CBLFS - User contributions [en]

Template:MySQL-Version

2009-04-24T11:08:40Z

Xep: builds and works on amd64-pure with my recent changes. even with ssp/pie hardening

{{MySQL-Version2}}.34

Qt4

2009-04-24T11:03:08Z

Xep: 4.5.1 builded & tested on amd64-pure with C(|XX)FLAGS="-march=athlon64 -mtune=athlon64 -O3" - builds fine and works really faster

== Making a Selection ==

From here you have two paths you can take. You can either install [[Qt4]] to /usr, not recommended because of conflicts with [[Qt3]] or you can install into /opt, recommended.

* [[Qt4/opt]] (Recommended)
* [[Qt4/usr]]

[[Category:X Libs]]

Qt4/opt

2009-04-24T10:48:50Z

Xep: + '-stl -reduce-relocations -no-separate-debug-info'; - '-no-exceptions' since qtxmlpatterns depend on it

{{Qt4-Common}}

{{Note|Qt4 does not use ''DESTDIR'', it uses ''INSTALL_ROOT'' for the same purpose. Use ''INSTALL_ROOT'' as you would normally use ''DESTDIR''.}}

== Non-Multilib ==

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Make changes for pure64 systems:

for file in $(grep -lr "/lib64" *)
do
sed -i "s@/lib64@/lib@g" $file
done

Compile the package:

mkdir -v /opt/qt-{{Qt4-Version}} &&
ln -v -sfn qt-{{Qt4-Version}} /opt/qt4 &&
./configure -prefix /opt/qt4 \
-libdir /opt/qt4/lib \
-plugindir /opt/qt4/lib/plugins \
-headerdir /opt/qt4/include \
-datadir /opt/qt4/share \
-translationdir /opt/qt4/share/translations \
-docdir /opt/qt4/share/doc/qt \
-demosdir /opt/qt4/share/demos \
-examplesdir /opt/qt4/share/examples \
-sysconfdir /etc/qt4 \
-L/usr/lib \
-qt-gif \
-system-zlib \
-system-libtiff \
-system-libpng \
-system-libmng \
-system-libjpeg \
-openssl \
-opengl \
-glib \
-stl \
-reduce-relocations \
-no-separate-debug-info \
-release &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package

mkdir -v /opt/qt-{{Qt4-Version}} &&
ln -v -sfn qt-{{Qt4-Version}} /opt/qt4 &&
export QMAKESPEC=linux-g++-32 &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure -prefix /opt/qt4 \
-libdir /opt/qt4/lib \
-plugindir /opt/qt4/lib/plugins \
-headerdir /opt/qt4/include \
-datadir /opt/qt4/share \
-translationdir /opt/qt4/share/translations \
-docdir /opt/qt4/share/doc/qt \
-demosdir /opt/qt4/share/demos \
-examplesdir /opt/qt4/share/examples \
-sysconfdir /etc/qt4 \
-L/usr/lib \
-qt-gif \
-system-zlib \
-system-libtiff \
-system-libpng \
-system-libmng \
-system-libjpeg \
-openssl \
-opengl \
-glib \
-stl \
-reduce-relocations \
-no-separate-debug-info \
-release &&
make

Install the package

make install &&
mv -v /opt/qt4/bin/qmake{,-32} &&
mv -v /opt/qt4/bin/uic{,-32} &&
mv -v /opt/qt4/bin/uic3{,-32} &&
mv -v /opt/qt4/bin/moc{,-32} &&
mv -v /opt/qt4/include/Qt/qconfig{,-32}.h &&
mv -v /opt/qt4/include/QtCore/qconfig{,-32}.h

=== N32 ===

TO BE DONE

=== 64Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package

mkdir -v /opt/qt-{{Qt4-Version}} &&
ln -v -sfn qt-{{Qt4-Version}} /opt/qt4 &&
export QMAKESPEC=linux-g++-64 &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure -prefix /opt/qt4 \
-libdir /opt/qt4/lib64 \
-plugindir /opt/qt4/lib64/plugins \
-headerdir /opt/qt4/include \
-datadir /opt/qt4/share \
-translationdir /opt/qt4/share/translations \
-docdir /opt/qt4/share/doc/qt \
-demosdir /opt/qt4/share/demos \
-examplesdir /opt/qt4/share/examples \
-sysconfdir /etc/qt4 \
-L/usr/lib64 \
-qt-gif \
-system-zlib \
-system-libtiff \
-system-libpng \
-system-libmng \
-system-libjpeg \
-openssl \
-opengl \
-glib \
-stl \
-reduce-relocations \
-no-separate-debug-info \
-release &&
make

