CBLFS - User contributions [en]

Xfce-MCS-Manager

2007-03-05T21:00:15Z

Heybobc: MCS Manager needs to be built for each architecture that MCS Plugins is built for.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.xfce.org/archive/xfce-{{Xfce-Version}}/src/xfce-mcs-manager-{{Xfce-Version}}.tar.bz2
|}

== Introduction to Xfce-MCS-Manager ==

This is the Xfce 4 settings manager. The Xfce 4 settings manager provides access to the settings of all Xfce 4 components. This package provides dialogs to change settings for mouse behaviour, keyboard and user interface (including themes).

'''Package Homepage:''' http://www.xfce.org

== Dependencies ==

=== Required ===
* [[libxfcegui4]]
* [[libxfce4mcs]]

== Configuration Information ==

{|style="text-align: left"
|-
|--enable-loadprof: enable load profiling.
|}

== Non-Multilib ==

Compile the pacakge:

./configure --prefix=${XFCE_PREFIX} &&
make

Install the package:

make install

== Multilib ==

This package does not provide any libraries so only one installation is required.

In addition, each architecture that [[Xfce-MCS-Plugin|MCS-Plugin]] is built for, should have a corresponding MCS-Manger built.

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=${XFCE_PREFIX} &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=${XFCE_PREFIX} --libdir=${XFCE_PREFIX}/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=${XFCE_PREFIX} --libdir=${XFCE_PREFIX}/lib64 &&
make

Install the package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Directories:
| $XFCE_PREFIX/share/glib-2.0, $XFCE_PREFIX/include/xfce4/xfce-mcs-manager
|-valign="top"
! Installed Programs:
| xfce-mcs-manager
|-valign="top"
! Installed Libraries:
| None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! xfce-mcs-manager
| The multi channel MCS manager.
|}

Cdrtools

2007-03-05T19:50:12Z

Heybobc: Created doc directory

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://gd.tuwien.ac.at/utils/schilling/cdrtools/cdrtools-{{Cdrtools-Version}}.tar.bz2
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/cdrtools/cdrtools-{{Cdrtools-Version}}-ascii-2.patch
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/cdrtools/cdrtools-{{Cdrtools-Version}}-kernel_2.6-3.patch
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/cdrtools/cdrtools-{{Cdrtools-Version}}-mkisofs_iconv-1.patch
|}

----

== Introduction to Cdrtools ==

The Cdrtools package contains CD recording utilities. These are useful for reading, creating or writing (burning) Compact Discs.

== Dependencies ==

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-ascii-2.patch &&
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-kernel_2.6-3.patch &&
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-mkisofs_iconv-1.patch &&
make INS_BASE=/usr DEFINSUSR=root DEFINSGRP=root

Install the package

make INS_BASE=/usr DEFINSUSR=root DEFINSGRP=root install &&
install -v -d /usr/share/doc/cdrtools-{{Cdrtools-Version}} &&
install -v -D -m644 README* ABOUT doc/*.ps /usr/share/doc/cdrtools-{{Cdrtools-Version}}

== Multilib ==

=== 32Bit ===

Compile the package
:
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-ascii-2.patch &&
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-kernel_2.6-3.patch &&
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-mkisofs_iconv-1.patch &&
make CCOM="gcc" COPTX="${BUILD32}" LDOPTX="${BUILD32}"\
INS_BASE=/usr DEFINSUSR=root DEFINSGRP=root

Install the package

make CCOM="gcc" COPTX="${BUILD32}" LDOPTX="${BUILD32}"\
INS_BASE=/usr DEFINSUSR=root DEFINSGRP=root install &&
install -v -d /usr/share/doc/cdrtools-{{Cdrtools-Version}} &&
install -v -D -m644 README* ABOUT doc/*.ps /usr/share/doc/cdrtools-{{Cdrtools-Version}}

