CBLFS - User contributions [en]

Template:MPlayer-Blue-Version

2012-01-01T05:03:18Z

Gcb: old version no longer available - bumped rev

1.8

Fcron

2011-07-10T00:48:58Z

Gcb: update download link (previous repo closed)

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
! Download Source:
| http://fcron.free.fr/archives/fcron-{{Fcron Version}}.src.tar.gz
|}

----

{{Package-Introduction|Fcron is a periodical command scheduler which aims at replacing [[Vixie-Cron]], so it implements most of its functionalities. However, unlike Vixie Cron, Fcron does not assume that your system is running either all the time or regularly. You can, for instance, tell Fcron to execute tasks every x hours y minutes of system up time or to do a job only once in a specified interval of time. Fcron has also many more features: you can also set a nice value to a job, run it depending on the system load average, and much more.|http://fcron.free.fr/}}

== Dependencies ==

=== Optional ===
* [[Linux-PAM]]
* [[SELinux]]

== Creating the fcron User/Group ==

We need to create the fcron group and the fcron user to run '''fcron''':

groupadd -g 24 fcron &&
useradd -c "Fcron User" -d /dev/null -u 24 -g fcron -s /bin/false fcron

== Configuration Information ==

{|
|''--with-editor=PATH'': Set the default editor for fcron. Without this flag, Fcron assumes '''vi'''.
|-
|''--with-run-non-privileged=no'': This is used if you want to run '''fcron''' as an unprivleged user. You need to look at [http://fcron.free.fr/doc/en/faq.html Fcron's FAQ] if you want to do this.
|-
|''--with-dsssl-dir=/usr/share/sgml/docbook/dsssl-stylesheets-{{DocBook DSSSL StyleSheets-Version}}'': Pass this to build the DocBook documentation. This path assumes that you followed the CBLFS instructions for installing the [[DocBook DSSSL StyleSheets]].
|}

{{Note|Fcron uses ''DESTDIR'', but has a problem with [[Linux-PAM]]. If you haven't installed [[Linux-PAM]], then you can ignore the rest of this note.

The script that determines whether you are you using the /etc/pam.conf or the /etc/pam.d scheme for [[Linux-PAM]] configuration checks whether or not /etc/pam.d exists. If it does, then it assumes that you're using the /etc/pam.d scheme. If it doesn't, then it assumes that you're using the /etc/pam.conf scheme. This works fine unless you're using ''DESTDIR''. The script fails to take ''DESTDIR'' into account. As such, it goes looking for <DESTDIR>/etc/pam.d and naturally doesn't find it.

So, if you're using ''DESTDIR'', then it will '''always''' decide that you're using the /etc/pam.conf scheme. If you '''are''' using that scheme, then everythings fine. However if you're using the /etc/pam.d scheme, then you need to execute the following command prior to running '''make install''':

install -dv <DESTDIR>/etc/pam.d

This simple fix makes it so that Fcron's script detects that you're using the /etc/pam.d scheme. With this, ''DESTDIR'' works as expected.}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var --with-boot-install=no \
--without-sendmail &&
make

Install the package:

make install

=== Command Explanations ===

''--without-sendmail'': This stops Fcron from e-mailing you the results of the '''fcron'' script.

''--with-boot-install=no'': This prevents the installation of the package's bootscript.

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr \
--sysconfdir=/etc --localstatedir=/var \
--with-boot-install=no --without-sendmail &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr \
--sysconfdir=/etc --localstatedir=/var \
--with-boot-install=no --without-sendmail &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr \
--sysconfdir=/etc --localstatedir=/var \
--with-boot-install=no --without-sendmail &&
make

Install the package:

make install

== Configuring ==

=== Configuration Files ===

The files /etc/fcron.conf, /etc/fcron.allow, and /etc/fcron.deny are used to configure fcron behavior.

=== Configuration Information ===

'''fcrontab''' is used to write '''fcron''' scripts. Refer to the man pages for more information.

If [[Linux-PAM]] was installed, then two PAM configuration files were installed in /etc/pam.d. However, if there is no /etc/pam.d and you are using /etc/pam.conf instead, then corresponding configuration sections were added to your pam.conf file instead.

=== Logging Fcron Messages ===

If you want to Fcron to log its messages, then you need to add it to /etc/syslog.conf.

<pre>
cat >> /etc/rsyslog.d/fcron.conf << "EOF"
# Log Fcron
cron.* -/var/log/cron.log

# End /etc/rsyslog.d/fcron.conf
EOF
</pre>

In order to bring our changes into effect, we need to reload the '''rsyslog''' daemon:

/etc/rc.d/init.d/rsyslog reload

=== Boot Script ===

[[Bootscripts]] has a boot script for Fcron. Install it as follows:

make install-fcron

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| fcron, fcrondyn, fcronsighup, fcrontab
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directory:
| /usr/share/doc/fcron-{{Fcron Version}}, /var/spool/fcron
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! fcron
| is a daemon to execute scheduled tasks.
|-valign="top"
! fcrondyn
| is a user tool intended to interact with a running fcron daemon. It can, for instance, list user's jobs loaded by fcron, run one of them, renice a running job, send a signal to a running job, etc.
|-valign="top"
! fcronsighup
| is the program used by '''fcrontab''' to tell '''fcron''' it should reload its configuration.
|-valign="top"
! fcrontab
| is the program intended to install, edit, list and remove the tables used by '''fcron''' daemon. As '''fcron''' internally uses a non-human readable format (this is needed because '''fcron''' saves more informations than the user gives, for example the time and date of next execution), the user cannot directly edit their fcrontab (the one used by '''fcron''').
|}

[[Category:General Utilities]]

LVM2

2011-07-05T11:17:32Z

Gcb: update download link

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://sources.redhat.com/pub/lvm2/releases/LVM2.{{Device-lvm2-Version}}.tgz
|}

----

{{Package-Introduction|Logical Volume Manager v2 is the updated version of LVM which supports +256 volumes and +2TB logical size.|http://sourceware.org/lvm2/}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --enable-cmdlib -enable-fsadm \
--enable-dmeventd --disable-selinux &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --mandir=/usr/share/man \
--enable-cmdlib --enable-fsadm \
--enable-dmeventd --disable-selinux &&
make

Install the package:

make install

=== N32 ===

Compile the package:

sed -i "/usrlibdir/s:/lib:&32:" configure &&
CC="gcc ${BUILDN32}" ./configure --mandir=/usr/share/man \
--enable-cmdlib --enable-fsadm \
--enable-dmeventd --libdir=/lib32 \
--disable-selinux &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

sed -i "/usrlibdir/s:/lib:&64:" configure &&
CC="gcc ${BUILD64}" ./configure --libdir=/lib64 \
--mandir=/usr/share/man --enable-dmeventd \
--enable-cmdlib --enable-fsadm \
--enable-dmeventd --disable-selinux &&
make

Install the package:

make install

== Confuration ==

=== Bootscript ===

The following bootscript is only needed in a very specific situation, If you use an initramfs or some other early userspace to initialize lvm2 device nodes. This script only runs '''vgscan --mknodes''' and reports the status of the command on start. If you need this functionality, install the bootscript with the following command:

cat > /etc/rc.d/init.d/lvm2 << "EOF"
#!/bin/bash
########################################################################
# Begin $rc_base/init.d/lvm2
#
# Description : Creates lvm2 nodes that may have been created in an
# early userspace.
#
# Authors : Joe Ciccone <jciccone@gmail.com>
#
# Version : 00.01
#
# Notes :
#
########################################################################

. /etc/sysconfig/rc
. ${rc_functions}

case "${1}" in
start)
boot_mesg "Running vgscan mknodes..."
/sbin/vgscan --mknodes
evaluate_retval
;;
*)
echo "Usage: ${0} {start}"
exit 1
;;
esac

# End $rc_base/init.d/lvm2
EOF
chmod 751 /etc/rc.d/init.d/lvm2
ln -s ../init.d/lvm2 /etc/rc.d/rcsysinit.d/S16lvm2

[[Category:Block Device]]

Shadow

2011-07-05T01:04:49Z

Gcb: update download link

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://pkg-shadow.alioth.debian.org/releases/shadow-{{Shadow-Version}}.tar.bz2
|}

{{Blank-Package-Introduction}}

== Dependencies ==

=== Optional ===
* [[Cracklib]]
* [[PAM Library]]
* [[libaudit]]
* [[libskey]]
* [[SELinux]]

== Configuration Information ==

If you have not installed [[PAM Library]], then use this flag instead of ''--with-libpam'' in the instructions below.

--without-libpam

If you have not installed [[Cracklib]], then remove this flag from the instructions below.

--with-libcrack

== Non-Multilib ==

Configure and compile the package:

./configure --libdir=/lib --sysconfdir=/etc --enable-shared \
--without-audit --without-selinux --with-libcrack --with-libpam &&
sed -i 's/groups$(EXEEXT) //' src/Makefile &&
find man -name Makefile -exec sed -i '/groups.1.xml/d' '{}' \; &&
find man -name Makefile -exec sed -i 's/groups.1 //' '{}' \; &&
make

Install the package:

make install &&
mv -v /usr/bin/passwd /bin

== Multilib ==

=== 64Bit ===

CC="gcc ${BUILD64}" ./configure --libdir=/lib64 --sysconfdir=/etc --enable-shared \
--without-audit --without-selinux --with-libcrack --with-libpam &&
sed -i 's/groups$(EXEEXT) //' src/Makefile &&
find man -name Makefile -exec sed -i '/groups.1.xml/d' '{}' \; &&
find man -name Makefile -exec sed -i 's/groups.1 //' '{}' \; &&
make

Install the package:

make install &&
mv -v /usr/bin/passwd /bin

== Configuring ==

=== login.defs ===

Setup Configuration files:

cp etc/login.defs /etc/login.defs
sed -i -e 's@#MD5_CRYPT_ENAB.no@MD5_CRYPT_ENAB yes@' \
-e 's@/var/spool/mail@/var/mail@' \
-e 's@DICTPATH.*@DICTPATH\t/lib/cracklib/pw_dict@' /etc/login.defs

FUNCTIONS="LASTLOG_ENAB MAIL_CHECK_ENAB PORTTIME_CHECKS_ENAB CONSOLE MOTD_FILE
NOLOGINS_FILE PASS_MIN_LEN SU_WHEEL_ONLY MD5_CRYPT_ENAB CONSOLE_GROUPS
ENVIRON_FILE ULIMIT ENV_TZ ENV_HZ ENV_SUPATH ENV_PATH QMAIL_DIR MAIL_DIR
MAIL_FILE CHFN_AUTH FAILLOG_ENAB QUOTAS_ENAB FTMP_FILE OBSCURE_CHECKS_ENAB
CRACKLIB_DICTPATH PASS_CHANGE_TRIES PASS_ALWAYS"
for function in $FUNCTIONS; do
sed -i "s/^$function/# &/" /etc/login.defs
done

=== [[Linux-PAM]] Services ===

==== /etc/pam.d/login ====

This is the file that controls the login program

cat > /etc/pam.d/login << "EOF"
#%PAM-1.0
#
# The common PAM configuration file for login
#
auth required pam_shells.so
auth include system-auth
auth optional pam_securetty.so

account required pam_nologin.so
account include system-auth

password include system-auth

session include system-auth
session required pam_mkhomedir.so skel=/etc/skel/ umask=0022
session optional pam_lastlog.so nowtmp
session optional pam_mail.so dir=/var/mail standard
EOF

Also make sure '''/etc/shells''' exists because the '''pam_shells.so''' module will only permit a login if your users login shell appears in '''/etc/shells'''.

