CBLFS - User contributions [en]

Python

2017-07-18T13:22:27Z

Kb0iic: 2.7.8 has no multilib patch. William Feely has one for his LFS multilib build: https://www.williamfeely.info/wiki/Lfs-multilib/blfs#Python_2

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.python.org/ftp/python/{{Python-Version}}/Python-{{Python-Version}}.tar.xz
|-valign="top"
!Alternate Requierd Patch (For Multilib):
| Refer to https://www.williamfeely.info/download/lfs-multilib/Python-2.7.6-multilib-1.patch
|-valign="top"
!Required Patch (For Multilib):
| Bad link: http://svn.cross-lfs.org/svn/repos/patches/Python/Python-{{Python-Version}}-multilib-1.patch
|-valign="top"
|}

----

{{Package-Introduction|Python is a dynamic object-oriented programming language that can be used for many kinds of software development. It offers strong support for integration with other languages and tools, comes with extensive standard libraries, and can be learned in a few days. Many Python programmers report substantial productivity gains and feel the language encourages the development of higher quality, more maintainable code.|http://www.python.org/}}

== Dependencies ==

=== Optional ===
* [[OpenSSL]]
* [[Tk]]
* [[GDBM]]
* [[X Window System]]
* [[SQLite3]]
* [[Libffi]]
* [[Bluez]]

== Non-Multilib ==

{{Note|If the test suite ('''make test''') fails because it cannot find python's math library, then you will need to install python before you can run the tests.}}

{{Note|If the installation of python fails, rebuild python. It appears to be somewhat inconsistant with regards to whether it works or not. The ''-fwrapv'' flag used with make attempts to fixes this. If it still doesn't complete '''make install''' without failing, then use '''make -i install''' instead ('''-i''' tells '''make''' to ignore errors). It's less desirable, but it should work. The other option is to run '''make install''' twice. The second time around it locates the installed python libraries it needs for the installation and is able to complete it.}}

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
./configure --prefix=/usr --enable-shared &&
make

Install the package

make install

=== Command Explanations ===

''--enable-shared'': Enables the building of shared libraries.

== Multilib ==

=== 32Bit ===

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
sed -i 's@/lib64@/lib@g' Modules/_ctypes/libffi/m4/libtool.m4 \
Modules/_ctypes/libffi/configure setup.py &&
sed -i "s/'lib64'/'lib'/g" setup.py &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr \
--enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-32} &&
mv -v /usr/bin/python2{,-32} &&
mv -v /usr/bin/python{{Python-Version2}}{,-32} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-32}.h &&
ln -sfv python2.7-32 /usr/bin/python2-32 &&
ln -sfv python2-32 /usr/bin/python-32

=== N32 ===

Change the libdir that Python is going to use to lib32:

patch -Np1 -i ../Python-{{Python-Version}}-multilib-1.patch &&

sed -i -e "s|@@MULTILIB_DIR@@|/lib32|g" Lib/distutils/command/install.py \
Lib/distutils/sysconfig.py \
Lib/pydoc.py \
Lib/site.py \
Lib/sysconfig.py \
Lib/test/test_dl.py \
Lib/test/test_site.py \
Lib/trace.py \
Makefile.pre.in \
Modules/getpath.c \
setup.py

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
sed -i 's@/lib64@/lib32@g' Modules/_ctypes/libffi/m4/libtool.m4 \
Modules/_ctypes/libffi/configure setup.py &&
sed -i "s/'lib64'/'lib32'/g" setup.py &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr \
--libdir=/usr/lib32 --enable-shared &&
make

Install the package

make install &&
mv -v /usr/bin/python{,-n32} &&
mv -v /usr/bin/python2{,-n32} &&
mv -v /usr/bin/python{{Python-Version2}}{,-n32} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-n32}.h &&
ln -sfv python2.7-n32 /usr/bin/python2-n32 &&
ln -sfv python2-n32 /usr/bin/python-n32

