CBLFS - User contributions [en]

XviD

2010-11-04T16:36:18Z

Hoeth: updated library suffix

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.xvid.org/downloads/xvidcore-{{XviD-Version}}.tar.bz2
|}

----

{{Package-Introduction|XviD is an MPEG-4 compliant video codec.|http://xvid.org/}}

== Dependencies ==

=== Optional ===
* [[NASM]]
* [[Yasm]]

== Non-Multilib ==

Configure and compile the package:

cd build/generic &&
./configure --prefix=/usr &&
make

Install the package:

make install &&
chmod -v 755 /usr/lib/libxvidcore.so.4.2 &&
ln -v -sf libxvidcore.so.4.2 /usr/lib/libxvidcore.so.4 &&
ln -v -sf libxvidcore.so.4 /usr/lib/libxvidcore.so &&
install -v -m755 -d /usr/share/doc/xvidcore-{{XviD-Version}}/examples &&
install -v -m644 ../../doc/* /usr/share/doc/xvidcore-{{XviD-Version}} &&
install -v -m644 ../../examples/* /usr/share/doc/xvidcore-{{XviD-Version}}/examples

== Multilib ==

=== 32Bit ===

Configure and compile the package:

cd build/generic &&
CC="gcc ${BUILD32}" ./configure --prefix=/usr --build=${CLFS_TARGET32} &&
make

Install the package:

make install &&
chmod -v 755 /usr/lib/libxvidcore.so.4.2 &&
ln -v -sf libxvidcore.so.4.2 /usr/lib/libxvidcore.so.4 &&
ln -v -sf libxvidcore.so.4 /usr/lib/libxvidcore.so

=== N32 ===

Configure and compile the package:

cd build/generic &&
CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install &&
chmod -v 755 /usr/lib/libxvidcore.so.4.2 &&
ln -v -sf libxvidcore.so.4.2 /usr/lib32/libxvidcore.so.4 &&
ln -v -sf libxvidcore.so.4 /usr/lib32/libxvidcore.so

=== 64Bit ===

Configure and compile the package:

cd build/generic &&
CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install &&
chmod -v 755 /usr/lib64/libxvidcore.so.4.2 &&
ln -v -sf libxvidcore.so.4.2 /usr/lib64/libxvidcore.so.4 &&
ln -v -sf libxvidcore.so.4 /usr/lib64/libxvidcore.so &&
install -v -m755 -d /usr/share/doc/xvidcore-{{XviD-Version}}/examples &&
install -v -m644 ../../doc/* /usr/share/doc/xvidcore-{{XviD-Version}} &&
install -v -m644 ../../examples/* /usr/share/doc/xvidcore-{{XviD-Version}}/examples

[[Category:Media Libraries]]

Schroedinger

2010-11-04T16:27:05Z

Hoeth: missing dependency: orc

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://diracvideo.org/download/schroedinger/schroedinger-1.0.10.tar.gz
|}

----

{{Package-Introduction|Dirac is an advanced royalty-free video compression format designed for a wide range of uses, from delivering low-resolution web content to broadcasting HD and beyond, to near-lossless studio editing.|http://www.diracvideo.org/}}

== Dependencies ==
== Required ==
* [[liboil]]
* [http://code.entropywave.com/projects/orc/ Orc - The Oil Runtime Compiler]
== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr &&

make

Install the package

make install

[[Category:Media Libraries]]

Template:SDL-Version

2010-11-03T14:34:15Z

Hoeth:

1.2.14

FFTW

2010-11-03T14:08:26Z

Hoeth: renamend --with-openmp to --enable-openmp

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.fftw.org/pub/fftw/fftw-{{FFTW-Version}}.tar.gz
|}

----

{{Package-Introduction|FFTW is a C subroutine library for computing the discrete Fourier transform (DFT) in one or more dimensions. The name, "FFTW," stands for "Fastest Fourier Transform in the West." FFTW was developed at MIT, which is in the east. [[DJBFFT]] is an alternative that claims to be faster.|http://www.fftw.org/}}

== Dependencies ==

=== Optional ===

* [[Objective Caml]]
* [[OpenMPI]] is required if passing the --enable-openmp: switch to the configure script.

== Configuration Information ==

Some options that you may wish to pass to the configure script.

