CBLFS - User contributions [en]

Template:FLAC-Version

2007-03-31T09:10:54Z

Kalessin: Version Updated.

1.1.4

Template:Cairo-Version

2007-03-31T04:57:09Z

Kalessin: Version updated.

1.4.2

Subversion

2007-03-30T21:29:51Z

Kalessin: I added the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://subversion.tigris.org/downloads/subversion-deps-{{Subversion-Version}}.tar.bz2
|-valign="top"
!Download Source:
| http://subversion.tigris.org/downloads/subversion-{{Subversion-Version}}.tar.bz2
|}

----

== Introduction to Subversion ==

The goal of the Subversion project is to build a version control system that is a compelling replacement for CVS in the open source community. At the moment, the [http://www.linuxfromscratch.org/lfs/ LFS], [http://www.linuxfromscratch.org/blfs/ BLFS], and [http://trac.cross-lfs.org CLFS] projects all use subversion to maintain their books.

'''Project Home Page''': http://subversion.tigris.org/

== Dependencies ==

=== Required (If not using the subversion-deps package) ===
* [[APR]]
* [[APR-util]]
* [[neon]]

=== Optional ===
* [[Python]]
* [[Apache]]
* [[JDK]]
* [[JUnit]]
* [[Dante]]
* [[Jikes]]
* [[pkg-config]]
* [[expat]] or [[libXML2]]
* [[OpenSSL]]
* [[MIT krb5]] or [[Heimdal]]
* [[Berkeley DB]] or [[GDBM]]
* [[SWIG]]
* [[Ruby]]

== Non-Multilib ==

First, extract two tarballs into one directory.

Compile the package:

./configure --prefix=/usr --with-berkeley-db \
--with-installbuilddir=/usr/lib/apr-0 --with-ssl &&
make

One can safely drop --with-ssl flag to use system neon if exists.

Install the package:

make install &&
find doc -type d -exec chmod 755 {} \; &&
find doc -type f -exec chmod 644 {} \; &&
install -v -m755 -d /usr/share/doc/subversion-{{Subversion-Version}} &&
cp -v -R doc/* /usr/share/doc/subversion-{{Subversion-Version}}

== Multilib ==

First, extract two tarballs into one directory.

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32} -fPIC" CXX="g++ ${BUILD32} -fPIC" USE_ARCH=32 \
./configure --prefix=/usr --with-berkeley-db \
--with-installbuilddir=/usr/lib/apr-0 --with-ssl &&
make

One can safely drop --with-ssl flag to use system neon if exists.

If you built Subversion with the included apr and apr-util then remove previous links to the multiarch_wrapper if they exist because the install will over-write the multiarch_wrapper with the contents of apu-config instead of replacing apu-config:

rm -fv /usr/bin/ap{r,u}-config

Install the package

make install

If you built Subversion with the included apr and apr-util then run the following command:

mv -v /usr/bin/apr-config{,-32} &&
mv -v /usr/bin/apu-config{,-32}

If you build Subversion with the included neon the run the following command:

mv -v /usr/bin/neon-config{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32} -fPIC" CXX="g++ ${BUILDN32} -fPIC" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 --with-berkeley-db \
--with-installbuilddir=/usr/lib32/apr-0 --with-ssl &&
make

If you built Subversion with the included apr and apr-util then remove previous links to the multiarch_wrapper if they exist because the install will over-write the multiarch_wrapper with the contents of apu-config instead of replacing apu-config:

rm -fv /usr/bin/ap{r,u}-config

Install the package

make install

If you built Subversion with the included apr then run the following command:

mv -v /usr/bin/apr-config{,-n32} &&
mv -v /usr/bin/apu-config{,-n32}

If you build Subversion with the included neon the run the following command:

mv -v /usr/bin/neon-config{,-n32}

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64} -fPIC" CXX="g++ ${BUILD64} -fPIC" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 --with-berkeley-db \
--with-installbuilddir=/usr/lib64/apr-0 --with-ssl &&
make

If you built Subversion with the included apr and apr-util then remove previous links to the multiarch_wrapper if they exist because the install will over-write the multiarch_wrapper with the contents of apu-config instead of replacing apu-config:

rm -fv /usr/bin/ap{r,u}-config

Install the package

make install

If you built Subversion with the included apr then run the following command:

mv -v /usr/bin/apr-config{,-64} &&
mv -v /usr/bin/apu-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/apr-config &&
ln -sfv multiarch_wrapper /usr/bin/apu-config

If you build Subversion with the included neon the run the following command:

mv -v /usr/bin/neon-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/neon-config

=== Install Documents ===

Install the documents

find doc -type d -exec chmod 755 {} \; &&
find doc -type f -exec chmod 644 {} \; &&
install -v -m755 -d /usr/share/doc/subversion-{{Subversion-Version}} &&
cp -v -R doc/* /usr/share/doc/subversion-{{Subversion-Version}}

== Contents ==

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| svn, svnadmin, svndumpfilter, svnlook, svnserve, svnversion, and optionally, neon-config and apr-config
|-valign="top"
! Installed Libraries:
| libsvn*.{so,a} and optionally, libneon.{so,a} and the mod_dav_svn.so, and mod_authz_svn.so Apache HTTP DSO modules
|-valign="top"
! Installed Directories:
| /etc/subversion, /usr/include/neon (optional), /usr/include/subversion-1, /usr/lib/perl5/site_perl/5.8.8/i686-linux/auto/SVN (optional), /usr/lib/perl5/site_perl/5.8.8/i686-linux/SVN (optional), /usr/lib/svn-javahl (optional), /usr/lib/svn-python (optional), /usr/share/doc/neon-0.25.5 (optional), and /usr/share/doc/subversion-1.3.1
|}

=== Short Description ===

{| style="text-align: left;"
! svn
| is a command-line client program used to access Subversion repositories.
|-valign="top"
! svnadmin
| is a tool for creating, tweaking or repairing a Subversion repository.
|-valign="top"
! svndumpfilter
| is a program for filtering Subversion repository dumpfile format streams.
|-valign="top"
! svnlook
| is a tool for inspecting a Subversion repository.
|-valign="top"
! svnserve
| is a custom standalone server program, able to run as a daemon process or invoked by SSH.
|-valign="top"
! svnversion
| is used to report the version number and state of a working Subversion repository copy.
|-valign="top"
! neon-config
| is a script which provides information about an installed copy of the neon library.
|-valign="top"
! apr-config
| ???
|-valign="top"
! libsvn_*.{so,a}
| are the support libraries used by the Subversion programs.
|-valign="top"
! libneon.{so,a}
| is used as a high-level interface to common HTTP and WebDAV methods.
|-valign="top"
! mod_authz_svn.so
| is a plug-in module for the Apache HTTP server, used to authenticate users to a Subversion repository over the Internet or an intranet.
|-valign="top"
! mod_dav_svn.so
| is a plug-in module for the Apache HTTP server, used to make a Subversion repository available to others over the Internet or an intranet.
|}

CVS

2007-03-30T21:20:15Z

Kalessin: I added the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.gnu.org/non-gnu/cvs/source/stable/{{CVS-Version}}/cvs-{{CVS-Version}}.tar.bz2
|-valign="top"
!Download Patch:
| http://www.linuxfromscratch.org/patches/blfs/svn/cvs-{{CVS-Version}}-zlib-1.patch
|}

----

== Introduction to CVS ==

The Concurrent Versioning System (CVS) is a version control system, an important component of Source Configuration Management (SCM). Using it, you can record the history of sources files, and documents. It is primarily used in software development. Note however, that [[Subversion]] - which aims to improve over CVS - is increasingly being used instead of CVS.

'''Project Home Page''': http://www.nongnu.org/cvs/

== Dependencies ==

=== Optional ===
* [[GDBM]]
* [[Tcsh]]
* [[OpenSSH]]
* [[krb4]]
* [[MIT krb5]] or [[Heimdal]]
* [[Ghostscript]]
* [[MTA]] (Mail Transfer Agent)

== Non-Multilib ==

By default CVS is statically linked against the Zlib library included in its source tree. This makes it exposed to possible security vulnerabilities in that library. If you want to modify CVS to use the system shared Zlib library, apply the following patch:

patch -Np1 -i ../cvs-{{CVS-Version}}-zlib-1.patch

Install CVS by running the following commands:

./configure --prefix=/usr &&
make

Now, as the root user:

make install &&
install -v -m755 -d /usr/share/doc/cvs-{{CVS-Version}} &&
install -v -m644 FAQ README /usr/share/doc/cvs-{{CVS-Version}} &&
install -v -m644 doc/*.pdf /usr/share/doc/cvs-{{CVS-Version}}

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

By default CVS is statically linked against the Zlib library included in its source tree. This makes it exposed to possible security vulnerabilities in that library. If you want to modify CVS to use the system shared Zlib library, apply the following patch:

patch -Np1 -i ../cvs-{{CVS-Version}}-zlib-1.patch

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install

=== Install Documents ===

Install the documents

install -v -m755 -d /usr/share/doc/cvs-{{CVS-Version}} &&
install -v -m644 FAQ README /usr/share/doc/cvs-{{CVS-Version}} &&
install -v -m644 doc/*.pdf /usr/share/doc/cvs-{{CVS-Version}}

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| cvs, cvsbug, and rcs2log
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| /usr/share/cvs and /usr/share/doc/cvs-{{CVS-Version}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! cvs
| is the main program file for the concurrent versions system.
|-valign="top"
! cvsbug
| is used to send problem reports about CVS to a central support site.
|-valign="top"
! rcs2log
| is a symlink to the contributed RCS to Change Log generator.
|}

MadWifi

2007-03-30T20:39:54Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://svn.madwifi.org/trunk
|-
|
| http://snapshots.madwifi.org/madwifi-ng-current.tar.gz
|}

----

== Introduction to MadWifi ==

MadWifi is short for Multiband Atheros Driver for Wireless Fidelity. In other words: this project provides a Linux kernel device driver for Atheros-based Wireless LAN devices. The driver works such that your WLAN card will appear as a normal network interface in the system. Additionally there is support for the Wireless Extensions API. This allows you to configure the device using common wireless tools (ifconfig, iwconfig and friends).[http://madwifi.org/wiki/MadWifi]

'''Project Home Page''': http://madwifi.org/wiki/MadWifi

== Getting the source ==

If you have [[Subversion]] installed issue the following command to download the source:

svn checkout http://svn.madwifi.org/trunk madwifi

You may also want to create a tarball to use at a later time:

tar cvjpf madwifi-r$(svnversion madwifi).tar.bz2 madwifi

== Dependencies ==

=== Required ===
* [[Subversion]] (To Get Source)
* Kernel Source

== Non-Running Kernel ==

If you're attempting to build Madwifi for a kernel that's not currently running, also pass the following to '''make''' and '''make install'''.

KERNELPATH=/path/to/kernel/source

'''KERNELPATH''' defaults to '''/lib/modules/`uname -r`/build'''.

== Non-Multilib ==

Compile the package:

make

Install the package

make BINDIR=/usr/bin MANDIR=/usr/share/man install

== Multilib ==

Please Contribute this section.

K3b

2007-03-30T20:37:42Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://prdownloads.sourceforge.net/k3b/k3b-{{K3b-Version}}.tar.bz2
|}

----

== Introduction to K3b ==

K3b was created to be a feature-rich and easy to handle CD and DVD burning application. It is the main CD/DVD burning application for [[KDE]]. For a feature list, see http://k3b.plainblack.com/about.

'''Project Home Page''': http://k3b.plainblack.com/

== Dependencies ==

=== Required ===
* [[KdeLibs]]
=== Recommended ===
* [[KdeBase]]
* [[libjpeg]]
* [[KdeMultimedia]]

=== Optional ===
* [[ALSA]]
* [[CDParanoia-III]]
* [[FFmpeg]]
* [[FLAC]]
* [[HAL]] and [[D-BUS Qt3]]
* [[LAME]]
* [[libmad]]
* [[libMusicBrainz]]
* [[libvorbis]]
* [[LibXML2]]
* [[Transcode]]
* [[libsndfile]]
* [[MoviX]]
* [[Musepack]]
* [[normalize]]
* [[resmgr]]
* [[Secret Rabbit Code]]
* [[SoX]]
* [[TagLib]]
* [[vcdimager]]

=== Required Runtime ===
* [[Cdrtools]]
* [[dvd-rw-tools]]
* [[Cdrdao]]
=== Required Runtime (For Dvd Ripping and Encoding) ===
* [[Transcode]]
* [[XviD]]
* [[libdvdread]]
* [[libdvdcss]]

== Non-Multilib ==

Compile the package:

./configure --prefix=${KDE_PREFIX} \
--sysconfdir=/etc/kde \
--disable-debug \
--disable-dependency-tracking &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=${KDE_PREFIX} \
--sysconfdir=/etc/kde \
--disable-debug \
--disable-dependency-tracking &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=${KDE_PREFIX} \
--sysconfdir=/etc/kde \
--disable-debug \
--disable-dependency-tracking &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=${KDE_PREFIX} \
--sysconfdir=/etc/kde \
--disable-debug \
--disable-dependency-tracking &&
make

Install the package

make install

JadeTeX

2007-03-30T20:31:32Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/jadetex/jadetex-{{JadeTeX-Version}}.tar.gz
|}

----

== Introduction to JadeTex ==

This is a TeX macro package for processing the output from Jade/OpenJade in TeX (-t) mode.