=== N32 ===

Compile the package:

patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-ascii-2.patch &&
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-kernel_2.6-3.patch &&
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-mkisofs_iconv-1.patch &&
(find . -name "*.mk"; find . -name Makefile) | xargs sed -i "/^INSDIR=\s*lib$/s/lib/&32/" &&
make CCOM="gcc" COPTX="${BUILDN32}" LDOPTX="${BUILDN32}"\
INS_BASE=/usr DEFINSUSR=root DEFINSGRP=root

Install the package

make CCOM="gcc" COPTX="${BUILDN32}" LDOPTX="${BUILDN32}"\
INS_BASE=/usr DEFINSUSR=root DEFINSGRP=root install &&
install -v -d /usr/share/doc/cdrtools-{{Cdrtools-Version}} &&
install -v -D -m644 README* ABOUT doc/*.ps /usr/share/doc/cdrtools-{{Cdrtools-Version}}

=== 64Bit ===

Compile the package:

patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-ascii-2.patch &&
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-kernel_2.6-3.patch &&
patch -Np1 -i ../cdrtools-{{Cdrtools-Version}}-mkisofs_iconv-1.patch &&
(find . -name "*.mk"; find . -name Makefile) | xargs sed -i "/^INSDIR=\s*lib$/s/lib/&64/" &&
make CCOM="gcc" COPTX="${BUILD64}" LDOPTX="${BUILD64}"\
INS_BASE=/usr DEFINSUSR=root DEFINSGRP=root

Install the package

make CCOM="gcc" COPTX="${BUILD64}" LDOPTX="${BUILD64}"\
INS_BASE=/usr DEFINSUSR=root DEFINSGRP=root install &&
install -v -d /usr/share/doc/cdrtools-{{Cdrtools-Version}} &&
install -v -D -m644 README* ABOUT doc/*.ps /usr/share/doc/cdrtools-{{Cdrtools-Version}}

Yasm

2007-02-18T14:58:49Z

Heybobc: Filled in list of installed components

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.tortall.net/projects/yasm/releases/yasm-{{Yasm-Version}}.tar.gz
|}

----

== Introduction to Yasm ==

Yasm is a complete rewrite of the [[NASM]] assembler under the new BSD license. It currently supports the x86 and AMD64 instruction sets, accepts [[NASM]] and GAS assembler syntaxes, outputs binary, ELF32, ELF64, COFF, Win32, and Win64 object formats, and generates source debugging information in STABS, DWARF 2, and CodeView 8 formats.

'''Project Home Page''': http://www.tortall.net/projects/yasm/

== Dependencies ==

=== Optional ===
* [[xmlto]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| yasm
|-valign="top"
! Installed Libraries:
| libyasm.a
|-valign="top"
! Installed Directories:
| ${PREFIX}/include/libyasm
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! program1
| ???
|-valign="top"
! program2
| ???
|-valign="top"
! library1.{a,la,so}
| ???
|}

D-BUS Glib

2007-02-18T14:28:11Z

Heybobc: Changed xmlto and Doxygen from Required to Optional

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Glib Binding:
| http://dbus.freedesktop.org/releases/dbus-glib/dbus-glib-{{D-BUS-Glib-Version}}.tar.gz
|-valign="top"
|}

== Dependencies ==

=== Required ===
* [[D-BUS Core]]
* [[Pkg-config]]
* [[Glib2]]
* [[expat]] or [[LibXML2]]

=== Optional ===
* [[xmlto]]
* [[Doxygen]]

== Non-Multilib ==

Compile the Package:

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var &&
make

Install the Package:

make install

== Multilib ==

=== 32Bit ===

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var &&
make

Install the Package:

make install

=== N32 ===

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 --sysconfdir=/etc \
--localstatedir=/var &&
make

Install the Package:

make install

=== 64Bit ===

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 --sysconfdir=/etc \
--localstatedir=/var &&
make

Install the Package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| dbus-binding-tool
|-valign="top"
! Installed Libraries:
| libdbus-glib-1.{so,la,a}
|-valign="top"
! Installed Directories:
| None?
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! dbus-binding-tool
| is used to create header files from GLib object files.
|}

Exo

2007-02-17T14:43:27Z

Heybobc: It seems that Python bindings are enabled by default. Add config info to disable it.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.xfce.org/archive/xfce-{{Xfce-Version}}/src/exo-{{Exo-Version}}.tar.bz2
|}

== Introduction to EXO ==

An extension library to Xfce, developed by oscillation. While Xfce comes with quite a few libraries that are targeted at desktop development, EXO is targeted at application development.

