etc/sysconfig/rc
. ${rc_functions}

case "${1}" in
start)
boot_mesg "Starting acpid..."
loadproc /usr/sbin/acpid
;;

stop)
boot_mesg "Stopping acpid..."
killproc /usr/sbin/acpid
;;

restart)
${0} stop
sleep 1
${0} start
;;

status)
statusproc /usr/sbin/acpid
;;

*)
echo "Usage: ${0} {start|stop|restart|status}"
exit 1
;;
esac

# End $rc_base/init.d/acpid
EOF
chmod -v 754 /etc/rc.d/init.d/acpid

Link it into the runlevels:

for link in /etc/rc.d/rc{{0,1,6}.d/K32,{2,3,4,5}.d/S18}acpid; do
ln -sfv ../init.d/acpid $link;
done

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| acpid acpi_listen
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| None
|}

[[Category:Power Management]]

CUPS

2009-08-30T22:16:45Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://ftp.easysw.com/pub/cups/{{CUPS-Version}}/cups-{{CUPS-Version}}-source.tar.bz2
|}

----

{{Package-Introduction|The Common Unix Printing System (CUPS) is a print spooler and associated utilities. It is based on the "Internet Printing Protocol" and provides printing services to most PostScript and raster printers.|http://www.cups.org/}}

{{Note|If you get "Unsuported format, application/postscript" errors, try installing Cups/Ghostscript/foomatic (if needed), then start cups.}}

== Dependencies ==

=== Required ===
* [[libjpeg]]
* [[libpng]]
* [[LibTIFF]]

=== Optional ===
* [[OpenSSL]] or [[GnuTLS]]
* [[D-BUS]]
* [[Linux-PAM]]
* [[PHP]]
* [[Python]]
* [[JDK]]
* [[OpenSLP]]
* [[libpaper]]
* [[Valgrind]]
* [[OpenLDAP]]
* [[acl]]

== Configuration Information ==

{{Note|CUPS does not use ''DESTDIR'', CUPS uses ''BUILDROOT'' instead. Use ''BUILDROOT'' as you would normally use ''DESTDIR''.}}

== Creating the lp User ==

useradd -c "Print Service User" -d /dev/null -g lp -s /bin/false -u 10 lp

== Non-Multilib ==

If you utilize [[Linux-PAM]], you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

./configure &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support

ln -s `which smbspool` /usr/lib/cups/backend/smb

== Multilib ==

=== 32Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 ./configure \
--libdir=/usr/lib &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-32}

If wanting to print to a Windows printer, pass this line to add smb support (Untested)

ln -s `which smbspool` /usr/lib/cups/backend/smb

=== N32 ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

sed -i '/CUPS_SERVERBIN/s:/lib:&32:' configure &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 ./configure \
--libdir=/usr/lib32 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-n32}

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib32/cups/backend/smb

=== 64Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

sed -i '/CUPS_SERVERBIN/s:/lib:&64:' configure &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 ./configure \
--libdir=/usr/lib64 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/cups-config

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib64/cups/backend/smb

== Configuring ==

=== BootScript ===

Install the init script included in the [[bootscripts]] package.

make install-cups

[[Category:Printing]]

CUPS

2009-08-30T22:15:14Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://ftp.easysw.com/pub/cups/{{CUPS-Version}}/cups-{{CUPS-Version}}-source.tar.bz2
|}

----

{{Package-Introduction|The Common Unix Printing System (CUPS) is a print spooler and associated utilities. It is based on the "Internet Printing Protocol" and provides printing services to most PostScript and raster printers.|http://www.cups.org/}}

{{Note|If you get "Unsuported format, application/postscript" errors, try installing Cups/Ghostscript/foomatic (if needed), then start cups.}}

== Dependencies ==

=== Required ===
* [[libjpeg]]
* [[libpng]]
* [[LibTIFF]]

=== Optional ===
* [[OpenSSL]] or [[GnuTLS]]
* [[D-BUS]]
* [[Linux-PAM]]
* [[PHP]]
* [[Python]]
* [[JDK]]
* [[OpenSLP]]
* [[libpaper]]
* [[Valgrind]]
* [[OpenLDAP]]
* [[acl]]

== Configuration Information ==

{{Note|CUPS does not use ''DESTDIR'', CUPS uses ''BUILDROOT'' instead. Use ''BUILDROOT'' as you would normally use ''DESTDIR''.}}

== Creating the lp User ==

useradd -c "Print Service User" -d /dev/null -g lp -s /bin/false -u 10 lp

== Non-Multilib ==

If you utilize [[Linux-PAM]], you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

./configure &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support

ln -s `which smbspool` /usr/lib/cups/backend/smb

== Multilib ==

=== 32Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 ./configure \
--libdir=/usr/lib &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-32}

If wanting to print to a Windows printer, pass this line to add smb support (Untested)

ln -s `which smbspool` /usr/lib/cups/backend/smb

=== N32 ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

CUPS likes to install files into /usr/lib instead of where we tell it to so run this to fix it.
sed -i '/CUPS_SERVERBIN/s:/lib:&32:' configure

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 ./configure \
--libdir=/usr/lib32 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-n32}

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib32/cups/backend/smb

=== 64Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

CUPS likes to install files into /usr/lib instead of where we tell it to so run this to fix it.
sed -i '/CUPS_SERVERBIN/s:/lib:&64:' configure

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 ./configure \
--libdir=/usr/lib64 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/cups-config

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib64/cups/backend/smb

== Configuring ==

=== BootScript ===

Install the init script included in the [[bootscripts]] package.

make install-cups

[[Category:Printing]]

Pm-utils

2009-08-30T21:49:29Z

Devilsclaw: /* Contents */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/usr/lib \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --libdir=/usr/lib32 \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --libdir=/usr/lib64 \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib{,32,64}/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib{,32,64}/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:40:27Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/usr/lib \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --libdir=/usr/lib32 \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --libdir=/usr/lib64 \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:40:01Z

Devilsclaw: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/usr/lib \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --libdir=/usr/lib32 \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --libdir=/usr/lib64 --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:39:14Z

Devilsclaw: /* 32Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/usr/lib \
--prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --libdir=/usr/lib32 --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --libdir=/usr/lib64 --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:38:13Z

Devilsclaw: /* 32Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --libdir=/usr/lib --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --libdir=/usr/lib32 --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --libdir=/usr/lib64 --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:37:42Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/usr/lib --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --libdir=/usr/lib32 --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --libdir=/usr/lib64 --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:36:53Z

Devilsclaw: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/usr/lib --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --libdir=/usr/lib32 --prefix=/usr --sysconfdir=/etc \
--docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --libdir=/usr/lib64 --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:36:25Z

Devilsclaw: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/usr/lib --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" ./configure --libdir=/usr/lib32 --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --libdir=/usr/lib64 --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:32:54Z

Devilsclaw: /* 32Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --libdir=/usr/lib --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

to do

Install the package:

to do

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --libdir=/usr/lib64 --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

Pm-utils

2009-08-30T21:32:14Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://pm-utils.freedesktop.org/releases/pm-utils-{{Pm-utils-Version}}.tar.gz
|}

----

{{Package-Introduction|Pm-utils is a set of tools to control power management (e.g. suspend and resume).|http://pm-utils.freedesktop.org/wiki/}}

== Dependencies ==

=== Runtime ===
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-{{Pm-utils-Version}} &&
make

Install the package:

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is required.'''''

=== 32Bit ===

Compile the package:

to do

Install the package:

to do

=== N32 ===

Compile the package:

to do

Install the package:

to do

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --libdir=/usr/lib64 --prefix=/usr --sysconfdir=/etc --docdir=/usr/share/doc/pm-utils-1.2.3 &&
make

Install the package:

make install

== Configuring ==

=== Config files ===
Configuration files should be put in /etc/pm/config.d. See the pm-action(8) man page for more information.

=== Hooks ===
Hooks are run when the system is put into a sleep state or resumed. Default hooks are located in /usr/lib/pm-utils/sleep.d, and user hooks should be put in /etc/pm/sleep.d. See the pm-action(8) man page for more information.