==== /etc/pam.d/{chage chfn chgpasswd chpasswd chsh groupadd groupdel groupmems groupmod newusers passwd useradd userdel usermod} ====

These are the files that control changing of a password

for file in chage chfn chgpasswd chpasswd chsh groupadd groupdel groupmems \
groupmod newusers passwd useradd userdel usermod; do
cat > /etc/pam.d/$file << "EOF"
#%PAM-1.0
#
# The common PAM configuration file authentication only, root ok
#
auth sufficient pam_rootok.so

account required pam_permit.so
account include system-auth

password include system-auth
EOF
done

==== /etc/pam.d/su ====

This is the file that controls su access

cat > /etc/pam.d/su << "EOF"
#%PAM-1.0
#
# The common PAM configuration file for su
#
auth sufficient pam_rootok.so
auth include system-auth

account include system-auth

password include system-auth

session include system-auth
session optional pam_xauth.so
EOF

=== Where to go? ===

See [[Configuring for Adding Users]]

==Contents==

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
|login, su, nologin, faillog, lastlog, chage, chfn, chsh, expiry, gpasswd, newgrp, passwd, chgpasswd, chpasswd, groupadd, groupdel, groupmems, groupmod, grpck, grpconv, grpunconv, logoutd, newusers, pwck, pwconv, pwunconv, useradd, userdel, usermod, vipw
|-valign="top"
! Installed Libraries:
|
|-valign="top"
! Installed Directories:
| /etc/pam.d
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! expiry
| Checks and enforces the current password expiration policy
|-valign="top"
! faillog
| Is used to examine the log of login failures, to set a maximum number of failures before an account is blocked, or to reset the failure count
|-valign="top"
! gpasswd
| Is used to add and delete members and administrators to groups
|-valign="top"
! groupadd
| Creates a group with the given name
|-valign="top"
! groupdel
| Deletes the group with the given name
|-valign="top"
! groupmod
| Is used to modify the given group's name or GID
|-valign="top"
! grpck
| Verifies the integrity of the group files /etc/group and /etc/gshadow
|-valign="top"
! grpconv
| Creates or updates the shadow group file from the normal group file
|-valign="top"
! grpunconv
| Updates /etc/group from /etc/gshadow and then deletes the latter
|-valign="top"
! lastlog
| Reports the most recent login of all users or of a given user
|-valign="top"
! login
| Is used by the system to let users sign on
|-valign="top"
! logoutd
| Is a daemon used to enforce restrictions on log-on time and ports
|-valign="top"
! newgrp
| Is used to change the current GID during a login session
|-valign="top"
! newusers
| Is used to create or update an entire series of user accounts
|-valign="top"
! nologin
| Displays a message that an account is not available. Designed to be used as the default shell for accounts that have been disabled
|-valign="top"
! passwd
| Is used to change the password for a user or group account
|-valign="top"
! pwck
| Verifies the integrity of the password files /etc/passwd and /etc/shadow
|-valign="top"
! pwconv
| Creates or updates the shadow password file from the normal password file
|-valign="top"
! pwunconv
| Updates /etc/passwd from /etc/shadow and then deletes the latter
|-valign="top"
! sg
| Executes a given command while the user's GID is set to that of the given group
|-valign="top"
! su
| Runs a shell with substitute user and group IDs
|-valign="top"
! useradd
| Creates a new user with the given name, or updates the default new-user information
|-valign="top"
! userdel
| Deletes the given user account
|-valign="top"
! usermod
| Is used to modify the given user's login name, User Identification (UID), shell, initial group, home directory, etc.
|-valign="top"
! vigr
| Edits the /etc/group or /etc/gshadow files
|-valign="top"
! vipw
| Edits the /etc/passwd or /etc/shadow files
|}

Usbutils

2011-07-05T00:32:53Z

Gcb: update download link

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.kernel.org/pub/linux/utils/usb/usbutils/usbutils-{{Usbutils-Version}}.tar.bz2
|}

----

{{Package-Introduction||http://www.linux-usb.org/}}

== Dependencies ==

=== Required ===
* [[libusb]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 update-usbids.sh /usr/sbin/update-usbids

== Multilib ==

'''''This package does not provide any libraries so only one installation is needed.'''''

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" ./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 update-usbids.sh /usr/sbin/update-usbids

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| lsusb and update-usbids
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! lsusb
| is a utility for displaying information about all USB buses in the system and all devices connected to them.
|-valign="top"
! update-usbids
| downloads the current version of the USB ID list. Requires [[Wget]] or [[Lynx]].
|}

[[Category:General Utilities]]

Little cms

2011-07-04T11:22:05Z

Gcb: update download link

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://sourceforge.net/projects/lcms/files/lcms/1.19/lcms-{{Little cms-Version}}.tar.gz/download
|}

----

{{Package-Introduction|Little cms is a small-footprint, speed optimized, color management engine in open source form.|http://www.littlecms.com/}}

== Dependencies ==

=== Optional ===
*[[LibTIFF]]
*[[libjpeg]]
*[[Python]] (with [[SWIG]] installed)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/lcms-{{Little cms-Version}} &&
install -v -m644 README.1ST doc/* /usr/share/doc/lcms-{{Little cms-Version}}

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===
Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/lcms-{{Little cms-Version}} &&
install -v -m644 README.1ST doc/* /usr/share/doc/lcms-{{Little cms-Version}}

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| icc2ps, icclink, icctrans, wtpt and optionally, jpegicc, tiffdiff and tifficc
|-valign="top"
! Installed Libraries:
| liblcms.{so,a} and the optional _lcms.so Python module
|-valign="top"
! Installed Directories:
| /usr/share/doc/lcms-{{Little cms-Version}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! icc2ps
| generates PostScript CRD or CSA from ICC profiles.
|-valign="top"
! icclink
| links two or more profiles into a single device link profile.
|-valign="top"
! icctrans
| is a color space conversion calculator.
|-valign="top"
! jpegicc
| is an ICC profile applier for JPEG files.
|-valign="top"
! tifficc
| is an ICC profile applier for TIFF files.
|-valign="top"
! wtpt
| shows media white of profiles, identifying black body locus.
|-valign="top"
! liblcms.{so,a}
| is used by the lcms programs as well as other programs to provide color management facilities.
|}

[[Category:Graphics Libraries]]

Netcat

2010-04-28T17:41:59Z

Gcb: update download URL

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://sourceforge.net/projects/netcat/files/netcat/0.7.1/netcat-0.7.1.tar.gz/download
|}

----

{{Package-Introduction|Netcat is a featured networking utility which reads and writes data across network connections, using the TCP/IP protocol.|}}

{{Note|Within the context of netcat distribution (gnu,unlicensed,etc.), netcat fails to work properly if the binary relationships are heterogeneous}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

'''''This package does not provide any libraries so only one installation is needed.'''''

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install

== Content ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|None
|-valign="top"
!Installed Programs:
|nc, netcat
|-valign="top"
!Installed Libraries:
|None
|}

[[Category:Network Applications]]

Postfix

2010-04-28T11:12:03Z

Gcb: update download URL

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.porcupine.org/mirrors/postfix-release/official/postfix-{{Postfix-Version}}.tar.gz
|}

----

{{Package-Introduction|The Postfix package contains a Mail Transport Agent.|http://www.postfix.org/}}

== Dependencies ==

=== Optional ===

* [[Pcre]]
* [[MySQL]]
* [[PostgreSQL]]
* [[OpenLDAP]]
* [[OpenSSL]]
* [[CyrusSASL]]
* [[cdb]] or [[TinyCDB]]

== Creating the Postfix User & Group ==

groupadd -g 33 postfix &&
groupadd -g 34 postdrop &&
useradd -c "Postfix Daemon User" -d /dev/null -g postfix \
-s /bin/false -u 33 postfix &&
chown -v postfix:postfix /var/mail

== Non-Multilib ==

{{Postfix-Configuration}}

Create the Makefiles and compile the package:

make makefiles CCARGS="${CCARGS}" AUXLIBS="${AUXLIBS}" &&
make

Install the package

sh postfix-install -non-interactive

== Multilib ==

=== 64Bit ===

{{Postfix-Configuration|libdir=lib64}}

Create the Makefiles and compile the package:

make makefiles CCARGS="-m64 ${CCARGS}" AUXLIBS="${AUXLIBS}" &&
make

Install the package

sh postfix-install -non-interactive

== Configuration ==

=== Bootscript ===

Install the init script included in the [[Bootscripts]] package.

make install-postfix

[[Category:Non-GUI Clients]]

Template:Postfix-Version

2010-04-28T11:10:06Z

Gcb:

2.5.10

MadWifi

2010-04-23T03:10:45Z

Gcb: update links to correct domainname change

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://madwifi-project.org/svn/madwifi/trunk
|-
|
| http://snapshots.madwifi-project.org/madwifi-0.9.4-current.tar.gz
|}

----

{{Package-Introduction|MadWifi is short for Multiband Atheros Driver for Wireless Fidelity. In other words: this project provides a Linux kernel device driver for Atheros-based Wireless LAN devices. The driver works such that your WLAN card will appear as a normal network interface in the system. Additionally there is support for the Wireless Extensions API. This allows you to configure the device using common wireless tools (ifconfig, iwconfig and friends).[http://madwifi.org/wiki/MadWifi]|http://madwifi.org/wiki/MadWifi}}

== Getting the source ==

If you have [[Subversion]] installed issue the following command to download the source:

svn checkout http://madwifi-project.org/svn/madwifi/trunk madwifi

You may also want to create a tarball to use at a later time:

tar cvjpf madwifi-r$(svnversion madwifi).tar.bz2 madwifi

== Dependencies ==

=== Required ===
* [[Subversion]] (To Get Source)
* Kernel Source

== Non-Running Kernel ==

If you're attempting to build Madwifi for a kernel that's not currently running, also pass the following to '''make''' and '''make install'''.

KERNELPATH=/path/to/kernel/source

'''KERNELPATH''' defaults to '''/lib/modules/`uname -r`/build'''.

== Non-Multilib ==

Compile the package:

make

Install the package

make BINDIR=/usr/bin MANDIR=/usr/share/man install

== Multilib ==

=== 64Bit ===

Compile the package:

make CC="gcc ${BUILD64}"

Install the package

make BINDIR=/usr/bin MANDIR=/usr/share/man install

[[Category:Network Drivers]]

Bluez

2010-04-22T16:12:47Z

Gcb: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.kernel.org/pub/linux/bluetooth/bluez-{{Bluez-Version}}.tar.gz
|}

----

{{Package-Introduction|Bluez is an implementation of the Bluetooth™ wireless standards specifications for Linux|http://www.bluez.org/}}

== Dependencies ==

=== Optional ===
* [[D-BUS]]
* [[Glib2]]
* [[ALSA]]
* [[GStreamer]]
* [[libusb]]
* [[libsndfile]]
* [[Libnl]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
USE_ARCH=32 ./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
USE_ARCH=n32 ./configure --prefix=/usr --sysconfdir=/etc \
--libdir=/usr/lib32 --localstatedir=/var &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
USE_ARCH=64 ./configure --prefix=/usr --sysconfdir=/etc \
--libdir=/usr/lib64 --localstatedir=/var &&
make

Install the package

make install

[[Category:Network Utilities]]

Template:Libsndfile-Version

2010-04-22T15:46:26Z

Gcb:

1.0.21

KDE4/KdePimLibs

2010-04-22T15:34:34Z

Gcb: /* Required */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| {{KDE4-Mirror}}kdepimlibs-{{KDE4-Version}}.tar.bz2
|}

== Dependencies ==

=== Required ===
* [[KDE4/KdeLibs]]
* [[Akonadi]]
* [[Boost]]
* [[GPGME]]
* [[CyrusSASL]]
* [[Libical]]

=== Optional ===
* [[OpenLDAP]]

== Non-Multilib ==

Compile the package:

mkdir -v build &&
cd build &&
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} \
-DSYSCONF_INSTALL_DIR=/etc/kde \
-DLIB_INSTALL_DIR=/opt/kde4/lib \
-DCMAKE_BUILD_TYPE=Release \
-DLIB_SUFFIX= \
.. &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

mkdir -v build &&
cd build &&
USE_ARCH=32 PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} \
-DSYSCONF_INSTALL_DIR=/etc/kde \
-DLIB_INSTALL_DIR=/opt/kde4/lib \
-DCMAKE_BUILD_TYPE=Release \
-DLIB_SUFFIX= \
.. &&
make