{|style="text-align: left"
|-valign=top
|--enable-single: compile FFTW in single precision.
|-valign=top
|--enable-long-double: compile FFTW in long-double precision.
|-valign=top
|--enable-k7: enable AMD k7 optimizations, including 3dNow!
|-valign=top
|--enable-sse: enable SSE optimizations.
|-valign=top
|--enable-sse2: enable SSE2 optimizations.
|-valign=top
|--disable-fortran: don't include FORTRAN callable wrappers.
|-valign=top
|--enable-openmp: use OpenMP directives instead of a threads library.
|}

{{Note|The default is to build a double precision library. Generally one would build fftw three times; add the --enable-single and --enable-long-double options to the configuration for subsequent builds. This will result in libfft3, libfftw3f, and libfftw3l for single, double, and long-double libraries.}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --enable-shared --enable-threads &&
make

Install the package:

make install

Build and install the info pages for FFTW:

make install-info

Install the PDF documentation for FFTW:

install -v -m755 -d /usr/share/doc/FFTW-{{FFTW-Version}} &&
cp -v doc/fftw3.pdf /usr/share/doc/FFTW-{{FFTW-Version}}

Install the html documentation for FFTW:

install -v -m755 -d /usr/share/doc/FFTW-{{FFTW-Version}}/html &&
cp -v doc/html/*.html /usr/share/doc/FFTW-{{FFTW-Version}}/html

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32} -fPIC" CXX="g++ ${BUILD32} -fPIC" \
./configure --prefix=/usr --enable-shared --enable-threads &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32} -fPIC" CXX="g++ ${BUILDN32} -fPIC" \
./configure --prefix=/usr --libdir=/usr/lib32 --enable-shared --enable-threads &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64} -fPIC" CXX="g++ ${BUILD64} -fPIC" \
./configure --prefix=/usr --libdir=/usr/lib64 --enable-shared --enable-threads &&
make

Install the package:

make install

Build and install the info pages for FFTW:

make install-info

Install the PDF documentation for FFTW:

install -v -m755 -d /usr/share/doc/FFTW-{{FFTW-Version}} &&
cp -v doc/fftw3.pdf /usr/share/doc/FFTW-{{FFTW-Version}}

Install the html documentation for FFTW:

install -v -m755 -d /usr/share/doc/FFTW-{{FFTW-Version}}/html &&
cp -v doc/html/*.html /usr/share/doc/FFTW-{{FFTW-Version}}/html

= Contents =

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|None
|-valign="top"
!Installed Programs:
|fftwl-wisdom, fftw-wisdom-to-conf
|-valign="top"
!Installed Libraries:
|libfftw3l.so, libfftw3l.la, libfftw3l.a
|-valign="top"
!Symlinks:
|None
|}

== Short Description ==

{| style="text-align: left
|-valign="top"
!fftwl-wisdom:
|Creates wisdom (pre-planned/optimized transforms) for specified sizes, writing wisdom to stdout or file.
|-valign="top"
!fftw-wisdom-to-conf:
|Converts wisdom (stdin) to C configuration routine (stdout).
|}

[[Category:Science_Engineering]]

GNOME Keyring

2008-05-22T15:21:33Z

Hoeth: dependencies

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://ftp.gnome.org/pub/GNOME/sources/gnome-keyring/{{GNOME Keyring-Version2}}/gnome-keyring-{{GNOME Keyring-Version}}.tar.bz2
|}

----

{{Package-Introduction|GNOME Keyring is a program to take care of the user's security credentials, such as user names and passwords.|http://www.gnome.org}}

== Dependencies ==

=== Required ===
* [[Gtk2]]
* [[libGCrypt]]
* [[LibtASN1]]
* [[GConf]]
=== Recommended ===
* [[Linux-PAM]]
=== Optional ===
* [[Gtk-Doc]]
* [[HAL]]

== Non-Multilib ==

Compile the package:

./configure --prefix=${GNOME_PREFIX} --sysconfdir=/etc/gnome \
--libexecdir=${GNOME_PREFIX}/lib/gnome-keyring \
--with-pam-dir=/lib/security &&
make

Install the package

make install install-pam

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
USE_ARCH=32 ./configure --prefix=${GNOME_PREFIX} --sysconfdir=/etc/gnome \
--libexecdir=${GNOME_PREFIX}/lib/gnome-keyring \
--with-pam-dir=/lib/security &&
make

Install the package

make install install-pam

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
USE_ARCH=n32 ./configure --prefix=${GNOME_PREFIX} --sysconfdir=/etc/gnome --libdir=${GNOME_PREFIX}/lib32 \
--libexecdir=${GNOME_PREFIX}/lib32/gnome-keyring \
--with-pam-dir=/lib32/security &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
USE_ARCH=64 ./configure --prefix=${GNOME_PREFIX} --sysconfdir=/etc/gnome --libdir=${GNOME_PREFIX}/lib64 \
--libexecdir=${GNOME_PREFIX}/lib64/gnome-keyring \
--with-pam-dir=/lib64/security &&
make