Package Homepage: http://www.xfce.org

== Dependencies ==

=== Required ===
* [[Perl Module URI|URI]]
* [[glib2]]
* [[Gtk2]]
* [[Xfce-MCS-Manager]]

=== Optional ===
* [[Python]]
* [[PyGTK]]
* [[libXSLT]]

== Configuration Information ==

{|
|--enable-python: enable Python bindings.
|-
|--disable-python: Python is enabled by default. This disables it.
|-
|--enable-xsltproc: use xsltproc to build documentation.
|-
|--enable-xml2po: use xml2po to translate documentation.
|-
|--disable-mcs-plugins: disable checking for MCS manager.
|-
|--enable-gtk-doc: enable Gtk Doc.
|}

== Non-Multilib ==

Compile the package:

./configure --prefix=${XFCE_PREFIX} --sysconfdir=/etc/xfce \
--libexecdir=${XFCE_PREFIX}/lib/xfce4 &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

USE_ARCH=32 CC="gcc ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=${XFCE_PREFIX} --sysconfdir=/etc/xfce \
--libexecdir=${XFCE_PREFIX}/lib/xfce4 &&
make

Install the package:

make install

=== N32 ===

Compile the package:

USE_ARCH=N32 CC="gcc ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=${XFCE_PREFIX} --sysconfdir=/etc/xfce \
--libdir=${XFCE_PREFIX}/lib32 --libexecdir=${XFCE_PREFIX}/lib32/xfce4 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

USE_ARCH=64 CC="gcc ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=${XFCE_PREFIX} --sysconfdir=/etc/xfce \
--libdir=${XFCE_PREFIX}/lib64 --libexecdir=${XFCE_PREFIX}/lib64/xfce4 &&
make

Install the package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Directories:
| $XFCE_PREFIX/include/exo-{{Exo2-Version}}/exo, $XFCE_PREFIX/lib{64}/python{{Python-Version2}}/site-packages/exo-{{Exo2-Version}}/exo, $XFCE_PREFIX/share/pixmaps/exo-{{Exo2-Version}}, $XFCE_PREFIX/share/pygtk/2.0/defs/exo-{{Exo2-Version}}
|-valign="top"
! Installed Programs:
| exo-csource, exo-desktop-item-edit, exo-open
|-valign="top"
! Installed Libraries:
| libexo-{{Exo2-Version}}.{la,so}, exo-preferred-applications-settings.{la,so}, _exo.{la,so}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! exo-csource
|
|-
! exo-desktop-item-edit
|
|-
! exo-open
|
|}

Xfce4-Session

2007-02-17T13:53:56Z

Heybobc: Fixed webpage syntax error

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.xfce.org/archive/xfce-{{Xfce-Version}}/src/xfce4-session-{{Xfce-Version}}.tar.bz2
|}

== Introduction to Xfce4-Session ==

This is the session manager for the Xfce desktop environment.

Package Homepage: http://www.xfce.org

== Dependencies ==

=== Required ===
* [[Perl Module XML::Parser|XML::Parser]]
* [[libxfce4util]]
* [[libxfce4mcs]]
* [[libxfcegui4]]
* [[Xfce-MCS-Manager]]

=== Optional ===
* [[D-BUS]]
* [[GConf]] (required if passing the --enable-gnome switch)
* [[HAL]]
* [[sudo]]

== Configuration Information ==

{|
|--enable-gnome: Enable checking for assistive technologies support.
|-
|--enable-session-screenshots: Create screenshots of sessions on logout.
|}

== Non-Multilib ==

Compile the package:

./configure --prefix=${XFCE_PREFIX} --sysconfdir=/etc/xfce \
--libexecdir=${XFCE_PREFIX}/lib/xfce4 &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

USE_ARCH=32 CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=${XFCE_PREFIX} --sysconfdir=/etc/xfce \
--libexecdir=${XFCE_PREFIX}/lib/xfce4 &&
make

Install the package:

make install

=== N32 ===

USE_ARCH=N32 CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=${XFCE_PREFIX} --libdir=${XFCE_PREFIX}/lib32 \
--sysconfdir=/etc/xfce --libexecdir=${XFCE_PREFIX}/lib32/xfce4 &&
make

Install the package:

make install

=== 64Bit ===

USE_ARCH=64 CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=${XFCE_PREFIX} --libdir=${XFCE_PREFIX}/lib64 \
--sysconfdir=/etc/xfce --libexecdir=${XFCE_PREFIX}/lib64/xfce4 &&
make

Install the package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Directories:
| $XFCE_PREFIX/include/xfce4/xfce4-session-4.2/libxfsm, $XFCE_PREFIX/share/themes/Default/balou, $XFCE_PREFIX/lib64/xfce4/splash/engines, $XFCE_PREFIX/share/icons/hicolor/{48x48,64x64,72x72,128x128,scalable}, /etc/xfce/xdg/xfce4-session
|-valign="top"
! Installed Programs:
| xfce4-session, xfce4-session-logout, xfce4-autostart-editor, xfce4-tips
|-valign="top"
! Installed Libraries:
| libxfsm-4.2.{la,so}, libbalou.{ls,so}, libmice.{la,so}, splash_settings.{la,so}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
|
|-valign="top"
|
|-valign="top"
|
|}

Xfce4-Session

2007-02-17T13:51:10Z

Heybobc: Added Perl XML Parser dependency

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.xfce.org/archive/xfce-{{Xfce-Version}}/src/xfce4-session-{{Xfce-Version}}.tar.bz2
|}

== Introduction to Xfce4-Session ==

This is the session manager for the Xfce desktop environment.

Package Homepage: http://www.xfce.org

== Dependencies ==

=== Required ===
* [[XML::Parser]]
* [[libxfce4util]]
* [[libxfce4mcs]]
* [[libxfcegui4]]
* [[Xfce-MCS-Manager]]

=== Optional ===
* [[D-BUS]]
* [[GConf]] (required if passing the --enable-gnome switch)
* [[HAL]]
* [[sudo]]

== Configuration Information ==

{|
|--enable-gnome: Enable checking for assistive technologies support.
|-
|--enable-session-screenshots: Create screenshots of sessions on logout.
|}

== Non-Multilib ==

Compile the package:

./configure --prefix=${XFCE_PREFIX} --sysconfdir=/etc/xfce \
--libexecdir=${XFCE_PREFIX}/lib/xfce4 &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

USE_ARCH=32 CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=${XFCE_PREFIX} --sysconfdir=/etc/xfce \
--libexecdir=${XFCE_PREFIX}/lib/xfce4 &&
make

Install the package:

make install

=== N32 ===

USE_ARCH=N32 CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=${XFCE_PREFIX} --libdir=${XFCE_PREFIX}/lib32 \
--sysconfdir=/etc/xfce --libexecdir=${XFCE_PREFIX}/lib32/xfce4 &&
make

Install the package:

make install

=== 64Bit ===

USE_ARCH=64 CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=${XFCE_PREFIX} --libdir=${XFCE_PREFIX}/lib64 \
--sysconfdir=/etc/xfce --libexecdir=${XFCE_PREFIX}/lib64/xfce4 &&
make

Install the package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Directories:
| $XFCE_PREFIX/include/xfce4/xfce4-session-4.2/libxfsm, $XFCE_PREFIX/share/themes/Default/balou, $XFCE_PREFIX/lib64/xfce4/splash/engines, $XFCE_PREFIX/share/icons/hicolor/{48x48,64x64,72x72,128x128,scalable}, /etc/xfce/xdg/xfce4-session
|-valign="top"
! Installed Programs:
| xfce4-session, xfce4-session-logout, xfce4-autostart-editor, xfce4-tips
|-valign="top"
! Installed Libraries:
| libxfsm-4.2.{la,so}, libbalou.{ls,so}, libmice.{la,so}, splash_settings.{la,so}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
|
|-valign="top"
|
|-valign="top"
|
|}