If kdepimlibs fails "which it has done to me(oppiz) on several builds" let it error out with the ld lib64 type error. Start with clean source, run the cmake command above then switch to the below to make and make install. This is not proper and should not be done. It needs to be fixed and the problem located.

for file in $( find ./ -name *link.txt );
do
sed -i 's:/lib64:/lib:g' $file ;
done
make

for file in $( find ./ -name cmake_install.cmake );
do
sed -i 's:/lib64:/lib:g' $file ;
done
make install

Install the Package

make install

=== N32 ===

=== 64Bit ===

Compile the package:

mkdir -v build &&
cd build &&
USE_ARCH=64 PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} \
-DSYSCONF_INSTALL_DIR=/etc/kde \
-DLIB_INSTALL_DIR=/opt/kde4/lib64 \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_C_FLAGS="${BUILD64}" \
-DCMAKE_CXX_FLAGS="${BUILD64}" \
-DLIB_SUFFIX=64 \
.. &&
make

Install the Package

make install

Template:ImageMagick-Version

2010-04-22T02:17:40Z

Gcb:

{{ImageMagick-Version2}}-4

Template:ImageMagick-Version2

2010-04-22T02:16:59Z

Gcb:

6.6.1

Automoc4

2010-04-21T15:05:41Z

Gcb: /* Required */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.kde.org/pub/kde/stable/automoc4/{{Automoc4-Version}}/automoc4-{{Automoc4-Version}}.tar.bz2
|}

== Dependencies ==

=== Required ===
* [[KDE4/KDE Pre-Installation Configuration]]
* [[CMake]]
* [[OpenSSL]]

== Non-Multilib ==

Compile the package:

mkdir -v build &&
cd build &&
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} \
-DSYSCONF_INSTALL_DIR=/etc/kde \
-DLIB_INSTALL_DIR=${KDEDIR}/lib \
-DCMAKE_BUILD_TYPE=Release \
-DLIB_SUFFIX= \
.. &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

mkdir -v build &&
cd build &&
USE_ARCH=32 PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} \
-DSYSCONF_INSTALL_DIR=/etc/kde \
-DLIB_INSTALL_DIR=${KDEDIR}/lib \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_C_FLAGS="${BUILD32}" \
-DCMAKE_CXX_FLAGS="${BUILD32}" \
-DLIB_SUFFIX= \
.. &&
make

Install the Package

make install

=== N32 ===

=== 64Bit ===

mkdir -v build &&
cd build &&
USE_ARCH=64 PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
cmake -DCMAKE_INSTALL_PREFIX=${KDEDIR} \
-DSYSCONF_INSTALL_DIR=/etc/kde \
-DLIB_INSTALL_DIR=${KDEDIR}/lib64 \
-DCMAKE_BUILD_TYPE=Release \
-DCMAKE_C_FLAGS="${BUILD64}" \
-DCMAKE_CXX_FLAGS="${BUILD64}" \
-DLIB_SUFFIX=64 \
.. &&
make

Install the Package

make install

[[Category:KDE4 Support]]

Template:Perl Module URI-Version

2010-04-15T11:04:48Z

Gcb:

1.54

OpenEXR

2010-04-14T05:28:56Z

Gcb: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://download.savannah.nongnu.org/releases/openexr/openexr-{{OpenEXR-Version}}.tar.gz
|}

----

{{Package-Introduction|OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light & Magic for use in computer imaging applications.|http://www.openexr.com/}}

== Dependencies ==

=== Required ===
* [[ilmBase]]
=== Optional ===
* [[FLTK]]
* [http://developer.nvidia.com/object/cg_toolkit.html Cg Toolkit] (Configure checks for this only if [[FLTK]] is installed)

== Non-Multilib ==

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib32 &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib64 &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| exrenvmap, exrmakepreview, exrstdattr, exrmaketiled, exrheader
|-valign="top"
! Installed Libraries:
| libIlmImf.{a,la,so}
|-valign="top"
! Installed Directories:
| /usr/include/OpenEXR, /usr/share/doc/OpenEXR-{{OpenEXR-Version}}
|}

[[Category:Graphics Libraries]]

OpenEXR

2010-04-14T05:28:11Z

Gcb: /* 32Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://download.savannah.nongnu.org/releases/openexr/openexr-{{OpenEXR-Version}}.tar.gz
|}

----

{{Package-Introduction|OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light & Magic for use in computer imaging applications.|http://www.openexr.com/}}

== Dependencies ==

=== Required ===
* [[ilmBase]]
=== Optional ===
* [[FLTK]]
* [http://developer.nvidia.com/object/cg_toolkit.html Cg Toolkit] (Configure checks for this only if [[FLTK]] is installed)

== Non-Multilib ==

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib &:" configure

If you use gcc 4.3, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib32 &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib64 &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| exrenvmap, exrmakepreview, exrstdattr, exrmaketiled, exrheader
|-valign="top"
! Installed Libraries:
| libIlmImf.{a,la,so}
|-valign="top"
! Installed Directories:
| /usr/include/OpenEXR, /usr/share/doc/OpenEXR-{{OpenEXR-Version}}
|}

[[Category:Graphics Libraries]]

OpenEXR

2010-04-14T05:27:28Z

Gcb: /* N32 */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://download.savannah.nongnu.org/releases/openexr/openexr-{{OpenEXR-Version}}.tar.gz
|}

----

{{Package-Introduction|OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light & Magic for use in computer imaging applications.|http://www.openexr.com/}}

== Dependencies ==

=== Required ===
* [[ilmBase]]
=== Optional ===
* [[FLTK]]
* [http://developer.nvidia.com/object/cg_toolkit.html Cg Toolkit] (Configure checks for this only if [[FLTK]] is installed)

== Non-Multilib ==

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib &:" configure

If you use gcc 4.3, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib &:" configure

If you use gcc 4.3, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib32 &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib64 &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| exrenvmap, exrmakepreview, exrstdattr, exrmaketiled, exrheader
|-valign="top"
! Installed Libraries:
| libIlmImf.{a,la,so}
|-valign="top"
! Installed Directories:
| /usr/include/OpenEXR, /usr/share/doc/OpenEXR-{{OpenEXR-Version}}
|}

[[Category:Graphics Libraries]]

OpenEXR

2010-04-14T05:26:31Z

Gcb: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://download.savannah.nongnu.org/releases/openexr/openexr-{{OpenEXR-Version}}.tar.gz
|}

----

{{Package-Introduction|OpenEXR is a high dynamic-range (HDR) image file format developed by Industrial Light & Magic for use in computer imaging applications.|http://www.openexr.com/}}

== Dependencies ==

=== Required ===
* [[ilmBase]]
=== Optional ===
* [[FLTK]]
* [http://developer.nvidia.com/object/cg_toolkit.html Cg Toolkit] (Configure checks for this only if [[FLTK]] is installed)

== Non-Multilib ==

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib &:" configure

If you use gcc 4.3, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib &:" configure

If you use gcc 4.3, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib32 &:" configure

If you use gcc 4.3, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

If you installed an [[X Window System]] to any prefix other then /usr. Run the following sed to make sure configure can find -lGL:

sed -i "s:-lGL:-L${XORG_PREFIX}/lib64 &:" configure

If you use gcc 4.3 or gcc 4.4, run:

sed -i "49i\#include <string.h>" exrmaketiled/main.cpp
sed -i "48i\#include <string.h>" exrenvmap/main.cpp

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| exrenvmap, exrmakepreview, exrstdattr, exrmaketiled, exrheader
|-valign="top"
! Installed Libraries:
| libIlmImf.{a,la,so}
|-valign="top"
! Installed Directories:
| /usr/include/OpenEXR, /usr/share/doc/OpenEXR-{{OpenEXR-Version}}
|}

[[Category:Graphics Libraries]]

Qt3

2010-04-13T23:46:23Z

Gcb: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.trolltech.com/qt/source/qt-x11-free-{{Qt3-Version}}b.tar.gz
|}

----

{{Package-Introduction|Qt is a comprehensive development framework that includes an extensive array of features, capabilities and tools that enable development of high-performance, cross-platform rich-client and server-side applications. Qt is the GUI framework on which [[KDE3]] is built and Qt3 is the version of Qt that [[KDE3]] uses. You can of course use Qt for non-[[KDE3]] applications as well, but if you wish to use [[KDE3]] or any [[KDE3]]-based applications, you must have Qt installed on your system.|http://www.trolltech.com/products/qt/qt3}}

== Dependencies ==

=== Required ===
* [[X Window System]]
* [[libjpeg]]
* [[libmng]]

=== Optional ===
* [[MySQL]]
* [[NAS]]
* [[CUPS]]
* [[PostgreSQL]]
* [[unixODBC]]
* [[SQLite]]
* [[Firebird]]

== Configuration Information ==

{|style="text-align: left;"
|-
|''-qt-sql-mysql'': to compile with [[MySQL]] support.
|-
|''-system-nas-sound'': to compile with [[NAS]] support.
|}

If you would like to compile with [[MySQL]] support, in addition to passing the switch above, execute this sed before compiling:

sed -i "s@mysql.h@mysql/mysql.h@g" src/sql/drivers/mysql/qsql_mysql.h

{{Note|Qt3 does not use ''DESTDIR'', it uses ''INSTALL_ROOT'' for the same purpose. Use ''INSTALL_ROOT'' as you would normally use ''DESTDIR''.}}

= Installing Qt3 in /usr =

If you want to install Qt3 in /usr, these are in the instructions to do so. If you want to install it in /opt, the instructions are below.

== Non-Multilib ==

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&

./configure -prefix /usr \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/share/qt \
-plugindir /usr/lib/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g" &&
make &&
exit

Install the package:

make install &&
cp -Rv doc/man /usr/share &&
cp -Rv examples /usr/share/doc/qt &&
ln -v -sf libqt-mt.so /usr/lib/libqt.so &&
install -dv /usr/share/qt &&
ln -v -snf ../../bin /usr/share/qt/bin &&
ln -v -snf ../../include/qt /usr/share/qt/include &&
ln -v -snf ../../lib /usr/share/qt/lib

=== Command Explanations ===

''find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g"'': This command removes the harcoding of /usr/lib in a number of files.

== Multilib ==

=== 32Bit ===

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export QMAKESPEC=linux-g++-32 &&

./configure -prefix /usr \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/lib/qt \
-plugindir /usr/lib/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g" &&
make &&
exit

Install the package:

make install &&
mv -v /usr/bin/qmake{,-32} &&
mv -v /usr/bin/uic{,-32} &&
mv -v /usr/bin/moc{,-32} &&
mv -v /usr/bin/qtconfig{,-32} &&
mv -v /usr/include/qt/qconfig{,-32}.h &&
install -dv /usr/share/qt &&
ln -v -snf ../../bin /usr/share/qt/bin &&
ln -v -snf ../../include/qt /usr/share/qt/include &&
ln -v -snf ../../lib /usr/share/qt/lib
ln -svf libqt-mt.so /usr/lib/libqt.so

=== N32 ===

''TODO....''

=== 64Bit ===

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Fix a known issue with QTSPEC linux-g++-64:

sed -i "/^QMAKE_LIBDIR_QT/s:/lib:&64:" mkspecs/linux-g++-64/qmake.conf

Compile the package:

bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export QMAKESPEC=linux-g++-64 &&

./configure -prefix /usr \
-libdir /usr/lib64 \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/lib64/qt \
-plugindir /usr/lib64/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib64@@g" &&
make &&
exit

Install the package:

make install &&
cp -Rv doc/man /usr/share &&
cp -Rv examples /usr/share/doc/qt &&
mv -v /usr/bin/qmake{,-64} &&
mv -v /usr/bin/uic{,-64} &&
mv -v /usr/bin/moc{,-64} &&
mv -v /usr/bin/qtconfig{,-64} &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/qmake &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/uic &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/moc &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/qtconfig &&
mv -v /usr/include/qt/qconfig{,-64}.h &&
install -dv /usr/share/qt &&
ln -v -snf ../../bin /usr/share/qt/bin &&
ln -v -snf ../../include/qt /usr/share/qt/include &&
ln -v -snf ../../lib64 /usr/share/qt/lib64
ln -svf libqt-mt.so /usr/lib64/libqt.so

Create a qconfig.h header file which selects the actual architecture-dependent qconfig-{32,64}.h header file:

{{Stub-Header|qconfig|/usr/include}}

== Configuring ==

=== profile.d/20-qt.sh ===

If you're using the setup defined in [[Bash Startup Files]] then run the following commands. If you're not using the setup defined in [[Bash Startup Files]] make sure that your enviornment is setup correctly.