=== 64Bit ===

Change the libdir that Python is going to use to lib64:

patch -Np1 -i ../Python-{{Python-Version}}-multilib-1.patch &&

sed -i -e "s|@@MULTILIB_DIR@@|/lib64|g" Lib/distutils/command/install.py \
Lib/distutils/sysconfig.py \
Lib/pydoc.py \
Lib/site.py \
Lib/sysconfig.py \
Lib/test/test_dl.py \
Lib/test/test_site.py \
Lib/trace.py \
Makefile.pre.in \
Modules/getpath.c \
setup.py

Compile the package:

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr \
--libdir=/usr/lib64 --enable-shared &&
make

'''Remark'''
* sed on Modules/getpath.c did not work for me, had to add
sed -i 's@lib/python@lib64/python@g' Modules/getpath.c
* Needed additional explicit export before configure:
export USE_ARCH=64
* Needed LDFLAGS making the call to configure look like this:
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" LDFLAGS="-L/usr/lib64" \
./configure --prefix=/usr --libdir=/usr/lib64 --enable-shared
* Needed EXTRA_CFLAGS for make:
make EXTRA_CFLAGS="-fwrapv"
'''Remark ends'''

Install the package

make install &&
mv -v /usr/bin/python{,-64} &&
mv -v /usr/bin/python2{,-64} &&
mv -v /usr/bin/python{{Python-Version2}}{,-64} &&
ln -sfv python2.7-64 /usr/bin/python2-64 &&
ln -sfv python2-64 /usr/bin/python-64 &&
ln -sfv multiarch_wrapper /usr/bin/python &&
ln -sfv multiarch_wrapper /usr/bin/python2 &&
ln -sfv multiarch_wrapper /usr/bin/python{{Python-Version2}} &&
mv -v /usr/include/python{{Python-Version2}}/pyconfig{,-64}.h

{{Stub-Header|pyconfig|/usr/include/python{{Python-Version2}}}}

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| pydoc, python, python{{Python-Version2}}, python-config, python{{Python-Version2}}-config, smtpd.py, and (if Tk is installed) idle
|-valign="top"
! Installed Libraries:
| libpython{{Python-Version2}}.so and various modules in /usr/lib/lib-dynload
|-valign="top"
! Installed Directories:
| /usr/include/python{{Python-Version2}}, /usr/lib/python{{Python-Version2}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! pydoc
| is a tool for reading python documentation.
|-valign="top"
! python
| is an interpreted, interactive, object-oriented programming language.
|-valign="top"
! python{{Python-Version2}}
| is a version-specific version of '''python'''.
|-valign="top"
! python-config
| is a symlink to '''python{{Python-Version2}}-config'''.
|-valign="top"
! python{{Python-Version}}-config
| ???
|-valign="top"
! smtpd.py
| is a Python implemention of the minimal SMTP protocol as defined in RFC 821.
|-valign="top"
! idle
| is an Integrated DeveLopment Environment (IDLE) for Python. It's based on Tkinter, Python's bindings to the Tk widget set.
|-valign="top"
! libpython{{Python-Version2}}.so
| ???
|}

[[Category:Programming]]

Talk:Wget

2017-04-08T01:59:46Z

Kb0iic:

When moving to new Wget, openssl is going to be detect with pkg-config, also --with-ssl will use gnutls or openssl.
Configure will default to finding gnutls first.

For 32bit builds, use regular PKG_CONFIG_PATH

For N32 builds, use PKG_CONFIG_PATH32

For 64bit builds, use PKG_CONFIG_PATH64

For openssl, use --with-ssl=openssl

I have no clue why we have --with-libdir= options.

Talk:Wget

2017-04-08T01:45:52Z

Kb0iic: Notes for new wget versions.

OpenSSL

2017-04-08T01:08:58Z

Kb0iic: Makes more sense to have x86 instead of x86_64 with the other 32bit target names like sparc, powerpc...