Install the package

make install install-pam
== Contents ==

{|style="text-align: left"
|-valign="top"
!Installed Directories:
|${GNOME_PREFIX}/lib/gnome-keyring, ${GNOME_PREFIX}/include/gnome-keyring-1, ${GNOME_PREFIX}/share/gtk-doc/html/gnome-keyring,
|-valign="top"
!Installed Programs:
|gnome-keyring-daemon
|-valign="top"
!Installed Libraries:
|libgnome-keyring.so, libgnome-keyring.la
|-valign="top"
!Symlinks:
|${GNOME_PREFIX}/lib/libgnome-keyring.so.0 --> ${GNOME_PREFIX}/lib/libgnome-keyring.so.0.0.1, ${GNOME_PREFIX}/lib/libgnome-keyring.so --> ${GNOME_PREFIX}/lib/libgnome-keyring.so.0.0.1,
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!gnome-keyring-daemon
|
|-valign="top"
!libgnome-keyring.{so,la}
|
|}

Ekiga

2008-04-09T06:14:16Z

Hoeth:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.ekiga.org/admin/downloads/latest/sources/sources/ekiga-{{Ekiga-Version}}.tar.gz
|}

----

{{Package-Introduction|Ekiga is a VoIP and video conferencing application, supporting H.323 and SIP.|http://www.ekiga.org/}}

== Dependencies ==

=== Required ===
* [[pwlib]]
* [[opal]]
* [[GConf]]
* [[libgnomeui]]
* [[EsounD]]

=== Recommended ===
* [[ScrollKeeper]]
* [[SDL]]
=== Optional ===
* [[D-BUS Glib]]
* [[Avahi]]
* [[Evolution Data Server]]

== Non-Multilib ==

Build the package:

./configure --prefix=${GNOME_PREFIX} --sysconfdir=/etc/gnome \
--localstatedir=/var/lib --enable-dbus &&
make

Install the package:

make install

== Multilib ==
'''''This pacakge does not install any libraries so only one installation is needed.'''''

=== 32Bit ===

Build the package:

export PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 \
./configure --prefix=${GNOME_PREFIX} --sysconfdir=/etc/gnome \
--localstatedir=/var/lib --enable-dbus &&
make

Install the package:

make install &&
unset PKG_CONFIG_PATH

=== N32 ===

TODO

=== 64Bit ===

Build the package:

export PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 \
./configure --prefix=${GNOME_PREFIX} --sysconfdir=/etc/gnome \
--localstatedir=/var/lib --libdir=${GNOME_PREFIX}/lib64 \
--enable-dbus &&
make

Install the package:

make install &&
unset PKG_CONFIG_PATH

IO::Compress::Zlib

2008-04-02T13:55:13Z

Hoeth: dependencies

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://search.cpan.org/CPAN/authors/id/P/PM/PMQS/IO-Compress-Zlib-{{IO::Compress::Zlib-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Required ==
* [[Perl Module IO::Compress::Base|IO::Compress::Base]]
* [[Perl Module Compress::Raw::Zlib|Compress::Raw::Zlib]]

== Recommended ==
* [[Perl Module IO::Compress::Bzip2|IO::Compress::Bzip2]]

== Optional ==
* [[Perl Module Test::Pod|Test::Pod]]

{{Perl Module Common Build}}

IO::Compress::Bzip2

2008-04-02T13:46:23Z

Hoeth: dependencies

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://search.cpan.org/CPAN/authors/id/P/PM/PMQS/IO-Compress-Bzip2-{{IO::Compress::Bzip2-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Required ==
* [[Perl Module Compress::Raw::Bzip2|Compress::Raw::Bzip2]]
* [[Perl Module IO::Compress::Base|IO::Compress::Base]]

== Optional ==
* [[Perl Module Test::Pod|Test::Pod]]

{{Perl Module Common Build}}

Compress::Raw::Bzip2

2008-04-02T13:43:33Z

Hoeth: dependencies

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://search.cpan.org/CPAN/authors/id/P/PM/PMQS/Compress-Raw-Bzip2-{{Compress::Raw::Bzip2-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Optional ==
* [[Perl Module Test::Pod|Test::Pod]]

{{Perl Module Common Build}}

Libwww

2008-04-02T13:42:23Z

Hoeth: dependencies

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://search.cpan.org/CPAN/authors/id/G/GA/GAAS/libwww-perl-5.808.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Dependencies ==

=== Required ===
* [[Perl Module URI|URI]]
* [[Perl Module HTML::Parser]]
* [[Perl Module Compress::Zlib]]

{{Perl Module Common Build}}

IO::Compress::Base

2008-04-02T10:28:10Z

Hoeth: dependencies

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://search.cpan.org/CPAN/authors/id/P/PM/PMQS/IO-Compress-Base-{{IO::Compress::Base-Version}}.tar.gz
|}

----

{{Blank-Package-Introduction}}

== Optional ==
* [[Perl Module Test::Pod|Test::Pod]]

{{Perl Module Common Build}}

Wireless tools

2008-03-09T21:21:42Z

Hoeth: Version template and project webpage

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/wireless_tools.{{Wireless tools-Version}}.tar.gz
|}

----

{{Package-Introduction|The Wireless Extension (WE) is a generic API in the Linux kernel allowing a driver to expose configuration and statistics specific to common Wireless LANs to user space. A single set of tools can support all the variations of Wireless LANs, regardless of their type as long as the driver supports Wireless Extensions. WE parameters may also be changed on the fly without restarting the driver (or Linux).