Xfce-MCS-Manager

2007-02-17T04:12:00Z

Heybobc: Add --libdir arg to configure. It uses libdir to install the pkgconfig file.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.xfce.org/archive/xfce-{{Xfce-Version}}/src/xfce-mcs-manager-{{Xfce-Version}}.tar.bz2
|}

== Introduction to Xfce-MCS-Manager ==

This is the Xfce 4 settings manager. The Xfce 4 settings manager provides access to the settings of all Xfce 4 components. This package provides dialogs to change settings for mouse behaviour, keyboard and user interface (including themes).

'''Package Homepage:''' http://www.xfce.org

== Dependencies ==

=== Required ===
* [[libxfcegui4]]
* [[libxfce4mcs]]

== Configuration Information ==

{|style="text-align: left"
|-
|--enable-loadprof: enable load profiling.
|}

== Non-Multilib ==

Compile the pacakge:

./configure --prefix=${XFCE_PREFIX} &&
make

Install the package:

make install

== Multilib ==

This package does not provide any libraries so only one installation is required.

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=${XFCE_PREFIX} &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=${XFCE_PREFIX} &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=${XFCE_PREFIX} --libdir=${XFCE_PREFIX}/lib64 &&
make

Install the package:

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Directories:
| $XFCE_PREFIX/share/glib-2.0, $XFCE_PREFIX/include/xfce4/xfce-mcs-manager
|-valign="top"
! Installed Programs:
| xfce-mcs-manager
|-valign="top"
! Installed Libraries:
| None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! xfce-mcs-manager
| The multi channel MCS manager.
|}

Xorg7/xterm

2007-02-16T13:08:00Z

Heybobc: Change paths for $XORG_PREFIX != /usr

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|-
| ftp://invisible-island.net/xterm/xterm.tar.gz
|}

Return to [[Xorg7/Drivers|Drivers]]

== Introduction to xterm ==

The xterm program is a terminal emulator for the X Window System. It provides DEC VT102 and Tektronix 4014 compatible terminals for programs that can't use the window system directly. Xterm is '''not''' distributed as part of the modular Xorg. You must retrieve it from the upstream source.

== Dependencies ==

=== Required ===
* libXaw from [[Xorg7/Libraries|Libraries]]

=== Optional ===
* [[FreeType]]

== Non-Multilib ==

Compile this package:

./configure $XORG_CONFIG
make

Install this package:

make install &&
make install-ti

== Multilib ==

=== 32Bit ===

Compile this package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 CC="gcc ${BUILD32}" ./configure \
${XORG_CONFIG32} --with-wide-chars &&
make

Install this package:

make install &&
make install-ti

=== N32 ===

Compile this package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=32 CC="gcc ${BUILDN32}" ./configure \
${XORG_CONFIGN32} --with-wide-chars --libdir=/usr/lib32 &&
make appsdir=${XORG_PREFIX}/lib32/X11/app-defaults

Install this package:

make appsdir=${XORG_PREFIX}/lib32/X11/app-defaults install &&
make appsdir=${XORG_PREFIX}/lib32/X11/app-defaults install-ti

=== 64Bit ===

Compile this package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 CC="gcc ${BUILD64}" ./configure \
${XORG_CONFIG64} --with-wide-chars --libdir=/usr/lib64 &&
make appsdir=${XORG_PREFIX}/lib64/X11/app-defaults

Install this package:

make appsdir=${XORG_PREFIX}/lib64/X11/app-defaults install &&
make appsdir=${XORG_PREFIX}/lib64/X11/app-defaults install-ti

== Configuring xterm ==

You will only need the first file on a non-multilib system.