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.openssl.org/source/openssl-{{OpenSSL-Version}}.tar.gz
|-
!Required Patch:
| http://svn.clfs.org/svn/repos/patches/openssl/openssl-{{OpenSSL-Version}}-fix_manpages-1.patch
|-
!Required Patch (x86_64 Multilib):
| http://svn.clfs.org/svn/repos/patches/openssl/openssl-{{OpenSSL-Version}}-32bit_x86_64-1.patch
|-
!Required Patch (MIPS):
| http://svn.clfs.org/svn/repos/patches/openssl/openssl-{{OpenSSL-Version}}-mips_support-1.patch
|-
|Optional Patch:
| http://svn.clfs.org/svn/repos/patches/openssl/openssl-{{OpenSSL-Version}}-fix_parallel_build-1.patch
|}

----

{{Package-Introduction|The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and Open Source toolkit implementing the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols as well as a full-strength general purpose cryptography library.|http://www.openssl.org/ }}

== Dependencies ==

=== Optional ===
* [[bc]] (used by the testsuite)
* [[CVS]] (used by the certificate bundle script)

{{Note|Kerberos support is currently BROKEN, DO NOT USE}}

{{Note|Parallel build (make -j ...) may fail to install openssl but still appear to complete "successfully," without stopping at the error. Apply the parallel build patch:
patch -Np1 -i ../openssl-{{OpenSSL-Version}}-fix_parallel_build-1.patch}}

== Non-Multilib ==

{{Note|When building on Sparc in Pure 64bit, use the configure command from the multilib section, then proceed as normal}}

Compile the package:

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-fix_manpages-1.patch &&
patch -Np1 -i ../openssl-{{OpenSSL-Version}}-mips_support-1.patch &&
./config --openssldir=/etc/ssl --prefix=/usr shared &&
make MANDIR=/usr/share/man

Install the package

make MANDIR=/usr/share/man install &&
ln -sv ../../etc/ssl /usr/share &&
cp -v -r certs /etc/ssl &&
install -v -d -m755 /usr/share/doc/openssl-{{OpenSSL-Version}} &&
cp -v -r doc/{HOWTO,README,*.{txt,html,gif}} \
/usr/share/doc/openssl-{{OpenSSL-Version}}

== Multilib ==

=== 32Bit ===

Apply Patches:

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-fix_manpages-1.patch

Configure the Package (Use the appropriate command):

==== x86 ====

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-32bit_x86_64-1.patch &&
./Configure linux-x86_64-32 --openssldir=/etc/ssl --prefix=/usr shared

==== Sparc ====

./Configure linux-sparcv9 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Little-Endian) ====

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-mips_support-1.patch &&
./Configure linux-mipsel --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-mips_support-1.patch &&
./Configure linux-mips --openssldir=/etc/ssl --prefix=/usr shared

==== PowerPC ====

./Configure linux-ppc --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

USE_ARCH=32 make CC="gcc ${BUILD32}" PERL=/usr/bin/perl

Install the package:

USE_ARCH=32 make PERL=/usr/bin/perl MANDIR=/usr/share/man install

=== N32 ===

Apply Patches:

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-fix_manpages-1.patch &&
patch -Np1 -i ../openssl-{{OpenSSL-Version}}-mips_support-1.patch

Configure the Package (Use the appropriate command):

==== Mips (Little-Endian) ====

./Configure linux-mipsel-n32 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

./Configure linux-mips-n32 --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

USE_ARCH=n32 make CC="gcc ${BUILDN32}" PERL=/usr/bin/perl LIBDIR=lib32

Install the package:

USE_ARCH=n32 make PERL=/usr/bin/perl MANDIR=/usr/share/man LIBDIR=lib32 install

=== 64Bit ===

Apply Patches:

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-fix_manpages-1.patch

Configure the Package (Use the appropriate command):

==== x86_64 ====

./Configure linux-x86_64 --openssldir=/etc/ssl --prefix=/usr shared

==== Sparc ====

./Configure linux64-sparcv9 --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Little-Endian) ====

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-mips_support-1.patch &&
./Configure linux-mips64el --openssldir=/etc/ssl --prefix=/usr shared

==== Mips (Big-Endian) ====

patch -Np1 -i ../openssl-{{OpenSSL-Version}}-mips_support-1.patch &&
./Configure linux-mips64 --openssldir=/etc/ssl --prefix=/usr shared

==== PowerPC ====

./Configure linux-ppc64 --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

USE_ARCH=64 make CC="gcc ${BUILD64}" PERL=/usr/bin/perl LIBDIR=lib64

Install the package:

USE_ARCH=64 make PERL=/usr/bin/perl MANDIR=/usr/share/man LIBDIR=lib64 install &&
ln -sv ../../etc/ssl /usr/share &&
cp -v -r certs /etc/ssl &&
install -v -d -m755 /usr/share/doc/openssl-{{OpenSSL-Version}} &&
cp -v -r doc/{HOWTO,README,*.{txt,html,gif}} \
/usr/share/doc/openssl-{{OpenSSL-Version}}

== Configuring ==

You can create a ca-bundle with the following script, it is from: http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html

cat > mkcabundle.pl << "EOF"
#!/usr/bin/perl -w
#
# Used to regenerate ca-bundle.crt from the Mozilla certdata.txt.
# Run as ./mkcabundle.pl > ca-bundle.crt
#

my $cvsroot = ':pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot';
my $certdata = 'mozilla/security/nss/lib/ckfw/builtins/certdata.txt';

open(IN, "cvs -d $cvsroot co -p $certdata|")
|| die "could not check out certdata.txt";

my $incert = 0;

print<<EOH;
# This is a bundle of X.509 certificates of public Certificate
# Authorities. It was generated from the Mozilla root CA list.
#
# Source: $certdata
#
EOH

while (<IN>) {
if (/^CKA_VALUE MULTILINE_OCTAL/) {
$incert = 1;
open(OUT, "|openssl x509 -text -inform DER -fingerprint")
|| die "could not pipe to openssl x509";
} elsif (/^END/ && $incert) {
close(OUT);
$incert = 0;
print "\n\n";
} elsif ($incert) {
my @bs = split(/\\/);
foreach my $b (@bs) {
chomp $b;
printf(OUT "%c", oct($b)) unless $b eq <nowiki>''</nowiki>;
}
} elsif (/^CVS_ID.*Revision: ([^ ]*).*/) {
print "# Generated from certdata.txt RCS revision $1\n#\n";
}
}
EOF

This command requires that you have Perl and [[CVS]] installed:

./mkcabundle.pl > ca-bundle.crt &&
install -Dv -m644 ca-bundle.crt /etc/ssl/certs

= Contents =

{| style="text-align: left;"
|-
! Installed Programs:
| c_rehash, openssl
|-
! Installed Libraries:
| libcrypto.{so,a}, libssl.{so,a}
|-
! Installed Directories:
| /etc/ssl, /usr/include/ssl, /usr/lib/engines, /usr/share/doc/openssl-{{OpenSSL-Version}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-
! c_rehash
| is a Perl script that scans all files in a directory and adds symbolic links to their hash values.
|-valign="top"
! openssl
| is a command-line tool for using the various cryptography functions of OpenSSL's crypto library from the shell.
|-
! libcrypto.{so,a}
| implements a wide range of cryptographic algorithms used in various Internet standards.
|-
!libssl.{so,a}
| implements the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols
|}

[[Category:Security]]

User talk:Renodr

2015-02-02T04:20:37Z

Kb0iic: Welcome!

'''Welcome to ''CBLFS''!'''
We hope you will contribute much and well.
You will probably want to read the [[Help:Contents|help pages]].
Again, welcome and have fun! [[User:Kb0iic|You feel a whole lot more like you do now than you did when you used to.]] ([[User talk:Kb0iic|talk]]) 20:20, 1 February 2015 (PST)

User:Renodr

2015-02-02T04:20:35Z

Kb0iic: Creating user page for new user.

User talk:JustinK

2015-02-02T04:20:07Z

Kb0iic: Welcome!

2013-08-05T04:44:52Z

Kb0iic: Welcome!

User:Insink71

2013-08-05T04:44:50Z

Kb0iic: Creating user page for new user.

NFS Utilities

2013-07-09T21:10:10Z

Kb0iic:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.kernel.org/pub/linux/utils/nfs/nfs-utils-{{NFS Utilities-Version}}.tar.bz2
|}

----

{{Package-Introduction|The NFS Utilities package contains the userspace server and client tools necessary to use the kernel's NFS abilities. NFS is a protocol that allows sharing file systems over the network.}}

== Dependencies ==

=== Required ===
* [[Portmap]]
=== Optional for NFSv4 Support===
* [[Pkg-config]]
* [[libevent]]
* [[libnfsidmap]]
* [[keyutils]]

=== Optional for GSS (RPC Security) Support ===
* [[Pkg-config]]
* [[libgssapi]]
* [[librpcsecgss]]
* [[MIT krb5]]
* [[SPKM-3]] for Additional SPKM-3 Support

{{user group-nobody nogroup}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc \
--disable-nfsv4 --disable-gss &&
make

Install the package

make install &&
install -dv -m755 /var/lib/nfs/rpc_pipefs

== Multilib ==
'''''This package does not install any libraries so only one installation is needed.'''''