Install the package

make install &&
mv -v /opt/qt4/bin/qmake{,-64} &&
mv -v /opt/qt4/bin/uic{,-64} &&
mv -v /opt/qt4/bin/uic3{,-64} &&
mv -v /opt/qt4/bin/moc{,-64} &&
mv -v /opt/qt4/include/Qt/qconfig{,-64}.h &&
mv -v /opt/qt4/include/QtCore/qconfig{,-64}.h
ln -sfv /usr/bin/multiarch_wrapper /opt/qt4/bin/qmake &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt4/bin/uic &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt4/bin/uic3 &&
ln -sfv /usr/bin/multiarch_wrapper /opt/qt4/bin/moc

Create two qconfig.h header files which select the actual architecture-dependent qconfig-{32,64}.h header files:

{{Stub-Header|qconfig|/opt/qt4/include/Qt}}
{{Stub-Header|qconfig|/opt/qt4/include/QtCore}}

== Configuring ==

=== Non-Multilib ===

==== /etc/profile.d/20-qt4.sh ====

Create an addition to the [[Bash Startup Files]]:

cat > /etc/profile.d/20-qt4.sh << "EOF"
# Begin /etc/profile.d/20-qt4.sh

export QT4DIR="/opt/qt4"
export PATH="${PATH}:${QT4DIR}/bin"

export PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH+:}${QT4DIR}/lib/pkgconfig"

# End /etc/profile.d/20-qt4.sh
EOF

==== ld.so.conf ====

cat >> /etc/ld.so.conf << "EOF"
# Begin qt4 addition to /etc/ld.so.conf

/opt/qt4/lib

# End qt4 addition
EOF
ldconfig

=== Multilib ===

==== /etc/profile.d/20-qt4.sh ====

Create an addition to the [[Bash Startup Files]]:

cat > /etc/profile.d/20-qt4.sh << "EOF"
# Begin /etc/profile.d/20-qt4.sh

export QT4DIR="/opt/qt4"
export PATH="${PATH}:${QT4DIR}/bin"

export PKG_CONFIG_PATH32="${PKG_CONFIG_PATH32}${PKG_CONFIG_PATH32+:}${QT4DIR}/lib/pkgconfig"
export PKG_CONFIG_PATHN32="${PKG_CONFIG_PATHN32}${PKG_CONFIG_PATHN32+:}${QT4DIR}/lib32/pkgconfig"
export PKG_CONFIG_PATH64="${PKG_CONFIG_PATH64}${PKG_CONFIG_PATH64+:}${QT4DIR}/lib64/pkgconfig"

# End /etc/profile.d/20-qt4.sh
EOF

==== ld.so.conf ====

cat >> /etc/ld.so.conf << "EOF"
# Begin qt4 addition to /etc/ld.so.conf

/opt/qt4/lib
/opt/qt4/lib32
/opt/qt4/lib64

# End qt4 addition
EOF
ldconfig

Qt4/usr

2009-04-24T10:46:12Z

Xep: + '-stl -reduce-relocations -no-separate-debug-info'; - '-no-exceptions' since qtxmlpatterns depend on it

{{Qt4-Common}}

== Non-Multilib ==

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Make changes for pure64 systems:

for file in $(grep -lr "/lib64" *)
do
sed -i "s@/lib64@/lib@g" $file
done

Compile the package:

mkdir -v /usr/qt-{{Qt4-Version}} &&
ln -v -sfn qt-{{Qt4-Version}} /usr/qt4 &&
./configure -prefix /usr/qt4 \
-libdir /usr/qt4/lib \
-plugindir /usr/qt4/lib/plugins \
-headerdir /usr/qt4/include \
-datadir /usr/qt4/share \
-translationdir /usr/qt4/share/translations \
-docdir /usr/qt4/share/doc/qt \
-demosdir /usr/qt4/share/demos \
-examplesdir /usr/qt4/share/examples \
-sysconfdir /etc/qt4 \
-L/usr/lib \
-qt-gif \
-system-zlib \
-system-libtiff \
-system-libpng \
-system-libmng \
-system-libjpeg \
-openssl \
-opengl \
-glib \
-stl \
-reduce-relocations \
-no-separate-debug-info \
-release &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package