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/lib/pm-utils, /etc/pm
|-valign="top"
!Installed Programs:
|on_ac_power, pm-hibernate, pm-is-supported, pm-powersave, pm-suspend, pm-suspend-hybrid, /usr/lib/pm-utils/bin/{pm-action,pm-pmu,pm-reset-swap}
|-valign="top"
!Installed Libraries:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!on_ac_power
|is a script that determines whether the system is running on AC power (rather than a battery).
|-valign="top"
!pm-hibernate
|is a symlink to pm-action that puts the computer into hibernate mode (i.e., saves the contents of memory to disk and shuts down).
|-valign="top"
!pm-is-supported
|is a script that checks whether power management features such as suspend and hibernate are supported.
|-valign="top"
!pm-powersave
|is a script that puts the computer into powersaving (low power) mode.
|-valign="top"
!pm-suspend
|is a symlink to pm-action that puts the computer into suspend mode.
|-valign="top"
!pm-suspend-hybrid
|is a symlink to pm-action that puts the computer into suspend mode (like hibernate, but resumes more quickly).
|-valign="top"
!pm-action
|is a script that puts the computer into a sleep state (hibernate, suspend, or suspend-hybrid).
|-valign="top"
!pm-pmu
|is a program that puts computers which have a Macintosh PMU into suspend mode.
|-valign="top"
!pm-reset-swap
|is a program that marks a swap partition unusable for resuming from hibernate.
|}

[[Category:Power Management]]

CUPS

2009-08-30T21:25:47Z

Devilsclaw: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://ftp.easysw.com/pub/cups/{{CUPS-Version}}/cups-{{CUPS-Version}}-source.tar.bz2
|}

----

{{Package-Introduction|The Common Unix Printing System (CUPS) is a print spooler and associated utilities. It is based on the "Internet Printing Protocol" and provides printing services to most PostScript and raster printers.|http://www.cups.org/}}

{{Note|If you get "Unsuported format, application/postscript" errors, try installing Cups/Ghostscript/foomatic (if needed), then start cups.}}

== Dependencies ==

=== Required ===
* [[libjpeg]]
* [[libpng]]
* [[LibTIFF]]

=== Optional ===
* [[OpenSSL]] or [[GnuTLS]]
* [[D-BUS]]
* [[Linux-PAM]]
* [[PHP]]
* [[Python]]
* [[JDK]]
* [[OpenSLP]]
* [[libpaper]]
* [[Valgrind]]
* [[OpenLDAP]]
* [[acl]]

== Configuration Information ==

{{Note|CUPS does not use ''DESTDIR'', CUPS uses ''BUILDROOT'' instead. Use ''BUILDROOT'' as you would normally use ''DESTDIR''.}}

== Creating the lp User ==

useradd -c "Print Service User" -d /dev/null -g lp -s /bin/false -u 10 lp

== Non-Multilib ==

If you utilize [[Linux-PAM]], you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

./configure &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support

ln -s `which smbspool` /usr/lib/cups/backend/smb

== Multilib ==

=== 32Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 ./configure \
--libdir=/usr/lib &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-32}

If wanting to print to a Windows printer, pass this line to add smb support (Untested)

ln -s `which smbspool` /usr/lib/cups/backend/smb

=== N32 ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

CUPS likes to install files into /usr/lib instead of where we tell it to so run this to fix it.
sed -i 's@CUPS_SERVERBIN="$exec_prefix/lib/cups"@CUPS_SERVERBIN="$exec_prefix/lib32/cups"@g' configure

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 ./configure \
--libdir=/usr/lib32 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-n32}

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib32/cups/backend/smb

=== 64Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

CUPS likes to install files into /usr/lib instead of where we tell it to so run this to fix it.
sed -i 's@CUPS_SERVERBIN="$exec_prefix/lib/cups"@CUPS_SERVERBIN="$exec_prefix/lib64/cups"@g' configure

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 ./configure \
--libdir=/usr/lib64 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/cups-config

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib64/cups/backend/smb

== Configuring ==

=== BootScript ===

Install the init script included in the [[bootscripts]] package.

make install-cups

[[Category:Printing]]

CUPS

2009-08-30T21:25:01Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://ftp.easysw.com/pub/cups/{{CUPS-Version}}/cups-{{CUPS-Version}}-source.tar.bz2
|}

----

{{Package-Introduction|The Common Unix Printing System (CUPS) is a print spooler and associated utilities. It is based on the "Internet Printing Protocol" and provides printing services to most PostScript and raster printers.|http://www.cups.org/}}

{{Note|If you get "Unsuported format, application/postscript" errors, try installing Cups/Ghostscript/foomatic (if needed), then start cups.}}

== Dependencies ==

=== Required ===
* [[libjpeg]]
* [[libpng]]
* [[LibTIFF]]

=== Optional ===
* [[OpenSSL]] or [[GnuTLS]]
* [[D-BUS]]
* [[Linux-PAM]]
* [[PHP]]
* [[Python]]
* [[JDK]]
* [[OpenSLP]]
* [[libpaper]]
* [[Valgrind]]
* [[OpenLDAP]]
* [[acl]]

== Configuration Information ==

{{Note|CUPS does not use ''DESTDIR'', CUPS uses ''BUILDROOT'' instead. Use ''BUILDROOT'' as you would normally use ''DESTDIR''.}}

== Creating the lp User ==

useradd -c "Print Service User" -d /dev/null -g lp -s /bin/false -u 10 lp

== Non-Multilib ==

If you utilize [[Linux-PAM]], you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

./configure &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support

ln -s `which smbspool` /usr/lib/cups/backend/smb

== Multilib ==

=== 32Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 ./configure \
--libdir=/usr/lib &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-32}

If wanting to print to a Windows printer, pass this line to add smb support (Untested)

ln -s `which smbspool` /usr/lib/cups/backend/smb

=== N32 ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 ./configure \
--libdir=/usr/lib32 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-n32}

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib32/cups/backend/smb

=== 64Bit ===

If you utilize Linux-PAM, you need to modify some files so CUPS can find needed headers. Make the appropriate modifications using the following command:

sed -i -e "s@pam/pam@security/pam@g" \
{config-scripts/cups-pam.m4,scheduler/auth.c,configure}

CUPS likes to install files into /usr/lib instead of where we tell it to so run this to fix it.
sed -i 's@CUPS_SERVERBIN="$exec_prefix/lib/cups"@CUPS_SERVERBIN="$exec_prefix/lib64/cups"@g' configure

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 ./configure \
--libdir=/usr/lib64 &&
make

Install the package

make install &&
rm -rfv /etc/rc.d/*/*cups &&
mv -v /usr/bin/cups-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/cups-config

CUPS' man pages are compressed. If you want to uncompress them, use the following commands:

gunzip -v /usr/share/man/man1/{cancel,cups{-config,test{dsc,ppd}},lp{,options,passwd,q,rm,r,stat}}.1.gz
gunzip -v /usr/share/man/man5/{{classes,client,cups-snmp,cupsd,printers,subscriptions,mailto}.conf,mime.{convs,types}}.5.gz
gunzip -v /usr/share/man/man7/{backend,filter}.7
gunzip -v /usr/share/man/man8/{accept,cups{d,addsmb,enable,-{deviced,driverd,lpd,polld,}},lp{admin,info,move,c}}.8.gz

rm -v /usr/share/man/man8/{reject,cupsdisable}.8.gz

ln -sv accept.8 /usr/share/man/man8/reject.8
ln -sv cupsenable.8 /usr/share/man/man8/cupsdisable.8

If wanting to print to a Windows printer, pass this line to add smb support
(Untested)

ln -s `which smbspool` /usr/lib64/cups/backend/smb

== Configuring ==

=== BootScript ===

Install the init script included in the [[bootscripts]] package.

make install-cups

[[Category:Printing]]

Netkit-rsh

2009-08-30T18:57:28Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/netkit-rsh-{{netkit-rsh-version}}.tar.gz
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/netkit-rsh/netkit-rsh-{{netkit-rsh-version}}-fixes-1.patch
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

== Configuration Information ==

{{Note|Netkit-rsh does not use ''DESTDIR'', Netkit-rsh uses ''INSTALLROOT'' instead. Use ''INSTALLROOT'' as you would normally use ''DESTDIR''. Netkit-rsh fails to create the directories it needs to install into so do the fallowing.}}

install -d <DIRECTORY>/usr/bin
install -d <DIRECTORY>/usr/man/man1
install -d <DIRECTORY>/usr/sbin
install -d <DIRECTORY>/usr/man/man8