==== Non-Multilib and Multilib ====

Note that this file isn't really necessary in most cases since /usr is already in the search path, but there are a few packages that care about QTDIR and some of the packages in CBLFS have instructions that include QTDIR, so creating this file means that those instructions should work correctly without any modification.

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/usr/share/qt

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

=== ld.so.conf ===

There is no need to update ld.so.conf when installing Qt3 in /usr.

= Installing Qt3 in /opt =

== Non-Multilib ==

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&

./configure -prefix /opt/qt-{{Qt3-Version}} \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
ln -svfn qt-{{Qt3-Version}} /opt/qt &&
ln -sv libqt-mt.so /opt/qt-{{Qt3-Version}}/lib/libqt.so &&
cp -Rv doc/man /opt/qt-{{Qt3-Version}}/doc &&
cp -Rv examples /opt/qt-{{Qt3-Version}}/doc

== Multilib ==

=== 32Bit ===

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&
export QMAKESPEC=linux-g++-32 &&

./configure -prefix /opt/qt-{{Qt3-Version}} \
-datadir /opt/qt-{{Qt3-Version}}/lib \
-plugindir /opt/qt-{{Qt3-Version}}/lib/plugin \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qmake{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/uic{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/moc{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qtconfig{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/include/qconfig{,-32}.h &&
ln -sv libqt-mt.so /opt/qt-{{Qt3-Version}}/lib/libqt.so

=== N32 ===

''TODO....''

=== 64Bit ===

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Fix a known issue with QTSPEC linux-g++-64:

sed -i "/^QMAKE_LIBDIR_QT/s:/lib:&64:" mkspecs/linux-g++-64/qmake.conf

Compile the package

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&
export QMAKESPEC=linux-g++-64 &&

./configure -prefix /opt/qt-{{Qt3-Version}} \
-libdir /opt/qt-{{Qt3-Version}}/lib64 \
-datadir /opt/qt-{{Qt3-Version}}/lib64 \
-plugindir /opt/qt-{{Qt3-Version}}/lib64/plugin \
-L/usr/lib64 \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qmake{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/uic{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/moc{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qtconfig{,-64} &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/qmake &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/uic &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/moc &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/qtconfig &&
mv -v /opt/qt-{{Qt3-Version}}/include/qconfig{,-64}.h &&
ln -sv libqt-mt.so /opt/qt-{{Qt3-Version}}/lib64/libqt.so &&
cp -Rv doc/man /opt/qt-{{Qt3-Version}}/doc &&
cp -Rv examples /opt/qt-{{Qt3-Version}}/doc &&
ln -svfn qt-{{Qt3-Version}} /opt/qt

{{Stub-Header|qconfig|/opt/qt/include}}

== Configuring ==

=== profile.d/20-qt.sh ===

If you're using the setup defined in [[Bash Startup Files]] then run the following commands. If you're not using the setup defined in [[Bash Startup Files]] make sure that your enviornment is setup correctly.

==== Non-Multilib ====

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/opt/qt

export PATH="${PATH}:${QTDIR}/bin"

export PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH+:}${QTDIR}/lib/pkgconfig"

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

==== Multilib ====

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/opt/qt

export PATH="${PATH}:${QTDIR}/bin"

export PKG_CONFIG_PATH32="${PKG_CONFIG_PATH32}${PKG_CONFIG_PATH32+:}${QTDIR}/lib/pkgconfig"
export PKG_CONFIG_PATHN32="${PKG_CONFIG_PATHN32}${PKG_CONFIG_PATHN32+:}${QTDIR}/lib32/pkgconfig"
export PKG_CONFIG_PATH64="${PKG_CONFIG_PATH64}${PKG_CONFIG_PATH64+:}${QTDIR}/lib64/pkgconfig"

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

=== ld.so.conf ===

==== Non-Multilib ====

cat >> /etc/ld.so.conf << "EOF" &&
# Begin qt addition to /etc/ld.so.conf

/opt/qt/lib

# End qt addition
EOF
ldconfig

==== Multilib ====

cat >> /etc/ld.so.conf << "EOF" &&
# Begin qt addition to /etc/ld.so.conf

/opt/qt/lib
/opt/qt/lib32
/opt/qt/lib64

# End qt addition
EOF
ldconfig

[[Category:X Libs]]

Qt3

2010-04-13T23:43:47Z

Gcb: /* 32Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.trolltech.com/qt/source/qt-x11-free-{{Qt3-Version}}b.tar.gz
|}

----

{{Package-Introduction|Qt is a comprehensive development framework that includes an extensive array of features, capabilities and tools that enable development of high-performance, cross-platform rich-client and server-side applications. Qt is the GUI framework on which [[KDE3]] is built and Qt3 is the version of Qt that [[KDE3]] uses. You can of course use Qt for non-[[KDE3]] applications as well, but if you wish to use [[KDE3]] or any [[KDE3]]-based applications, you must have Qt installed on your system.|http://www.trolltech.com/products/qt/qt3}}

== Dependencies ==

=== Required ===
* [[X Window System]]
* [[libjpeg]]
* [[libmng]]

=== Optional ===
* [[MySQL]]
* [[NAS]]
* [[CUPS]]
* [[PostgreSQL]]
* [[unixODBC]]
* [[SQLite]]
* [[Firebird]]

== Configuration Information ==

{|style="text-align: left;"
|-
|''-qt-sql-mysql'': to compile with [[MySQL]] support.
|-
|''-system-nas-sound'': to compile with [[NAS]] support.
|}

If you would like to compile with [[MySQL]] support, in addition to passing the switch above, execute this sed before compiling:

sed -i "s@mysql.h@mysql/mysql.h@g" src/sql/drivers/mysql/qsql_mysql.h

{{Note|Qt3 does not use ''DESTDIR'', it uses ''INSTALL_ROOT'' for the same purpose. Use ''INSTALL_ROOT'' as you would normally use ''DESTDIR''.}}

= Installing Qt3 in /usr =

If you want to install Qt3 in /usr, these are in the instructions to do so. If you want to install it in /opt, the instructions are below.

== Non-Multilib ==

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&

./configure -prefix /usr \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/share/qt \
-plugindir /usr/lib/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g" &&
make &&
exit

Install the package:

make install &&
cp -Rv doc/man /usr/share &&
cp -Rv examples /usr/share/doc/qt &&
ln -v -sf libqt-mt.so /usr/lib/libqt.so &&
install -dv /usr/share/qt &&
ln -v -snf ../../bin /usr/share/qt/bin &&
ln -v -snf ../../include/qt /usr/share/qt/include &&
ln -v -snf ../../lib /usr/share/qt/lib

=== Command Explanations ===

''find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g"'': This command removes the harcoding of /usr/lib in a number of files.

== Multilib ==

=== 32Bit ===

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export QMAKESPEC=linux-g++-32 &&

./configure -prefix /usr \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/lib/qt \
-plugindir /usr/lib/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g" &&
make &&
exit

Install the package:

make install &&
mv -v /usr/bin/qmake{,-32} &&
mv -v /usr/bin/uic{,-32} &&
mv -v /usr/bin/moc{,-32} &&
mv -v /usr/bin/qtconfig{,-32} &&
mv -v /usr/include/qt/qconfig{,-32}.h &&
install -dv /usr/share/qt &&
ln -v -snf ../../bin /usr/share/qt/bin &&
ln -v -snf ../../include/qt /usr/share/qt/include &&
ln -v -snf ../../lib /usr/share/qt/lib
ln -svf libqt-mt.so /usr/lib/libqt.so

=== N32 ===

''TODO....''

=== 64Bit ===

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Fix a known issue with QTSPEC linux-g++-64:

sed -i "/^QMAKE_LIBDIR_QT/s:/lib:&64:" mkspecs/linux-g++-64/qmake.conf

Compile the package:

bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export QMAKESPEC=linux-g++-64 &&

./configure -prefix /usr \
-libdir /usr/lib64 \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/lib64/qt \
-plugindir /usr/lib64/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib64@@g" &&
make &&
exit

Install the package:

make install &&
cp -Rv doc/man /usr/share &&
cp -Rv examples /usr/share/doc/qt &&
mv -v /usr/bin/qmake{,-64} &&
mv -v /usr/bin/uic{,-64} &&
mv -v /usr/bin/moc{,-64} &&
mv -v /usr/bin/qtconfig{,-64} &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/qmake &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/uic &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/moc &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/qtconfig &&
mv -v /usr/include/qconfig{,-64}.h &&
install -dv /usr/share/qt &&
ln -v -snf ../../bin /usr/share/qt/bin &&
ln -v -snf ../../include/qt /usr/share/qt/include &&
ln -v -snf ../../lib64 /usr/share/qt/lib64
ln -svf libqt-mt.so /usr/lib64/libqt.so

Create a qconfig.h header file which selects the actual architecture-dependent qconfig-{32,64}.h header file:

{{Stub-Header|qconfig|/usr/include}}

== Configuring ==

=== profile.d/20-qt.sh ===

If you're using the setup defined in [[Bash Startup Files]] then run the following commands. If you're not using the setup defined in [[Bash Startup Files]] make sure that your enviornment is setup correctly.

==== Non-Multilib and Multilib ====

Note that this file isn't really necessary in most cases since /usr is already in the search path, but there are a few packages that care about QTDIR and some of the packages in CBLFS have instructions that include QTDIR, so creating this file means that those instructions should work correctly without any modification.

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/usr/share/qt

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

=== ld.so.conf ===

There is no need to update ld.so.conf when installing Qt3 in /usr.

= Installing Qt3 in /opt =

== Non-Multilib ==

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&

./configure -prefix /opt/qt-{{Qt3-Version}} \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
ln -svfn qt-{{Qt3-Version}} /opt/qt &&
ln -sv libqt-mt.so /opt/qt-{{Qt3-Version}}/lib/libqt.so &&
cp -Rv doc/man /opt/qt-{{Qt3-Version}}/doc &&
cp -Rv examples /opt/qt-{{Qt3-Version}}/doc

== Multilib ==

=== 32Bit ===

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&
export QMAKESPEC=linux-g++-32 &&

./configure -prefix /opt/qt-{{Qt3-Version}} \
-datadir /opt/qt-{{Qt3-Version}}/lib \
-plugindir /opt/qt-{{Qt3-Version}}/lib/plugin \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qmake{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/uic{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/moc{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qtconfig{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/include/qconfig{,-32}.h &&
ln -sv libqt-mt.so /opt/qt-{{Qt3-Version}}/lib/libqt.so

=== N32 ===

''TODO....''