mkdir -v /usr/qt-{{Qt4-Version}} &&
ln -v -sfn qt-{{Qt4-Version}} /usr/qt4 &&
export QMAKESPEC=linux-g++-32 &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
./configure -prefix /usr/qt4 \
-libdir /usr/qt4/lib \
-plugindir /usr/qt4/lib/plugins \
-headerdir /usr/qt4/include \
-datadir /usr/qt4/share \
-translationdir /usr/qt4/share/translations \
-docdir /usr/qt4/share/doc/qt \
-demosdir /usr/qt4/share/demos \
-examplesdir /usr/qt4/share/examples \
-sysconfdir /etc/qt4 \
-L/usr/lib \
-qt-gif \
-system-zlib \
-system-libtiff \
-system-libpng \
-system-libmng \
-system-libjpeg \
-openssl \
-opengl \
-glib \
-stl \
-reduce-relocations \
-no-separate-debug-info \
-release &&
make

Install the package

make install &&
mv -v /usr/qt4/bin/qmake{,-32} &&
mv -v /usr/qt4/bin/uic{,-32} &&
mv -v /usr/qt4/bin/uic3{,-32} &&
mv -v /usr/qt4/bin/moc{,-32} &&
mv -v /usr/qt4/include/Qt/qconfig{,-32}.h &&
mv -v /usr/qt4/include/QtCore/qconfig{,-32}.h

=== N32 ===

TO BE DONE

=== 64Bit ===

If you're [[X Window System]] prefix is something other then '''/usr/X11R6''' then run the following command to change the hard coded paths in the sources:

for file in $(grep -lr "X11R6" *)
do
sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" $file
done

Compile the package

mkdir -v /usr/qt-{{Qt4-Version}} &&
ln -v -sfn qt-{{Qt4-Version}} /usr/qt4 &&
export QMAKESPEC=linux-g++-64 &&
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
./configure -prefix /usr/qt4 \
-libdir /usr/qt4/lib64 \
-plugindir /usr/qt4/lib64/plugins \
-headerdir /usr/qt4/include \
-datadir /usr/qt4/share \
-translationdir /usr/qt4/share/translations \
-docdir /usr/qt4/share/doc/qt \
-demosdir /usr/qt4/share/demos \
-examplesdir /usr/qt4/share/examples \
-sysconfdir /etc/qt4 \
-L/usr/lib64 \
-qt-gif \
-system-zlib \
-system-libtiff \
-system-libpng \
-system-libmng \
-system-libjpeg \
-openssl \
-opengl \
-glib \
-stl \
-reduce-relocations \
-no-separate-debug-info \
-release &&
make

Install the package

make install &&
mv -v /usr/qt4/bin/qmake{,-64} &&
mv -v /usr/qt4/bin/uic{,-64} &&
mv -v /usr/qt4/bin/uic3{,-64} &&
mv -v /usr/qt4/bin/moc{,-64} &&
mv -v /usr/qt4/include/Qt/qconfig{,-64}.h &&
mv -v /usr/qt4/include/QtCore/qconfig{,-64}.h
ln -sfv /usr/bin/multiarch_wrapper /usr/qt4/bin/qmake &&
ln -sfv /usr/bin/multiarch_wrapper /usr/qt4/bin/uic &&
ln -sfv /usr/bin/multiarch_wrapper /usr/qt4/bin/uic3 &&
ln -sfv /usr/bin/multiarch_wrapper /usr/qt4/bin/moc

Create two qconfig.h header files which select the actual architecture-dependent qconfig-{32,64}.h header files:

{{Stub-Header|qconfig|/usr/qt4/include/Qt}}
{{Stub-Header|qconfig|/usr/qt4/include/QtCore}}

== Configuring ==

=== Non-Multilib ===

==== /etc/profile.d/20-qt4.sh ====

Create an addition to the [[Bash Startup Files]]:

cat > /etc/profile.d/20-qt4.sh << "EOF"
# Begin /etc/profile.d/20-qt4.sh

export QT4DIR="/usr/qt4"
export PATH="${PATH}:${QT4DIR}/bin"

export PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH+:}${QT4DIR}/lib/pkgconfig"