The Wireless Tools (WT) package is a set of tools allowing manipulation of the Wireless Extensions. They use a textual interface to support the full Wireless Extension.|http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

make

Install the package

make PREFIX=/usr install

== Multilib ==

=== 32Bit ===

Compile the package:

make CC="gcc ${BUILD32}"

Install the package

make PREFIX=/usr install

=== N32 ===

Compile the package:

make CC="gcc ${BUILDN32}"

Install the package

make PREFIX=/usr INSTALL_LIB=/usr/lib32 install

=== 64Bit ===

Compile the package:

make CC="gcc ${BUILD64}"

Install the package

make PREFIX=/usr INSTALL_LIB=/usr/lib64 install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| iwconfig iwlist iwpriv iwspy iwgetid iwevent ifrename
|-valign="top"
! Installed Libraries:
| libiw.so.{{Wireless tools-Version}} libiw.so
|}

Template:Wireless tools-Version

2008-03-09T21:17:51Z

Hoeth: new version

ATLAS

2008-03-06T11:09:30Z

Hoeth: some systems require ranlib

{|style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://downloads.sourceforge.net/math-atlas/atlas{{ATLAS-Version}}.tar.bz2
|-
!Download Patch:
|http://svn.cross-lfs.org/svn/repos/patches/atlas-{{ATLAS-Version}}/atlas-{{ATLAS-Version}}-shared-libs-1.patch
|-
!Download Patch:
|http://svn.cross-lfs.org/svn/repos/patches/atlas-{{ATLAS-Version}}/atlas-{{ATLAS-Version}}-decl-fix-1.patch
|}

----

{{Package-Introduction|BLAS are '''B'''asic '''L'''inear '''A'''lgebra '''S'''ubprograms written in Fortran. There are Level 1 (scalar and vector operations), Level 2 (scalar-matrix operations) and Level 3 (matrix-matrix operations) subprograms. ATLAS (Automatically Tuned Linear Algebra Software) will provide C and FORTRAN interfaces to a BLAS implementation optimized for a specific machine architecture. The ideal source of BLAS and LAPACK libraries are those provided by the microprocesor vendor such as AMD's [[ACML]]. However, these are not provided under a license that allows re-distribution without written consent from the vendor.|http://www.netlib.org/blas/}}

== Configuration Information ==

Patch the package:

patch -Np1 -i ../atlas-{{ATLAS-Version}}-decl-fix-1.patch &&
patch -Np1 -i ../atlas-{{ATLAS-Version}}-shared-libs-1.patch

Create a wrapper script to assist in building the shared libraries:

export BUILD_DIR=CBLFS-build &&
mkdir -pv ${BUILD_DIR} &&
cd ${BUILD_DIR}

cat > war << "EOF"
#! /bin/bash
#
# war -- wrapper for the archiver
#
# Executed by ATLAS build as:
# full_path/war ARCHIVER ARFLAGS LIBNAME.a OBJS.lo

TOPDIR=$(echo $0 | sed 's/$.*$\/.*/\1/')
PWD=$(pwd)

ARCHIVER=$1
LIBRARY=$(echo $3 | sed 's/.*\/$.*$/\1/')
OBJ_DIR=${TOPDIR}/CBLFS/$LIBRARY

if [ ! -x $OBJ_DIR ]; then mkdir -p ${OBJ_DIR}/.libs; fi

$ARCHIVER $@

shift 3
for obj in $@ ; do
lobj=$(echo $obj | sed 's/\.o/\.lo/')
ln -sf ${PWD}/$obj ${OBJ_DIR}/$obj
ln -sf ${PWD}/$lobj ${OBJ_DIR}/$lobj
ln -sf ${PWD}/.libs/$obj ${OBJ_DIR}/.libs/$obj
done
EOF

Make the script executable:

chmod a+x war

== Non-Multilib ==

{{Note|Either create a BUILD variable similar to the multiarch BUILD32, BUILDN32, and BUILD64 with compiler options or replace ${BUILD} in the configure flags below with your compiler options directly.}}