=== 64Bit ===

If your [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Fix a known issue with QTSPEC linux-g++-64:

sed -i "/^QMAKE_LIBDIR_QT/s:/lib:&64:" mkspecs/linux-g++-64/qmake.conf

Compile the package

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&
export QMAKESPEC=linux-g++-64 &&

./configure -prefix /opt/qt-{{Qt3-Version}} \
-libdir /opt/qt-{{Qt3-Version}}/lib64 \
-datadir /opt/qt-{{Qt3-Version}}/lib64 \
-plugindir /opt/qt-{{Qt3-Version}}/lib64/plugin \
-L/usr/lib64 \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qmake{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/uic{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/moc{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qtconfig{,-64} &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/qmake &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/uic &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/moc &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/qtconfig &&
mv -v /opt/qt-{{Qt3-Version}}/include/qconfig{,-64}.h &&
ln -sv libqt-mt.so /opt/qt-{{Qt3-Version}}/lib64/libqt.so &&
cp -Rv doc/man /opt/qt-{{Qt3-Version}}/doc &&
cp -Rv examples /opt/qt-{{Qt3-Version}}/doc &&
ln -svfn qt-{{Qt3-Version}} /opt/qt

{{Stub-Header|qconfig|/opt/qt/include}}

== Configuring ==

=== profile.d/20-qt.sh ===

If you're using the setup defined in [[Bash Startup Files]] then run the following commands. If you're not using the setup defined in [[Bash Startup Files]] make sure that your enviornment is setup correctly.

==== Non-Multilib ====

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/opt/qt

export PATH="${PATH}:${QTDIR}/bin"

export PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH+:}${QTDIR}/lib/pkgconfig"

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

==== Multilib ====

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/opt/qt

export PATH="${PATH}:${QTDIR}/bin"

export PKG_CONFIG_PATH32="${PKG_CONFIG_PATH32}${PKG_CONFIG_PATH32+:}${QTDIR}/lib/pkgconfig"
export PKG_CONFIG_PATHN32="${PKG_CONFIG_PATHN32}${PKG_CONFIG_PATHN32+:}${QTDIR}/lib32/pkgconfig"
export PKG_CONFIG_PATH64="${PKG_CONFIG_PATH64}${PKG_CONFIG_PATH64+:}${QTDIR}/lib64/pkgconfig"

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

=== ld.so.conf ===

==== Non-Multilib ====

cat >> /etc/ld.so.conf << "EOF" &&
# Begin qt addition to /etc/ld.so.conf

/opt/qt/lib

# End qt addition
EOF
ldconfig

==== Multilib ====

cat >> /etc/ld.so.conf << "EOF" &&
# Begin qt addition to /etc/ld.so.conf

/opt/qt/lib
/opt/qt/lib32
/opt/qt/lib64

# End qt addition
EOF
ldconfig

[[Category:X Libs]]

FFmpeg

2010-04-13T12:47:23Z

Gcb: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ffmpeg.org/releases/ffmpeg-export-snapshot.tar.bz2
|}

----

{{Package-Introduction|FFmpeg is a solution to record, convert and stream audio and video. It is a very fast video and audio converter and it can also acquire from a live audio/video source. Designed to be intuitive, the command-line interface ('''ffmpeg''') tries to figure out all the parameters, when possible. FFmpeg can also convert from any sample rate to any other, and resize video on the fly with a high quality polyphase filter. FFmpeg can use a video4linux compatible video source and any Open Sound System audio source.|http://ffmpeg.org/}}

== Dependencies ==

=== Recommended ===
* [[X Window System]]
* [[FAAC]]
* [[FAAD2]]
* [[LAME]]
* [[Speex]]
* [[Theora]]
* [[libvorbis]]
* [[x264]]
* [[XviD]]

=== Optional ===
* [[libdc1394]] ( --enable-libdc1394 )
* [[gsm]] ( --enable-libgsm )
* [[libnut]] ( --enable-libnut )
* [[Schroedinger]] ( --enable-libschroedinger )
* [[OpenJPEG]] ( --enable-libopenjpeg )
* [[OpenCORE-AMR]] ( --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-version3 )

== Configuring ==

Look at the output of '''./configure --help''' and add the parameters for the optional dependencies you have installed.

The following is a list of options you may want to pass:

--enable-libfaac --enable-libfaad \
--enable-libmp3lame --enable-libspeex \
--enable-libtheora --enable-libvorbis \
--enable-libx264 --enable-libxvid

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-shared \
--enable-pthreads --enable-gpl \
--enable-postproc --enable-x11grab \
--enable-nonfree &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CFLAGS="${BUILD32} -fno-PIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-32} &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CFLAGS="${BUILDN32} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--{,sh}libdir=/usr/lib32 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-n32} &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CFLAGS="${BUILD64} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD64}" \
--{,sh}libdir=/usr/lib64 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/ffmpeg &&
unset USE_ARCH

== Contents ==

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|/usr/lib/vhook, /usr/include/ffmpeg
|-valign="top"
!Installed Programs:
|ffmpeg, ffserver
|-valign="top"
!Installed Libraries:
|libavcodec.so, libavformat.so,
|-valign="top"
!Symlinks:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!ffmpeg
|is a hyper fast audio and video encoder.
|-valign="top"
!ffserver
|is a hyper fast multi format audio and video streaming server.
|-valign="top"
!libavcodec
|is a library containing all the FFmpeg audio/video encoders and decoders.
|-valign="top"
!libavformat
|is a library containing parsers and generators for all common audio/video formats.
|}

[[Category:Media Libraries]]

FFmpeg

2010-04-13T11:42:26Z

Gcb: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ffmpeg.org/releases/ffmpeg-export-snapshot.tar.bz2
|}

----

{{Package-Introduction|FFmpeg is a solution to record, convert and stream audio and video. It is a very fast video and audio converter and it can also acquire from a live audio/video source. Designed to be intuitive, the command-line interface ('''ffmpeg''') tries to figure out all the parameters, when possible. FFmpeg can also convert from any sample rate to any other, and resize video on the fly with a high quality polyphase filter. FFmpeg can use a video4linux compatible video source and any Open Sound System audio source.|http://ffmpeg.org/}}

== Dependencies ==

=== Recommended ===
* [[X Window System]]
* [[FAAC]]
* [[FAAD2]]
* [[LAME]]
* [[Speex]]
* [[Theora]]
* [[libvorbis]]
* [[x264]]
* [[XviD]]

=== Optional ===
* [[libdc1394]] ( --enable-libdc1394 )
* [[gsm]] ( --enable-libgsm )
* [[libnut]] ( --enable-libnut )
* [[Schroedinger]] ( --enable-libschroedinger )
* [[OpenJPEG]] ( --enable-libopenjpeg )
* [[OpenCORE-AMR]] ( --enable-libopencore-amrnb --enable-libopencore-amrwb )

== Configuring ==

Look at the output of '''./configure --help''' and add the parameters for the optional dependencies you have installed.

The following is a list of options you may want to pass:

--enable-libfaac --enable-libfaad \
--enable-libmp3lame --enable-libspeex \
--enable-libtheora --enable-libvorbis \
--enable-libx264 --enable-libxvid

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-shared \
--enable-pthreads --enable-gpl \
--enable-postproc --enable-x11grab \
--enable-nonfree &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CFLAGS="${BUILD32} -fno-PIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-32} &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CFLAGS="${BUILDN32} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--{,sh}libdir=/usr/lib32 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-n32} &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CFLAGS="${BUILD64} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD64}" \
--{,sh}libdir=/usr/lib64 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/ffmpeg &&
unset USE_ARCH

== Contents ==

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|/usr/lib/vhook, /usr/include/ffmpeg
|-valign="top"
!Installed Programs:
|ffmpeg, ffserver
|-valign="top"
!Installed Libraries:
|libavcodec.so, libavformat.so,
|-valign="top"
!Symlinks:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!ffmpeg
|is a hyper fast audio and video encoder.
|-valign="top"
!ffserver
|is a hyper fast multi format audio and video streaming server.
|-valign="top"
!libavcodec
|is a library containing all the FFmpeg audio/video encoders and decoders.
|-valign="top"
!libavformat
|is a library containing parsers and generators for all common audio/video formats.
|}

[[Category:Media Libraries]]

OpenCORE-AMR

2010-04-13T11:33:38Z

Gcb: Created page with 'Library of OpenCORE Framework implementation of Adaptive Multi Rate Narrowband and Wideband speech codec'

Library of OpenCORE Framework implementation of Adaptive Multi Rate Narrowband and Wideband speech codec

FFmpeg

2010-04-13T11:24:10Z

Gcb: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ffmpeg.org/releases/ffmpeg-export-snapshot.tar.bz2
|}

----

{{Package-Introduction|FFmpeg is a solution to record, convert and stream audio and video. It is a very fast video and audio converter and it can also acquire from a live audio/video source. Designed to be intuitive, the command-line interface ('''ffmpeg''') tries to figure out all the parameters, when possible. FFmpeg can also convert from any sample rate to any other, and resize video on the fly with a high quality polyphase filter. FFmpeg can use a video4linux compatible video source and any Open Sound System audio source.|http://ffmpeg.org/}}

== Dependencies ==

=== Recommended ===
* [[X Window System]]
* [[FAAC]]
* [[FAAD2]]
* [[LAME]]
* [[Speex]]
* [[Theora]]
* [[libvorbis]]
* [[x264]]
* [[XviD]]

=== Optional ===
* [[libdc1394]] ( --enable-libdc1394 )
* [[gsm]] ( --enable-libgsm )
* [[libnut]] ( --enable-libnut )
* [[Schroedinger]] ( --enable-libschroedinger )
* [[OpenJPEG]] ( --enable-libopenjpeg )

== Configuring ==

Look at the output of '''./configure --help''' and add the parameters for the optional dependencies you have installed.

The following is a list of options you may want to pass:

--enable-libfaac --enable-libfaad \
--enable-libmp3lame --enable-libspeex \
--enable-libtheora --enable-libvorbis \
--enable-libx264 --enable-libxvid

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-shared \
--enable-pthreads --enable-gpl \
--enable-postproc --enable-x11grab \
--enable-nonfree &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CFLAGS="${BUILD32} -fno-PIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-32} &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CFLAGS="${BUILDN32} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--{,sh}libdir=/usr/lib32 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-n32} &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CFLAGS="${BUILD64} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD64}" \
--{,sh}libdir=/usr/lib64 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/ffmpeg &&
unset USE_ARCH

== Contents ==

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|/usr/lib/vhook, /usr/include/ffmpeg
|-valign="top"
!Installed Programs:
|ffmpeg, ffserver
|-valign="top"
!Installed Libraries:
|libavcodec.so, libavformat.so,
|-valign="top"
!Symlinks:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!ffmpeg
|is a hyper fast audio and video encoder.
|-valign="top"
!ffserver
|is a hyper fast multi format audio and video streaming server.
|-valign="top"
!libavcodec
|is a library containing all the FFmpeg audio/video encoders and decoders.
|-valign="top"
!libavformat
|is a library containing parsers and generators for all common audio/video formats.
|}

[[Category:Media Libraries]]

FFmpeg

2010-04-13T11:21:38Z

Gcb: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ffmpeg.org/releases/ffmpeg-export-snapshot.tar.bz2
|}

----

{{Package-Introduction|FFmpeg is a solution to record, convert and stream audio and video. It is a very fast video and audio converter and it can also acquire from a live audio/video source. Designed to be intuitive, the command-line interface ('''ffmpeg''') tries to figure out all the parameters, when possible. FFmpeg can also convert from any sample rate to any other, and resize video on the fly with a high quality polyphase filter. FFmpeg can use a video4linux compatible video source and any Open Sound System audio source.|http://ffmpeg.org/}}

== Dependencies ==

=== Recommended ===
* [[X Window System]]
* [[FAAC]]
* [[FAAD2]]
* [[LAME]]
* [[Speex]]
* [[Theora]]
* [[libvorbis]]
* [[x264]]
* [[XviD]]

=== Optional ===
* [[libdc1394]] ( --enable-libdc1394 )
* [[gsm]] ( --enable-libgsm )
* [[libnut]] ( --enable-libnut )
* [[Schrodinger]] ( --enable-libschroedinger )
* [[OpenJPEG]] ( --enable-libopenjpeg )

== Configuring ==

Look at the output of '''./configure --help''' and add the parameters for the optional dependencies you have installed.