'''Project Home Page''': http://jadetex.sourceforge.net/

== Dependencies ==

=== Required ===
* [[teTeX]]
* [[OpenJade]]

== Non-Multilib or Multilib ==

Make some required modifications to the texmf.cnf file already installed on the system by the teTeX package, then build a new latex.fmt file using the following commands:

sed -i.orig -e "s/original texmf.cnf/modified texmf.cnf/" \
-e "s/memory hog.../&\npool_size.context = 750000/" \
$(kpsewhich texmf.cnf) &&
cat >> $(kpsewhich texmf.cnf) << "EOF"

% The following 3 sections added for JadeTeX

% latex settings
main_memory.latex = 1100000
param_size.latex = 1500
stack_size.latex = 1500
hash_extra.latex = 15000
string_vacancies.latex = 45000
pool_free.latex = 47500
nest_size.latex = 500
save_size.latex = 5000
pool_size.latex = 500000
max_strings.latex = 55000
font_mem_size.latex= 400000

% jadetex settings
main_memory.jadetex = 1500000
param_size.jadetex = 1500
stack_size.jadetex = 1500
hash_extra.jadetex = 50000
string_vacancies.jadetex = 45000
pool_free.jadetex = 47500
nest_size.jadetex = 500
save_size.jadetex = 5000
pool_size.jadetex = 500000
max_strings.jadetex = 55000

% pdfjadetex settings
main_memory.pdfjadetex = 2500000
param_size.pdfjadetex = 1500
stack_size.pdfjadetex = 1500
hash_extra.pdfjadetex = 50000
string_vacancies.pdfjadetex = 45000
pool_free.pdfjadetex = 47500
nest_size.pdfjadetex = 500
save_size.pdfjadetex = 5000
pool_size.pdfjadetex = 500000
max_strings.pdfjadetex = 55000

EOF
LATEX_FMT_DIR="$(kpsewhich -expand-var '$TEXMFSYSVAR')/web2c" &&
mv -v $(kpsewhich latex.fmt) $(kpsewhich latex.fmt).orig &&
mv -v $LATEX_FMT_DIR/latex.log $LATEX_FMT_DIR/latex.log.orig &&
fmtutil-sys --byfmt latex

Compile the package:

make

Install the package:

install -v -m755 -d \
$(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &&
install -v -m644 dsssl.def jadetex.ltx *.sty \
$(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex &&
install -v -m644 {,pdf}jadetex.ini \
$(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &&
FMTUTIL_CNF="$(kpsewhich fmtutil.cnf)" &&
mv $FMTUTIL_CNF $FMTUTIL_CNF.orig &&
cat $FMTUTIL_CNF.orig - >> $FMTUTIL_CNF << "EOF"

# JadeTeX formats:
jadetex etex - "&latex" jadetex.ini
pdfjadetex pdfetex - "&pdflatex" pdfjadetex.ini

EOF
mv -v $(kpsewhich -expand-var '$TEXMFMAIN')/ls-R \
$(kpsewhich -expand-var '$TEXMFMAIN')/ls-R.orig &&
mv -v $(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R \
$(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R.orig &&
mktexlsr &&
fmtutil-sys --byfmt jadetex &&
fmtutil-sys --byfmt pdfjadetex &&
mktexlsr &&
ln -v -sf etex /usr/bin/jadetex &&
ln -v -sf pdfetex /usr/bin/pdfjadetex &&
install -v -m644 -D index.html \
/usr/share/doc/jadetex-{{JadeTeX-Version}}/index.html &&
install -v -m644 *.1 /usr/share/man/man1

Wine

2007-03-30T20:20:04Z

Kalessin: I added the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/wine/wine-{{Wine-Version}}.tar.bz2
|}

----

'''''Remember that Wine is not an emulator therefore it will only work on x86 or x86_64 Multilib systems.'''''

== Introduction to Wine ==

Wine is an Open Source implementation of the Windows API on top of X and Unix.

Think of Wine as a compatibility layer for running Windows programs. Wine does not require Microsoft Windows, as it is a completely free alternative implementation of the Windows API consisting of 100% non-Microsoft code, however Wine can optionally use native Windows DLLs if they are available. Wine provides both a development toolkit for porting Windows source code to Unix as well as a program loader, allowing many unmodified Windows programs to run on x86-based Unixes, including Linux, FreeBSD, Mac OS X, and Solaris.

'''Project Home Page''': http://www.winehq.org

== Dependencies ==

=== Required ===

=== Recomended ===
* [[X Window System]]
* [[FreeType]]
* [[FontForge]]
=== Optional ===
* [[Pkg-config]]
* [[LibXML2]]
* [[HAL]]
* [[SANE]]
* [[libgphoto2]]
* [[CUPS]]
* [[libicu]]
* [[little cms]]
* [[OpenLDAP]]
* [[NAS]]
* [[aRts]]
* [[EsounD]]
* [[AudioIO]]

== Non-Multilib x86 ==

Compile the package:

./configure --prefix=/opt/wine-{{Wine-Version}} --disable-debug &&
make depend &&
make

Install the package

make install &&
ln -sfvn wine-{{Wine-Version}} /opt/wine

== Multilib x86_64 ==

=== For running 32bit apps ===

Compile the package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/opt/wine-{{Wine-Version}} --disable-debug &&
make depend &&
make

Install the package

make install &&
ln -sfvn wine-{{Wine-Version}} /opt/wine

=== For running 64bit apps (Not Worth It) ===
See http://www.winehq.com/pipermail/wine-devel/2006-June/048758.html for more information. If you would like to build it anyway don't let this warning stop you.

Compile the package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/opt/wine-{{Wine-Version}} --enable-win64 --disable-debug &&
make depend &&
make

Install the package

make install &&
ln -sfvn wine-{{Wine-Version}} /opt/wine

== Configuration ==

=== 50-wine.sh ===

If you're using the [[Bash Startup Files]] create an addition for them with the following command:

cat > /etc/profile.d/50-wine.sh << "EOF"
# Begin /etc/profile.d/50-wine.sh

export PATH="${PATH}:/opt/wine/bin"
export XDG_DATA_DIRS="${XDG_DATA_DIRS}${XDG_DATA_DIRS+:}/opt/wine/share"

# End /etc/profile.d/50-wine.sh
EOF

Simple config
/opt/wine/bin/winecfg

JadeTeX

2007-03-30T20:16:35Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/jadetex/jadetex-{{JadeTeX-Version}}.tar.gz
|}

----

== Introduction to JadeTex ==

The JadeTeX package is a companion package to the OpenJade DSSSL processor. JadeTeX transforms high level LaTeX macros into DVI/PostScript and Portable Document Format (PDF) forms.

'''Project Home Page''': http://jadetex.sourceforge.net/

== Dependencies ==

=== Required ===
* [[teTeX]]
* [[OpenJade]]

== Non-Multilib or Multilib ==

Make some required modifications to the texmf.cnf file already installed on the system by the teTeX package, then build a new latex.fmt file using the following commands:

sed -i.orig -e "s/original texmf.cnf/modified texmf.cnf/" \
-e "s/memory hog.../&\npool_size.context = 750000/" \
$(kpsewhich texmf.cnf) &&
cat >> $(kpsewhich texmf.cnf) << "EOF"

% The following 3 sections added for JadeTeX

% latex settings
main_memory.latex = 1100000
param_size.latex = 1500
stack_size.latex = 1500
hash_extra.latex = 15000
string_vacancies.latex = 45000
pool_free.latex = 47500
nest_size.latex = 500
save_size.latex = 5000
pool_size.latex = 500000
max_strings.latex = 55000
font_mem_size.latex= 400000

% jadetex settings
main_memory.jadetex = 1500000
param_size.jadetex = 1500
stack_size.jadetex = 1500
hash_extra.jadetex = 50000
string_vacancies.jadetex = 45000
pool_free.jadetex = 47500
nest_size.jadetex = 500
save_size.jadetex = 5000
pool_size.jadetex = 500000
max_strings.jadetex = 55000

% pdfjadetex settings
main_memory.pdfjadetex = 2500000
param_size.pdfjadetex = 1500
stack_size.pdfjadetex = 1500
hash_extra.pdfjadetex = 50000
string_vacancies.pdfjadetex = 45000
pool_free.pdfjadetex = 47500
nest_size.pdfjadetex = 500
save_size.pdfjadetex = 5000
pool_size.pdfjadetex = 500000
max_strings.pdfjadetex = 55000

EOF
LATEX_FMT_DIR="$(kpsewhich -expand-var '$TEXMFSYSVAR')/web2c" &&
mv -v $(kpsewhich latex.fmt) $(kpsewhich latex.fmt).orig &&
mv -v $LATEX_FMT_DIR/latex.log $LATEX_FMT_DIR/latex.log.orig &&
fmtutil-sys --byfmt latex

Compile the package:

make

Install the package:

install -v -m755 -d \
$(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &&
install -v -m644 dsssl.def jadetex.ltx *.sty \
$(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex &&
install -v -m644 {,pdf}jadetex.ini \
$(kpsewhich -expand-var '$TEXMFLOCAL')/tex/jadetex/config &&
FMTUTIL_CNF="$(kpsewhich fmtutil.cnf)" &&
mv $FMTUTIL_CNF $FMTUTIL_CNF.orig &&
cat $FMTUTIL_CNF.orig - >> $FMTUTIL_CNF << "EOF"

# JadeTeX formats:
jadetex etex - "&latex" jadetex.ini
pdfjadetex pdfetex - "&pdflatex" pdfjadetex.ini

EOF
mv -v $(kpsewhich -expand-var '$TEXMFMAIN')/ls-R \
$(kpsewhich -expand-var '$TEXMFMAIN')/ls-R.orig &&
mv -v $(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R \
$(kpsewhich -expand-var '$TEXMFSYSVAR')/ls-R.orig &&
mktexlsr &&
fmtutil-sys --byfmt jadetex &&
fmtutil-sys --byfmt pdfjadetex &&
mktexlsr &&
ln -v -sf etex /usr/bin/jadetex &&
ln -v -sf pdfetex /usr/bin/pdfjadetex &&
install -v -m644 -D index.html \
/usr/share/doc/jadetex-{{JadeTeX-Version}}/index.html &&
install -v -m644 *.1 /usr/share/man/man1

LibOFX

2007-03-30T20:14:09Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/libofx/libofx-{{LibOFX-Version}}.tar.gz
|}

----

== Introduction to LibOFX ==

LibOFX is a generic library to allow financial software to easily support the [http://www.ofx.net/ofx/default.asp Open Financial eXchange specification]. It can be used with financial programs such as [[GnuCash]] and [[KMyMoney]].

'''Project Home Page''': http://libofx.sourceforge.net/

== Dependencies ==

=== Required ===
* [[OpenSP]]

=== Recommended ===
* [[curl]]

=== Optional ===
* [[doxygen]]
* [[libxml++]]
* [[Gengetopt]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --disable-dependency-tracking
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr --disable-dependency-tracking &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 \
--with-opensp-libs=/usr/lib32 \
--disable-dependency-tracking &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 \
--with-opensp-libs=/usr/lib64 \
--disable-dependency-tracking &&
make

Install the package:

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| ofxconnect, ofxdump, ofx2qif
|-valign="top"
! Installed Libraries:
| libofx.{a,la,so}
|-valign="top"
! Installed Directories:
| /usr/include/libofx
|}

AqBanking

2007-03-30T20:09:45Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/aqbanking/aqbanking-{{aqbanking-Version}}.tar.gz
|}

----

== Introduction to AqBanking ==

AqBanking is a modular and generic interface to online banking tasks, financial file formats (import/export) and bank/country/currency information. It provides frontends for [[Qt]], [[KDE]], [[GTK]], and console. Financial programs such as [[GnuCash]] and [[KMyMoney]] can use it for online banking.