{{Note|Replace the <BITS> in the configure command below with 32 or 64 as appropriate for your non-multilib architecture.}}

{{Note|On some systems the make step fails. If this happens to you, try
sed -i "/RANLIB/s/echo/ranlib/" Make.inc
after running configure, but before running make.}}

Compile the package:

../configure --cc=gcc --cflags="${BUILD}" --prefix=/usr --incdir=/usr/include/atlas \
-C ac gcc -F ac "${BUILD}" -C if gfortran -F if "${BUILD}" -Ss pmake "\make -j3" \
-Si cputhrchk 0 -b <BITS> &&
make &&
export RPATH=/usr/lib/blas/atlas &&
make LIBDIR=/usr/lib RPATH="${RPATH}" shared

Timing tests are critical for optimizing the performance of the libraries for your machine. Do not skip the tests.

for i in F77 C; do
cd interfaces/blas/${i}/testing
make sanity_test
if <nowiki>[[ -d CBLFS/libptf77blas.a ]]</nowiki>; then
make ptsanity_test
fi
done
cd ../../../../
make time

Install the package:

mkdir -pv ${RPATH} &&
cd ./CBLFS/libs &&
cp -vP libatlas* ${RPATH} &&
cp -vP *blas* ${RPATH} &&
mkdir -pv /usr/include/atlas &&
install -v ../../../include/cblas.h /usr/include/atlas &&
install -v ../../../include/atlas_misc.h /usr/include/atlas &&
install -v ../../../include/atlas_enum.h /usr/include/atlas &&
install -v ../../include/*.h /usr/include/atlas

== Multilib ==

=== 32Bit ===

Compile the package:

../configure --cc=gcc --cflags="${BUILD32}" --prefix=/usr --libdir=/usr/lib64 --incdir=/usr/include/atlas \
-C ac gcc -F ac "${BUILD32}" -C if gfortran -F if "${BUILD32}" -Ss pmake "\make -j3" -Si cputhrchk 0 -b 32 &&
make &&
export RPATH=/usr/lib/blas/atlas &&
make LIBDIR=/usr/lib RPATH="${RPATH}" shared

Timing tests are critical for optimizing the performance of the libraries for your machine. Do not skip the tests.

for i in F77 C; do
cd interfaces/blas/${i}/testing
make sanity_test
if <nowiki>[[ -d CBLFS/libptf77blas.a ]]</nowiki>; then
make ptsanity_test
fi
done
cd ../../../../
make time

Install the package:

mkdir -pv ${RPATH} &&
cd ./CBLFS/libs &&
cp -vP libatlas* ${RPATH} &&
cp -vP *blas* ${RPATH} &&
mkdir -pv /usr/include/atlas &&
install -v ../../../include/cblas.h /usr/include/atlas &&
install -v ../../../include/atlas_misc.h /usr/include/atlas &&
install -v ../../../include/atlas_enum.h /usr/include/atlas &&
install -v ../../include/*.h /usr/include/atlas

=== N32 ===

Compile the package:

../configure --cc=gcc --cflags="${BUILDN32}" --prefix=/usr --libdir=/usr/lib64 --incdir=/usr/include/atlas \
-C ac gcc -F ac "${BUILDN32}" -C if gfortran -F if "${BUILDN32}" -Ss pmake "\make -j3" -Si cputhrchk 0 -b 32 &&
make &&
export RPATH=/usr/lib32/blas/atlas &&
make LIBDIR=/usr/lib32 RPATH="${RPATH}" shared

Timing tests are critical for optimizing the performance of the libraries for your machine. Do not skip the tests.

for i in F77 C; do
cd interfaces/blas/${i}/testing
make sanity_test
if <nowiki>[[ -d CBLFS/libptf77blas.a ]]</nowiki>; then
make ptsanity_test
fi
done
cd ../../../../
make time

Install the package:

mkdir -pv ${RPATH} &&
cd ./CBLFS/libs &&
cp -vP libatlas* ${RPATH} &&
cp -vP *blas* ${RPATH} &&
mkdir -pv /usr/include/atlas &&
install -v ../../../include/cblas.h /usr/include/atlas &&
install -v ../../../include/atlas_misc.h /usr/include/atlas &&
install -v ../../../include/atlas_enum.h /usr/include/atlas &&
install -v ../../include/*.h /usr/include/atlas

=== 64Bit ===

Compile the package:

../configure --cc=gcc --cflags="${BUILD64}" --prefix=/usr --libdir=/usr/lib64 --incdir=/usr/include/atlas \
-C ac gcc -F ac "${BUILD64}" -C if gfortran -F if "${BUILD64}" -Ss pmake "\make -j3" -Si cputhrchk 0 -b 64 &&
make &&
export RPATH=/usr/lib64/blas/atlas &&
make LIBDIR=/usr/lib64 RPATH="${RPATH}" shared