cat >> $XORG_PREFIX/lib/X11/app-defaults/XTerm << "EOF"
*VT100*locale: true
*VT100*faceName: Monospace
*VT100*faceSize: 10
EOF

cat >> $XORG_PREFIX/lib32/X11/app-defaults/XTerm << "EOF"
*VT100*locale: true
*VT100*faceName: Monospace
*VT100*faceSize: 10
EOF

cat >> $XORG_PREFIX/lib64/X11/app-defaults/XTerm << "EOF"
*VT100*locale: true
*VT100*faceName: Monospace
*VT100*faceSize: 10
EOF

Next install [[Xorg7/rman|rman]]

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| resize, uxterm, xterm
|}

=== Short Description ===

{| style="text-align: left;"
|-valign="top"
! resize
|prints a shell command for setting the TERM and TERMCAP environment variables to indicate the current size of xterm window.
|-valign="top"
! uxterm
|wrapper script to start xterm in UTF-8 locales.
|-valign="top"
! xterm
|a terminal emulator for the [[X Window System]].
|}

Xorg7/xterm

2007-02-16T13:02:29Z

Heybobc: Change paths for $XORG_PREFIX != /usr

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|-
| ftp://invisible-island.net/xterm/xterm.tar.gz
|}

Return to [[Xorg7/Drivers|Drivers]]

== Introduction to xterm ==

The xterm program is a terminal emulator for the X Window System. It provides DEC VT102 and Tektronix 4014 compatible terminals for programs that can't use the window system directly. Xterm is '''not''' distributed as part of the modular Xorg. You must retrieve it from the upstream source.

== Dependencies ==

=== Required ===
* libXaw from [[Xorg7/Libraries|Libraries]]

=== Optional ===
* [[FreeType]]

== Non-Multilib ==

Compile this package:

./configure $XORG_CONFIG
make

Install this package:

make install &&
make install-ti

== Multilib ==

=== 32Bit ===

Compile this package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 CC="gcc ${BUILD32}" ./configure \
${XORG_CONFIG32} --with-wide-chars &&
make

Install this package:

make install &&
make install-ti

=== N32 ===

Compile this package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=32 CC="gcc ${BUILDN32}" ./configure \
${XORG_CONFIGN32} --with-wide-chars --libdir=/usr/lib32 &&
make appsdir=${XORG_PREFIX}/lib32/X11/app-defaults

Install this package:

make appsdir=${XORG_PREFIX}/lib32/X11/app-defaults install &&
make appsdir=${XORG_PREFIX}/lib32/X11/app-defaults install-ti

=== 64Bit ===

Compile this package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 CC="gcc ${BUILD64}" ./configure \
${XORG_CONFIG64} --with-wide-chars --libdir=/usr/lib64 &&
make appsdir=/usr/lib64/X11/app-defaults

Install this package:

make appsdir=/usr/lib64/X11/app-defaults install &&
make appsdir=/usr/lib64/X11/app-defaults install-ti

== Configuring xterm ==

You will only need the first file on a non-multilib system.

cat >> $XORG_PREFIX/lib/X11/app-defaults/XTerm << "EOF"
*VT100*locale: true
*VT100*faceName: Monospace
*VT100*faceSize: 10
EOF

cat >> $XORG_PREFIX/lib32/X11/app-defaults/XTerm << "EOF"
*VT100*locale: true
*VT100*faceName: Monospace
*VT100*faceSize: 10
EOF

cat >> $XORG_PREFIX/lib64/X11/app-defaults/XTerm << "EOF"
*VT100*locale: true
*VT100*faceName: Monospace
*VT100*faceSize: 10
EOF

Next install [[Xorg7/rman|rman]]

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| resize, uxterm, xterm
|}

=== Short Description ===

{| style="text-align: left;"
|-valign="top"
! resize
|prints a shell command for setting the TERM and TERMCAP environment variables to indicate the current size of xterm window.
|-valign="top"
! uxterm
|wrapper script to start xterm in UTF-8 locales.
|-valign="top"
! xterm
|a terminal emulator for the [[X Window System]].
|}