'''Project Home Page''': http://www.aquamaniac.de/aqbanking/

== Dependencies ==

=== Required ===
* [[KdeLibs]]
* [[Libglade]]

=== Recommended ===
* [[gwenhywfar]]
* [[libchipcard]]
* [[LibOFX]]

=== Optional ===
* [[doxygen]]

== Configuration Information ==

If you do not have [[Libglade]] installed add the following to configure:

--with-frontends="cbanking qbanking kbanking"

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH32}" \
./configure --prefix=/usr --with-kde3-libs=${KDE_PREFIX}/lib \
--with-qt3-libs=${QTDIR}/lib &&
make

Install the package

make install &&
unset USE_ARCH &&
for f in {,src/{frontends,plugins/backends}/*/}*-config; do
mv -v /usr/bin/$(basename $f){,-32};
done

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH32}" \
./configure --prefix=/usr --libdir=/usr/lib32 \
--with-kde3-libs=${KDE_PREFIX}/lib32 \
--with-qt3-libs=${QTDIR}/lib32 &&
make

Install the package

make install &&
unset USE_ARCH &&
for f in {,src/{frontends,plugins/backends}/*/}*-config; do
mv -v /usr/bin/$(basename $f){,-n32};
done

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="$PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 \
--with-kde3-libs=${KDE_PREFIX}/lib64 \
--with-qt3-libs=${QTDIR}/lib64 &&
make

Install the package

make install &&
unset USE_ARCH &&
for f in {,src/{frontends,plugins/backends}/*/}*-config; do
mv -v /usr/bin/$(basename $f){,-64};
ln -sfv multiarch_wrapper /usr/bin/$(basename $f)
done

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| aqbanking-config, aqbanking-tool, cbanking-config, kbanking-config, qbanking-config, g2banking-config, aqdtaus-config, aqgeldkarte-config, aqhbci-config, aqofxconnect-config,
|-valign="top"
! Installed Libraries:
| libaqbanking.{la,so}
|-valign="top"
! Installed Directories:
| /usr/lib/aqbanking, /usr/include/aqbanking
|}

KMyMoney

2007-03-30T20:02:30Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://downloads.sourceforge.net/kmymoney2/kmymoney2-{{kmymoney-Version}}.tar.bz2
|}

----

== Intrduction to KMyMoney ==

KMyMoney is the Personal Finance Manager for the wonderful [[KDE]]. It operates similar to MS-Money, supports different account types, categorisation of expenses and incomes, reconciliation of bank accounts and QIF import/export.

'''Project Home Page''': http://kmymoney2.sourceforge.net/index-home.html

== Dependencies ==

=== Required ===
* [[KdeLibs]]
=== Recommended ===
* [[KdeBase]]
* [[LibOFX]]
* [[AqBanking]]
* [[OpenSP]]
* [[LibXML2]]
* [[GnuPG]]

=== Optional ===
* [[CppUnit]]

== Non-Multilib ==

Compile the package:

./configure --prefix=${KDE_PREFIX} \
--sysconfdir=/etc/kde \
--disable-debug \
--disable-dependency-tracking \
--enable-kbanking --enable-ofxbanking &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=${KDE_PREFIX} \
--sysconfdir=/etc/kde \
--enable-libsuffix=none \
--disable-debug \
--disable-dependency-tracking \
--enable-kbanking --enable-ofxbanking &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=${KDE_PREFIX} \
--sysconfdir=/etc/kde \
--enable-libsuffix=32 \
--disable-debug \
--disable-dependency-tracking \
--enable-kbanking --enable-ofxbanking &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===
Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=${KDE_PREFIX} \
--sysconfdir=/etc/kde \
--enable-libsuffix=64 \
--disable-debug \
--disable-dependency-tracking \
--enable-kbanking --enable-ofxbanking &&
make

Install the package

make install &&
unset USE_ARCH

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| kmymoney2
|-valign="top"
! Installed Libraries:
| libkmm_mymoney.{la,so}, libkmm_plugin.{la,so}
|-valign="top"
! Installed Directories:
| ${KDE_PREFIX}/include/kmymoney
|}

Koffice

2007-03-30T20:00:27Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.kde.org/pub/kde/stable/koffice-1.6.1/src/koffice-{{koffice-Version}}.tar.bz2
|}

----

== Introduction to Koffice ==

KOffice is a free, integrated office suite for [[KDE]].

'''Project Home Page''': http://www.koffice.org/

== Dependencies ==

=== Required ===
* [[KdeLibs]]
=== Recommended ===
* [[KdeBase]]
* [[Wv2]]
* [[libwpd]]
* [[GraphicsMagick]] or [[ImageMagick]]
* [[libpqxx]]
* [[MySQL]]
=== Optional ===
* [[doxygen]]
* [[OpenEXR]]
* [[libexif]]
* [[Poppler]]
* [[libpaper]]
* [[LibXML2]]
* [[LibXSLT]]
* [[libart_lgpl]]
* [[Python]]
* [[Ruby]]

== Non-Multilib ==

Compile the package:

./configure --prefix=${KDE_PREFIX} --sysconfdir=/etc/kde \
--disable-debug --disable-dependency-tracking &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=${KDE_PREFIX} --sysconfdir=/etc/kde \
--disable-debug --disable-dependency-tracking &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=${KDE_PREFIX} --sysconfdir=/etc/kde \
--enable-libsuffix=32 --disable-debug \
--disable-dependency-tracking &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=${KDE_PREFIX} --sysconfdir=/etc/kde \
--enable-libsuffix=64 --disable-debug \
--disable-dependency-tracking &&
make

Install the package

make install &&
unset USE_ARCH

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| karbon kchart kexi kformula kivio koconverter koshell kplato kprconverter.pl kpresenter krita krossrunner kspread ksqlite ksqlite2 ksqlite2to3 kthesaurus kudesigner kugar kword
|-valign="top"
! Installed Libraries:
| libkarboncommon.so libkchartcommon.so libkchartimageexport.so libkdchart.so libkdeinit_karbon.so libkdeinit_kchart.so libkdeinit_kexi.so libkdeinit_kformula.so libkdeinit_kivio.so libkdeinit_koshell.so libkdeinit_kplato.so libkdeinit_kpresenter.so libkdeinit_krita.so libkdeinit_kspread.so libkdeinit_kthesaurus.so libkdeinit_kudesigner.so libkdeinit_kugar.so libkdeinit_kword.so libkexicore.so libkexidatatable.so libkexidbparser.so libkexidb.so libkexiextendedwidgets.so libkexiformutils.so libkexiguiutils.so libkeximain.so libkeximigrate.so libkexirelationsview.so libkexisql2.so libkexisql3.so libkexiutils.so libkformdesigner.so libkformulalib.so libkiviocommon.so libkochart.so libkofficecore.so libkofficeui.so libkopainter.so libkopalette.so libkoproperty.so libkotext.so libkowmf.so libkpresenterimageexport.so libkpresenterprivate.so libkrita_cmyk_u16.so libkritacolor.so libkritacommon.so libkritagrayscale.so libkrita_gray_u16.so libkritaimage.so libkrita_lms_f32.so libkrita_rgb_f16half.so libkrita_rgb_f32.so libkritargb.so libkrita_rgb_u16.so libkritascripting.so libkritaui.so libkrita_ycbcr_u16.so libkrita_ycbcr_u8.so libkrossapi.so libkrossmain.so libkspreadcommon.so libkstore.so libkudesignercore.so libkugarlib.so libkwmailmerge_interface.so libkwmf.so libkwordexportfilters.so libkwordprivate.so
|-valign="top"
! Installed Directories:
| None
|}

Cairo

2007-03-30T18:12:09Z

Kalessin: Reverted edits by Kalessin (Talk); changed back to last version by Jciccone

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://cairographics.org/releases/cairo-{{Cairo-Version}}.tar.gz
|}

----

== Introduction to Cairo ==

Cairo is a 2D graphics library with support for multiple output devices. Currently supported output targets include the X Window System, Win32, image buffers, and PostScript, PDF, and SVG file output. Experimental backends include OpenGL (through [[Glitz]]), Quartz, and XCB.

Cairo is designed to produce consistent output on all output media while taking advantage of display hardware acceleration when available (eg. through the X Render Extension).

The [http://www.cairographics.org/manual Cairo API] provides operations similar to the drawing operators of PostScript and PDF. Operations in Cairo including stroking and filling cubic Bézier splines, transforming and compositing translucent images, and antialiased text rendering. All drawing operations can be transformed by any affine transformation (scale, rotation, shear, etc.)

Cairo is implemented as a library written in the C programming language, but bindings are available for several different programming languages.

'''Project Home Page''': http://cairographics.org/

== Dependencies ==

=== Required ===
* [[X Window System]]
* [[pkg-config]]
=== Optional ===
* [[DirectFB]]
* [[Glitz]]
* [[XCB]]
* [[Gtk-Doc]]
* [[Poppler]]
* [[librsvg]]

== Additional Configuration Options ==

''--enable-xcb'': Enable Cairo's [[XCB]] backend.

''--enable-glitz'': Enable Cairo's [[Glitz]] backend.

''--enable-directfb'': Enable cairo's [[DirectFB]] backend.

''--enable-gtk-doc'': Use [[Gtk-Doc]] to build documentation.

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" \
USE_ARCH=32 ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" \
USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" \
USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| None
|-valign="top"
! Installed Libraries:
| libcairo.{a,la,so}
|-valign="top"
! Installed Directory:
| /usr/include/cairo
|}

Cairo

2007-03-30T18:11:44Z

Kalessin: Reverted edits by Jciccone (Talk); changed back to last version by Chipster19

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://cairographics.org/releases/cairo-{{Cairo-Version}}.tar.gz
|}

----

== Introduction to Cairo ==

Cairo is a 2D graphics library with support for multiple output devices. Currently supported output targets include the X Window System, Win32, image buffers, and PostScript, PDF, and SVG file output. Experimental backends include OpenGL (through [[Glitz]]), Quartz, and XCB.

Cairo is designed to produce consistent output on all output media while taking advantage of display hardware acceleration when available (eg. through the X Render Extension).

The [http://www.cairographics.org/manual Cairo API] provides operations similar to the drawing operators of PostScript and PDF. Operations in Cairo including stroking and filling cubic Bézier splines, transforming and compositing translucent images, and antialiased text rendering. All drawing operations can be transformed by any affine transformation (scale, rotation, shear, etc.)

Cairo is implemented as a library written in the C programming language, but bindings are available for several different programming languages.

'''Project Home Page''': http://cairographics.org/

== Dependencies ==

=== Required ===
* [[X Window System]]
* [[pkg-config]]
=== Optional ===
* [[DirectFB]]
* [[Glitz]]
* [[XCB]]
* [[Gtk-Doc]]

== Additional Configuration Options ==

''--enable-xcb'': Enable Cairo's [[XCB]] backend.

''--enable-glitz'': Enable Cairo's [[Glitz]] backend.

''--enable-directfb'': Enable cairo's [[DirectFB]] backend.

''--enable-gtk-doc'': Use [[Gtk-Doc]] to build documentation.

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="$PKG_CONFIG_PATH32" \
USE_ARCH=32 ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="$PKG_CONFIG_PATHN32" \
USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="$PKG_CONFIG_PATH64" \
USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| None
|-valign="top"
! Installed Libraries:
| libcairo.{a,la,so}
|-valign="top"
! Installed Directory:
| /usr/include/cairo
|}

Template:ESP Ghostscript-Version

2007-03-30T17:43:20Z

Kalessin: Version Updated.

{{ESP Ghostscript-Version2}}.4

Audacious-plugins

2007-02-06T08:44:11Z

Kalessin: I added a link to the project home page.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://audacious-media-player.org/release/audacious-plugins-{{Audacious-plugins Version}}.tgz
|}

----

== Introduction to Audacious Plugins ==

This a set of various plugins for the [[Audacious]] audio player. [[Audacious]] is useless without these.

'''Project Home Page''': http://audacious-media-player.org/Main_Page

== Dependencies ==

=== Required ===
* [[audacious]]

=== Optional ===
* [[TagLib]]
* [[Gtk2]]
* [[libglade]]
* [[GConf]]
* [[GNOME Virtual File System]]
* [[EsounD]]
* [[libnms]]
* [[Lirc]]
* [[libnotify]]
* [[libbinio]]
* [[libvorbis]]
* [[libogg]]
* [[FLAC]]
* [[JACK]]
* [[aRts]]
* [[libsidplay]]
* [[musepack]]
* [[ALSA]]
* [[timidity]]
* [[Glib2]]
* [[curl]]
* [[SDL]]
* [[LibXML2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

Audacious-plugins

2007-02-06T08:42:19Z

Kalessin: I added the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://audacious-media-player.org/release/audacious-plugins-{{Audacious-plugins Version}}.tgz
|}

----

== Introduction to Audacious Plugins ==

This a set of various plugins for the [[Audacious]] audio player. [[Audacious]] is useless without these.