== Non-Multilib ==

Apply the patch:

patch -Np1 -i ../netkit-rsh-{{netkit-rsh-version}}-fixes-1.patch

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Apply the patch:

patch -Np1 -i ../netkit-rsh-{{netkit-rsh-version}}-fixes-1.patch

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Apply the patch:

patch -Np1 -i ../netkit-rsh-{{netkit-rsh-version}}-fixes-1.patch

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== 64Bit ===

Apply the patch:

patch -Np1 -i ../netkit-rsh-{{netkit-rsh-version}}-fixes-1.patch

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-
! Installed Programs:
| rcp, rexec, rlogin, rsh, in.rexecd, in.rlogind, in.rshd
|-
! Installed Libraries:
| None
|-
! Installed Directory:
| None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! rcp
| copies files between machines.
|-valign="top"
! rexec
| is remote execution client for an exec server.
|-valign="top"
! rlogin
| starts a terminal session on a remote host.
|-valign="top"
! rsh
| executes command on host.
|-valign="top"
! in.rexecd
| is the remote execution server daemon.
|-valign="top"
! in.rlogind
| provides a remote login facility with authentication.
|-valign="top"
! in.rshd
| provides a provides remote execution facilities.
|}

[[Category:Network Utilities]]

Template:Mesa-Version

2009-08-30T18:13:30Z

Devilsclaw:

7.4.4

Acl

2009-08-23T01:35:15Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://oss.sgi.com/projects/xfs/cmd_tars/acl_{{Acl-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

Without this package you will get this Message while installing KDELibs:

libacl was not found. Without that library, you will not be able
to manage access control lists on file systems that support them,
such as ext3 or reiserfs.

To enable ACL/XATTR support you must recompile coreutils.

== Dependencies ==

=== Required ===
* [[Attr]]

== Configuration Information ==

{{Note|Attr does not use support ''DESTDIR'' but you can add support by running the fallowing in the root of the source directory
before running configure.}}

cat >> include/builddefs.in << "EOF"
DESTDIR="$$dc_destdir"
PKG_BIN_DIR = $(DESTDIR)@bindir@
PKG_SBIN_DIR = $(DESTDIR)@sbindir@
PKG_LIB_DIR = $(DESTDIR)@libdir@@libdirsuffix@
PKG_DEVLIB_DIR = $(DESTDIR)@libexecdir@@libdirsuffix@
PKG_INC_DIR = $(DESTDIR)@includedir@/attr
PKG_MAN_DIR = $(DESTDIR)@mandir@
PKG_DOC_DIR = $(DESTDIR)@datadir@/doc/@pkg_name@
PKG_LOCALE_DIR = $(DESTDIR)@datadir@/locale
EOF

== Non-Multilib ==

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp install-sh{,.orig} &&
libtoolize -f -i &&
cp install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib --libexecdir=/usr/lib --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 /lib/libacl.so.1.1.0

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp install-sh{,.orig} &&
libtoolize -f -i &&
cp install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILD32}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib --libexecdir=/usr/lib --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 /lib/libacl.so.1.1.0

=== N32 ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp install-sh{,.orig} &&
libtoolize -f -i &&
cp install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILDN32}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib32 --libexecdir=/usr/lib32 --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 /lib32/libacl.so.1.1.0

=== 64Bit ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp install-sh{,.orig} &&
libtoolize -f -i &&
cp install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILD64}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib64 --libexecdir=/usr/lib64 --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 /lib64/libacl.so.1.1.0

= Contents =

{| style="text-align: left;"
|-
! Installed Programs:
| ???
|-
! Installed Libraries:
| ???
|-
! Installed Directory:
| ???
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-
! program1
| ???
|-
! program2
| ???
|}

[[Category:General Libs]]

Attr

2009-08-23T01:30:18Z

Devilsclaw: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://oss.sgi.com/projects/xfs/cmd_tars/attr_{{Attr-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

== Configuration Information ==

{{Note|Attr does not use support ''DESTDIR'' but you can add support by running the fallowing in the root of the source directory
before running configure.}}

cat >> include/builddefs.in << "EOF"
DESTDIR="$$dc_destdir"
PKG_BIN_DIR = $(DESTDIR)@bindir@
PKG_SBIN_DIR = $(DESTDIR)@sbindir@
PKG_LIB_DIR = $(DESTDIR)@libdir@@libdirsuffix@
PKG_DEVLIB_DIR = $(DESTDIR)@libexecdir@@libdirsuffix@
PKG_INC_DIR = $(DESTDIR)@includedir@/attr
PKG_MAN_DIR = $(DESTDIR)@mandir@
PKG_DOC_DIR = $(DESTDIR)@datadir@/doc/@pkg_name@
PKG_LOCALE_DIR = $(DESTDIR)@datadir@/locale
EOF

== Non-Multilib ==

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp -v install-sh{,.orig} &&
libtoolize -f -i &&
cp -vf install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib --libexecdir=/usr/lib --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 -v /lib/libattr.so.1.1.0 &&
rm -v /lib/libattr.{,l}a

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp -v install-sh{,.orig} &&
libtoolize -f -i &&
cp -vf install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILD32}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib --libexecdir=/usr/lib --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package:

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 -v /lib/libattr.so.1.1.0 &&
rm -v /lib/libattr.{,l}a

=== N32 ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp -v install-sh{,.orig} &&
libtoolize -f -i &&
cp -vf install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILDN32}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib32 --libexecdir=/usr/lib32 --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package:

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 -v /lib32/libattr.so.1.1.0 &&
rm -v /lib32/libattr.{,l}a

=== 64Bit ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp -v install-sh{,.orig} &&
libtoolize -f -i &&
cp -vf install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILD64}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib64 --libexecdir=/usr/lib64 --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package:

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 -v /lib64/libattr.so.1.1.0 &&
rm -v /lib64/libattr.{,l}a

[[Category:General Libs]]

Attr

2009-08-23T01:26:50Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://oss.sgi.com/projects/xfs/cmd_tars/attr_{{Attr-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

== Configuration Information ==

{{Note|Attr does not use support ''DESTDIR'' but you can add support by running the fallowing in the root of the source directory
.}}

cat >> include/builddefs.in << "EOF"
DESTDIR="$$dc_destdir"
PKG_BIN_DIR = $(DESTDIR)@bindir@
PKG_SBIN_DIR = $(DESTDIR)@sbindir@
PKG_LIB_DIR = $(DESTDIR)@libdir@@libdirsuffix@
PKG_DEVLIB_DIR = $(DESTDIR)@libexecdir@@libdirsuffix@
PKG_INC_DIR = $(DESTDIR)@includedir@/attr
PKG_MAN_DIR = $(DESTDIR)@mandir@
PKG_DOC_DIR = $(DESTDIR)@datadir@/doc/@pkg_name@
PKG_LOCALE_DIR = $(DESTDIR)@datadir@/locale
EOF

== Non-Multilib ==

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp -v install-sh{,.orig} &&
libtoolize -f -i &&
cp -vf install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib --libexecdir=/usr/lib --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 -v /lib/libattr.so.1.1.0 &&
rm -v /lib/libattr.{,l}a

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp -v install-sh{,.orig} &&
libtoolize -f -i &&
cp -vf install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILD32}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib --libexecdir=/usr/lib --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package:

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 -v /lib/libattr.so.1.1.0 &&
rm -v /lib/libattr.{,l}a

=== N32 ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp -v install-sh{,.orig} &&
libtoolize -f -i &&
cp -vf install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILDN32}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib32 --libexecdir=/usr/lib32 --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package:

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 -v /lib32/libattr.so.1.1.0 &&
rm -v /lib32/libattr.{,l}a

=== 64Bit ===

Compile the package:

sed -i Makefile \
-e '/autoconf/d' \
-e 's@default: $(CONFIGURE)@default:@' &&
sed -i "/AC_OUTPUT/i\AC_PROG_LIBTOOL" configure.in &&
cp -v install-sh{,.orig} &&
libtoolize -f -i &&
cp -vf install-sh{.orig,} &&
aclocal -I m4 &&
autoconf &&
CC="gcc ${BUILD64}" ./configure --prefix=/ --exec-prefix=/ --sbindir=/sbin \
--bindir=/usr/sbin --libdir=/lib64 --libexecdir=/usr/lib64 --includedir=/usr/include \
--mandir=/usr/share/man --datadir=/usr/share &&
make DEBUG=-DNDEBUG LIBTOOL="$PWD/libtool"

Install the package:

make LIBTOOL=$PWD/libtool install install-dev install-lib &&
chmod 755 -v /lib64/libattr.so.1.1.0 &&
rm -v /lib64/libattr.{,l}a

[[Category:General Libs]]

PHP

2009-08-23T00:25:02Z

Devilsclaw: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://us2.php.net/get/php-{{PHP-Version}}.tar.bz2/from/us.php.net/mirror
|}

----

{{Package-Introduction|PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML.|http://www.php.net/}}

== Warning: ==

The PHP Developer team means:

"We do not recommend using a threaded MPM in production with Apache2. Use the prefork MPM instead, or use Apache1. For information on why, read the related FAQ entry on using Apache2 with a threaded MPM"[http://de.php.net/manual/en/faq.installation.php#faq.installation.apache2]"

== Dependencies ==

=== Required ===
* [[Apache]]

=== Optional ===
* [[libjpeg]]
* [[libmcrypt]]
* [[GDBM]]
* [[OpenSSL]]
* [[OpenLDAP]]
* [[MySQL]]
* [[GD]]

== Configuration Information ==

See the output of '''./configure --help''' for many more configuration options.