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --sysconfdir=/etc \
--disable-nfsv4 --disable-gss &&
make

{{note|If you choose to enable NFSv4, drop both --disable flags, and append --with-gssglue.
To work around some documented behaviour in libtool that will cause your build to subtly fail, prepend GSSGLUE_CFLAGS="-Wl,-lgssglue" to the start of your configure line.}}

Install the package

make install &&
install -dv -m755 /var/lib/nfs/rpc_pipefs

= Configuring =

Note if you install the nfs-server bootscript you dont need to install the nfs-client bootscript.

{{Note|This is a note about NFSv4 & Kerberos.

Make sure that your clocks are in sync. If the time differers by more then 5 minutes, you will not authenticate even with the correct password / key.

You must also have a working DNS & Reverse DNS Zones. If your FQDN for your host resolves to 127.0.0.1 Kerberos will not work properly either.}}

If you're using nfs4 you should also have host/''<fqdn of client>''@''<REALMNAME.COM>'' in your /etc/krb5.keytab as well as nfs/''<fqdn of client>''@''<REALMNAME.COM>''.

== Client ==

=== NFSv4 ===

Make sure that you have your Kerberos KDC setup then add a client key, then export it to a temporary keytab Each client gets its own keytab for nfs:

kadmin.local -q "addprinc -randkey ''<fqdn of client>''@''<REALMNAME.COM>''"
kadmin.local -q "ktadd -e des-cbc-crc:normal -k temp.keytab nfs/''<fqdn of client>''@''<REALMNAME.COM>''"

Now securely move '''''temp.keytab''''' to '''''/etc/krb5.keytab''''' on the client. Then make sure you change the permissions on the file on the target computer:

chmod 600 /etc/krb5.keytab

If you already have a krb5.keytab on the target computer you can merge the two together with the '''''ktutil''''' command.

=== Bootscript ===

Install the init script from the [[bootscripts]] package:

make install-nfs-client

Create the default configuration file with the following command:

cat > /etc/sysconfig/nfs-client << "EOF"
# Begin /etc/sysconfig/nfs-client

# Change the following line to NFS4=yes if you wish to use nfs4.
NFS4=no

# End /etc/sysconfig/nfs-client
EOF

=== /etc/fstab ===

Below are 2 example entries in /etc/fstab for a nfs mounted '''/home''' and '''/usr'''.

<server-name>:/home /home nfs rw,_netdev,rsize=8192,wsize=8192 0 0
<server-name>:/usr /usr nfs ro,_netdev,rsize=8192 0 0

'''<server-name>''' in the above example is an ip address or a hostname.

== Server ==

=== NFSv4 ===

Make sure that you have your Kerberos KDC setup then add a client key, then export it to a temporary keytab:

kadmin.local -q "addprinc -randkey ''<fqdn of client>''@''<REALMNAME.COM>''"
kadmin.local -q "ktadd -e des-cbc-crc:normal -k temp.keytab nfs/''<fqdn of client>''@''<REALMNAME.COM>''"

Now securely move '''''temp.keytab''''' to '''''/etc/krb5.keytab''''' on the client. Then make sure you change the permissions on the file on the target computer:

chmod 600 /etc/krb5.keytab

If you already have a krb5.keytab on the target computer you can merge the two together with the '''''ktutil''''' command.