== Dependencies ==

=== Required ===
* [[audacious]]

=== Optional ===
* [[TagLib]]
* [[Gtk2]]
* [[libglade]]
* [[GConf]]
* [[GNOME Virtual File System]]
* [[EsounD]]
* [[libnms]]
* [[Lirc]]
* [[libnotify]]
* [[libbinio]]
* [[libvorbis]]
* [[libogg]]
* [[FLAC]]
* [[JACK]]
* [[aRts]]
* [[libsidplay]]
* [[musepack]]
* [[ALSA]]
* [[timidity]]
* [[Glib2]]
* [[curl]]
* [[SDL]]
* [[LibXML2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

Audacious-plugins

2007-02-06T08:39:28Z

Kalessin: I upgraded the version number and moved it into a template.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://audacious-media-player.org/release/audacious-plugins-{{Audacious-plugins Version}}.tgz
|}

----

== Dependencies ==

=== Required ===
* [[audacious]]

=== Optional ===
* [[TagLib]]
* [[Gtk2]]
* [[libglade]]
* [[GConf]]
* [[GNOME Virtual File System]]
* [[EsounD]]
* [[libnms]]
* [[Lirc]]
* [[libnotify]]
* [[libbinio]]
* [[libvorbis]]
* [[libogg]]
* [[FLAC]]
* [[JACK]]
* [[aRts]]
* [[libsidplay]]
* [[musepack]]
* [[ALSA]]
* [[timidity]]
* [[Glib2]]
* [[curl]]
* [[SDL]]
* [[LibXML2]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

Template:Audacious-plugins Version

2007-02-06T08:38:57Z

Kalessin: I upgraded the version number and moved it into a template.

1.2.5

Template:Audacious-Version

2007-02-06T08:37:01Z

Kalessin: I updated the version number.

1.2.2

Audacious

2007-02-06T08:35:43Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://audacious-media-player.org/release/audacious-{{Audacious-Version}}.tgz
|}

----

== Introduction to Audacious ==

Audacious is a fork of the Beep Media Player (BMP is no longer in active development) which in turn was a fork of [[XMMS]]. Unlike [[XMMS]] however, Audacious is based on [[Gtk2]].

Audacious is an audio player that will play MP3 ([[LAME]]), Ogg Vorbis ([[libvorbis]]), [[FLAC]], and various other audio formats. It has various plugins that add additional functionality. And since it uses the same skins as [[XMMS]] and Winamp 2, there are quite a few skins out there to choose from.

'''Project Home Page''': http://audacious-media-player.org/Main_Page

== Dependencies ==

=== Required ===
*[[TagLib]]
*[[libglade]]

=== Optional ===
*[[GConf]]
*[[GNOME Virtual File System]]
*[[LibXML2]]
*[[libvisual]]
*[[SDL]]
*[[libvorbis]]
*[[libogg]]
*[[FLAC]]
*[[ALSA]]
*[[EsounD]]

It is recommended that after installing Audacious you install the [[audacious-plugins]] package.

== Configuration Information ==

If you want to enable gnome support, add the following to the configure line:

--enable-gconf --enable-gnome-vfs

== Non-Multilib ==

Configure and compile the package:

./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Configure and compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Configure and compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Configure and compile the package:
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install

XMMS

2007-02-06T08:15:46Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.xmms.org/files/{{XMMS-Version2}}.x/xmms-{{XMMS-Version}}.tar.bz2
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/xmms/xmms-{{XMMS-Version}}-gcc4-1.patch
|}

----

== Introduction to XMMS ==

XMMS is a Winamp 2 clone for the X Windows System. As such, it's an audio player that will play MP3 ([[LAME]]), Ogg Vorbis ([[libvorbis]]), [[FLAC]], and various other audio formats. It has various plugins that add additional functionality. And since it uses Winamp 2 skins, there are quite a few skins out there to choose from.

One thing to note however, is that XMMS is based on [[Gtk1]]. It is currently the only package in CBLFS that requires [[Gtk1]] (as opposed to having it as an optional dependency). It has not moved to [[Gtk2]] in order to avoid breaking compatibility with its plugins. If you wish to have a [[Gtk2]]-based audio player that is based on XMMS, then install [[Audacious]].

'''Project Home Page''': http://www.xmms.org/

== Dependencies ==

=== Required ===
* [[Gtk1]]
=== Optional ===
* [[ALSA]]
* [[EsounD]]
* [[libvorbis]]
* [[libmikmod]]

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../xmms-{{XMMS-Version}}-gcc4-1.patch &&
./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

patch -Np1 -i ../xmms-{{XMMS-Version}}-gcc4-1.patch &&
CC="gcc ${BUILD32}" USE_ARCH=32 ./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/xmms-config{,-32}

=== N32 ===

Compile the package:

patch -Np1 -i ../xmms-{{XMMS-Version}}-gcc4-1.patch &&
sed -i "/_LIBS=/s:/lib:&32:g" configure &&
CC="gcc ${BUILDN32}" USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 &&
sed -i -e "/sys_lib_search_path_spec/s:/lib:&32:g" \
-e "/sys_lib_dlsearch_path_spec/s:lib:&32:g" libtool &&
make

Install the package

make install &&
mv -v /usr/bin/xmms-config{,-n32}

=== 64Bit ===

Compile the package:

patch -Np1 -i ../xmms-{{XMMS-Version}}-gcc4-1.patch &&
sed -i "/_LIBS=/s:/lib:&64:g" configure &&
CC="gcc ${BUILD64}" USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 &&
sed -i -e "/sys_lib_search_path_spec/s:/lib:&64:g" \
-e "/sys_lib_dlsearch_path_spec/s:lib:&64:g" libtool &&
make

Install the package

make install &&
mv -v /usr/bin/xmms-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/xmms-config &&
install -v -m755 -d /usr/share/doc/xmms-1.2.10 &&
install -v -m644 FAQ README /usr/share/doc/xmms-1.2.10

TagLib

2007-02-06T07:32:13Z

Kalessin: I added the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://developer.kde.org/~wheeler/files/src/taglib-{{TagLib-Version}}.tar.gz
|}

== Introduction to TagLib ==

TagLib is a library for reading and editing the meta-data of several popular audio formats. Currently it supports both ID3v1 and ID3v2 for MP3 ([[LAME]]) files, Ogg Vorbis ([[libvorbis]]) comments and ID3 tags and Vorbis comments in [[FLAC]] files as well as MPC.

'''Project Home Page''': http://developer.kde.org/~wheeler/taglib.html

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/taglib-config{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/taglib-config{,-n32}

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/taglib-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/taglib-config

SDL

2007-02-06T06:53:52Z

Kalessin: I added instructions for installing the documentation.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.libsdl.org/release/SDL-{{SDL-Version}}.tar.gz
|}

----

== Introduction to SDL ==

Simple DirectMedia Layer is a cross-platform multimedia library designed to provide low level access to audio, keyboard, mouse, joystick, 3D hardware via OpenGL, and 2D video framebuffer.

SDL is written in C, but works with C++ natively, and has bindings to several other languages, including Ada, C# ([[Mono]]), Eiffel, Erlang, Euphoria, [[Guile]], Haskell, Java ([[JDK]]), Lisp, Lua, ML, Objective C, Pascal, Perl, [[PHP]], Pike, Pliant, [[Python]], [[Ruby]], and Smalltalk.

'''Project Home Page''': http://www.libsdl.org/

== Dependencies ==

=== Optional ===
* [[ALSA]]
* [[EsounD]]
* [[aRts]]
* [[NAS]]
* [[NASM]]
* [[X Window System]]
* [[AAlib]]
* [[DirectFB]]
* [[SVGAlib]]
* [[GNU Pth]]
* [[PicoGUI]]

== Non-Multilib ==

If your [[X Window System]] is anything other then /usr/X11R6 then run the following command to adjust the sources:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $(grep -lr /usr/X11R6 *)

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

Install the documentation:

install -dv -m755 /usr/share/doc/SDL-1.2.11/html &&
install -v -m644 docs/html/*.html /usr/share/doc/SDL-1.2.11/html

== Multilib ==

=== 32Bit ===

If your [[X Window System]] is anything other then /usr/X11R6 then run the following command to adjust the sources:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $(grep -lr /usr/X11R6 *)

Compile the package:

CC="gcc ${BUILD32}" USE_ARCH=32 ./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/sdl-config{,-32}

=== N32 ===

If your [[X Window System]] is anything other then /usr/X11R6 then run the following command to adjust the sources:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $(grep -lr /usr/X11R6 *)

Compile the package:

sed -i "/-laudio/s:/lib:&32:g" configure &&
CC="gcc ${BUILDN32}" USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/sdl-config{,-n32}

=== 64Bit ===

If your [[X Window System]] is anything other then /usr/X11R6 then run the following command to adjust the sources:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $(grep -lr /usr/X11R6 *)

Compile the package:

sed -i "/-laudio/s:/lib:&64:g" configure &&
CC="gcc ${BUILD64}" USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/sdl-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/sdl-config

Install the documentation:

install -dv -m755 /usr/share/doc/SDL-1.2.11/html &&
install -v -m644 docs/html/*.html /usr/share/doc/SDL-1.2.11/html

SDL

2007-02-06T06:35:14Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.libsdl.org/release/SDL-{{SDL-Version}}.tar.gz
|}

----

== Introduction to SDL ==

Simple DirectMedia Layer is a cross-platform multimedia library designed to provide low level access to audio, keyboard, mouse, joystick, 3D hardware via OpenGL, and 2D video framebuffer.

SDL is written in C, but works with C++ natively, and has bindings to several other languages, including Ada, C# ([[Mono]]), Eiffel, Erlang, Euphoria, [[Guile]], Haskell, Java ([[JDK]]), Lisp, Lua, ML, Objective C, Pascal, Perl, [[PHP]], Pike, Pliant, [[Python]], [[Ruby]], and Smalltalk.

'''Project Home Page''': http://www.libsdl.org/

== Dependencies ==

=== Optional ===
* [[ALSA]]
* [[EsounD]]
* [[aRts]]
* [[NAS]]
* [[NASM]]
* [[X Window System]]
* [[AAlib]]
* [[DirectFB]]
* [[SVGAlib]]
* [[GNU Pth]]
* [[PicoGUI]]

== Non-Multilib ==

If your [[X Window System]] is anything other then /usr/X11R6 then run the following command to adjust the sources:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $(grep -lr /usr/X11R6 *)

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If your [[X Window System]] is anything other then /usr/X11R6 then run the following command to adjust the sources:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $(grep -lr /usr/X11R6 *)

Compile the package:

CC="gcc ${BUILD32}" USE_ARCH=32 ./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/sdl-config{,-32}

=== N32 ===

If your [[X Window System]] is anything other then /usr/X11R6 then run the following command to adjust the sources:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $(grep -lr /usr/X11R6 *)

Compile the package:

sed -i "/-laudio/s:/lib:&32:g" configure &&
CC="gcc ${BUILDN32}" USE_ARCH=n32 ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/sdl-config{,-n32}

=== 64Bit ===

If your [[X Window System]] is anything other then /usr/X11R6 then run the following command to adjust the sources:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $(grep -lr /usr/X11R6 *)

Compile the package:

sed -i "/-laudio/s:/lib:&64:g" configure &&
CC="gcc ${BUILD64}" USE_ARCH=64 ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/sdl-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/sdl-config

Doxygen

2007-02-05T09:51:02Z

Kalessin: I added addtional configuration options and added a note about DESTDIR.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.stack.nl/pub/users/dimitri/doxygen-{{Doxygen-Version}}.src.tar.gz
|}

----

== Introduction to Doxygen ==

Doxygen is a documentation system for C++, C, Java, Objective-C, Python, IDL (Corba and Microsoft flavors) and to some extent PHP, C#, and D.

It can generate an on-line documentation browser (in HTML) and/or an off-line reference manual (in '''LAT<big>E</big>X''') from a set of documented source files. There is also support for generating output in RTF (MS-Word), PostScript, hyperlinked PDF, compressed HTML, and Unix man pages. The documentation is extracted directly from the sources, which makes it much easier to keep the documentation consistent with the source code.

You can configure doxygen to extract the code structure from undocumented source files. This is very useful to quickly find your way in large source distributions. You can also visualize the relations between the various elements by means of include dependency graphs, inheritance diagrams, and collaboration diagrams, which are all generated automatically.

'''Project Home Page''': http://www.stack.nl/~dimitri/doxygen/

== Dependencies ==

=== Optional ===
* [[Qt3]]
* [[TeTeX]]
* [[Python]]
* [[Ghostscript]]
* [[Graphviz]]

== Note to DESTDIR Fans ==

Unfortunately, this package ignores DESTDIR. However, we ''can'' pervert to our purposes the variable that it uses for prefix. The installation commands thus become:

make INSTALL=/usr<DESTDIR>

and

make INSTALL=/usr<DESTDIR> \
DOCDIR=<DESTDIR>/usr/share/doc/doxygen \
install_docs

== Additional Configuration Options ==

''--english-only'': Include support for English only.

''--enable-langs list'': Include support for output languages listed in list. [default: nl,se,cz,fr,id,it,de,jp,je,es,fi,ru,hr,pl,pt,hu,kr,ke,ro,si,cn,no,br,dk,sk,ua,gr,tw,sr,ca,lt,za,ar,fa]

''--with-doxywizard'': If Qt is installed, you can use this flag to cause Doxygen's GUI front-end to be built.