If you use Apache 1 then you must use --with-apxs instead --with-apxs2

If you want use Libmcrypt then you must add --with-mcrypt to the configure script

{{Note|PHP does not use ''DESTDIR'', it uses ''INSTALL_ROOT'' for the same purpose. Use ''INSTALL_ROOT'' as you would normally use ''DESTDIR''. There are some errors that are safe to ignore. It also will fail if it does not find a valid httpd.conf in the < DIRECTORY >etc/apache folder. one way to fix this is
install -d <DIRECTORY>/etc/apache
&& cp /etc/apache/httpd.conf <DIRECTOR>/etc/apache/
or figure out a way to fake the httpd.conf. remember to deal with the new data in httpd.conf with your installer}}

{{Note|There are some reproducable problems with PHP on both x86 and x86_64 architecture when compiling with GCC4 and '''-O3''' optimization (see for example <nowiki>http://bugs.gentoo.org/show_bug.cgi?id=211611</nowiki>, there are more).}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc/php \
--libdir=/usr/lib --localstatedir=/var \
--with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install
cp php.ini-recommended /etc/php/php.ini

The install script changes your Apache configuration and adds the entry: "LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so". But it forgets to set the mime application type. Open /etc/apache/httpd.conf and add following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

<IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

To test your PHP installation, try this:

cat > /srv/www/htdocs/phptest.php << "EOF"
<html>
<head>
<title>PHP-Testpage</title>
</head>
<body>
<?php
phpinfo();
?>
</body>
</html>
EOF

/etc/rc.d/init.d/apache restart
lynx localhost/phptest.php

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr --sysconfdir=/etc/php --libdir=/usr/lib \
--localstatedir=/var --with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install &&
mv -v /usr/bin/php-config{,-32} &&
cp php.ini-recommended /etc/php/php.ini

The installscript change your Apache config and add the entry: "LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so"
But it forgets to set the mime applicationtype. So go to the /etc/apache/httpd.conf and add following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

If you build also a 64Bit PHP, you must:

rm -f /etc/php/pear.conf

----

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 MYSQL_LIB_DIR=/usr/lib64 \
./configure --prefix=/usr --sysconfdir=/etc/php \
--libdir=/usr/lib64 --localstatedir=/var \
--with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install
mv -v /usr/bin/php-config{,-64}
ln -sfv multiarch_wrapper /usr/bin/php-config
cp php.ini-recommended /etc/php/php.ini

The installscript change your Apache config and add the entry: "LoadModule php{{PHP-Version2}}_module lib64/apache/libphp{{PHP-Version2}}.so"
But it forgets to set the mime applicationtype. So go to the /etc/apache/httpd.conf and add the following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

<IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

{{Note|If you have a 32bit Apache then make sure you have the following in httpd.conf:
LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so
If you have a 64bit Apache then make sure you have the following in httpd.conf:
LoadModule php{{PHP-Version2}}_module lib64/apache/libphp{{PHP-Version2}}.so
}}

[[Category:Programming]]

PHP

2009-08-23T00:06:19Z

Devilsclaw: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://us2.php.net/get/php-{{PHP-Version}}.tar.bz2/from/us.php.net/mirror
|}

----

{{Package-Introduction|PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML.|http://www.php.net/}}

== Warning: ==

The PHP Developer team means:

"We do not recommend using a threaded MPM in production with Apache2. Use the prefork MPM instead, or use Apache1. For information on why, read the related FAQ entry on using Apache2 with a threaded MPM"[http://de.php.net/manual/en/faq.installation.php#faq.installation.apache2]"

== Dependencies ==

=== Required ===
* [[Apache]]

=== Optional ===
* [[libjpeg]]
* [[libmcrypt]]
* [[GDBM]]
* [[OpenSSL]]
* [[OpenLDAP]]
* [[MySQL]]
* [[GD]]

== Configuration Information ==

See the output of '''./configure --help''' for many more configuration options.

If you use Apache 1 then you must use --with-apxs instead --with-apxs2

If you want use Libmcrypt then you must add --with-mcrypt to the configure script

{{Note|PHP does not use ''DESTDIR'', it uses ''INSTALL_ROOT'' for the same purpose. Use ''INSTALL_ROOT'' as you would normally use ''DESTDIR''. There are some errors that are safe to ignore. It also will fail if it does not find a valid httpd.conf in the < DIRECTORY >etc/apache folder. one way to fix this is
install -d < DIRECTORY >/etc/apache
&& cp /etc/apache/httpd.conf <DIRECTOR>etc/apache/
or figure out a way to fake the httpd.conf. remember to deal with the new data in httpd.conf with your installer}}

{{Note|There are some reproducable problems with PHP on both x86 and x86_64 architecture when compiling with GCC4 and '''-O3''' optimization (see for example <nowiki>http://bugs.gentoo.org/show_bug.cgi?id=211611</nowiki>, there are more).}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc/php \
--libdir=/usr/lib --localstatedir=/var \
--with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install
cp php.ini-recommended /etc/php/php.ini

The install script changes your Apache configuration and adds the entry: "LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so". But it forgets to set the mime application type. Open /etc/apache/httpd.conf and add following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

<IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

To test your PHP installation, try this:

cat > /srv/www/htdocs/phptest.php << "EOF"
<html>
<head>
<title>PHP-Testpage</title>
</head>
<body>
<?php
phpinfo();
?>
</body>
</html>
EOF

/etc/rc.d/init.d/apache restart
lynx localhost/phptest.php

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr --sysconfdir=/etc/php --libdir=/usr/lib \
--localstatedir=/var --with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install &&
mv -v /usr/bin/php-config{,-32} &&
cp php.ini-recommended /etc/php/php.ini

The installscript change your Apache config and add the entry: "LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so"
But it forgets to set the mime applicationtype. So go to the /etc/apache/httpd.conf and add following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

If you build also a 64Bit PHP, you must:

rm -f /etc/php/pear.conf

----

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 MYSQL_LIB_DIR=/usr/lib64 \
./configure --prefix=/usr --sysconfdir=/etc/php \
--libdir=/usr/lib64 --localstatedir=/var \
--with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install
mv -v /usr/bin/php-config{,-64}
ln -sfv multiarch_wrapper /usr/bin/php-config
cp php.ini-recommended /etc/php/php.ini

The installscript change your Apache config and add the entry: "LoadModule php{{PHP-Version2}}_module lib64/apache/libphp{{PHP-Version2}}.so"
But it forgets to set the mime applicationtype. So go to the /etc/apache/httpd.conf and add the following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

<IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

{{Note|If you have a 32bit Apache then make sure you have the following in httpd.conf:
LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so
If you have a 64bit Apache then make sure you have the following in httpd.conf:
LoadModule php{{PHP-Version2}}_module lib64/apache/libphp{{PHP-Version2}}.so
}}

[[Category:Programming]]

PHP

2009-08-23T00:05:18Z

Devilsclaw: /* Configuration Information */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://us2.php.net/get/php-{{PHP-Version}}.tar.bz2/from/us.php.net/mirror
|}

----

{{Package-Introduction|PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML.|http://www.php.net/}}

== Warning: ==

The PHP Developer team means:

"We do not recommend using a threaded MPM in production with Apache2. Use the prefork MPM instead, or use Apache1. For information on why, read the related FAQ entry on using Apache2 with a threaded MPM"[http://de.php.net/manual/en/faq.installation.php#faq.installation.apache2]"

== Dependencies ==

=== Required ===
* [[Apache]]

=== Optional ===
* [[libjpeg]]
* [[libmcrypt]]
* [[GDBM]]
* [[OpenSSL]]
* [[OpenLDAP]]
* [[MySQL]]
* [[GD]]

== Configuration Information ==

See the output of '''./configure --help''' for many more configuration options.