# End /etc/profile.d/20-qt4.sh
EOF

==== ld.so.conf ====

cat >> /etc/ld.so.conf << "EOF"
# Begin qt4 addition to /etc/ld.so.conf

/usr/qt4/lib

# End qt4 addition
EOF
ldconfig

=== Multilib ===

==== /etc/profile.d/20-qt4.sh ====

Create an addition to the [[Bash Startup Files]]:

cat > /etc/profile.d/20-qt4.sh << "EOF"
# Begin /etc/profile.d/20-qt4.sh

export QT4DIR="/usr/qt4"
export PATH="${PATH}:${QT4DIR}/bin"

export PKG_CONFIG_PATH32="${PKG_CONFIG_PATH32}${PKG_CONFIG_PATH32+:}${QT4DIR}/lib/pkgconfig"
export PKG_CONFIG_PATHN32="${PKG_CONFIG_PATHN32}${PKG_CONFIG_PATHN32+:}${QT4DIR}/lib32/pkgconfig"
export PKG_CONFIG_PATH64="${PKG_CONFIG_PATH64}${PKG_CONFIG_PATH64+:}${QT4DIR}/lib64/pkgconfig"

# End /etc/profile.d/20-qt4.sh
EOF

==== ld.so.conf ====

cat >> /etc/ld.so.conf << "EOF"
# Begin qt4 addition to /etc/ld.so.conf

/usr/qt4/lib
/usr/qt4/lib32
/usr/qt4/lib64

# End qt4 addition
EOF
ldconfig

Template:Qt4-Common

2009-04-24T10:45:57Z

Xep:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.trolltech.com/qt/source/qt-all-opensource-src-{{Qt4-Version}}.tar.bz2
|}

----

{{Package-Introduction|Qt is a comprehensive development framework that includes an extensive array of features, capabilities and tools that enable development of high-performance, cross-platform rich-client and server-side applications. Qt is the GUI framework on which [[KDE4]] is built and Qt4 is the version of Qt that the [[KDE4]] is use. You can of course use Qt for non-KDE applications as well, but if you wish to use [[KDE4]] or any [[KDE4]]-based applications, you must have Qt4 installed on your system.|http://www.qtsoftware.com/products/appdev}}

== Dependencies ==

=== Required ===
* [[X Window System]]

=== Optional ===
* [[CUPS]]
* [[D-BUS]]
* [[Firebird]]
* [[FontConfig]]
* [[FreeType]]
* [[Glib2]]
* [[GStreamer]]
* [[libjpeg]]
* [[libmng]]
* [[libpng]]
* [[LibTIFF]]
* [[MySQL]]
* [[NAS]]
* [[OpenSSL]]
* [[PostgreSQL]]
* [[SQLite]]
* [[SQLite3]]
* [[unixODBC]]
* Xinerama provided by and [[X Window System]]
* Xfixes provided by and [[X Window System]]

== Configuration Information ==

If you would like to compile with [[MySQL]] support add the following to the configure command:

-plugin-sql-mysql -I/usr/include/mysql

If you would like to compile with [[PostgreSQL]] support add the following to the configure command:

-plugin-sql-psql -I/usr/include/postgresql/server

If you would like to compile with [[SQLite]] support add the following to the configure command:

-plugin-sql-sqlite2 -system-sqlite

If you would like to compile with [[SQLite3]] support add the following to the configure command:

-plugin-sql-sqlite -system-sqlite

If you would like to compile with [[unixODBC]] support add the following to the configure command:

-plugin-sql-odbc

If you would like to compile with [[NAS]] support add the following to the configure command:

-system-nas-sound

If you would like to disable Qt 3 support functionality add the following to the configure command:

-no-qt3support

If you would like to disable QtWebKit module add the following to the configure command:

-no-webkit

If you would like to disable linking Qt libraries and executables using the library install path as a runtime library path add the following to the configure command:

-no-rpath

If you don't need qtxmlpatterns add the following to the configure command (since only qtxmlpatterns requires this):

-no-exceptions

If your [[X Window System]] is '''NOT''' Xorg, then add to configure:

-no-xfixes

If you want optimized qmake tool add the following to the configure command:

-optimized-qmake

If you would like to disable GLib event loop (which is known to be buggy) add the following to the configure command:

-no-glib

{{Note|Also you can disable GLib event loop at runtime by setting NO_GLIB environment variable to 1.}}

If you don't want to compile demos (save compile time) add the following to the configure command:

-nomake demos

If you don't want to compile examples (save compile time) add the following to the configure command:

-nomake examples

If your [[GCC]] is '''NOT''' gcc4 you probably need to disable visibility explicitly. Just add the following to the configure command:

-no-reduce-exports

Template:Qt4-Common

2009-04-24T10:38:53Z

Xep: +'-no-exceptions'; +gcc<4 note

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| ftp://ftp.trolltech.com/qt/source/qt-all-opensource-src-{{Qt4-Version}}.tar.bz2
|}

----

{{Package-Introduction|Qt is a comprehensive development framework that includes an extensive array of features, capabilities and tools that enable development of high-performance, cross-platform rich-client and server-side applications. Qt is the GUI framework on which [[KDE4]] is built and Qt4 is the version of Qt that the [[KDE4]] is use. You can of course use Qt for non-KDE applications as well, but if you wish to use [[KDE4]] or any [[KDE4]]-based applications, you must have Qt4 installed on your system.|http://www.qtsoftware.com/products/appdev}}

== Dependencies ==

=== Required ===
* [[X Window System]]

=== Optional ===
* [[CUPS]]
* [[D-BUS]]
* [[Firebird]]
* [[FontConfig]]
* [[FreeType]]
* [[Glib2]]
* [[GStreamer]]
* [[libjpeg]]
* [[libmng]]
* [[libpng]]
* [[LibTIFF]]
* [[MySQL]]
* [[NAS]]
* [[OpenSSL]]
* [[PostgreSQL]]
* [[SQLite]]
* [[SQLite3]]
* [[unixODBC]]
* Xinerama provided by and [[X Window System]]
* Xfixes provided by and [[X Window System]]

== Configuration Information ==

If you would like to compile with [[MySQL]] support add the following to the configure command:

-plugin-sql-mysql -I/usr/include/mysql

If you would like to compile with [[PostgreSQL]] support add the following to the configure command:

-plugin-sql-psql -I/usr/include/postgresql/server

If you would like to compile with [[SQLite]] support add the following to the configure command:

-plugin-sql-sqlite2 -system-sqlite

If you would like to compile with [[SQLite3]] support add the following to the configure command:

-plugin-sql-sqlite -system-sqlite

If you would like to compile with [[unixODBC]] support add the following to the configure command:

-plugin-sql-odbc

If you would like to compile with [[NAS]] support add the following to the configure command:

-system-nas-sound

If you would like to disable Qt 3 support functionality add the following to the configure command:

-no-qt3support

If you would like to disable QtWebKit module add the following to the configure command:

-no-webkit

If you would like to disable linking Qt libraries and executables using the library install path as a runtime library path add the following to the configure command:

-no-rpath

If you don't need qxmlpatterns add the following to the configure command (since only qxmlpatterns requires this):

-no-exceptions

If your [[X Window System]] is '''NOT''' Xorg, then add to configure:

-no-xfixes

If you want optimized qmake tool add the following to the configure command:

-optimized-qmake

If you would like to disable GLib event loop (which is known to be buggy) add the following to the configure command:

-no-glib

{{Note|Also you can disable GLib event loop at runtime by setting NO_GLIB environment variable to 1.}}

If you don't want to compile demos (save compile time) add the following to the configure command:

-nomake demos

If you don't want to compile examples (save compile time) add the following to the configure command:

-nomake examples

If your [[GCC]] is '''NOT''' gcc4 you probably need to disable visibility explicitly. Just add the following to the configure command:

-no-reduce-exports

Template:Qt4-Version

2009-04-24T10:04:25Z

Xep:

4.5.1

Template:Iptables-Version

2009-04-20T16:29:31Z

Xep:

1.4.3.2

Template:GMime-Version

2009-04-20T16:28:24Z

Xep:

{{GMime-Version2}}.6

Template:Iso-codes-Version

2009-04-20T16:27:44Z

Xep:

3.8

Template:GIT-Version

2009-04-20T16:27:10Z

Xep:

1.6.2.3

Avahi

2009-04-20T16:25:03Z

Xep:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://avahi.org/download/avahi-{{Avahi-Version}}.tar.gz
|-
|}

----

{{Package-Introduction|According to Avahi's site: Avahi is a system which facilitates service discovery on a local network. This means that you can plug your laptop or computer into a network and instantly be able to view other people who you can chat with, find printers to print to or find files being shared. This kind of technology is already found in Apple MacOS X (branded Rendezvous, Bonjour and sometimes Zeroconf) and is very convenient. Avahi is mainly based on Lennart Poettering's flexmdns mDNS implementation for Linux which has been discontinued in favour of Avahi.|http://www.avahi.org/}}

== Dependencies ==
See http://www.avahi.org/wiki/DownloadAvahi#Requirements for more information.

=== Required ===
* [[Expat]]
* [[Intltool]]
* [[libdaemon]]
* [[Perl Module XML::Parser]]

=== Recommended ===
* [[D-BUS]]
* [[D-BUS Glib]]
* [[Glib2]]

=== Optional ===
* [[Doxygen]]
* [[GDBM]] or [[Berkeley DB]]
* [[Gtk2]]
* [[libcap]]
* [[Libglade]]
* [[Mono]] and [[Monodoc]]
* [[Pkg-config]]
* [[PyGTK]] and [[D-BUS Python]]
* [[Pyrex]] and [[Python]] (Built with [[GDBM]])
* [[PyTwisted]]
* [[Qt3]]
* [[Qt4]]

== Avahi Users/Groups ==

The avahi user is running the Avahi daemon:

groupadd -g 20 avahi &&
useradd -c "Avahi Daemon User" -d /dev/null \
-u 20 -g avahi -s /bin/false avahi

The avahi-autoipd user/group is for running the avahi-autoipd daemon:

groupadd -g 21 avahi-autoipd &&
useradd -c "Avahi AutoIP Daemon User" -d /dev/null \
-u 21 -g avahi-autoipd -s /bin/false avahi-autoipd

The netdev group is a priviliged access group for Avahi clients:

groupadd -g 22 netdev

== Configure Options ==

If you do not have any of following packages installed pass the appropriate options to configure:

--disable-glib
--disable-qt3
--disable-qt4
--disable-gtk
--disable-dbus
--disable-expat
--disable-mono --disable-monodoc

If you want to enable the HOWL compat layer:

--enable-compat-howl

If you want to enable to libdns_sd compat layer:

--enable-compat-libdns_sd

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var --with-distro=none &&
make

Install the package

make install

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \
./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var --with-distro=none &&
make

Install the package

make install

=== N32 ===

Compile the package:

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \
./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var --libdir=/usr/lib32 \
--with-distro=none &&
make

Install the package

make install

=== 64Bit ===

Compile the package:
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \
./configure --prefix=/usr --sysconfdir=/etc \
--localstatedir=/var --libdir=/usr/lib64 \
--with-distro=none &&
make

Install the package

make install

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/include/avahi-ui, /etc/avahi, /usr/include/avahi-compat-howl, /usr/include/avahi-compat-libdns_sd, /usr/share/avahi, /usr/lib/python2.5/site-packages/avahi, /usr/include/avahi-client, /usr/include/avahi-qt3, /usr/include/avahi-core, /usr/include/avahi-glib, usr/include/avahi-common
|-valign="top"
!Installed Programs:
|bssh, avahi-autoipd, avahi-bookmarks, avahi-discover, avahi-browse, avahi-resolve, avahi-publish, avahi-set-host-name, avahi-dnsconfd, avahi-daemon, avahi-discover-standalone
|-valign="top"
!Installed Libraries:
|libavahi-ui.{a,la,so}, libhowl.{a,la,so}, libdns_sd.{a,la,so}, libavahi-client.{a,la,so}, libavahi-qt3.{a,la,so}, libavahi-core.{a,la,so}, libavahi-glib.{a,la,so}, libavahi-common.{a,la,so}
|}
== Configuring ==

=== Bootscript ===

There currently isn't a pre-written bootscript for avahi-autoipd and avahi-dnsconfd.