== Non-Multilib ==

Compile the package:

rm src/unistd.h &&
./configure --prefix /usr --docdir /usr/share/doc &&
make

Install the package

make install

If you wish to generate and install the package documentation (note that man pages have already been installed), you must have Python, teTeX (for HTML docs) and Ghostscript (for PDF docs) installed, then issue the following command:

make install_docs

=== Command Explanations ===

''rm src/unistd.h'': Flex-2.5.33 has a bug that makes it so that it uses src/unistd.h instead of the version installed on your system. To avoid this, we remove src/unistd.h. Since this fixes a problem with the building of Doxygen's GUI front-end, you don't really need to do this if you're not building the GUI front-end (by using the flag --with-doxywizard), but it doesn't hurt.

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

rm src/unistd.h &&
./configure --prefix /usr --docdir /usr/share/doc &&
make CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}"

Install the package

make install

If you wish to generate and install the package documentation (note that man pages have already been installed), you must have Python, teTeX (for HTML docs) and Ghostscript (for PDF docs) installed, then issue the following command:

make install_docs

=== N32 ===

Compile the package:

rm src/unistd.h &&
./configure --prefix /usr --docdir /usr/share/doc &&
make CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}"

Install the package

make install

If you wish to generate and install the package documentation (note that man pages have already been installed), you must have Python, teTeX (for HTML docs) and Ghostscript (for PDF docs) installed, then issue the following command:

make install_docs

=== 64Bit ===

Compile the package:

rm src/unistd.h &&
./configure --prefix /usr --docdir /usr/share/doc &&
make CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}"

Install the package

make install

If you wish to generate and install the package documentation (note that man pages have already been installed), you must have Python, teTeX (for HTML docs) and Ghostscript (for PDF docs) installed, then issue the following command:

make install_docs

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| doxygen, doxytag, and optionally, doxywizard
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| /usr/share/doc/doxygen
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! doxygen
| is a command-line based utility used to generate template configuration files and then generate documentation from these templates. Use '''doxygen --help''' for an explanation of the command-line parameters.
|-valign="top"
! doxytag
| is used to generate a tag file and/or a search index for a set of HTML files.
|-valign="top"
! doxywizard
| is a GUI front-end for configuring and running '''doxygen'''.
|}

ARts

2007-02-05T07:18:08Z

Kalessin: I added a note about the test suite.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.kde.org/pub/kde/stable/{{KDE-Version}}/src/arts-{{aRts-Version}}.tar.bz2
|}
{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://svn.cross-lfs.org/svn/repos/patches/arts/arts-{{aRts-Version}}-fix_mmx-1.patch
|}

----

== Introduction to aRts ==

The Analog Realtime Synthesizer (aRts) enables the playing of multiple audio or video streams concurrently - be it on the desktop or over a network. ARts is a full-featured sound system and includes filters, a modular analog synthesizer, and a mixer. Its architecture allows developers to create additional filter plugins and users to apply sequences of filters using a graphical drag-n-drop approach. Video support is available for MPEG versions 1, 2 and 4 (experimental), as well as the AVI and DivX formats.

ARts is a core component of the KDE 3 desktop environment and provides the basis for the [[KdeMultimedia]] package. However, it can also be used independently of KDE (i.e. doesn't use Qt or [[KdeLibs]] for most things).

'''Old Project Home Page''': http://www.arts-project.org/

'''Current Project Home Page''': http://www.kde.org

== Dependencies ==

=== Required ===
* [[KDE Pre-Installation Configuration]]
* [[Qt3]]
* [[Glib2]]
=== Recommended ===
* [[libjpeg]]
=== Optional ===
* [[libvorbis]]
* [[ALSA]]
* [[Audio File]]
* [[libmad]]
* [[EsounD]]
* [[NAS]]
* [[MAS]]
* [[JACK]]

== Test Suite Note ==

While there ''is'' a test suite, it apparently does not work properly with GCC 4.x, so there's not really any point in running it.

== Non-Multilib ==

On x86_64, aRTS 'configure' fails to detect if the hardware provides SSE floating point to int conversion instructions. Apply the following patch to allow aRts to use SSE instructions and hardware float to int conversions on your x86_64 machine:

patch -Np1 -i ../arts-{{aRts-Version}}-fix_mmx-1.patch

Compile the package:

./configure --prefix=$KDE_PREFIX --disable-debug \
--disable-dependency-tracking &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=$KDE_PREFIX --disable-debug --disable-dependency-tracking \
--x-libraries=${XORG_PREFIX}/lib --with-qt-libraries=${QTDIR}/lib \
--enable-libsuffix=none &&
make

Install the package

make install &&
mv -v ${KDE_PREFIX}/bin/artsc-config{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=$KDE_PREFIX --libdir=${KDE_PREFIX}/lib32 --disable-debug \
--disable-dependency-tracking --x-libraries=${XORG_PREFIX}/lib32 --with-qt-libraries=${QTDIR}/lib32 \
--enable-libsuffix=32 &&
make

Install the package

make install &&
mv -v ${KDE_PREFIX}/bin/artsc-config{,-n32}

=== 64Bit ===

On x86_64, aRTS 'configure' fails to detect if the hardware provides SSE floating point to int conversion instructions. Apply the following patch to allow aRts to use SSE instructions and hardware float to int conversions on your x86_64 machine:

patch -Np1 -i ../arts-{{aRts-Version}}-fix_mmx-1.patch

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=$KDE_PREFIX --libdir=${KDE_PREFIX}/lib64 --disable-debug \
--disable-dependency-tracking --x-libraries=${XORG_PREFIX}/lib64 --with-qt-libraries=${QTDIR}/lib64 \
--enable-libsuffix=64 &&
make

Install the package

make install &&
mv -v ${KDE_PREFIX}/bin/artsc-config{,-64} &&
ln -sfv /usr/bin/multiarch_wrapper ${KDE_PREFIX}/bin/artsc-config

Qt3

2007-02-05T07:10:07Z

Kalessin: I added instructions for installing Qt3 in /usr.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://ftp.silug.org/mirrors/ftp.trolltech.com/qt/source/qt-x11-free-{{Qt3-Version}}.tar.bz2
|}

----

== Introduction to Qt3 ==

Qt is a comprehensive development framework that includes an extensive array of features, capabilities and tools that enable development of high-performance, cross-platform rich-client and server-side applications. Qt is the GUI framework on which [[KDE]] is built and Qt3 is the version of Qt that [[KDE]]3 uses. You can of course use Qt for non-[[KDE]] applications as well, but if you wish to use [[KDE]] or any [[KDE]]-based applications, you must have Qt installed on your system.

'''Project Home Page''': http://www.trolltech.com/products/qt/qt3

== Dependencies ==

=== Required ===
* [[X Window System]]
* [[libjpeg]]
* [[libmng]]
=== Optional ===
* [[MySQL]]
* [[NAS]]
* [[CUPS]]
* [[PostgreSQL]]
* [[unixODBC]]
* [[SQLite]]
* [[Firebird]]

== Extra ==

If you would like to compile with [[MySQL]] support add the following to the configure command:

-qt-sql-mysql

And run this sed before compiling:

sed -i "s@mysql.h@mysql/mysql.h@g" src/sql/drivers/mysql/qsql_mysql.h

If you would like to compile with [[NAS]] support add the following to the configure command:

-system-nas-sound

== Note to DESTDIR Fans ==

Unfortunately Qt3 ignores DESTDIR. However, it uses INSTALL_ROOT for the same purpose, so use INSTALL_ROOT as you would normally use DESTDIR.

= Installing Qt3 in /usr =

If you want to install Qt3 in /usr, these are in the instructions to do so. If you want to install it in /opt, the instructions are below.

== Non-Multilib ==

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Fix the location of some qt directories:

sed -i -e 's:$(QTDIR)/include:&/qt:' \
-e 's:$(QTDIR)/lib:&/qt:' \
mkspecs/linux*/qmake.conf

Compile the package:

<pre>
bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&

./configure -prefix /usr \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/share/qt \
-plugindir /usr/lib/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-noexceptions
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g" &&
make &&
exit
</pre>

Install the package:

<pre>
make install &&

cp -Rv doc/man /usr/share &&
cp -Rv examples /usr/share/doc/qt &&

ln -svf libqt-mt.so /usr/lib/libqt.so
</pre>

=== Command Explanations ===

''find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g"'': This command removes the harcoding of /usr/lib in a number of files.

== Multilib ==

=== 32Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Fix the location of some qt directories:

sed -i -e 's:$(QTDIR)/include:&/qt:' \
-e 's:$(QTDIR)/lib:&/qt:' \
mkspecs/linux*/qmake.conf

Compile the package:

<pre>
bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export QMAKESPEC=linux-g++-32 &&

./configure -prefix /usr \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/share/qt \
-plugindir /usr/lib/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-noexceptions
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib@@g" &&
make &&
exit
</pre>

Install the package:

<pre>
make install &&

mv -v /usr/bin/qmake{,-32} &&
mv -v /usr/bin/uic{,-32} &&
mv -v /usr/bin/moc{,-32} &&
mv -v /usr/bin/qtconfig{,-32} &&

ln -svf libqt-mt.so /usr/lib/libqt.so
</pre>

=== N32 ===

''TODO....''

=== 64Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Fix the location of some qt directories:

sed -i -e 's:$(QTDIR)/include:&/qt:' \
-e 's:$(QTDIR)/lib:&/qt:' \
mkspecs/linux*/qmake.conf

Fix a known issue with QTSPEC linux-g++-64:

sed -i "/^QMAKE_LIBDIR_QT/s:/lib:&64:" mkspecs/linux-g++-64/qmake.conf

Compile the package:

<pre>
bash
export PATH=$PWD/bin:$PATH &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export QMAKESPEC=linux-g++-64 &&

./configure -prefix /usr \
-libdir /usr/lib64 \
-docdir /usr/share/doc/qt \
-headerdir /usr/include/qt \
-datadir /usr/share/qt \
-plugindir /usr/lib64/qt/plugin \
-translationdir /usr/share/qt/translations \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-noexceptions
-thread \
-tablet &&

find -type f -name Makefile | xargs sed -i "s@-Wl,-rpath,/usr/lib64@@g" &&
make &&
exit
</pre>

Install the package:

<pre>
make install &&

cp -Rv doc/man /usr/share &&
cp -Rv examples /usr/share/doc/qt &&

mv -v /usr/bin/qmake{,-64} &&
mv -v /usr/bin/uic{,-64} &&
mv -v /usr/bin/moc{,-64} &&
mv -v /usr/bin/qtconfig{,-64} &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/qmake &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/uic &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/moc &&
ln -svf /usr/bin/multiarch_wrapper /usr/bin/qtconfig &&

ln -svf libqt-mt.so /usr/lib64/libqt.so
</pre>

== Configuring ==

=== profile.d/20-qt.sh ===

If you're using the setup defined in [[Bash Startup Files]] then run the following commands. If you're not using the setup defined in [[Bash Startup Files]] make sure that your enviornment is setup correctly.

==== Non-Multilib and Multilib ====

Note that this file isn't really necessary in most cases since /usr is already in the search path, but there are a few packages that care about QTDIR and some of the packages in CBLFS have instructions that include QTDIR, so creating this file means that those instructions should work correctly without any modification.

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/usr

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

=== ld.so.conf ===

There is no need to update ld.so.conf when installing Qt3 in /usr.

= Installing Qt3 in /opt =

== Non-Multilib ==

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&
./configure -prefix /opt/qt-{{Qt3-Version}} \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
ln -svfn qt-{{Qt3-Version}} /opt/qt &&
ln -sv libqt-mt.so /opt/qt/lib/libqt.so &&
cp -Rv doc/man /opt/qt/doc &&
cp -Rv examples /opt/qt/doc

== Multilib ==

=== 32Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&
export QMAKESPEC=linux-g++-32 &&
./configure -prefix /opt/qt-{{Qt3-Version}} \
-plugindir /opt/qt-{{Qt3-Version}}/lib/plugin \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qmake{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/uic{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/moc{,-32} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qtconfig{,-32} &&
ln -sv libqt-mt.so /opt/qt-{{Qt3-Version}}/lib/libqt.so

=== N32 ===

''TODO....''