If you use Apache 1 then you must use --with-apxs instead --with-apxs2

If you want use Libmcrypt then you must add --with-mcrypt to the configure script

{{Note|PHP does not use ''DESTDIR'', it uses ''INSTALL_ROOT'' for the same purpose. Use ''INSTALL_ROOT'' as you would normally use ''DESTDIR''. There are some errors that are safe to ignore. It also will fail if it does not find a valid httpd.conf in the < | DIRECTORY >etc/apache folder. one way to fix this is
| install -d < DIRECTORY >/etc/apache
| cp /etc/apache/httpd.conf <DIRECTOR>etc/apache/
| or figure out a way to fake the httpd.conf. remember to deal with the new data in httpd.conf with your installer}}

{{Note|There are some reproducable problems with PHP on both x86 and x86_64 architecture when compiling with GCC4 and '''-O3''' optimization (see for example <nowiki>http://bugs.gentoo.org/show_bug.cgi?id=211611</nowiki>, there are more).}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc/php \
--libdir=/usr/lib --localstatedir=/var \
--with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install
cp php.ini-recommended /etc/php/php.ini

The install script changes your Apache configuration and adds the entry: "LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so". But it forgets to set the mime application type. Open /etc/apache/httpd.conf and add following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

<IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

To test your PHP installation, try this:

cat > /srv/www/htdocs/phptest.php << "EOF"
<html>
<head>
<title>PHP-Testpage</title>
</head>
<body>
<?php
phpinfo();
?>
</body>
</html>
EOF

/etc/rc.d/init.d/apache restart
lynx localhost/phptest.php

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr --sysconfdir=/etc/php --libdir=/usr/lib \
--localstatedir=/var --with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install &&
mv -v /usr/bin/php-config{,-32} &&
cp php.ini-recommended /etc/php/php.ini

The installscript change your Apache config and add the entry: "LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so"
But it forgets to set the mime applicationtype. So go to the /etc/apache/httpd.conf and add following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

If you build also a 64Bit PHP, you must:

rm -f /etc/php/pear.conf

----

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 MYSQL_LIB_DIR=/usr/lib64 \
./configure --prefix=/usr --sysconfdir=/etc/php \
--libdir=/usr/lib64 --localstatedir=/var \
--with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install
mv -v /usr/bin/php-config{,-64}
ln -sfv multiarch_wrapper /usr/bin/php-config
cp php.ini-recommended /etc/php/php.ini

The installscript change your Apache config and add the entry: "LoadModule php{{PHP-Version2}}_module lib64/apache/libphp{{PHP-Version2}}.so"
But it forgets to set the mime applicationtype. So go to the /etc/apache/httpd.conf and add the following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

<IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

{{Note|If you have a 32bit Apache then make sure you have the following in httpd.conf:
LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so
If you have a 64bit Apache then make sure you have the following in httpd.conf:
LoadModule php{{PHP-Version2}}_module lib64/apache/libphp{{PHP-Version2}}.so
}}

[[Category:Programming]]

PHP

2009-08-23T00:04:38Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://us2.php.net/get/php-{{PHP-Version}}.tar.bz2/from/us.php.net/mirror
|}

----

{{Package-Introduction|PHP is a widely-used general-purpose scripting language that is especially suited for Web development and can be embedded into HTML.|http://www.php.net/}}

== Warning: ==

The PHP Developer team means:

"We do not recommend using a threaded MPM in production with Apache2. Use the prefork MPM instead, or use Apache1. For information on why, read the related FAQ entry on using Apache2 with a threaded MPM"[http://de.php.net/manual/en/faq.installation.php#faq.installation.apache2]"

== Dependencies ==

=== Required ===
* [[Apache]]

=== Optional ===
* [[libjpeg]]
* [[libmcrypt]]
* [[GDBM]]
* [[OpenSSL]]
* [[OpenLDAP]]
* [[MySQL]]
* [[GD]]

== Configuration Information ==

See the output of '''./configure --help''' for many more configuration options.

If you use Apache 1 then you must use --with-apxs instead --with-apxs2

If you want use Libmcrypt then you must add --with-mcrypt to the configure script

{{Note|PHP does not use ''DESTDIR'', it uses ''INSTALL_ROOT'' for the same purpose. Use ''INSTALL_ROOT'' as you would normally use ''DESTDIR''. There are some errors that are safe to ignore. It also will fail if it does not find a valid httpd.conf in the < DIRECTORY >etc/apache folder. one way to fix this is
install -d < DIRECTORY >/etc/apache
cp /etc/apache/httpd.conf <DIRECTOR>etc/apache/
or figure out a way to fake the httpd.conf.
remember to deal with the new data in httpd.conf with your installer}}

{{Note|There are some reproducable problems with PHP on both x86 and x86_64 architecture when compiling with GCC4 and '''-O3''' optimization (see for example <nowiki>http://bugs.gentoo.org/show_bug.cgi?id=211611</nowiki>, there are more).}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc/php \
--libdir=/usr/lib --localstatedir=/var \
--with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install
cp php.ini-recommended /etc/php/php.ini

The install script changes your Apache configuration and adds the entry: "LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so". But it forgets to set the mime application type. Open /etc/apache/httpd.conf and add following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

<IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

To test your PHP installation, try this:

cat > /srv/www/htdocs/phptest.php << "EOF"
<html>
<head>
<title>PHP-Testpage</title>
</head>
<body>
<?php
phpinfo();
?>
</body>
</html>
EOF

/etc/rc.d/init.d/apache restart
lynx localhost/phptest.php

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr --sysconfdir=/etc/php --libdir=/usr/lib \
--localstatedir=/var --with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install &&
mv -v /usr/bin/php-config{,-32} &&
cp php.ini-recommended /etc/php/php.ini

The installscript change your Apache config and add the entry: "LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so"
But it forgets to set the mime applicationtype. So go to the /etc/apache/httpd.conf and add following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

If you build also a 64Bit PHP, you must:

rm -f /etc/php/pear.conf

----

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 MYSQL_LIB_DIR=/usr/lib64 \
./configure --prefix=/usr --sysconfdir=/etc/php \
--libdir=/usr/lib64 --localstatedir=/var \
--with-apxs2=/usr/sbin/apxs --with-mysql \
--with-layout=GNU &&
make

Install the package:

make install
mv -v /usr/bin/php-config{,-64}
ln -sfv multiarch_wrapper /usr/bin/php-config
cp php.ini-recommended /etc/php/php.ini

The installscript change your Apache config and add the entry: "LoadModule php{{PHP-Version2}}_module lib64/apache/libphp{{PHP-Version2}}.so"
But it forgets to set the mime applicationtype. So go to the /etc/apache/httpd.conf and add the following line in the <IfModule mime_module> section:

AddType application/x-httpd-php .php .phtml .php3 .htm .html

When you want start a site with php-code, you must add:

<IfModule dir_module>
DirectoryIndex index.html index.php index.php3 index.htm
</IfModule>

{{Note|If you have a 32bit Apache then make sure you have the following in httpd.conf:
LoadModule php{{PHP-Version2}}_module lib/apache/libphp{{PHP-Version2}}.so
If you have a 64bit Apache then make sure you have the following in httpd.conf:
LoadModule php{{PHP-Version2}}_module lib64/apache/libphp{{PHP-Version2}}.so
}}

[[Category:Programming]]

Template:Apache-Version

2009-08-22T21:58:56Z

Devilsclaw:

2.2.13

SGMLS

2009-08-22T19:36:18Z

Devilsclaw: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://cpan.org/authors/id/D/DM/DMEGG/SGMLSpm-{{Perl Module SGMLS-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Non-Multilib ==

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

make install &&
install -v -m755 -d /usr/share/doc/perl5 &&
rm -v DOC/HTML/SGMLSpm/sample.pl &&
cp -v DOC/sample.pl DOC/HTML/SGMLSpm/sample.pl &&
make install_html