Timing tests are critical for optimizing the performance of the libraries for your machine. Do not skip the tests.

for i in F77 C; do
cd interfaces/blas/${i}/testing
make sanity_test
if <nowiki>[[ -d CBLFS/libptf77blas.a ]]</nowiki>; then
make ptsanity_test
fi
done
cd ../../../../
make time

Install the package:

mkdir -pv ${RPATH} &&
cd ./CBLFS/libs &&
cp -vP libatlas* ${RPATH} &&
cp -vP *blas* ${RPATH} &&
mkdir -pv /usr/include/atlas &&
install -v ../../../include/cblas.h /usr/include/atlas &&
install -v ../../../include/atlas_misc.h /usr/include/atlas &&
install -v ../../../include/atlas_enum.h /usr/include/atlas &&
install -v ../../include/*.h /usr/include/atlas

== Configuration Information ==

Create and install pkgconfig metadata files:

cat > blas.pc.in << "EOF"
prefix=/usr
exec_prefix=${prefix}
libdir=/usr/<LIB>/blas/atlas
includedir=${prefix}/include

Name: blas
Description: Automatically Tuned Linear Algebra Software F77 BLAS implementation
Version: 3.8.0
URL: http://math-atlas.sourceforge.net/
Libs: -L${libdir} -lblas -latlas
Libs.private: -lm -lgfortran
EOF

cat > cblas.pc.in << "EOF"
prefix=/usr
exec_prefix=${prefix}
libdir=/usr/<LIB>/blas/atlas
includedir=${prefix}/include

Name: cblas
Description: Automatically Tuned Linear Algebra Software C BLAS implementation
Version: 3.8.0
URL: http://math-atlas.sourceforge.net/
Libs: -L${libdir} -lcblas -latlas
Libs.private: -lm -lgfortran
Cflags: -I${includedir}
EOF

=== Non-Multilib or 32-Bit ===

sed -i 's/<LIB>/lib/' blas.pc.in &&
sed -i 's/<LIB>/lib/' cblas.pc.in &&
cp -v blas.pc.in /usr/lib/pkgconfig/blas.pc &&
cp -v cblas.pc.in /usr/lib/pkgconfig/cblas.pc

=== N32 ===

sed -i 's/<LIB>/lib32/' blas.pc.in &&
sed -i 's/<LIB>/lib32/' cblas.pc.in &&
cp -v blas.pc.in /usr/lib32/pkgconfig/blas.pc &&
cp -v cblas.pc.in /usr/lib32/pkgconfig/cblas.pc

=== 64-Bit ===

sed -i 's/<LIB>/lib64/' blas.pc.in &&
sed -i 's/<LIB>/lib64/' cblas.pc.in &&
cp -v blas.pc.in /usr/lib64/pkgconfig/blas.pc &&
cp -v cblas.pc.in /usr/lib64/pkgconfig/cblas.pc

== Contents ==

{|style="text-align: left"
|-valign="top";
!Installed Libraries:
| libatlas.{a,so}, libcblas.{a,so}, libblas{.a,so}
|}

=== Short Description ===

{|style="text-align: left"
|-valign="top"
!libatlas
|is the main ATLAS library, providing low-level routines for all interface libraries.
|-valign="top"
!libcblas
|is the C library with optimized BLAS functions.
|-valign="top"
!libblas
|is the FORTRAN library with optimized BLAS functions.
|}

Xorg7/Config

2008-03-02T20:09:32Z

Hoeth: spelling

=Configuring the X Window System=

==FHS Symlinks==

If you installed an [[X Window System]] into a prefix other than /usr and you wish to be [http://www.pathname.com/fhs FHS compliant], it is necessary to create some symbolic links.

ln -sv ${XORG_PREFIX}/bin /usr/bin/X11
ln -sv ${XORG_PREFIX}/include/X11 /usr/include/X11

===Non-Multilib===

ln -sv ${XORG_PREFIX}/lib/X11 /usr/lib/X11

===Multilib===

ln -sv ${XORG_PREFIX}/lib/X11 /usr/lib/X11
ln -sv ${XORG_PREFIX}/lib32/X11 /usr/lib32/X11
ln -sv ${XORG_PREFIX}/lib64/X11 /usr/lib64/X11

==Creating /etc/X11/xorg.conf==

Now, as the ''root'' user, create a basic X Window System Configuration file.

cd ~ &&
Xorg -configure

This will create a configuration file in ''root'''s home directory called xorg.conf.new. You may edit this file to provide specific settings for your system. Some things that are commonly edited.