=== Bootscript ===

Install the init script from the [[bootscripts]] package:

make install-nfs-server

Create the default configuration file with the following command:

cat > /etc/sysconfig/nfs-server << "EOF"
# Begin /etc/sysconfig/nfs-server

# Change the following line to NFS4=yes if you wish to use nfs4.
NFS4=no

PORT="2049"
PROCESSES="8"
QUOTAS="no"
KILLDELAY="10"

# End /etc/sysconfig/nfs-server
EOF

=== Server Configuration ===

'''/etc/exports''' contains the exported directories on NFS servers. The "NFS HowTo", http://nfs.sourceforge.net/nfs-howto/. contains information on how to configure the servers and clients. For example, for sharing the '''/home''' directory over the local network, the following line may be added:

/home <192.168.0.0/255.255.255.0>(rw,subtree_check,anonuid=99,anongid=99)

[[Category:Servers]]

NFS Utilities

2013-07-09T21:09:25Z

Kb0iic:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.kernel.org/pub/linux/utils/nfs/nfs-utils-{{NFS Utilities-Version}}.tar.bz2
|}

----

{{Package-Introduction|The NFS Utilities package contains the userspace server and client tools necessary to use the kernel's NFS abilities. NFS is a protocol that allows sharing file systems over the network.}}

== Dependencies ==

=== Required ===
* [[Portmap]]
=== Optional for NFSv4 Support===
* [[Pkg-config]]
* [[libevent]]
* [[libnfsidmap]]
* [[keyutils]]

=== Optional for GSS (RPC Security) Support ===
* [[Pkg-config]]
* [[libgssapi]]
* [[librpcsecgss]]
* [[MIT krb5]]
* [[SPKM-3]] for Additional SPKM-3 Support

{{user group-nobody nogroup}}

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc \
--disable-nfsv4 --disable-gss &&
make

Install the package

make install &&
install -dv -m755 /var/lib/nfs/rpc_pipefs

== Multilib ==
'''''This package does not install any libraries so only one installation is needed.'''''

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --sysconfdir=/etc \
--disable-nfsv4 --disable-gss &&
make

{{note|If you choose to enable NFSv4, drop both --disable flags, and append --with-gssglue.
To work around some documented behaviour in libtool that will cause your build to subtly fail,
prepend GSSGLUE_CFLAGS="-Wl,-lgssglue" to the start of your configure line.}}

Install the package

make install &&
install -dv -m755 /var/lib/nfs/rpc_pipefs

= Configuring =

Note if you install the nfs-server bootscript you dont need to install the nfs-client bootscript.

{{Note|This is a note about NFSv4 & Kerberos.

Make sure that your clocks are in sync. If the time differers by more then 5 minutes, you will not authenticate even with the correct password / key.

You must also have a working DNS & Reverse DNS Zones. If your FQDN for your host resolves to 127.0.0.1 Kerberos will not work properly either.}}

If you're using nfs4 you should also have host/''<fqdn of client>''@''<REALMNAME.COM>'' in your /etc/krb5.keytab as well as nfs/''<fqdn of client>''@''<REALMNAME.COM>''.

== Client ==

=== NFSv4 ===

Make sure that you have your Kerberos KDC setup then add a client key, then export it to a temporary keytab Each client gets its own keytab for nfs:

kadmin.local -q "addprinc -randkey ''<fqdn of client>''@''<REALMNAME.COM>''"
kadmin.local -q "ktadd -e des-cbc-crc:normal -k temp.keytab nfs/''<fqdn of client>''@''<REALMNAME.COM>''"

Now securely move '''''temp.keytab''''' to '''''/etc/krb5.keytab''''' on the client. Then make sure you change the permissions on the file on the target computer:

chmod 600 /etc/krb5.keytab

If you already have a krb5.keytab on the target computer you can merge the two together with the '''''ktutil''''' command.

=== Bootscript ===

Install the init script from the [[bootscripts]] package:

make install-nfs-client

Create the default configuration file with the following command:

cat > /etc/sysconfig/nfs-client << "EOF"
# Begin /etc/sysconfig/nfs-client

# Change the following line to NFS4=yes if you wish to use nfs4.
NFS4=no

# End /etc/sysconfig/nfs-client
EOF

=== /etc/fstab ===

Below are 2 example entries in /etc/fstab for a nfs mounted '''/home''' and '''/usr'''.

<server-name>:/home /home nfs rw,_netdev,rsize=8192,wsize=8192 0 0
<server-name>:/usr /usr nfs ro,_netdev,rsize=8192 0 0

'''<server-name>''' in the above example is an ip address or a hostname.