== Multilib ==

=== 32Bit ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=32 make install

=== N32 ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=n32 make install

=== 64Bit ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=64 make install &&
install -v -m755 -d /usr/share/doc/perl5 &&
rm -v DOC/HTML/SGMLSpm/sample.pl &&
cp -v DOC/sample.pl DOC/HTML/SGMLSpm/sample.pl &&
make install_html

SGMLS

2009-08-22T19:35:50Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://cpan.org/authors/id/D/DM/DMEGG/SGMLSpm-{{Perl Module SGMLS-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Non-Multilib ==

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

make install &&
install -v -m755 -d /usr/share/doc/perl5 &&
rm -v DOC/HTML/SGMLSpm/sample.pl &&
cp -v DOC/sample.pl DOC/HTML/SGMLSpm/sample.pl
make install_html

== Multilib ==

=== 32Bit ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=32 make install

=== N32 ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=n32 make install

=== 64Bit ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=64 make install &&
install -v -m755 -d /usr/share/doc/perl5 &&
rm -v DOC/HTML/SGMLSpm/sample.pl &&
cp -v DOC/sample.pl DOC/HTML/SGMLSpm/sample.pl &&
make install_html

SGMLS

2009-08-22T19:35:01Z

Devilsclaw: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://cpan.org/authors/id/D/DM/DMEGG/SGMLSpm-{{Perl Module SGMLS-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Non-Multilib ==

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

make install &&
install -v -m755 -d /usr/share/doc/perl5 &&
rm -v DOC/HTML/SGMLSpm/sample.pl &&
cp -v DOC/sample.pl DOC/HTML/SGMLSpm/sample.pl
make install_html

== Multilib ==

=== 32Bit ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=32 make install

=== N32 ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=n32 make install

=== 64Bit ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=64 make install &&
install -v -m755 -d /usr/share/doc/perl5 &&
rm -v DOC/HTML/SGMLSpm/sample.pl &&
cp -v DOC/sample.pl DOC/HTML/SGMLSpm/sample.pl
make install_html

SGMLS

2009-08-22T19:33:36Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://cpan.org/authors/id/D/DM/DMEGG/SGMLSpm-{{Perl Module SGMLS-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Non-Multilib ==

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

make install &&
install -v -m755 -d /usr/share/doc/perl5 &&
make install_html &&
rm -v -f /usr/share/doc/perl5/SGMLSpm/sample.pl &&
install -v -m644 DOC/sample.pl /usr/share/doc/perl5/SGMLSpm

== Multilib ==

=== 32Bit ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=32 make install

=== N32 ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=n32 make install

=== 64Bit ===

If your system's Perl version is different than 5.8.8, you'll need to modify the sed command below to reflect the version you have installed.

sed -i -e 's@/usr/local/bin@/usr/bin@' \
-e 's@/usr/local/lib/perl5@$(shell perl -V:sitelibexp | cut -d'"\\\\'"' -f2)@' \
-e 's@/usr/local/lib/www/docs@/usr/share/doc/perl5@' \
Makefile

Install the module:

USE_ARCH=64 make install &&
install -v -m755 -d /usr/share/doc/perl5 &&
rm -v DOC/HTML/SGMLSpm/sample.pl &&
cp -v DOC/sample.pl DOC/HTML/SGMLSpm/sample.pl
make install_html

Template:Lynx-Version

2009-08-21T21:57:44Z

Devilsclaw:

2.8.7

Python

2009-08-20T21:52:51Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.python.org/ftp/python/{{Python-Version}}/Python-{{Python-Version}}.tar.bz2
|-valign='top"
!Required Patch (For Multilib):
| http://svn.cross-lfs.org/svn/repos/patches/Python/Python-{{Python-Version}}-multilib-2.patch
|}

----

{{Package-Introduction|Python is a dynamic object-oriented programming language that can be used for many kinds of software development. It offers strong support for integration with other languages and tools, comes with extensive standard libraries, and can be learned in a few days. Many Python programmers report substantial productivity gains and feel the language encourages the development of higher quality, more maintainable code.|http://www.python.org/}}

== Dependencies ==

=== Optional ===
* [[OpenSSL]]
* [[Tk]]
* [[GDBM]]
* [[X Window System]]
* [[SQLite3]]

== Non-Multilib ==

{{Note|If the test suite ('''make test''') fails because it cannot find python's math library, then you will need to install python before you can run the tests.}}

{{Note|If the installation of python fails, rebuild python. It appears to be somewhat inconsistant with regards to whether it works or not. The ''-fwrapv'' flag used with make attempts to fixes this. If it still doesn't complete '''make install''' without failing, then use '''make -i install''' instead ('''-i''' tells '''make''' to ignore errors). It's less desirable, but it should work. The other option is to run '''make install''' twice. The second time around it locates the installed python libraries it needs for the installation and is able to complete it.}}

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
./configure --prefix=/usr --enable-shared &&
make

Install the package

make install

=== Command Explanations ===

''--enable-shared'': Enables the building of shared libraries.

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr \
--enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-32} &&
mv -v /usr/bin/python{{Python-Version2}}{,-32} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-32}.h

=== N32 ===

Change the libdir that Python is going to use to lib32:

patch -Np1 -i ../Python-{{Python-Version}}-multilib-2.patch &&
sed -i -e "s:@@MULTILIB_DIR@@:lib32:g" \
Lib/distutils/command/install.py \
Lib/distutils/sysconfig.py \
Lib/site.py \
Makefile.pre.in \
Modules/Setup.dist \
Modules/getpath.c \
setup.py

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 --enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-n32} &&
mv -v /usr/bin/python{{Python-Version2}}{,-n32} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-n32}.h

=== 64Bit ===

Change the libdir that Python is going to use to lib64:

patch -Np1 -i ../Python-{{Python-Version}}-multilib-2.patch &&
sed -i -e "s:@@MULTILIB_DIR@@:lib64:g" \
Lib/distutils/command/install.py \
Lib/distutils/sysconfig.py \
Lib/site.py \
Makefile.pre.in \
Modules/Setup.dist \
Modules/getpath.c \
setup.py

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 --enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-64} &&
mv -v /usr/bin/python{{Python-Version2}}{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/python &&
ln -sfv multiarch_wrapper /usr/bin/python{{Python-Version2}} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-64}.h

{{Stub-Header|pyconfig|/usr/include/python{{Python-Version2}}}}

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| pydoc, python, python{{Python-Version2}}, python-config, python{{Python-Version2}}-config, smtpd.py, and (if Tk is installed) idle
|-valign="top"
! Installed Libraries:
| libpython{{Python-Version2}}.so and various modules in /usr/lib/lib-dynload
|-valign="top"
! Installed Directories:
| /usr/include/python{{Python-Version2}}, /usr/lib/python{{Python-Version2}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! pydoc
| is a tool for reading python documentation.
|-valign="top"
! python
| is an interpreted, interactive, object-oriented programming language.
|-valign="top"
! python{{Python-Version2}}
| is a version-specific version of '''python'''.
|-valign="top"
! python-config
| is a symlink to '''python{{Python-Version2}}-config'''.
|-valign="top"
! python{{Python-Version}}-config
| ???
|-valign="top"
! smtpd.py
| is a Python implemention of the minimal SMTP protocol as defined in RFC 821.
|-valign="top"
! idle
| is an Integrated DeveLopment Environment (IDLE) for Python. It's based on Tkinter, Python's bindings to the Tk widget set.
|-valign="top"
! libpython{{Python-Version2}}.so
| ???
|}

[[Category:Programming]]

Python

2009-08-20T21:52:21Z

Devilsclaw: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.python.org/ftp/python/{{Python-Version}}/Python-{{Python-Version}}.tar.bz2
|-valign='top"
!Required Patch (For Multilib):
| http://svn.cross-lfs.org/svn/repos/patches/Python/Python-{{Python-Version}}-multilib-2.patch
|}

----

{{Package-Introduction|Python is a dynamic object-oriented programming language that can be used for many kinds of software development. It offers strong support for integration with other languages and tools, comes with extensive standard libraries, and can be learned in a few days. Many Python programmers report substantial productivity gains and feel the language encourages the development of higher quality, more maintainable code.|http://www.python.org/}}

== Dependencies ==

=== Optional ===
* [[OpenSSL]]
* [[Tk]]
* [[GDBM]]
* [[X Window System]]
* [[SQLite3]]

== Non-Multilib ==

{{Note|If the test suite ('''make test''') fails because it cannot find python's math library, then you will need to install python before you can run the tests.}}

{{Note|If the installation of python fails, rebuild python. It appears to be somewhat inconsistant with regards to whether it works or not. The ''-fwrapv'' flag used with make attempts to fixes this. If it still doesn't complete '''make install''' without failing, then use '''make -i install''' instead ('''-i''' tells '''make''' to ignore errors). It's less desirable, but it should work. The other option is to run '''make install''' twice. The second time around it locates the installed python libraries it needs for the installation and is able to complete it.}}

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
./configure --prefix=/usr --enable-shared &&
make

Install the package

make install

=== Command Explanations ===

''--enable-shared'': Enables the building of shared libraries.