*In Section "Files". Change the order of the font paths searched or remove some font directories completely (of course why did you install them if you weren't going to use them?).

*In Section "Module". If you are going to install nVidia drivers, remove the "Load dri" line.

*In Section "Device". You may want to set some of the options available for your selected video driver. If you have an nVidia chip, whether using the "nv" or the "nvidia" driver, you may need to edit this section to resolve [https://bugs.freedesktop.org/show_bug.cgi?id=3009 Xorg bug 3009] involving a missing mouse pointer. Add this line to Section "Device".

Option "HWCursor" "off"

*Xorg-7.3: If you have an Intel chip, the driver auto-detects all device information necessary to initialize the card. The only lines you should need in the "Device" section of your xorg.conf file are:

Section "Device"
Identifier "intel"
Driver "intel"
EndSection

Please refer to the intel(4) manual page for information on configuration
options.

*In Section "Screen". Add a DefaultDepth statement and in the SubSection for your default depth, add a modes line.

Test the system with

X -config ~/xorg.conf.new

You will only see a 'grey' background with black '''X''' cursor, but this indicates the X server is working. Exit with '''Control+Alt+Backspace'''. If the system does not work, take a look at /var/log/Xorg.0.log to see what went wrong.

As the ''root'' user, create the configuration directory and move the configuration file to the new directory:

install -v -m755 -D ~/xorg.conf.new /etc/X11/xorg.conf

Dhcpcd

2008-03-02T13:41:50Z

Hoeth: Project web site and new version

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://roy.marples.name/dhcpcd/dhcpcd-{{Dhcpcd-Version}}.tar.bz2
|}

----

{{Package-Introduction|A DHCP client|http://roy.marples.name/dhcpcd}}

== Dependencies ==

== Non-Multilib ==

Compile the package:

make CC="gcc"

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

make CC="gcc ${BUILD32}"

Install the package

make install

=== N32 ===

Compile the package:

make CC="gcc ${BUILDN32}"

Install the package

make install

=== 64Bit ===

Compile the package:

make CC="gcc ${BUILD64}"

Install the package

make install

== Configuring ==

=== Network Service ===

Install the dhcpcd service included in the [[bootscripts]] package:

make install-service-dhcpcd

=== Example Configuration ===

install -v -d /etc/sysconfig/network-devices/ifconfig.eth0 &&
cat > /etc/sysconfig/network-devices/ifconfig.eth0/dhcpcd << "EOF"
ONBOOT="yes"
SERVICE="dhcpcd"
DHCP_START=""
DHCP_STOP="-k"

# Set PRINTIP="yes" to have the script print
# the DHCP assigned IP address
PRINTIP="no"

# Set PRINTALL="yes" to print the DHCP assigned values for
# IP, SM, DG, and 1st NS. This requires PRINTIP="yes".
PRINTALL="no"
EOF

Template:Dhcpcd-Version

2008-03-02T13:37:09Z

Hoeth:

3.2.1

Strigi

2008-02-25T09:09:38Z

Hoeth: 64 bit multilib

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/strigi/strigi-{{Strigi-Version}}.tar.bz2
|-
!Additional Download:
| http://downloads.sourceforge.net/strigi/strigiapplet-{{Strigi-Version2}}.tar.bz2
|}

----

{{Package-Introduction|Strigi is a desktop and indexer independent desktop search engine.|http://strigi.sourceforge.net/}}

== Dependencies ==

{{Note|It's highly recommended to enable the inotify support in kernel.}}

=== Required ===
* [[CMake]]
* [[CLucene]]
* [[LibXML2]]

=== Recommended ===
* [[D-BUS]]
* [[CppUnit]]

=== Optional ===
* [[Qt4]] (to build gui interface)

== Configuration Information ==
{|
|-
|''-DENABLE_INOTIFY:BOOL=ON:'' enable inotify support. See note below.
|-
|''-DENABLE_DBUS:BOOL=ON:'' enable D-BUS support.
|}

== Non-Multilib ==

Compile the package:

mkdir build &&
cd build &&
cmake .. -DCMAKE_INSTALL_PREFIX=/usr \
-DENABLE_INOTIFY:BOOL=ON -DENABLE_DBUS:BOOL=ON &&
make

Install the package:

make install

Compile the strigiapplet package (Optional and only if you have KDE3):

mkdir build &&
cd build &&
cmake .. -DCMAKE_INSTALL_PREFIX=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

To do...

Install the package:

To do...

=== N32 ===

Compile the package:

To do...

Install the package:

To do...