== Server ==

=== NFSv4 ===

Make sure that you have your Kerberos KDC setup then add a client key, then export it to a temporary keytab:

kadmin.local -q "addprinc -randkey ''<fqdn of client>''@''<REALMNAME.COM>''"
kadmin.local -q "ktadd -e des-cbc-crc:normal -k temp.keytab nfs/''<fqdn of client>''@''<REALMNAME.COM>''"

Now securely move '''''temp.keytab''''' to '''''/etc/krb5.keytab''''' on the client. Then make sure you change the permissions on the file on the target computer:

chmod 600 /etc/krb5.keytab

If you already have a krb5.keytab on the target computer you can merge the two together with the '''''ktutil''''' command.

=== Bootscript ===

Install the init script from the [[bootscripts]] package:

make install-nfs-server

Create the default configuration file with the following command:

cat > /etc/sysconfig/nfs-server << "EOF"
# Begin /etc/sysconfig/nfs-server

# Change the following line to NFS4=yes if you wish to use nfs4.
NFS4=no

PORT="2049"
PROCESSES="8"
QUOTAS="no"
KILLDELAY="10"

# End /etc/sysconfig/nfs-server
EOF

=== Server Configuration ===

'''/etc/exports''' contains the exported directories on NFS servers. The "NFS HowTo", http://nfs.sourceforge.net/nfs-howto/. contains information on how to configure the servers and clients. For example, for sharing the '''/home''' directory over the local network, the following line may be added:

/home <192.168.0.0/255.255.255.0>(rw,subtree_check,anonuid=99,anongid=99)

[[Category:Servers]]

User talk:ChaosRind

2013-05-05T12:25:03Z

Kb0iic: Welcome!

User:ChaosRind

2013-05-05T12:25:02Z

Kb0iic: Creating user page for new user.

User talk:Marklight

2013-03-10T22:55:18Z

Kb0iic: Welcome!

User:Marklight

2013-03-10T22:55:17Z

Kb0iic: Creating user page for new user.

Template:Pcre-Version

2013-02-19T02:35:27Z

Kb0iic:

8.32

Usbutils

2013-02-19T01:49:51Z

Kb0iic:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.kernel.org/pub/linux/utils/usb/usbutils/usbutils-{{Usbutils-Version}}.tar.xz
|}

----

{{Package-Introduction||http://www.linux-usb.org/}}

== Dependencies ==

=== Required ===
* [[libusb]]
* [[wget]] for update-usbids

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 update-usbids.sh /usr/sbin/update-usbids

== Multilib ==

'''''This package does not provide any libraries so only one installation is needed.'''''

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" ./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 update-usbids.sh /usr/sbin/update-usbids

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| lsusb and update-usbids
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! lsusb
| is a utility for displaying information about all USB buses in the system and all devices connected to them.
|-valign="top"
! update-usbids
| downloads the current version of the USB ID list. Requires [[Wget]] or [[Lynx]].
|}

[[Category:General Utilities]]

Usbutils

2013-02-19T01:49:30Z

Kb0iic:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.kernel.org/pub/linux/utils/usb/usbutils/usbutils-{{Usbutils-Version}}.tar.xz
|}

----

{{Package-Introduction||http://www.linux-usb.org/}}

== Dependencies ==

=== Required ===
* [[libusb]]
* [[wget]] for update-pciids

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 update-usbids.sh /usr/sbin/update-usbids

== Multilib ==

'''''This package does not provide any libraries so only one installation is needed.'''''

=== 64Bit ===

Compile the package:

CC="gcc ${BUILD64}" PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" ./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 update-usbids.sh /usr/sbin/update-usbids

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| lsusb and update-usbids
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| None
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! lsusb
| is a utility for displaying information about all USB buses in the system and all devices connected to them.
|-valign="top"
! update-usbids
| downloads the current version of the USB ID list. Requires [[Wget]] or [[Lynx]].
|}

[[Category:General Utilities]]

2013-02-19T01:24:31Z

Kb0iic:

0.006

Template:Libidn-Version

2013-02-19T01:03:22Z

Kb0iic:

1.26