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr \
--enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-32} &&
mv -v /usr/bin/python{{Python-Version2}}{,-32} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-32}.h

=== N32 ===

Change the libdir that Python is going to use to lib32:

patch -Np1 -i ../Python-{{Python-Version}}-multilib-2.patch &&
sed -i -e "s:@@MULTILIB_DIR@@:lib32:g" \
Lib/distutils/command/install.py \
Lib/distutils/sysconfig.py \
Lib/site.py \
Makefile.pre.in \
Modules/Setup.dist \
Modules/getpath.c \
setup.py

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 --enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-n32} &&
mv -v /usr/bin/python{{Python-Version2}}{,-n32} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-n32}.h

=== 64Bit ===

Change the libdir that Python is going to use to lib64:

patch -Np1 -i ../Python-{{Python-Version}}-multilib-2.patch
sed -i -e "s:@@MULTILIB_DIR@@:lib64:g" \
Lib/distutils/command/install.py \
Lib/distutils/sysconfig.py \
Lib/site.py \
Makefile.pre.in \
Modules/Setup.dist \
Modules/getpath.c \
setup.py

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 --enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-64} &&
mv -v /usr/bin/python{{Python-Version2}}{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/python &&
ln -sfv multiarch_wrapper /usr/bin/python{{Python-Version2}} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-64}.h

{{Stub-Header|pyconfig|/usr/include/python{{Python-Version2}}}}

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| pydoc, python, python{{Python-Version2}}, python-config, python{{Python-Version2}}-config, smtpd.py, and (if Tk is installed) idle
|-valign="top"
! Installed Libraries:
| libpython{{Python-Version2}}.so and various modules in /usr/lib/lib-dynload
|-valign="top"
! Installed Directories:
| /usr/include/python{{Python-Version2}}, /usr/lib/python{{Python-Version2}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! pydoc
| is a tool for reading python documentation.
|-valign="top"
! python
| is an interpreted, interactive, object-oriented programming language.
|-valign="top"
! python{{Python-Version2}}
| is a version-specific version of '''python'''.
|-valign="top"
! python-config
| is a symlink to '''python{{Python-Version2}}-config'''.
|-valign="top"
! python{{Python-Version}}-config
| ???
|-valign="top"
! smtpd.py
| is a Python implemention of the minimal SMTP protocol as defined in RFC 821.
|-valign="top"
! idle
| is an Integrated DeveLopment Environment (IDLE) for Python. It's based on Tkinter, Python's bindings to the Tk widget set.
|-valign="top"
! libpython{{Python-Version2}}.so
| ???
|}

[[Category:Programming]]

Python

2009-08-20T21:50:47Z

Devilsclaw: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.python.org/ftp/python/{{Python-Version}}/Python-{{Python-Version}}.tar.bz2
|-valign='top"
!Required Patch (For Multilib):
| http://svn.cross-lfs.org/svn/repos/patches/Python/Python-{{Python-Version}}-multilib-2.patch
|}

----

{{Package-Introduction|Python is a dynamic object-oriented programming language that can be used for many kinds of software development. It offers strong support for integration with other languages and tools, comes with extensive standard libraries, and can be learned in a few days. Many Python programmers report substantial productivity gains and feel the language encourages the development of higher quality, more maintainable code.|http://www.python.org/}}

== Dependencies ==

=== Optional ===
* [[OpenSSL]]
* [[Tk]]
* [[GDBM]]
* [[X Window System]]
* [[SQLite3]]

== Non-Multilib ==

{{Note|If the test suite ('''make test''') fails because it cannot find python's math library, then you will need to install python before you can run the tests.}}

{{Note|If the installation of python fails, rebuild python. It appears to be somewhat inconsistant with regards to whether it works or not. The ''-fwrapv'' flag used with make attempts to fixes this. If it still doesn't complete '''make install''' without failing, then use '''make -i install''' instead ('''-i''' tells '''make''' to ignore errors). It's less desirable, but it should work. The other option is to run '''make install''' twice. The second time around it locates the installed python libraries it needs for the installation and is able to complete it.}}

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
./configure --prefix=/usr --enable-shared &&
make

Install the package

make install

=== Command Explanations ===

''--enable-shared'': Enables the building of shared libraries.

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr \
--enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-32} &&
mv -v /usr/bin/python{{Python-Version2}}{,-32} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-32}.h

=== N32 ===

Change the libdir that Python is going to use to lib32:

patch -Np1 -i ../Python-{{Python-Version}}-multilib-1.patch
sed -i -e "s:@@MULTILIB_DIR@@:lib32:g" \
Lib/distutils/command/install.py \
Lib/distutils/sysconfig.py \
Lib/site.py \
Makefile.pre.in \
Modules/Setup.dist \
Modules/getpath.c \
setup.py

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 --enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-n32} &&
mv -v /usr/bin/python{{Python-Version2}}{,-n32} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-n32}.h

=== 64Bit ===

Change the libdir that Python is going to use to lib64:

patch -Np1 -i ../Python-{{Python-Version}}-multilib-2.patch
sed -i -e "s:@@MULTILIB_DIR@@:lib64:g" \
Lib/distutils/command/install.py \
Lib/distutils/sysconfig.py \
Lib/site.py \
Makefile.pre.in \
Modules/Setup.dist \
Modules/getpath.c \
setup.py

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 --enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-64} &&
mv -v /usr/bin/python{{Python-Version2}}{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/python &&
ln -sfv multiarch_wrapper /usr/bin/python{{Python-Version2}} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-64}.h

{{Stub-Header|pyconfig|/usr/include/python{{Python-Version2}}}}

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| pydoc, python, python{{Python-Version2}}, python-config, python{{Python-Version2}}-config, smtpd.py, and (if Tk is installed) idle
|-valign="top"
! Installed Libraries:
| libpython{{Python-Version2}}.so and various modules in /usr/lib/lib-dynload
|-valign="top"
! Installed Directories:
| /usr/include/python{{Python-Version2}}, /usr/lib/python{{Python-Version2}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! pydoc
| is a tool for reading python documentation.
|-valign="top"
! python
| is an interpreted, interactive, object-oriented programming language.
|-valign="top"
! python{{Python-Version2}}
| is a version-specific version of '''python'''.
|-valign="top"
! python-config
| is a symlink to '''python{{Python-Version2}}-config'''.
|-valign="top"
! python{{Python-Version}}-config
| ???
|-valign="top"
! smtpd.py
| is a Python implemention of the minimal SMTP protocol as defined in RFC 821.
|-valign="top"
! idle
| is an Integrated DeveLopment Environment (IDLE) for Python. It's based on Tkinter, Python's bindings to the Tk widget set.
|-valign="top"
! libpython{{Python-Version2}}.so
| ???
|}

[[Category:Programming]]

MySQL

2009-08-20T04:28:26Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.mysql.com/archives/mysql-{{MySQL-Version2}}/mysql-{{MySQL-Version}}.tar.gz
|}

----

{{Package-Introduction|MySQL is a widely used and fast SQL database server. It is a client/server implementation that consists of a server daemon and many different client programs and libraries.|http://www.mysql.com/}}

== Dependencies ==

=== Optional ===
* [[OpenSSL]]
* [[TCP Wrappers]]

== MySQL User/Group ==

groupadd -g 40 mysql &&
useradd -c "MySQL Server" -d /dev/null -g mysql -s /bin/false -u 40 mysql

== Configure options ==

You can pass '''--with-mysqld-ldflags=-all-static''' configure option if You don't use LDAP for groups in /etc/nsswitch.conf. According to MySQL, it brings >10% performance gain if enabled.