=== 64Bit ===

Compile the package:

mkdir build &&
cd build &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" \
cmake .. -DCMAKE_INSTALL_PREFIX=/usr \
-DLIB_SUFFIX=64 \
-DCMAKE_LIBRARY_PATH=/usr/lib64 \
-DENABLE_INOTIFY:BOOL=ON -DENABLE_DBUS:BOOL=ON &&
make

Install the package:

make install

Compile the strigiapplet package (Optional and only if you have KDE3):

To do...

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/include/strigi, /usr/lib/strigi, /usr/share/strigi
|-valign="top"
!Installed Programs:
|deepfind, deepgrep, xmlindexer, strigicmd, luceneindexer, strigiclient, strigidaemon
|-valign="top"
!Installed Libraries:
|libstreams.so.{{Strigi-Version}}, libstreamanalyzer.so.{{Strigi-Version}}, libstreamanalyzer.so.{{Strigi-Version}}, libcluceneindex.so.{{Strigi-Version}}, libstrigihtmlgui.so.{{Strigi-Version}}, libstrigiqtdbusclient.so.{{Strigi-Version}}, libsearchclient.so.{{Strigi-Version}}
|}

Strigi

2008-02-25T00:09:50Z

Hoeth: website has moved to sourceforge

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/strigi/strigi-{{Strigi-Version}}.tar.bz2
|-
!Additional Download:
| http://downloads.sourceforge.net/strigi/strigiapplet-{{Strigi-Version2}}.tar.bz2
|}

----

{{Package-Introduction|Strigi is a desktop and indexer independent desktop search engine.|http://strigi.sourceforge.net/}}

== Dependencies ==

{{Note|It's highly recommended to enable the inotify support in kernel.}}

=== Required ===
* [[CMake]]
* [[CLucene]]
* [[LibXML2]]

=== Recommended ===
* [[D-BUS]]
* [[CppUnit]]

=== Optional ===
* [[Qt4]] (to build gui interface)

== Configuration Information ==
{|
|-
|''-DENABLE_INOTIFY:BOOL=ON:'' enable inotify support. See note below.
|-
|''-DENABLE_DBUS:BOOL=ON:'' enable D-BUS support.
|}

== Non-Multilib ==

Compile the package:

mkdir build &&
cd build &&
cmake .. -DCMAKE_INSTALL_PREFIX=/usr \
-DENABLE_INOTIFY:BOOL=ON -DENABLE_DBUS:BOOL=ON &&
make

Install the package:

make install

Compile the strigiapplet package (Optional and only if you have KDE3):

mkdir build &&
cd build &&
cmake .. -DCMAKE_INSTALL_PREFIX=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

To do...

Install the package:

To do...

=== N32 ===

Compile the package:

To do...

Install the package:

To do...

=== 64Bit ===

Compile the package:

To do...

Install the package:

To do...

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/include/strigi, /usr/lib/strigi, /usr/share/strigi
|-valign="top"
!Installed Programs:
|deepfind, deepgrep, xmlindexer, strigicmd, luceneindexer, strigiclient, strigidaemon
|-valign="top"
!Installed Libraries:
|libstreams.so.{{Strigi-Version}}, libstreamanalyzer.so.{{Strigi-Version}}, libstreamanalyzer.so.{{Strigi-Version}}, libcluceneindex.so.{{Strigi-Version}}, libstrigihtmlgui.so.{{Strigi-Version}}, libstrigiqtdbusclient.so.{{Strigi-Version}}, libsearchclient.so.{{Strigi-Version}}
|}

Ghostscript

2008-02-23T20:52:54Z

Hoeth:

{{Note|[[ESP Ghostscript]] has been ported back into [[GPL Ghostscript]] . It is now recommended that all linux systems use [[GPL Ghostscript]] > 8.60}}

* [[ESP Ghostscript]]
* [[AFPL Ghostscript]]
* [[GPL Ghostscript]]

Libpcap

2008-02-22T17:40:00Z

Hoeth:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
|http://www.tcpdump.org/release/libpcap-{{Libpcap-Version}}.tar.gz
|}

----

{{Package-Introduction|Libpcap provides a system-independent interface for user-level packet capture. It includes a portable framework for low-level network monitoring. Applications include network statistics collection, security monitoring, network debugging, etc.|http://www.tcpdump.org/}}

{{Note|Currently, compiling with Flex 2.5.34 results in a broken libpcap. With 2.5.33 there is no problems}}

== Dependencies ==

== Configuration Information ==

{|
|-
|''--enable-ipv6:'' enables full IPv6 support (e.g. capture filters)
|}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/libpcap-{{Libpcap-Version}} &&
install -v -m644 doc/*{html,txt} /usr/share/doc/libpcap-{{Libpcap-Version}}

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/libpcap-{{Libpcap-Version}} &&
install -v -m644 doc/*{html,txt} /usr/share/doc/libpcap-{{Libpcap-Version}}