The following is a list of options you may want to pass:

--enable-libfaac --enable-libfaad \
--enable-libmp3lame --enable-libspeex \
--enable-libtheora --enable-libvorbis \
--enable-libx264 --enable-libxvid

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-shared \
--enable-pthreads --enable-gpl \
--enable-postproc --enable-x11grab \
--enable-nonfree &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CFLAGS="${BUILD32} -fno-PIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-32} &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CFLAGS="${BUILDN32} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--{,sh}libdir=/usr/lib32 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-n32} &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CFLAGS="${BUILD64} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD64}" \
--{,sh}libdir=/usr/lib64 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/ffmpeg &&
unset USE_ARCH

== Contents ==

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|/usr/lib/vhook, /usr/include/ffmpeg
|-valign="top"
!Installed Programs:
|ffmpeg, ffserver
|-valign="top"
!Installed Libraries:
|libavcodec.so, libavformat.so,
|-valign="top"
!Symlinks:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!ffmpeg
|is a hyper fast audio and video encoder.
|-valign="top"
!ffserver
|is a hyper fast multi format audio and video streaming server.
|-valign="top"
!libavcodec
|is a library containing all the FFmpeg audio/video encoders and decoders.
|-valign="top"
!libavformat
|is a library containing parsers and generators for all common audio/video formats.
|}

[[Category:Media Libraries]]

FFmpeg

2010-04-13T11:16:06Z

Gcb: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ffmpeg.org/releases/ffmpeg-export-snapshot.tar.bz2
|}

----

{{Package-Introduction|FFmpeg is a solution to record, convert and stream audio and video. It is a very fast video and audio converter and it can also acquire from a live audio/video source. Designed to be intuitive, the command-line interface ('''ffmpeg''') tries to figure out all the parameters, when possible. FFmpeg can also convert from any sample rate to any other, and resize video on the fly with a high quality polyphase filter. FFmpeg can use a video4linux compatible video source and any Open Sound System audio source.|http://ffmpeg.org/}}

== Dependencies ==

=== Recommended ===
* [[X Window System]]
* [[FAAC]]
* [[FAAD2]]
* [[LAME]]
* [[Speex]]
* [[Theora]]
* [[libvorbis]]
* [[x264]]
* [[XviD]]

=== Optional ===
* [[libdc1394]] ( --enable-libdc1394 )
* [[gsm]] ( --enable-libgsm )
* [[libnut]] ( --enable-libnut )
* [[schrodinger]] ( --enable-libschroedinger )
* [[OpenJPEG]] ( --enable-libopenjpeg )

== Configuring ==

Look at the output of '''./configure --help''' and add the parameters for the optional dependencies you have installed.

The following is a list of options you may want to pass:

--enable-libfaac --enable-libfaad \
--enable-libmp3lame --enable-libspeex \
--enable-libtheora --enable-libvorbis \
--enable-libx264 --enable-libxvid

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-shared \
--enable-pthreads --enable-gpl \
--enable-postproc --enable-x11grab \
--enable-nonfree &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CFLAGS="${BUILD32} -fno-PIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-32} &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CFLAGS="${BUILDN32} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD32}" \
--{,sh}libdir=/usr/lib32 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-n32} &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CFLAGS="${BUILD64} -fPIC" \
./configure --prefix=/usr --cc="gcc ${BUILD64}" \
--{,sh}libdir=/usr/lib64 \
--enable-shared --enable-pthreads \
--enable-gpl --enable-postproc \
--enable-x11grab --enable-nonfree &&
make

Install the package

make install &&
mv -v /usr/bin/ffmpeg{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/ffmpeg &&
unset USE_ARCH

== Contents ==

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|/usr/lib/vhook, /usr/include/ffmpeg
|-valign="top"
!Installed Programs:
|ffmpeg, ffserver
|-valign="top"
!Installed Libraries:
|libavcodec.so, libavformat.so,
|-valign="top"
!Symlinks:
|None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!ffmpeg
|is a hyper fast audio and video encoder.
|-valign="top"
!ffserver
|is a hyper fast multi format audio and video streaming server.
|-valign="top"
!libavcodec
|is a library containing all the FFmpeg audio/video encoders and decoders.
|-valign="top"
!libavformat
|is a library containing parsers and generators for all common audio/video formats.
|}

[[Category:Media Libraries]]

X264

2010-04-13T09:43:39Z

Gcb: /* Configuration Information */ mp4 output now enabled by default, invert config option

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-{{X264-Version}}.tar.bz2
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

=== Optional ===
* [[GIT]]
* [[Subversion]]
* [[NASM]] (X86 only)
* [[Yasm]] (X86_64 only)
* [[Gtk2]] and [[Pkg-config]]
* [[Gpac]] (required to enable mp4 output)

== Configuration Information ==

{|style="text-align: left;"
|-
|--disable-mp4-output disables mp4 output (use this you do not want/have Gpac installed).
|-
|--enable-visualize enables visualization (X11 only).
|}

== Non-Multilib ==

If you have a [[X Window System]] installed and intend to pass --enable-visualize then run the following command:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" configure

Compile the package:

./configure --prefix=/usr --enable-shared --enable-pic \
--extra-cflags="-I${XORG_PREFIX-/usr}/include" &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If you have a [[X Window System]] installed and intend to pass --enable-visualize then run the following command:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" configure

Compile the package:

CC="gcc ${BUILD32}" ./configure --host=$CLFS_TARGET32 \
--prefix=/usr --enable-shared --enable-pic \
--extra-cflags="-I${XORG_PREFIX-/usr}/include" &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" make

Install the package

make install

=== N32 ===

If you have a [[X Window System]] installed and intend to pass --enable-visualize then run the following command:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" configure

Compile the package:

sed -i "s@/lib@&32@g" configure &&
CC="gcc ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 \
--enable-shared --enable-pic \
--extra-cflags="-I${XORG_PREFIX-/usr}/include" &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" make

Install the package

make install

=== 64Bit ===

If you have a [[X Window System]] installed and intend to pass --enable-visualize then run the following command:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" configure

Compile the package:

sed -i "s@/lib@&64@g" configure &&
CC="gcc ${BUILD64}" ./configure --prefix=/usr\
--libdir=/usr/lib64 \
--enable-shared --enable-pic \
--extra-cflags="-I${XORG_PREFIX-/usr}/include" &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| None
|-valign="top"
! Installed Libraries:
| libx264.{a,so}
|-valign="top"
! Installed Directory:
| None
|}

[[Category:Media Libraries]]

Template:X264-Version

2010-04-13T09:36:32Z

Gcb: update version

20100401-2245

X264

2010-04-13T09:33:50Z

Gcb: --enable-gtk configure switch no longer valid

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-{{X264-Version}}.tar.bz2
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

=== Optional ===
* [[GIT]]
* [[Subversion]]
* [[NASM]] (X86 only)
* [[Yasm]] (X86_64 only)
* [[Gtk2]] and [[Pkg-config]]
* [[Gpac]] (required to enable mp4 output)

== Configuration Information ==

{|style="text-align: left;"
|-
|--enable-mp4-output enables mp4 output.
|-
|--enable-visualize enables visualization (X11 only).
|}

== Non-Multilib ==

If you have a [[X Window System]] installed and intend to pass --enable-visualize then run the following command:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" configure

Compile the package:

./configure --prefix=/usr --enable-shared --enable-pic \
--extra-cflags="-I${XORG_PREFIX-/usr}/include" &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If you have a [[X Window System]] installed and intend to pass --enable-visualize then run the following command:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" configure

Compile the package:

CC="gcc ${BUILD32}" ./configure --host=$CLFS_TARGET32 \
--prefix=/usr --enable-shared --enable-pic \
--extra-cflags="-I${XORG_PREFIX-/usr}/include" &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" make

Install the package

make install

=== N32 ===

If you have a [[X Window System]] installed and intend to pass --enable-visualize then run the following command:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" configure

Compile the package:

sed -i "s@/lib@&32@g" configure &&
CC="gcc ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 \
--enable-shared --enable-pic \
--extra-cflags="-I${XORG_PREFIX-/usr}/include" &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" make

Install the package

make install

=== 64Bit ===

If you have a [[X Window System]] installed and intend to pass --enable-visualize then run the following command:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" configure

Compile the package:

sed -i "s@/lib@&64@g" configure &&
CC="gcc ${BUILD64}" ./configure --prefix=/usr\
--libdir=/usr/lib64 \
--enable-shared --enable-pic \
--extra-cflags="-I${XORG_PREFIX-/usr}/include" &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| None
|-valign="top"
! Installed Libraries:
| libx264.{a,so}
|-valign="top"
! Installed Directory:
| None
|}

[[Category:Media Libraries]]

WxWidgets

2010-04-13T05:04:07Z

Gcb: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://prdownloads.sourceforge.net/wxwindows/wxWidgets-{{wxWidgets-Version}}.tar.bz2
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

=== Required ===
* [[Gtk2]]

=== Optional ===
* [[libpng]]
* [[libjpeg]]
* [[LibTIFF]]
* [[X Window System]]
* [[SDL]]
* [[libgnomeprintui]]
* [[unixODBC]]
* [[libmspack]]
* [[CppUnit]]

== Configuration Information ==

The options below speak for themselves:

--with-odbc

--with-libmspack

--with-sdl

--with-gnomeprint

--enable-unicode

--enable-compat24

== Non-Multilib ==

Compile the package:

sed -i "/^SEARCH_INCLUDE=/a\ ${XORG_PREFIX}/include" configure &&
./configure --prefix=/usr &&
make

Install the package

make install

Install the ''setup'' header file that is needed by some packages:

cp include/msvc/wx/setup.h /usr/include/wx-{{wxWidgets-Version2}}/wx

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i "/^SEARCH_INCLUDE=/a\ ${XORG_PREFIX}/include" configure &&
USE_ARCH=32 CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/wx-config{,-32}

Install the ''setup'' header file that is needed by some packages:

cp include/msvc/wx/setup.h /usr/include/wx-{{wxWidgets-Version2}}/wx

=== N32 ===

Compile the package:

sed -i "/^SEARCH_INCLUDE=/a\ ${XORG_PREFIX}/include" configure &&
USE_ARCH=n32 CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/wx-config{,-n32}

Install the ''setup'' header file that is needed by some packages:

cp include/msvc/wx/setup.h /usr/include/wx-{{wxWidgets-Version2}}/wx

=== 64Bit ===

Compile the package:

sed -i "/^SEARCH_INCLUDE=/a\ ${XORG_PREFIX}/include" configure &&
USE_ARCH=64 CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/wx-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/wx-config

Install the ''setup'' header file that is needed by some packages:

cp include/msvc/wx/setup.h /usr/include/wx-{{wxWidgets-Version2}}/wx

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| wx-config wxrc wxrc-{{wxWidgets-Version2}}
|-valign="top"
! Installed Libraries:
| libwx_base-{{wxWidgets-Version2}}.so, libwx_base_net-{{wxWidgets-Version2}}.so, libwx_base_xml-{{wxWidgets-Version2}}.so, libwx_gtk2_adv-{{wxWidgets-Version2}}.so, libwx_gtk2_aui-{{wxWidgets-Version2}}.so, libwx_gtk2_core-{{wxWidgets-Version2}}.so, libwx_gtk2_dbgrid-{{wxWidgets-Version2}}.so, libwx_gtk2_html-{{wxWidgets-Version2}}.so, libwx_gtk2_qa-{{wxWidgets-Version2}}.so, libwx_gtk2_richtext-{{wxWidgets-Version2}}.so, libwx_gtk2_xrc-{{wxWidgets-Version2}}.so
|-valign="top"
! Installed Directories:
| /usr/lib/wx, /usr/include/wx-{{wxWidgets-Version2}}
|}

[[Category:X Libs]]

WxWidgets

2010-04-13T05:01:42Z

Gcb: /* Non-Multilib */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://prdownloads.sourceforge.net/wxwindows/wxWidgets-{{wxWidgets-Version}}.tar.bz2
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

=== Required ===
* [[Gtk2]]

=== Optional ===
* [[libpng]]
* [[libjpeg]]
* [[LibTIFF]]
* [[X Window System]]
* [[SDL]]
* [[libgnomeprintui]]
* [[unixODBC]]
* [[libmspack]]
* [[CppUnit]]