=== 64Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Fix a known issue with QTSPEC linux-g++-64:

sed -i "/^QMAKE_LIBDIR_QT/s:/lib:&64:" mkspecs/linux-g++-64/qmake.conf

Compile the package

bash
export QTDIR=$PWD &&
export LD_LIBRARY_PATH=$PWD/lib:$LD_LIBRARY_PATH &&
export PATH=$PWD/bin:$PATH &&
export QMAKESPEC=linux-g++-64 &&
./configure -prefix /opt/qt-{{Qt3-Version}} \
-libdir /opt/qt-{{Qt3-Version}}/lib64 \
-plugindir /opt/qt-{{Qt3-Version}}/lib64/plugin \
-L/usr/lib64 \
-sysconfdir /etc/qt \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-plugin-imgfmt-png \
-plugin-imgfmt-jpeg \
-plugin-imgfmt-mng \
-no-exceptions \
-thread \
-tablet &&
make &&
exit

Install the package

make install &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qmake{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/uic{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/moc{,-64} &&
mv -v /opt/qt-{{Qt3-Version}}/bin/qtconfig{,-64} &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/qmake &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/uic &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/moc &&
ln -svf /usr/bin/multiarch_wrapper /opt/qt-{{Qt3-Version}}/bin/qtconfig &&
ln -sv libqt-mt.so /opt/qt-{{Qt3-Version}}/lib64/libqt.so &&
cp -Rv doc/man /opt/qt-{{Qt3-Version}}/doc &&
cp -Rv examples /opt/qt-{{Qt3-Version}}/doc &&
ln -svfn qt-{{Qt3-Version}} /opt/qt

== Configuring ==

=== profile.d/20-qt.sh ===

If you're using the setup defined in [[Bash Startup Files]] then run the following commands. If you're not using the setup defined in [[Bash Startup Files]] make sure that your enviornment is setup correctly.

==== Non-Multilib ====

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/opt/qt

export PATH="${PATH}:${QTDIR}/bin"

export PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH+:}${QTDIR}/lib/pkgconfig"

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

==== Multilib ====

cat > /etc/profile.d/20-qt.sh << "EOF"
# Begin /etc/profile.d/20-qt.sh

export QTDIR=/opt/qt

export PATH="${PATH}:${QTDIR}/bin"

export PKG_CONFIG_PATH32="${PKG_CONFIG_PATH32}${PKG_CONFIG_PATH32+:}${QTDIR}/lib/pkgconfig"
export PKG_CONFIG_PATHN32="${PKG_CONFIG_PATHN32}${PKG_CONFIG_PATHN32+:}${QTDIR}/lib32/pkgconfig"
export PKG_CONFIG_PATH64="${PKG_CONFIG_PATH64}${PKG_CONFIG_PATH64+:}${QTDIR}/lib64/pkgconfig"

# End /etc/profile.d/20-qt.sh
EOF
source /etc/profile

=== ld.so.conf ===

==== Non-Multilib ====

cat >> /etc/ld.so.conf << "EOF" &&
# Begin qt addition to /etc/ld.so.conf

/opt/qt/lib

# End qt addition
EOF
ldconfig

==== Multilib ====

cat >> /etc/ld.so.conf << "EOF" &&
# Begin qt addition to /etc/ld.so.conf

/opt/qt/lib
/opt/qt/lib32
/opt/qt/lib64

# End qt addition
EOF
ldconfig

Qt4

2007-02-05T06:04:14Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.trolltech.com/qt/source/qt-x11-opensource-src-{{Qt4-Version}}.tar.gz
|}

----

== Introduction to Qt4 ==

Qt is a comprehensive development framework that includes an extensive array of features, capabilities and tools that enable development of high-performance, cross-platform rich-client and server-side applications. Qt is the GUI framework on which [[KDE]] is built and Qt4 is the version of Qt that the upcoming [[KDE]]4 will use. You can of course use Qt for non-[[KDE]] applications as well, but if you wish to use [[KDE]] or any [[KDE]]-based applications, you must have Qt installed on your system.

'''Project Home Page''': http://www.trolltech.com/products/qt

== Dependencies ==

=== Required ===
* [[X Window System]]
* [[libjpeg]]
* [[libmng]]

=== Optional ===
* Xinerama provided by and [[X Window System]]
* Xfixes provided by and [[X Window System]]
* [[Glib2]]
* [[MySQL]]
* [[NAS]]
* [[CUPS]]
* [[PostgreSQL]]
* [[unixODBC]]
* [[SQLite]]
* [[Firebird]]

== Configuration Information ==

If you would like to compile with [[MySQL]] support add the following to the configure command:

-plugin-sql-mysql -I/usr/include/mysql

If you would like to compile with [[PostgreSQL]] support add the following to the configure command:

-plugin-sql-psql -I/usr/include/postgresql/server

If you would like to compile with [[SQLite]] support add the following to the configure command:

-plugin-sql-sqlite2 -system-sqlite

If you would like to compile with [[unixODBC]] support add the following to the configure command:

-plugin-sql-odbc

If you would like to compile with [[NAS]] support add the following to the configure command:

-system-nas-sound

If your [[X Window System]] is '''NOT''' Xorg, then add to configure:

-no-xfixes

== Non-Multilib ==

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package:

./configure -prefix /opt/qt-{{Qt4-Version}} \
-sysconfdir /etc/qt4 \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-no-exceptions \
-tablet &&
make

Install the package

make install &&
ln -v -sfn qt-{{Qt4-Version}} /opt/qt4

== Multilib ==

=== 32Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package

export QMAKESPEC=linux-g++-32 &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure -prefix /opt/qt-{{Qt4-Version}} \
-sysconfdir /etc/qt4 \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-no-exceptions \
-tablet &&
make

Install the package

make install &&
mv -v /opt/qt-{{Qt4-Version}}/bin/qmake{,-32} &&
mv -v /opt/qt-{{Qt4-Version}}/bin/uic{,-32} &&
mv -v /opt/qt-{{Qt4-Version}}/bin/uic3{,-32} &&
mv -v /opt/qt-{{Qt4-Version}}/bin/moc{,-32} &&
mv -v /opt/qt-{{Qt4-Version}}/bin/qtconfig{,-32}

=== N32 ===

TO BE DONE

=== 64Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package

export QMAKESPEC=linux-g++-64 &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure -prefix /opt/qt-{{Qt4-Version}} \
-libdir /opt/qt-{{Qt4-Version}}/lib64 \
-plugindir /opt/qt-{{Qt4-Version}}/lib64/plugin \
-L/usr/lib64 \
-sysconfdir /etc/qt4 \
-qt-gif \
-system-zlib \
-system-libpng \
-system-libjpeg \
-system-libmng \
-no-exceptions \
-tablet &&
make

Install the package

make install &&
mv -v /opt/qt-{{Qt4-Version}}/bin/qmake{,-64} &&
mv -v /opt/qt-{{Qt4-Version}}/bin/uic{,-64} &&
mv -v /opt/qt-{{Qt4-Version}}/bin/uic3{,-64} &&
mv -v /opt/qt-{{Qt4-Version}}/bin/moc{,-64} &&
mv -v /opt/qt-{{Qt4-Version}}/bin/qtconfig{,-64} &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-{{Qt4-Version}}/bin/qmake &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-{{Qt4-Version}}/bin/uic &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-{{Qt4-Version}}/bin/uic3 &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-{{Qt4-Version}}/bin/moc &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt-{{Qt4-Version}}/bin/qtconfig &&
ln -v -sfn qt-{{Qt4-Version}} /opt/qt4

== Configuring ==

=== Non-Multilib ===

==== /etc/profile.d/20-qt4.sh ====

Create an addition to the [[Bash Startup Files]]:

cat > /etc/profile.d/20-qt4.sh << "EOF"
# Begin /etc/profile.d/20-qt4.sh

export PATH="${PATH}:/opt/qt4/bin"

export PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH+:}/opt/qt4/lib"

# End /etc/profile.d/20-qt4.sh
EOF

==== ld.so.conf ====

cat >> /etc/ld.so.conf << "EOF" &&
# Begin qt4 addition to /etc/ld.so.conf

/opt/qt4/lib

# End qt4 addition
EOF
ldconfig

=== Multilib ===

==== /etc/profile.d/20-qt4.sh ====

Create an addition to the [[Bash Startup Files]]:

cat > /etc/profile.d/20-qt4.sh << "EOF"
# Begin /etc/profile.d/20-qt4.sh

export PATH="${PATH}:/opt/qt4/bin"

export PKG_CONFIG_PATH32="${PKG_CONFIG_PATH32}${PKG_CONFIG_PATH32+:}/opt/qt4/lib"
export PKG_CONFIG_PATHN32="${PKG_CONFIG_PATHN32}${PKG_CONFIG_PATHN32+:}/opt/qt4/lib32"
export PKG_CONFIG_PATH64="${PKG_CONFIG_PATH64}${PKG_CONFIG_PATH64+:}/opt/qt4/lib64"

# End /etc/profile.d/20-qt4.sh
EOF

==== ld.so.conf ====

cat >> /etc/ld.so.conf << "EOF" &&
# Begin qt4 addition to /etc/ld.so.conf

/opt/qt4/lib
/opt/qt4/lib32
/opt/qt4/lib64

# End qt4 addition
EOF
ldconfig

Qt3

2007-02-05T06:02:01Z

Kalessin: I updated the package description.

ARts

2007-02-01T21:12:13Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.kde.org/pub/kde/stable/{{KDE-Version}}/src/arts-{{aRts-Version}}.tar.bz2
|}

----

== Introduction to aRts ==

The Analog Realtime Synthesizer (aRts) enables the playing of multiple audio or video streams concurrently - be it on the desktop or over a network. ARts is a full-featured sound system and includes filters, a modular analog synthesizer, and a mixer. Its architecture allows developers to create additional filter plugins and users to apply sequences of filters using a graphical drag-n-drop approach. Video support is available for MPEG versions 1, 2 and 4 (experimental), as well as the AVI and DivX formats.

ARts is a core component of the KDE 3 desktop environment and provides the basis for the [[KdeMultimedia]] package. However, it can also be used independently of KDE (i.e. doesn't use Qt or [[KdeLibs]] for most things).

'''Old Project Home Page''': http://www.arts-project.org/

'''Current Project Home Page''': http://www.kde.org

== Dependencies ==

=== Required ===
* [[Qt3]]
* [[Glib2]]
=== Recommended ===
* [[libjpeg]]
=== Optional ===
* [[libvorbis]]
* [[ALSA]]
* [[Audio File]]
* [[libmad]]
* [[EsounD]]
* [[NAS]]
* [[MAS]]
* [[JACK]]

== Non-Multilib ==

Compile the package:

./configure --prefix=$KDE_PREFIX --disable-debug \
--disable-dependency-tracking &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=$KDE_PREFIX --disable-debug --disable-dependency-tracking \
--x-libraries=${XORG_PREFIX}/lib --with-qt-libraries=${QTDIR}/lib \
--enable-libsuffix=none &&
make

Install the package

make install &&
mv -v ${KDE_PREFIX}/bin/artsc-config{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=$KDE_PREFIX --libdir=${KDE_PREFIX}/lib32 --disable-debug \
--disable-dependency-tracking --x-libraries=${XORG_PREFIX}/lib32 --with-qt-libraries=${QTDIR}/lib32 \
--enable-libsuffix=32 &&
make

Install the package

make install &&
mv -v ${KDE_PREFIX}/bin/artsc-config{,-n32}

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=$KDE_PREFIX --libdir=${KDE_PREFIX}/lib64 --disable-debug \
--disable-dependency-tracking --x-libraries=${XORG_PREFIX}/lib64 --with-qt-libraries=${QTDIR}/lib64 \
--enable-libsuffix=64 &&
make

Install the package

make install &&
mv -v ${KDE_PREFIX}/bin/artsc-config{,-64} &&
ln -sfv /usr/bin/multiarch_wrapper ${KDE_PREFIX}/bin/artsc-config

KdeMultimedia

2007-02-01T17:21:57Z

Kalessin: I updated the dependencies based on the list from kde.org.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.kde.org/pub/kde/stable/{{KDE-Version}}/src/kdemultimedia-{{KDE-Version}}.tar.bz2
|-valign="top"
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/kdemultimedia/kdemultimedia-{{KDE-Version}}-libtunepimp_0.5.x-1.patch
|}

----

== Dependencies ==

=== Required ===
* [[KdeBase]]
=== Recommended ===
* [[libjpeg]]
* [[LibXML2]]
* [[ALSA]]
* [[Audio File]] ([[Audio File]] is needed to play or save .WAV audio files)
* [[Libmad]] (Not required to play MP3s, but the KDE folks recommend it for its superior playback quality)
* [[Xine Libraries]] (The KDE multimedia system uses XINE for basic video support)
* [[Ghostscript]] (Almost all of KDE benefits from Ghostscript due to the rendering and filtering it provides)
=== Optional ===
* [[Akode]]
* [[CDParanoia-III]]
* [[cdrtools]]
* [[LAME]]
* [[libvorbis]]
* [[Speex]]
* [[FLAC]] (with [[libogg]] support)
* [[GStreamer]]
* [[Theora]]
* [[TagLib]]
* [[SDL]] (Required by some Noatun Plugins)
* [[TunePimp]] (JuK can use [[LibMusicBrainz]] in conjuction with [[TunePimp]] to guess the tags for music in your library)
* [[LibMusicBrainz]] (JuK can use [[LibMusicBrainz]] in conjuction with [[TunePimp]] to guess the tags for music in your library)