--with-mysqld-ldflags=-all-static

Turn Secure Connections on

--with-ssl

Use "fast" mutexes

--with-fast-mutexes

{{Note|Keep '''--with-readline''' configure option until successful build with '''--without-readline''' will reported.}}

== Non-Multilib ==

Compile the package (32Bit target):

CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1" \
./configure --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Compile the package (64Bit target):

CFLAGS="${CFLAGS} -fPIC" \
CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1 -fPIC" \
./configure --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--with-pic --with-lib-ccflags=-fPIC \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
rm -rf /tmp/mysql &&
cd /usr/lib &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
LDFLAGS="-L/usr/lib" \
CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1" \
./configure --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-32} &&
rm -rf /tmp/mysql &&
cd /usr/lib &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

=== N32 ===

Compile the package

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1" \
./configure --prefix=/usr --libdir=/usr/lib32 \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-n32} &&
rm -rf /tmp/mysql &&
cd /usr/lib32 &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

=== 64Bit ===

Compile the package

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
CFLAGS="${CFLAGS} -fPIC" \
CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1 -fPIC" \
./configure --prefix=/usr --libdir=/usr/lib64 \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--with-pic --with-lib-ccflags=-fPIC \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/mysql_config &&
rm -rf /tmp/mysql &&
cd /usr/lib64 &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

== Configuring ==

Make sure your hostname is not a "localhost"

hostname

Install default config

install -v -m644 /usr/share/mysql/my-medium.cnf /etc/my.cnf

Make convenience links for mysqlcheck multi-call binary

ln -sv mysqlcheck /usr/bin/mysqlanalyze &&
ln -sv mysqlcheck /usr/bin/mysqlrepair &&
ln -sv mysqlcheck /usr/bin/mysqloptimize

Secure the logfiles and runfiles

install -v -m755 -o mysql -g mysql -d /var/run/mysql &&
install -v -m750 -o mysql -g mysql -d /var/log/mysql &&
touch /var/log/mysql/mysql.{log,err} &&
chown mysql:mysql /var/log/mysql/mysql* &&
chmod 0660 /var/log/mysql/mysql*

Install MySQL databases

/usr/bin/mysql_install_db --user=mysql &&
chgrp -v mysql /srv/mysql{,/test,/mysql}

Start server in 'safe' mode

mysqld_safe --user=mysql 2>&1 >/dev/null &

Set password for the mysql 'root' user

mysqladmin -u root password '<new-password>'

Fill help tables

/usr/bin/mysql --user=root --password mysql < /usr/share/mysql/fill_help_tables.sql

Fill timezones

/usr/bin/mysql_tzinfo_to_sql /usr/share/zoneinfo > /tmp/mysql_tzinfo.sql &&
/usr/bin/mysql --user=root --password mysql < /tmp/mysql_tzinfo.sql

Shutdown server

mysqladmin -p shutdown

=== BootScript ===

Install the init script included in the [[bootscripts]] package:

make install-mysql

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/include/mysql, /usr/share/mysql, /usr/lib/mysql
|-valign="top"
!Installed Programs:
|mysqld_safe, mysql_install_db, msql2mysql, mysql_config, mysql_fix_privilege_tables, mysql_fix_extensions, mysql_setpermission, mysql_secure_installation, mysql_zap, mysqlaccess, mysqlbug, mysql_convert_table_format, mysql_find_rows, mysqlhotcopy, mysqldumpslow, mysql_explain_log, mysql_tableinfo, mysql_upgrade_shell, mysqld_multi, replace, comp_err, perror, resolveip, my_print_defaults, resolve_stack_dump, mysql_waitpid, innochecksum, myisamchk, myisamlog, myisampack, myisam_ftdump, mysql_tzinfo_to_sql, mysqld, mysql, mysqladmin, mysqlcheck, mysqlshow, mysqldump, mysqlimport, mysqltest, mysqlbinlog, mysql_upgrade, mysqltestmanagerc, mysqltestmanager-pwgen, mysql_client_test, mysqltest_embedded, mysqltestmanager, mysqlmanager
|-valign="top"
!Installed Libraries:
|libmystrings.a, libmysys.a, libdbug.a, libmyisam.a, libmyisammrg.a, libheap.a, libvio.a, libmysqlclient_r.{a,la,so}, libmysqlclient.{a,la,so}, libmysqld.a
|}

[[Category:Servers]]

TCP Wrappers

2009-08-20T02:27:20Z

Devilsclaw:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://ftp.uni-erlangen.de/debian-ipv6/pool/ipv6/tcp-wrappers/tcp-wrappers_{{TCP_Wrappers-Version}}.orig.tar.gz
|-valign="top"
!Download Patch:
| http://svn.cross-lfs.org/svn/repos/patches/tcp_wrappers/tcp_wrappers-{{TCP_Wrappers-Version2}}-ipv6-1.patch
|-
|}

----

{{Package-Introduction|TCP Wrapper is a host-based network ACL system, used to filter network access to Internet protocol services run on Unix-like operating systems.|ftp://ftp.porcupine.org/pub/security/index.html. Updated to support ipv6 through debian port.}}

== Configuration Information ==

{{Note|TCP Wrapper does use DESTDIR. However, it fails to create the necessary directories for it and so <i>make install</i> fails when using DESTDIR. You need to create the necessary directories prior to installation.}}

install -dv <DESTDIR>/lib (or lib{32} or lib{64})
install -dv <DESTDIR>/usr/include
install -dv <DESTDIR>/usr/lib (or lib{32} or lib{64})
install -dv <DESTDIR>/usr/sbin
install -dv <DESTDIR>/usr/share/man/man{3,5,8}

== Non-Multilib ==

Configure and compile the package:

patch -Np1 -i ../tcp_wrappers-{{TCP_Wrappers-Version2}}-ipv6-1.patch &&
sed -i "s,^extern char \*malloc();,/* & */," scaffold.c &&
sed -i "s/ln -s/ln -sf/" Makefile &&
make REAL_DAEMON_DIR=/usr/sbin STYLE=-DPROCESS_OPTIONS linux

Install the package:

make install

== Multilib ==

=== 32Bit ===

Configure and compile the package:

patch -Np1 -i ../tcp_wrappers-{{TCP_Wrappers-Version2}}-ipv6-1.patch &&
sed -i "s,^extern char \*malloc();,/* & */," scaffold.c &&
sed -i "s/ln -s/ln -sf/" Makefile &&
make CC="gcc ${BUILD32}" REAL_DAEMON_DIR=/usr/sbin STYLE=-DPROCESS_OPTIONS linux

Install the package:

make install

=== N32 ===

Configure and compile the package:

patch -Np1 -i ../tcp_wrappers-{{TCP_Wrappers-Version2}}-ipv6-1.patch &&
sed -i "s,^extern char \*malloc();,/* & */," scaffold.c &&
sed -i -e "s@/lib/@/lib32/@g" Makefile &&
sed -i "s/ln -s/ln -sf/" Makefile &&
make CC="gcc ${BUILDN32}" REAL_DAEMON_DIR=/usr/sbin STYLE=-DPROCESS_OPTIONS linux

Install the package:

make install

=== 64Bit ===

Configure and compile the package:

patch -Np1 -i ../tcp_wrappers-{{TCP_Wrappers-Version2}}-ipv6-1.patch &&
sed -i "s,^extern char \*malloc();,/* & */," scaffold.c &&
sed -i -e "s@/lib/@/lib64/@g" Makefile &&
sed -i "s/ln -s/ln -sf/" Makefile &&
make CC="gcc ${BUILD64}" REAL_DAEMON_DIR=/usr/sbin STYLE=-DPROCESS_OPTIONS linux

Install the package:

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| tcpd, tcpdchk, tcpdmatch, try-from, and safe_finger
|-valign="top"
! Installed Libraries:
| libwrap.{so,a}
|-valign="top"
! Installed Directories:
| None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! tcpd
| is the main access control daemon for all Internet services, which '''inetd''' or '''xinetd''' will run instead of running the requested service daemon.
|-valign="top"
! tcpdchk
| is a tool to examine a '''tcpd''' wrapper configuration and report problems with it.
|-valign="top"
! tcpdmatch
| is used to predict how the TCP wrapper would handle a specific request for a service.
|-valign="top"
! try-from
| can be called via a remote shell command to find out if the host name and address are properly recognized.
|-valign="top"
! safe_finger
| is a wrapper for the '''finger''' utility, to provide automatic reverse name lookups.
|-valign="top"
! libwrap.{so,a}
| contains the API functions required by the TCP Wrapper programs as well as other programs to become “TCP Wrapper-aware”.
|}

[[Category:General Libs]]