== Configuration Information ==

The options below speak for themselves:

--with-odbc

--with-libmspack

--with-sdl

--with-gnomeprint

--enable-unicode

--enable-compat24

== Non-Multilib ==

Compile the package:

sed -i "/^SEARCH_INCLUDE=/a\ ${XORG_PREFIX}/include" configure &&
./configure --prefix=/usr &&
make

Install the package

make install

Install the ''setup'' header file that is needed by some packages:

cp include/msvc/wx/setup.h /usr/include/wx-{{wxWidgets-Version}}/wx

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i "/^SEARCH_INCLUDE=/a\ ${XORG_PREFIX}/include" configure &&
USE_ARCH=32 CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/wx-config{,-32}

Install the ''setup'' header file that is needed by some packages:

cp include/msvc/wx/setup.h /usr/include/wx-{{wxWidgets-Version2}}/wx

=== N32 ===

Compile the package:

sed -i "/^SEARCH_INCLUDE=/a\ ${XORG_PREFIX}/include" configure &&
USE_ARCH=n32 CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/wx-config{,-n32}

Install the ''setup'' header file that is needed by some packages:

cp include/msvc/wx/setup.h /usr/include/wx-{{wxWidgets-Version2}}/wx

=== 64Bit ===

Compile the package:

sed -i "/^SEARCH_INCLUDE=/a\ ${XORG_PREFIX}/include" configure &&
USE_ARCH=64 CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/wx-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/wx-config

Install the ''setup'' header file that is needed by some packages:

cp include/msvc/wx/setup.h /usr/include/wx-{{wxWidgets-Version2}}/wx

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| wx-config wxrc wxrc-{{wxWidgets-Version2}}
|-valign="top"
! Installed Libraries:
| libwx_base-{{wxWidgets-Version2}}.so, libwx_base_net-{{wxWidgets-Version2}}.so, libwx_base_xml-{{wxWidgets-Version2}}.so, libwx_gtk2_adv-{{wxWidgets-Version2}}.so, libwx_gtk2_aui-{{wxWidgets-Version2}}.so, libwx_gtk2_core-{{wxWidgets-Version2}}.so, libwx_gtk2_dbgrid-{{wxWidgets-Version2}}.so, libwx_gtk2_html-{{wxWidgets-Version2}}.so, libwx_gtk2_qa-{{wxWidgets-Version2}}.so, libwx_gtk2_richtext-{{wxWidgets-Version2}}.so, libwx_gtk2_xrc-{{wxWidgets-Version2}}.so
|-valign="top"
! Installed Directories:
| /usr/lib/wx, /usr/include/wx-{{wxWidgets-Version2}}
|}

[[Category:X Libs]]

Template:WxWidgets-Version

2010-04-13T04:58:47Z

Gcb:

{{wxWidgets-Version2}}.0

Template:WxWidgets-Version2

2010-04-13T04:58:01Z

Gcb:

2.9

Template:Apache-Version

2010-04-13T01:42:24Z

Gcb:

2.2.15

Subversion

2010-04-13T01:22:36Z

Gcb: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://subversion.tigris.org/downloads/subversion-{{Subversion-Version}}.tar.bz2
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/subversion/subversion-{{Subversion-Version}}-build_fix-1.patch
|-
|}

----

{{Package-Introduction|The goal of the Subversion project is to build a version control system that is a compelling replacement for CVS in the open source community. At the moment, the [http://www.linuxfromscratch.org/lfs/ LFS], [http://www.linuxfromscratch.org/blfs/ BLFS], and [http://trac.cross-lfs.org CLFS] projects all use subversion to maintain their books.|http://subversion.tigris.org/}}

== Dependencies ==

=== Required ===
* [[APR]]
* [[APR-util]]
* [[Serf]]
* [[SQLite3]]

=== Optional ===
* [[Python]]
* [[Apache]] Required for mod_dav_svn
* [[JDK]]
* [[JUnit]]
* [[Dante]]
* [[Jikes]]
* [[pkg-config]]
* [[expat]] or [[libXML2]]
* [[OpenSSL]] Add --with-ssl to configure
* [[MIT krb5]] or [[Heimdal]]
* [[Berkeley DB]] or [[GDBM]] Add --with-berkeley-db or --with-gdbm to configure
* [[SWIG]]
* [[Ruby]]
* [[Neon]]

{{Note|If not using neon you may want to pass --without-neon for configure to work properly.}}

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../subversion-{{Subversion-Version}}-build_fix-1.patch &&
./configure --prefix=/usr --with-serf=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

patch -Np1 -i ../subversion-{{Subversion-Version}}-build_fix-1.patch &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 \
./configure --prefix=/usr --with-serf=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 \
./configure --prefix=/usr --with-serf=/usr \
--libdir=/usr/lib32 &&
sed -i 's@/usr/lib/@/usr/lib32/@g' Makefile &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

patch -Np1 -i ../subversion-{{Subversion-Version}}-build_fix-1.patch &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 \
./configure --prefix=/usr --with-serf=/usr \
--libdir=/usr/lib64 &&
sed -i 's@/usr/lib/@/usr/lib64/@g' Makefile &&
make

Install the package

make install

=== Install Documents ===

Install the documents

find doc -type d -exec chmod 755 {} \; &&
find doc -type f -exec chmod 644 {} \; &&
install -v -m755 -d /usr/share/doc/subversion-{{Subversion-Version}} &&
cp -v -R doc/* /usr/share/doc/subversion-{{Subversion-Version}}

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| svn, svnadmin, svndumpfilter, svnlook, svnserve, and svnversion
|-valign="top"
! Installed Libraries:
| libsvn*.{so,a} and optionally, mod_dav_svn.so, and mod_authz_svn.so Apache HTTP DSO modules
|-valign="top"
! Installed Directories:
| /etc/subversion, /usr/include/subversion-1, /usr/lib/perl5/site_perl/5.8.8/i686-linux/auto/SVN (optional), /usr/lib/perl5/site_perl/5.8.8/i686-linux/SVN (optional), /usr/lib/svn-javahl (optional), /usr/lib/svn-python and /usr/share/doc/subversion-{{Subversion-Version}}
|}

=== Short Description ===

{| style="text-align: left;"
! svn
| is a command-line client program used to access Subversion repositories.
|-valign="top"
! svnadmin
| is a tool for creating, tweaking or repairing a Subversion repository.
|-valign="top"
! svndumpfilter
| is a program for filtering Subversion repository dumpfile format streams.
|-valign="top"
! svnlook
| is a tool for inspecting a Subversion repository.
|-valign="top"
! svnserve
| is a custom standalone server program, able to run as a daemon process or invoked by SSH.
|-valign="top"
! svnversion
| is used to report the version number and state of a working Subversion repository copy.
|-valign="top"
! libsvn_*.{so,a}
| are the support libraries used by the Subversion programs.
|-valign="top"
|-valign="top"
! mod_authz_svn.so
| is a plug-in module for the Apache HTTP server, used to authenticate users to a Subversion repository over the Internet or an intranet.
|-valign="top"
! mod_dav_svn.so
| is a plug-in module for the Apache HTTP server, used to make a Subversion repository available to others over the Internet or an intranet.
|}

[[Category:Source Code Management]]

Subversion

2010-04-13T01:22:01Z

Gcb: /* Optional */

GnuTLS

2010-04-13T01:04:23Z

Gcb: /* 64Bit */ now uses pkgconfig

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.gnutls.org/pub/gnutls/gnutls-{{GnuTLS-Version}}.tar.bz2
|}

----

{{Package-Introduction|According to the TLS protocol specification, "The TLS protocol provides communications privacy over the Internet. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery." GnuTLS aims to develop a library which provides a secure layer, over a reliable transport layer. Currently the GnuTLS library implements the proposed standards by the IETF's TLS working group.|http://www.gnu.org/software/gnutls/}}

== Dependencies ==

=== Required ===
* [[libGCrypt]]
* [[Pkg-config]]

=== Optional ===
* [[Dmalloc]]
* [[DUMA]]
* [[Gtk-Doc]]
* [[OpenCDK]] (Included)
* [[LibtASN1]] (Included)
* [[libcfg]]
* [[libfc]]
* [[LZO2]]
* [[valgrind]]
* [[Guile]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
unset USE_ARCH

= Contents =

{| style="text-align: left;"
|-
! Installed Programs:
| libgnutls-config, libgnutls-extra-config, gnutls-serv, gnutls-cli, psktool, gnutls-cli-debug, certtool, srptool
|-
! Installed Libraries:
| libgnutls.{a,la,so}, libgnutlsxx.{a,la,so}, libgnutls-extra.{a,la,so}, libgnutls-openssl.{a,la,so}
|-
! Installed Directories:
| /usr/include/gnutls
|}

[[Category:General Libs]]

GnuTLS

2010-04-13T00:56:13Z

Gcb: /* N32 */ now uses pkgconfig

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.gnutls.org/pub/gnutls/gnutls-{{GnuTLS-Version}}.tar.bz2
|}

----

{{Package-Introduction|According to the TLS protocol specification, "The TLS protocol provides communications privacy over the Internet. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery." GnuTLS aims to develop a library which provides a secure layer, over a reliable transport layer. Currently the GnuTLS library implements the proposed standards by the IETF's TLS working group.|http://www.gnu.org/software/gnutls/}}

== Dependencies ==

=== Required ===
* [[libGCrypt]]
* [[Pkg-config]]

=== Optional ===
* [[Dmalloc]]
* [[DUMA]]
* [[Gtk-Doc]]
* [[OpenCDK]] (Included)
* [[LibtASN1]] (Included)
* [[libcfg]]
* [[libfc]]
* [[LZO2]]
* [[valgrind]]
* [[Guile]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/libgnutls-config{,-64} &&
mv -v /usr/bin/libgnutls-extra-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/libgnutls-config &&
ln -sfv multiarch_wrapper /usr/bin/libgnutls-extra-config &&
unset USE_ARCH

= Contents =

{| style="text-align: left;"
|-
! Installed Programs:
| libgnutls-config, libgnutls-extra-config, gnutls-serv, gnutls-cli, psktool, gnutls-cli-debug, certtool, srptool
|-
! Installed Libraries:
| libgnutls.{a,la,so}, libgnutlsxx.{a,la,so}, libgnutls-extra.{a,la,so}, libgnutls-openssl.{a,la,so}
|-
! Installed Directories:
| /usr/include/gnutls
|}

[[Category:General Libs]]

GnuTLS

2010-04-13T00:52:59Z

Gcb: /* 32Bit */ now uses pkgconfig

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.gnutls.org/pub/gnutls/gnutls-{{GnuTLS-Version}}.tar.bz2
|}

----

{{Package-Introduction|According to the TLS protocol specification, "The TLS protocol provides communications privacy over the Internet. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery." GnuTLS aims to develop a library which provides a secure layer, over a reliable transport layer. Currently the GnuTLS library implements the proposed standards by the IETF's TLS working group.|http://www.gnu.org/software/gnutls/}}

== Dependencies ==

=== Required ===
* [[libGCrypt]]
* [[Pkg-config]]

=== Optional ===
* [[Dmalloc]]
* [[DUMA]]
* [[Gtk-Doc]]
* [[OpenCDK]] (Included)
* [[LibtASN1]] (Included)
* [[libcfg]]
* [[libfc]]
* [[LZO2]]
* [[valgrind]]
* [[Guile]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/libgnutls-config{,-n32} &&
mv -v /usr/bin/libgnutls-extra-config{,-n32} &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/libgnutls-config{,-64} &&
mv -v /usr/bin/libgnutls-extra-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/libgnutls-config &&
ln -sfv multiarch_wrapper /usr/bin/libgnutls-extra-config &&
unset USE_ARCH