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../kdemultimedia-{{KDE-Version}}-libtunepimp_0.5.x-1.patch &&
./configure --prefix=$KDE_PREFIX --sysconfdir=/etc/kde \
--disable-debug --disable-dependency-tracking &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

export USE_ARCH=32 &&
patch -Np1 -i ../kdemultimedia-{{KDE-Version}}-libtunepimp_0.5.x-1.patch &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=$KDE_PREFIX --sysconfdir=/etc/kde --disable-debug \
--disable-dependency-tracking --x-libraries=${XORG_PREFIX}/lib \
--with-qt-libraries=${QTDIR}/lib --enable-libsuffix=none &&
make

Install the package

make install &&
unset USE_ARCH

=== N32 ===

Compile the package:

export USE_ARCH=n32 &&
patch -Np1 -i ../kdemultimedia-{{KDE-Version}}-libtunepimp_0.5.x-1.patch &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=$KDE_PREFIX --sysconfdir=/etc/kde --libdir=${KDE_PREFIX}/lib32
--disable-debug --disable-dependency-tracking --x-libraries=${XORG_PREFIX}/lib32 \
--with-qt-libraries=${QTDIR}/lib32 --enable-libsuffix=32 &&
make

Install the package

make install &&
unset USE_ARCH

=== 64Bit ===

Compile the package:

export USE_ARCH=64 &&
patch -Np1 -i ../kdemultimedia-{{KDE-Version}}-libtunepimp_0.5.x-1.patch &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=$KDE_PREFIX --sysconfdir=/etc/kde --libdir=${KDE_PREFIX}/lib64 \
--disable-debug --disable-dependency-tracking --x-libraries=${XORG_PREFIX}/lib64 \
--with-qt-libraries=${QTDIR}/lib64 --enable-libsuffix=64 &&
make

Install the package

make install &&
unset USE_ARCH

Audio File

2007-02-01T17:03:33Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.68k.org/~michael/audiofile/audiofile-{{Audio File-Version}}.tar.gz
|}

----

== Introduction to Audio File ==

The Audio File Library provides a uniform and elegant API for accessing a variety of audio file formats, such as AIFF/AIFF-C, WAVE, NeXT/Sun .snd/.au, Berkeley/IRCAM/CARL Sound File, Audio Visual Research, Amiga IFF/8SVX, and NIST SPHERE. Supported compression formats are currently G.711 mu-law and A-law and IMA and MS ADPCM.

Key goals of the Audio File Library are file format transparency and data format transparency. The same calls for opening a file, accessing and manipulating audio metadata (e.g. sample rate, sample format, textual information, MIDI parameters), and reading/writing sample data will work with any supported audio file format. Likewise, the format of the audio data presented to the application need not be tied to the format of the data contained in the file.

'''Project Home Page''': http://www.68k.org/~michael/audiofile/

== Dependencies ==

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install &&
mv -v /usr/bin/audiofile-config{,-32}

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install &&
mv -v /usr/bin/audiofile-config{,-n32}

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
mv -v /usr/bin/audiofile-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/audiofile-config

== Contents ==

* Installed Programs: sfconvert, sfinfo, audiofile-config
* Installed Libraries: libaudiofile.{so,la,a}

ALSA Utilities

2007-02-01T12:37:45Z

Kalessin: I updated the contents.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-{{ALSA Utilities-Version}}.tar.bz2
|}

----

== Introduction to ALSA Utilities ==

The ALSA Utilities package contains the command line utilities for the ALSA project.
This package can be compiled only with the installed ALSA driver and the ALSA C library.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

* Note for users with multiple soundcards
[http://alsa.opensrc.org/MultipleCards Alsa tutorial for multiple soundcards]

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directory:
| /usr/share/alsa/speaker-test, /ut/share/sounds/alsa
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! alsactl
| is a utility for soundcard settings management.
|-valign="top"
! alsaconf
| is the ALSA driver configurator script.
|-valign="top"
! aplay/arecord
| is a utility for the playback/capture of .wav,.voc,.au files.
|-valign="top"
! amixer
| is a command line mixer.
|-valign="top"
! alsamixer
| is an ncurses mixer.
|-valign="top"
! amidi
| is a utility to send/receive sysex dumps or other MIDI data.
|-valign="top"
! iecset
| is a utility to show/set the IEC958 status bits.
|-valign="top"
! aconnect
| ???
|-valign="top"
! aplaymidi
| ???
|-valign="top"
! arecordmidi
| ???
|-valign="top"
! aseqdump
| ???
|-valign="top"
! aseqnet
| ???
|-valign="top"
! speaker-test
| ???
|}

ALSA Tools

2007-02-01T11:13:17Z

Kalessin: I rearranged some text so that it's easier to read.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/tools/alsa-tools-{{ALSA Tools-Version}}.tar.bz2
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/alsa-tools/alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch
|}

== Introduction to ALSA Tools ==

The ALSA Tools package contains various advanced tools for use with certain sound cards.

This package is only needed if you have advanced requirements for your sound card. A list of the various tools can be found at http://alsa.opensrc.org/Alsa-tools.

'''Note:''' You don't compile the tools all at once, but
instead build them individually. For each tool that
you wish to build, you go into its directory and run
the build commands from there.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[ALSA Library]]
=== Optional ===
* [[Gtk1]] (To Build echomixer, envy24control, and rmedigicontrol)
* [[FLTK]] (To Build hdspconf and hdspmixer)
* [[Qt3]] (To Build qlo10k1)

'''ld10k1''' must be built before '''qt10k1'''

== Non-Multilib ==

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Compile each package with:

./configure --prefix=/usr &&
make

Install each package with:

make install

== Multilib ==

=== 32Bit ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Compile each package with:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install each package with:

make install

=== N32 ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Before building qlo10k1 apply the following sed so it looks in the correct dir for libraries:

sed -i "s@QTDIR/lib@&32@g" configure

Compile each package with:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install each package with:

make install

=== 64Bit ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Before building qlo10k1 apply the following sed so it looks in the correct dir for libraries:

sed -i "s@QTDIR/lib@&64@g" configure

Compile each package with:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install each package with:

make install

ALSA Utilities

2007-02-01T11:10:03Z

Kalessin: I updated the package description and the contents.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-{{ALSA Utilities-Version}}.tar.bz2
|}

----

== Introduction to ALSA Utilities ==

The ALSA Utilities package contains the command line utilities for the ALSA project.
This package can be compiled only with the installed ALSA driver and the ALSA C library.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

* Note for users with multiple soundcards
[http://alsa.opensrc.org/MultipleCards Alsa tutorial for multiple soundcards]

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
|-valign="top"
! Installed Libraries:
| ???
|-valign="top"
! Installed Directory:
| /usr/share/alsa/speaker-test, /ut/share/sounds/alsa
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! alsactl
| is a utility for soundcard settings management.
|-valign="top"
! alsaconf
| is the ALSA driver configurator script.
|-valign="top"
! aplay/arecord
| is a utility for the playback/capture of .wav,.voc,.au files.
|-valign="top"
! amixer
| is a command line mixer.
|-valign="top"
! alsamixer
| is an ncurses mixer.
|-valign="top"
! amidi
| is a utility to send/receive sysex dumps or other MIDI data.
|-valign="top"
! iecset
| is a utility to show/set the IEC958 status bits.
|-valign="top"
! aconnect
| ???
|-valign="top"
! aplaymidi
| ???
|-valign="top"
! arecordmidi
| ???
|-valign="top"
! aseqdump
| ???
|-valign="top"
! aseqnet
| ???
|-valign="top"
! speaker-test
| ???
|}

ALSA Plugins

2007-02-01T10:55:42Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/plugins/alsa-plugins-{{ALSA Plugins-Version}}.tar.bz2
|}

----

== Introduction to ALSA Pugins ==

The ALSA Plugins package contains various plugins for ALSA (see http://alsa.opensrc.org/ALSA_plugins for the list). ALSA plugins are used to create virtual devices that can be used like normal hardware devices but cause extra processing of the sound stream to take place. They are used while configuring ALSA in the .asoundrc file.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[pkg-config]]
* [[ALSA Library]]
=== Optional ===
* [[FFmpeg]]
* [[JACK]]
* [[PulseAudio]]
* [[Secret Rabbit Code]] (libsamplerate)

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/alsa-plugins-{{ALSA Plugins-Version}} &&
install -v -m644 doc/{README*,*.txt} \
/usr/share/doc/alsa-plugins-{{ALSA Plugins-Version}}

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" ./configure --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" ./configure --libdir=/usr/lib64 &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/alsa-plugins-{{ALSA Plugins-Version}} &&
install -v -m644 doc/{README*,*.txt} \
/usr/share/doc/alsa-plugins-{{ALSA Plugins-Version}}

== Contents ==

* Installed Libraries: libasound_module_ctl_oss.{so,la}, libasound_module_pcm_oss.{so,la}, libasound_module_pcm_upmix.{so,la}, libasound_module_pcm_vdownmix.{so,la}
* Installed Directories: /usr/lib/alsa-lib

ALSA Firmware

2007-02-01T10:48:37Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.alsa-project.org/pub/firmware/alsa-firmware-{{ALSA Firmware-Version}}.tar.bz2
|}

----

== Introduction to ALSA Firmware ==

The ALSA Firmware package contains the firmware binaries for each loader program included in [[ALSA Tools]]. The firmware data can be used by each ALSA firmware loader program like vxloader, or passed through the hotplug firmware-loading mechanism. You only need this package for certain soundcards. See the README for configuration options.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install

ALSA Tools

2007-02-01T10:47:02Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/tools/alsa-tools-{{ALSA Tools-Version}}.tar.bz2
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/alsa-tools/alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch
|}

== Introduction to ALSA Tools ==

The ALSA Tools package contains various advanced tools for use with certain sound cards.

This package is only needed if you have advanced requirements for your sound card. Also, you don't compile the tools all at once, but instead build them individually. For each tool that you wish to build, you go into its directory and run the build commands there. A list of the various tools can be found at http://alsa.opensrc.org/Alsa-tools.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[ALSA Library]]
=== Optional ===
* [[Gtk1]] (To Build echomixer, envy24control, and rmedigicontrol)
* [[FLTK]] (To Build hdspconf and hdspmixer)
* [[Qt3]] (To Build qlo10k1)

'''ld10k1''' must be built before '''qt10k1'''

== Non-Multilib ==

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Compile each package with:

./configure --prefix=/usr &&
make

Install each package with:

make install

== Multilib ==

=== 32Bit ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Compile each package with:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install each package with:

make install

=== N32 ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Before building qlo10k1 apply the following sed so it looks in the correct dir for libraries:

sed -i "s@QTDIR/lib@&32@g" configure

Compile each package with:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install each package with:

make install

=== 64Bit ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Before building qlo10k1 apply the following sed so it looks in the correct dir for libraries:

sed -i "s@QTDIR/lib@&64@g" configure

Compile each package with:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install each package with:

make install

ALSA

2007-02-01T09:37:31Z

Kalessin: I updated the package description.

== Introduction to ALSA ==

The Advanced Linux Sound Architecture (ALSA) provides audio and MIDI functionality to the Linux operating system. The Linux kernel has ALSA support by default, but you need the [[ALSA Library]] in order to interface with those kernel modules. Some of the other packages provided by the ALSA developers may be of use to you as well. They are listed below.

You will probably need the [[ALSA Library]], [[ALSA Utilities]], and [[ALSA OSS]] packages at minimum. Further information about ALSA and its various packages can be found in the [http://alsa.opensrc.org/Main_Page ALSA Wiki].

'''Project Home Page''': http://www.alsa-project.org/

== Note on nVidia nForce 430 ==

If you have nVidia HDA audio chips MCP51, MCP55, MCP65, or MCP67, nVidia recommends the hda-intel module for these chips. The ALSA driver code did not include support for these chips until 1.0.14rc1. ALSA-driver-1.0.14rc1 wasn't included in the kernel until the 2.6.20 series. If you don't want to use a prepatch version of the kernel and can't wait for sound, the following patch can be applied to the linux-2.6.19 source so the snd-hda-intel module will support these nVidia chips.

{|
|-
! Download Patch:
| http://svn.cross-lfs.org/svn/repos/patches/linux-2.6.19/linux-2.6.19-HDAudio-nVidia-1.patch
|}

== Components of ALSA ==

*[[ALSA Library]]
*[[ALSA Plugins]]
*[[ALSA Utilities]]
*[[ALSA Tools]]
*[[ALSA Firmware]]
*[[ALSA OSS]]
----

*[[Main Page]]

ALSA Tools

2007-02-01T08:07:05Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/tools/alsa-tools-{{ALSA Tools-Version}}.tar.bz2
|-
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/alsa-tools/alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch
|}

== Introduction to ALSA Tools ==

The ALSA Tools package contains various advanced tools for use with certain sound cards.

This package is only needed if you have advanced requirements for your sound card. Also, you don't compile the tools all at once, but instead build them individually. For each tool that you wish to build, you go into its directory and run the build commands there.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[ALSA Library]]
=== Optional ===
* [[Gtk1]] (To Build echomixer, envy24control, and rmedigicontrol)
* [[FLTK]] (To Build hdspconf and hdspmixer)
* [[Qt3]] (To Build qlo10k1)

'''ld10k1''' must be built before '''qt10k1'''

== Non-Multilib ==

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Compile each package with:

./configure --prefix=/usr &&
make

Install each package with:

make install

== Multilib ==

=== 32Bit ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Compile each package with:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" USE_ARCH=32 PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure --prefix=/usr &&
make

Install each package with:

make install

=== N32 ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Before building qlo10k1 apply the following sed so it looks in the correct dir for libraries:

sed -i "s@QTDIR/lib@&32@g" configure

Compile each package with:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" USE_ARCH=n32 PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install each package with:

make install

=== 64Bit ===

Apply the following patch in the top-level directory of alsa-tools before building ac3dec:

patch -Np1 -i ../alsa-tools-{{ALSA Tools-Version}}-ac3dec_config_update-1.patch

Before building qlo10k1 apply the following sed so it looks in the correct dir for libraries:

sed -i "s@QTDIR/lib@&64@g" configure

Compile each package with:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" USE_ARCH=64 PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install each package with:

make install

ALSA OSS

2007-02-01T07:27:46Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.alsa-project.org/pub/oss-lib/alsa-oss-{{ALSA OSS-Version}}.tar.bz2
|}

----

== Introduction to ALSA OSS ==

ALSA OSS is a package that makes is possible for programs that use OSS to use ALSA. It uses a different means of providing OSS emulation (the other being the kernel level OSS emu). It is done via a userspace lib that tweaks the open(), write(), etc.., system calls to do the right thing.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --libdir=/usr/lib64 &&
make

Install the package

make install

== Contents ==

* Installed Programs: aoss
* Installed Libraries: libalsatoss.{so,la,a}, libaoss.{so,la,a}, libossredir.{ls,a}

ALSA Utilities

2007-02-01T06:46:16Z

Kalessin:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.alsa-project.org/pub/utils/alsa-utils-{{ALSA Utilities-Version}}.tar.bz2
|}

----

== Introduction to ALSA Utilities ==

The ALSA Utilities package contains a number of utilities which control your sound card.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Required ===
* [[ALSA Library]]

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure &&
make

Install the package

make install

== Configuration Information ==

Use a bootscript to store the values at shutdown.

As the root user, install the init script /etc/rc.d/init.d/alsa included in the [[blfs-bootscripts]] package.

make install-alsa

Note that all channels of your sound card are muted by default. You can use the alsamixer program from the ALSA Utilities to change this.

The first time the alsactl program is run from the udev rule below, it will complain that there is no state in /etc/asound.state. You can prevent this by running the following commands as the root user:

touch /etc/asound.state &&
alsactl store

As the root user, install a new Udev rules file to create the audio device nodes and run the restore script:

cat > /etc/udev/rules.d/15-alsa.rules << "EOF"
# Give the audio group ownership of sound devices
SUBSYSTEM=="sound", GROUP="audio"
SUBSYSTEM=="snd", GROUP="audio"

# ALSA Devices
# When a sound device is detected, restore the volume settings
KERNEL=="controlC[0-9]*", NAME="snd/%k", ACTION=="add", RUN+="/usr/sbin/alsactl restore %n"
KERNEL=="hw[CD0-9]*", NAME="snd/%k"
KERNEL=="pcm[CD0-9cp]*", NAME="snd/%k"
KERNEL=="midiC[D0-9]*", NAME="snd/%k"
KERNEL=="timer", NAME="snd/%k"
KERNEL=="seq", NAME="snd/%k"
EOF
chmod 644 /etc/udev/rules.d/15-alsa.rules

* Note for users with multiple soundcards
[http://alsa.opensrc.org/MultipleCards Alsa tutorial for multiple soundcards]

== Contents ==

* Installed Programs: alsactl, alsaconf, alsamixer, amidi, amixer, aplay, iecset, aconnect, aplaymidi, arecordmidi, aseqdump, aseqnet, speaker-test
* Installed Directories: /usr/share/alsa/speaker-test, /usr/share/sounds/alsa

ALSA Library

2007-02-01T05:58:33Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| ftp://ftp.alsa-project.org/pub/lib/alsa-lib-{{ALSA Library-Version}}.tar.bz2
|}

----

== Introduction to ALSA Library ==

The ALSA Library is a userspace library that provides a level of abstraction over the /dev interfaces provided by the kernel modules.

'''Project Home Page''': http://www.alsa-project.org/

== Dependencies ==

=== Optional ===
* [[Doxygen]]
* [[resmgr]]

== Configuration Information ==

If you would like to build ALSA Library against [[resmgr]] then add the following to configure:

--enable-resmgr

== Non-Multilib ==

Compile the package:

./configure &&
make

Install the package

make install &&
install -v -m644 -D doc/asoundrc.txt \
/usr/share/doc/alsa-lib-{{ALSA Library-Version}}/asoundrc.txt

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --libdir=/usr/lib64 &&
make

Install the package

make install &&
install -v -m644 -D doc/asoundrc.txt \
/usr/share/doc/alsa-lib-{{ALSA Library-Version}}/asoundrc.txt

== Documentation ==

If you have [[Doxygen]] installed and you wish to build the library API documentation, run the following commands:

make doc &&
install -v -d -m755 /usr/share/alsa/doc/html &&
install -v -m644 doc/doxygen/html/* /usr/share/alsa/doc/html

== Contents ==

* Installed Programs: aserver
* Installed Libraries: libasound.{so,la,a}, smixer-sbase.{so,la,a}, smixer-ac97.{so,la,a}, smixer-hda.{so,la,a}
* Installed Directories: /usr/include/alsa/sound, /usr/include/sys, /usr/share/alsa/cards, /usr/share/alsa/pcm, /usr/lib/alsa-lib/smixer

Yasm

2007-02-01T04:54:43Z

Kalessin: I updated the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.tortall.net/projects/yasm/releases/yasm-{{Yasm-Version}}.tar.gz
|}

----

== Introduction to Yasm ==

Yasm is a complete rewrite of the [[NASM]] assembler under the new BSD license. It currently supports the x86 and AMD64 instruction sets, accepts [[NASM]] and GAS assembler syntaxes, outputs binary, ELF32, ELF64, COFF, Win32, and Win64 object formats, and generates source debugging information in STABS, DWARF 2, and CodeView 8 formats.

'''Project Home Page''': http://www.tortall.net/projects/yasm/

== Dependencies ==

=== Optional ===
* [[xmlto]]

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| ???
|-valign="top"
! Installed Libraries:
| ???
|-valign="top"
! Installed Directories:
| ???
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! program1
| ???
|-valign="top"
! program2
| ???
|-valign="top"
! library1.{a,la,so}
| ???
|}

NASM

2007-02-01T04:23:37Z

Kalessin: I filled in the package description.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://prdownloads.sourceforge.net/nasm/nasm-{{NASM-Version}}.tar.bz2
|-valign="top"
!Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/nasm/nasm-{{NASM-Version}}-security_fix-1.patch
|}

----

== Introduction to NASM ==

NASM is prototype general-purpose x86 assembler. It supports a number of different binary formats including flat-form binary files, a.out, ELF, COFF, Microsoft 16-bit OBJ and Win32, OS/2 object files, the as86 object format, and a home-grown format called RDF. Its syntax is designed to be simple and easy to understand, similar to Intel's but less complex. It supports Pentium, P6, MMX, 3DNow! and SSE opcodes, and has macro capability.

Also included is NDISASM, a prototype x86 binary-file disassembler which uses the same instruction table as NASM.

'''Project Home Page''': http://sourceforge.net/projects/nasm/

== Dependencies ==

=== Optional (For Building Documentation) ===
* [[TeTeX]]
* [[Ghostscript]]

== Non-Multilib ==

Compile the package:

patch -Np1 -i ../nasm-{{NASM-Version}}-security_fix-1.patch &&
./configure --prefix=/usr &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

patch -Np1 -i ../nasm-{{NASM-Version}}-security_fix-1.patch &&
CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===

Compile the package:

patch -Np1 -i ../nasm-{{NASM-Version}}-security_fix-1.patch &&
CC="gcc ${BUILDN32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== 64Bit ===

Compile the package:

patch -Np1 -i ../nasm-{{NASM-Version}}-security_fix-1.patch &&
CC="gcc ${BUILD64}" ./configure --prefix=/usr &&
make

Install the package

make install

== Documentation ==

FLAC

2007-02-01T03:30:12Z

Kalessin: I added additional configuration options.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://prdownloads.sourceforge.net/flac/flac-{{FLAC-Version}}.tar.gz
|}

----

== Introduction to FLAC ==

FLAC stands for Free Lossless Audio Codec. It's an audio format similar to Ogg Vorbis ([[libvorbis]]) and MP3 ([[LAME]]), but lossless, meaning that audio is compressed in FLAC without any loss in quality.

Naturally, because FLAC is lossless it does not compress as well as Vorbis or MP3 (which are lossy), but unlike Vorbis and MP3, FLAC-encoded files can be safely converted into other audio codecs (including Vorbis and MP3) - precisely because no data was lost when the file was converted into FLAC in the first place. As such, even if you don't have the disk space to have your audio files in FLAC for normal use, FLAC works quite well for archiving them. That way you can convert them into whatever audio codec you may need in the future. Of course, if you ''do'' have the disk space, FLAC works as well as - or even better than - Vorbis and MP3 when it comes to audio playback.

'''Project Home Page''': http://flac.sourceforge.net/

== Dependencies ==
=== Optional ===
* [[libogg]]
* [[XMMS]]
* [[NASM]]
* [[DocBook Utils]]
* [[Doxygen]]
* [[Valgrind]]

== Additional Configuration Options ==

==== Test Suite Related Flags ====

''--enable-exhaustive-tests'': Enable exhaustive tesing (VERY long).

''--enable-valgrind-testing'': Run all tests inside [[Valgrind]].

''--disable-thorough-tests'': Disable thorough (long) testing, do only basic tests.

''--disable-oggtest'': Do not try to compile and run a test Ogg ([[libogg]]) program.

==== CPU Instruction Related Flags ====

The following flags have to do with what instruction sets your CPU has (and thus whether the build will optimize for that instruction set). If you want to know whether a given instruction set is supported by your CPU, run '''cat /proc/cpuinfo''' and take look at the "flags" section. You will probably want to enable or disable the various instruction set optimizations based on which ones your CPU supports.

''--enable-sse'': Enable [http://en.wikipedia.org/wiki/Streaming_SIMD_Extensions SSE] support by asserting that the OS supports SSE instructions.

''--disable-3dnow'': Disable [http://en.wikipedia.org/wiki/3dnow 3DNOW!] optimizations.

''--disable-altivec'': Disable [http://en.wikipedia.org/wiki/AltiVec AltiVec] optimizations.

==== Other Flags ====

''--disable-asm-optimizations'': Don't use any assembly optimization routines.

''--disable-doxygen-docs'': Disable API documentation building via [[Doxygen]].

''--disable-xmms-plugin'': Do not build [[XMMS]] plugin.

''--disable-rpath'': Do not hardcode runtime library paths.

== Non-Multilib ==

Configure and compile the package:

LIBS=-lm ./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Configure and compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" LD="ld ${LD_BUILD32}" USE_ARCH=32 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" LIBS=-lm ./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Configure and compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" LD="ld ${LD_BUILDN32}" USE_ARCH=n32 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" LIBS=-lm ./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Configure and compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" LD="ld ${LD_BUILD64}" USE_ARCH=64 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" LIBS=-lm ./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package:

make install

FLAC

2007-02-01T00:24:08Z

Kalessin: I updated the package description.

FLAC

2007-02-01T00:04:24Z

Kalessin: I fixed up how the dependencies were labeled.

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://prdownloads.sourceforge.net/flac/flac-{{FLAC-Version}}.tar.gz
|}

----

== Introduction to FLAC ==

FLAC is an audio codec similar to MP3, but lossless, meaning that audio is compressed without losing any information.

== Dependencies ==
=== Optional ===
* [[libogg]]
* [[XMMS]]
* [[NASM]]
* [[DocBook Utils]]
* [[Doxygen]]
* [[Valgrind]]

== Non-Multilib ==

Configure and compile the package:

LIBS=-lm ./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Configure and compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" LD="ld ${LD_BUILD32}" USE_ARCH=32 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" LIBS=-lm ./configure --prefix=/usr &&
make

Install the package:

make install

=== N32 ===

Configure and compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" LD="ld ${LD_BUILDN32}" USE_ARCH=n32 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" LIBS=-lm ./configure --prefix=/usr \
--libdir=/usr/lib32 &&
make

Install the package:

make install

=== 64Bit ===

Configure and compile the package:

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" LD="ld ${LD_BUILD64}" USE_ARCH=64 \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" LIBS=-lm ./configure --prefix=/usr \
--libdir=/usr/lib64 &&
make

Install the package:

make install