= Contents =

{| style="text-align: left;"
|-
! Installed Programs:
| libgnutls-config, libgnutls-extra-config, gnutls-serv, gnutls-cli, psktool, gnutls-cli-debug, certtool, srptool
|-
! Installed Libraries:
| libgnutls.{a,la,so}, libgnutlsxx.{a,la,so}, libgnutls-extra.{a,la,so}, libgnutls-openssl.{a,la,so}
|-
! Installed Directories:
| /usr/include/gnutls
|}

[[Category:General Libs]]

GnuTLS

2010-04-13T00:39:21Z

Gcb: /* Required */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.gnutls.org/pub/gnutls/gnutls-{{GnuTLS-Version}}.tar.bz2
|}

----

{{Package-Introduction|According to the TLS protocol specification, "The TLS protocol provides communications privacy over the Internet. The protocol allows client/server applications to communicate in a way that is designed to prevent eavesdropping, tampering, or message forgery." GnuTLS aims to develop a library which provides a secure layer, over a reliable transport layer. Currently the GnuTLS library implements the proposed standards by the IETF's TLS working group.|http://www.gnu.org/software/gnutls/}}

== Dependencies ==

=== Required ===
* [[libGCrypt]]
* [[Pkg-config]]

=== Optional ===
* [[Dmalloc]]
* [[DUMA]]
* [[Gtk-Doc]]
* [[OpenCDK]] (Included)
* [[LibtASN1]] (Included)
* [[libcfg]]
* [[libfc]]
* [[LZO2]]
* [[valgrind]]
* [[Guile]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/libgnutls-config{,-32} &&
mv -v /usr/bin/libgnutls-extra-config{,-32} &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/libgnutls-config{,-n32} &&
mv -v /usr/bin/libgnutls-extra-config{,-n32} &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/libgnutls-config{,-64} &&
mv -v /usr/bin/libgnutls-extra-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/libgnutls-config &&
ln -sfv multiarch_wrapper /usr/bin/libgnutls-extra-config &&
unset USE_ARCH

= Contents =

{| style="text-align: left;"
|-
! Installed Programs:
| libgnutls-config, libgnutls-extra-config, gnutls-serv, gnutls-cli, psktool, gnutls-cli-debug, certtool, srptool
|-
! Installed Libraries:
| libgnutls.{a,la,so}, libgnutlsxx.{a,la,so}, libgnutls-extra.{a,la,so}, libgnutls-openssl.{a,la,so}
|-
! Installed Directories:
| /usr/include/gnutls
|}

[[Category:General Libs]]

Template:APR-Version

2010-04-12T17:29:33Z

Gcb:

{{APR-Version2}}.3.12

XMMS

2010-04-12T15:11:24Z

Gcb: /* 64Bit */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.xmms.org/files/{{XMMS-Version2}}.x/xmms-{{XMMS-Version}}.tar.bz2
|}

----

{{Package-Introduction|XMMS is a Winamp 2 clone for the X Windows System. As such, it's an audio player that will play MP3 ([[LAME]]), Ogg Vorbis ([[libvorbis]]), [[FLAC]], and various other audio formats. It has various plugins that add additional functionality. And since it uses Winamp 2 skins, there are quite a few skins out there to choose from.

One thing to note however, is that XMMS is based on [[Gtk1]]. It is currently the only package in CBLFS that requires [[Gtk1]] (as opposed to having it as an optional dependency). It has not moved to [[Gtk2]] in order to avoid breaking compatibility with its plugins. If you wish to have a [[Gtk2]]-based audio player that is based on XMMS, then install [[Audacious]].|http://www.xmms.org/}}

== Dependencies ==

=== Required ===
* [[Gtk1]]
=== Optional ===
* [[ALSA]]
* [[EsounD]]
* [[libvorbis]]
* [[libmikmod]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" USE_ARCH=32 ./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/xmms-config{,-32}

=== N32 ===

Compile the package:

sed -i "/_LIBS=/s:/lib:&32:g" configure &&
CC="gcc ${BUILDN32}" USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 &&
sed -i -e "/sys_lib_search_path_spec/s:/lib:&32:g" \
-e "/sys_lib_dlsearch_path_spec/s:lib:&32:g" libtool &&
make

Install the package

make install &&
mv -v /usr/bin/xmms-config{,-n32}

=== 64Bit ===

Compile the package:

sed -i "/_LIBS=/s:/lib:&64:g" configure &&
CC="gcc ${BUILD64}" USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 &&
sed -i -e "/sys_lib_search_path_spec/s:/lib:&64:g" \
-e "/sys_lib_dlsearch_path_spec/s:lib:&64:g" libtool &&
make

Install the package

make install &&
mv -v /usr/bin/xmms-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/xmms-config &&
install -v -m755 -d /usr/share/doc/xmms-1.2.11 &&
install -v -m644 FAQ README /usr/share/doc/xmms-1.2.11

[[Category:Media Utilities]]

Metacity

2010-04-12T14:00:31Z

Gcb: /* Required */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ftp.gnome.org/pub/GNOME/sources/metacity/{{Metacity-Version2}}/metacity-{{Metacity-Version}}.tar.bz2
|}

----

{{Package-Introduction|The Metacity package contains a window manager. This is useful for organizing and displaying windows.|http://www.gnome.org/}}

== Dependencies ==

=== Required ===
* [[Gtk2]]
* [[Perl Module XML::Parser|XML::Parser]]
* [[Zenity]]
* [[Libcanberra]]

=== Optional ===
* [[startup-notification]]
* [[GConf]]
* [[intltool]]
* [[libcm]] (Required for composite manager support)

== Configuration Information ==

The following override default configuration options.

{|style="text-align: left"
| --disable-startup-notification: disable metacity's startup notification support
|-
|--enable-compositor: enable metacity's compositing manager. Enabling requires [[libcm]].
|-
|--disable-xsync: disable metacity's use of the XSync extension.
|-
|--disable-render: disable metacity's use of the RENDER extension.
|-
|--disable-shape: disable metacity's use of the shaped window extension.
|-
|--disable-xinerama: disable metacity's use of the Xinerama extension
|}

== Non-Multilib ==

Compile the package:

CPPFLAGS="-I${XORG_PREFIX}/include" \
./configure --prefix=/usr --sysconfdir=/etc \
--libexecdir=/usr/lib/metacity \
--with-gconf-schema-file-dir=/etc/gnome/gconf/schemas &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/metacity-{{Metacity-Version}} &&
install -v -m644 README rationales.txt doc/*.txt \
/usr/share/doc/metacity-{{Metacity-Version}}

== Multilib ==

=== 32Bit ===

Compile the package:

CPPFLAGS="-I${XORG_PREFIX}/include" \
CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr --sysconfdir=/etc \
--libexecdir=/usr/lib/metacity \
--with-gconf-schema-file-dir=/etc/gnome/gconf/schemas &&
make

Install the package

make install

=== N32 ===

Compile the package:

CPPFLAGS="-I${XORG_PREFIX}/include" \
CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib32 \
--libexecdir=/usr/lib32/metacity \
--with-gconf-schema-file-dir=/etc/gnome/gconf/schemas &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CPPFLAGS="-I${XORG_PREFIX}/include" \
CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --sysconfdir=/etc --libdir=/usr/lib64 \
--libexecdir=/usr/lib64/metacity \
--with-gconf-schema-file-dir=/etc/gnome/gconf/schemas &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/metacity-{{Metacity-Version}} &&
install -v -m644 README rationales.txt doc/*.txt \
/usr/share/doc/metacity-{{Metacity-Version}}

== Contents ==

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|None
|-valign="top"
!Installed Programs:
|metacity-message, metacity-window-demo, metacity, metacity-theme-viewer
|-valign="top"
!Installed Libraries:
|libmetacity-private.so, libmetacity-private.la, libmetacity-private.a
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!
|
|-valign="top"
!
|
|-valign="top"
!
|
|}

Xmlto

2010-04-11T09:28:01Z

Gcb: update link

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| https://fedorahosted.org/releases/x/m/xmlto/xmlto-{{Xmlto-Version}}.tar.bz2
|}

----

{{Package-Introduction|xmlto is a front-end to an XSL toolchain. It chooses an appropriate stylesheet for the conversion you want and applies it using an external XSL-T processor. It also performs any necessary post-processing.|http://cyberelk.net/tim/xmlto/}}

== Dependencies ==
=== Required ===
* [[DocBook XML DTD-4.x]]
* [[DocBook XSL Stylesheets]]
* [[libXSLT]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
!Installed Programs:
|xmlif, xmlto
|-valign="top"
!Installed Libraries:
|None
|-valign="top"
!Installed Directories:
|/usr/share/xmlto
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!xmlif
|
|-valign="top"
!xmlto
|is a program to convert XML files to various formats using XSL stylesheets.
|}

[[Category:General Utilities]]

GNOME Doc-Utils

2010-04-11T08:56:40Z

Gcb: /* Required */ As echoed by configure script. intltool >0.35 require for compilation

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/{{GNOME Doc-Utils-Version2}}/gnome-doc-utils-{{GNOME Doc-Utils-Version}}.tar.bz2
|}

----

{{Package-Introduction|GNOME Doc-Utils is a collection of documentation utilities for the Gnome project. It includes xml2po tool which makes it easier to translate and keep up to date translations of documentation.|http://live.gnome.org/GnomeDocUtils/}}

== Dependencies ==

=== Required ===
* [[LibXSLT]]
* [[Rarian]] (before it depended on [[ScrollKeeper]], but it is obsolete now)
* [[Intltool]]

=== Recommended ===
* [[Python]]
=== Optional ===
* [[Pkg-config]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --mandir=/usr/share/man &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr --mandir=/usr/share/man &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 \
--mandir=/usr/share/man &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 \
--mandir=/usr/share/man &&
make

Install the package

make install

DVDAuthor

2009-07-09T05:12:41Z

Gcb: /* Required */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/dvdauthor/dvdauthor-{{dvdauthor-Version}}.tar.gz
|}

----

{{Package-Introduction|DVDAuthor is a simple set of tools to help with authoring a DVD. It will eventually be able to create menus, buttons, and chapters, etc, but for now it takes an MPEG stream and writes it to DVD.}}

== Dependencies ==

=== Required ===
* [[cdrtools]]
* [[ImageMagick]]
* [[LibXML2]]
* [[FreeType]]
* [[Libdvdread]]

=== Optional ===
* [[Gengetopt]]
* [[FriBidi]] (required for Arabic/Hebrew subtitle text)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" USE_ARCH=n32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" USE_ARCH=64 \
./configure --prefix=/usr &&
make

Install the package:

make install

= Contents =

{|style="text-align: left"
|-valign="top"
!Installed Programs:
|dvdauthor, dvdunauthor, spumux, spuunmux, mpeg2desc, dvddirdel
|-valign="top"
!Installed Libraries:
|None
|-valign="top"
!Installed Directories:
|/usr/share/dvdauthor
|}

[[Category:CD/DVD Utilities]]

DVDAuthor

2009-07-09T05:12:03Z

Gcb: /* Optional */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/dvdauthor/dvdauthor-{{dvdauthor-Version}}.tar.gz
|}

----

{{Package-Introduction|DVDAuthor is a simple set of tools to help with authoring a DVD. It will eventually be able to create menus, buttons, and chapters, etc, but for now it takes an MPEG stream and writes it to DVD.}}

== Dependencies ==

=== Required ===
* [[cdrtools]]
* [[ImageMagick]]
* [[LibXML2]]
* [[FreeType]]
* [[FriBidi]]
* [[Libdvdread]]

=== Optional ===
* [[Gengetopt]]
* [[FriBidi]] (required for Arabic/Hebrew subtitle text)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" USE_ARCH=n32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" USE_ARCH=64 \
./configure --prefix=/usr &&
make

Install the package:

make install

= Contents =

{|style="text-align: left"
|-valign="top"
!Installed Programs:
|dvdauthor, dvdunauthor, spumux, spuunmux, mpeg2desc, dvddirdel
|-valign="top"
!Installed Libraries:
|None
|-valign="top"
!Installed Directories:
|/usr/share/dvdauthor
|}

[[Category:CD/DVD Utilities]]