* '''avahi-daemon''' - The Avahi mDNS/DNS-SD daemon.
* '''avahi-autoipd''' - IPv4LL network address configuration daemon. For use in an ad-hoc network where there is a lack of a DHCP server.
* '''avahi-dnsconfd''' - Unicast DNS server from mDNS/DNS-SD configuration daemon. Connects to a running avahi-daemon and runs the script /etc/avahi/dnsconfd.action for each unicast DNS server that is announced on the local LAN.

[[Category:Network Utilities]]

Template:Avahi-Version

2009-04-20T16:24:59Z

Xep:

0.6.25

Template:NSPR-Version

2009-04-20T16:14:47Z

Xep:

4.7.4

Template:NSS-Config-Name

2009-04-20T16:14:30Z

Xep:

nss-3.12-r2-config.in

Template:NSS-Version

2009-04-20T16:12:32Z

Xep:

3.12.3

Template:Poppler-Version

2009-04-20T16:10:45Z

Xep:

0.10.6

Template:Dhcpcd-Version

2009-04-20T16:09:59Z

Xep:

4.0.13

Template:MPFR-Version

2009-04-19T02:36:43Z

Xep:

2.4.1

Template:Yasm-Version

2009-04-19T02:34:59Z

Xep:

0.8.0

Template:Libssh2-Version

2009-04-19T02:29:55Z

Xep:

1.1

ICU

2009-04-19T02:28:17Z

Xep:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://download.icu-project.org/files/icu4c/{{ICU-Version2}}/icu4c-{{ICU-Version}}-src.tgz
|}

----

{{Package-Introduction|ICU (International Components for Unicode) is a mature, widely used set of C/C++ and Java libraries providing Unicode and Globalization support for software applications.|http://site.icu-project.org}}

----

== Dependencies ==

=== Optional ===
* [[Doxygen]]

== Non-Multilib ==

Compile the package:

cd source &&
for x in CFLAGS CXXFLAGS CPPFLAGS LDFLAGS ; do
sed -i -e "/^${x} =.*/s:@${x}@::" config/Makefile.inc.in
done &&
./configure --prefix=/usr \
--disable-debug --disable-samples &&
make

Install the package:

make install

== Multilib ==

=== 32Bit ===

Compile the package:

cd source &&
for x in CFLAGS CXXFLAGS CPPFLAGS LDFLAGS ; do
sed -i -e "/^${x} =.*/s:@${x}@::" config/Makefile.inc.in
done &&
USE_ARCH=32 PKG_CONFIG_PATH=${PKG_CONFIG_PATH32} \
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
./configure --prefix=/usr --libdir=/usr/lib \
--disable-debug --disable-samples &&
make

Install the package:

make install &&
mv -v /usr/bin/icu-config{,-32}

=== N32 ===

Compile the package:

To do ...

Install the package:

make install

=== 64Bit ===

Compile the package:

cd source &&
for x in CFLAGS CXXFLAGS CPPFLAGS LDFLAGS ; do
sed -i -e "/^${x} =.*/s:@${x}@::" config/Makefile.inc.in
done &&
USE_ARCH=64 PKG_CONFIG_PATH=${PKG_CONFIG_PATH64} \
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
./configure --prefix=/usr --libdir=/usr/lib64 \
--disable-debug --disable-samples &&
make

Install the package:

make install &&
mv -v /usr/bin/icu-config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/icu-config

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/include/unicode, /usr/include/layout, /usr/share/icu/{{ICU-Version2}}
|-valign="top"
!Installed Programs:
|makeconv, genrb, derb, genuca, genbrk, genctd, gencnval, gensprep, genccode, gencmn, icupkg, pkgdata, icuswap, uconv, icu-config
|-valign="top"
!Installed Libraries:
|libicudata.so, libicuuc.so, libicui18n.so, libicule.so, libiculx.so, libicutu.so, libicutest.so, libicuio.so
|}

[[Category:General Utilities]]

Template:Hal-info-Version

2009-04-19T02:21:21Z

Xep:

20090414

Template:Hdparm-Version

2009-04-19T02:20:59Z

Xep:

9.15

Template:Vlc-Version

2009-04-10T02:54:02Z

Xep:

0.9.9a

Template:Mpg123-Version

2009-04-09T17:18:43Z

Xep:

1.7.2

Template:Hdparm-Version

2009-04-09T17:17:48Z

Xep:

9.14

Reiser4

2009-03-30T01:31:35Z

Xep:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
|-valign="top"
| http://www.kernel.org/pub/linux/utils/fs/reiser4/reiser4progs/reiser4progs-{{Reiser4-Version}}.tar.bz2
|-valign="top"
!Download Required Library:
|-valign="top"
| http://www.kernel.org/pub/linux/utils/fs/reiser4/libaal/libaal-{{libaal-Version}}.tar.bz2
|-valign="top"
!Download Kernel Patch:
|-valign="top"
| http://www.kernel.org/pub/linux/kernel/people/edward/reiser4/reiser4-for-2.6/reiser4-for-2.6.25.patch.bz2
|-
| http://www.kernel.org/pub/linux/kernel/people/edward/reiser4/reiser4-for-2.6/reiser4-for-2.6.27.patch.bz2
|-
| http://www.kernel.org/pub/linux/kernel/people/edward/reiser4/reiser4-for-2.6/reiser4-for-2.6.28.patch.bz2
|-
| http://svn.cross-lfs.org/svn/repos/patches/linux-2.6.28.7/linux-2.6.28.7-reiser4-grab_cache_page-1.patch
|-
| http://www.kernel.org/pub/linux/kernel/people/edward/reiser4/reiser4-for-2.6/reiser4-for-2.6.29.patch.bz2
|}

----

{{Package-Introduction|The Reiser4 file system is a very fast atomic file system developed by Namesys. The Reiser4 package contains various utilities for managing reiser4fs (version 4) partitions.|}}

{{Note|The official Namesys site is closed. Destiny of the Reiser4 project is unknown. Support of Reiser4fs is included in the Edward's kernel patchsets.}}

== Dependencies ==

=== Required ===
* libaal >= {{libaal-Version}}
* kernel patch for your kernel version

=== Optional ===
* grub >= 0.97-reiser4-20050808

== Building Reiser4 Enabled Kernel ==

Patch your kernel with the appropriate reiser4-for-2.6.<x>-patch, where <x> is your kernel minor version from the list of patches above.

gunzip -c reiser4-for-2.6.<x>.patch.gz | patch -p1

Patch your kernel with patch if you kernel version is a 2.6.28.<z>

patch -Np1 -i linux-2.6.28.7-reiser4-grab_cache_page-1.patch

{{Note|When configuring the kernel, please make sure that you do NOT select (removed in recent kernels):
Kernel hacking ---> Use 4Kb for kernel stacks instead of 8Kb
}}

Configure the kernel and DO select the following option:

Code maturity level options ---> Prompt for development and/or incomplete code/drivers

Compile the kernel:

make

Boot with new, Reiser4 enabled kernel before continuing.

== Building Reiser4 Package ==

=== Non-Multilib ===

Compile libaal:

./configure --prefix=/usr --libdir=/lib &&
make

Install libaal

make install

Compile the package:

./configure --prefix=/usr --sbindir=/sbin --libdir=/lib &&
make

Install the package

make install

=== Multilib ===

==== 32Bit ====

Compile libaal:

CC="gcc ${BUILD32}" ./configure --prefix=/usr --libdir=/lib &&
make

Install libaal

make install

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr --sbindir=/sbin --libdir=/lib &&
make

Install the package

make install

==== N32 ====

Compile libaal:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/lib32 &&
make

Install libaal

make install

Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --sbindir=/sbin --libdir=/lib32 &&
make

Install the package

make install

==== 64Bit ====

Compile libaal:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/lib64 &&
make

Install libaal

make install

Compile the package:

CC="gcc ${BUILD64}" ./configure --prefix=/usr --sbindir=/sbin --libdir=/lib64 &&
make

Install the package

make install

== Contents ==

{| style="text-align: left;"
|-
! Installed Programs:
| mkfs.reiser4, make_reiser4, debugfs.reiser4, measurefs.reiser4, fsck.reiser4
|-
! Installed Libraries:
| libaal.{a,so}, libaal-minimal.{a,so}, libreiser4.{a,so}, libreiser4-minimal.{a,so}, librepair.{a,so}
|-
! Installed Directories:
| /usr/include/aal, /usr/include/reiser4, /usr/include/repair
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
!libaal
|library that provides application abstraction mechanism. It includes device abstraction, libc independence code, etc.
|-
!debugfs.reiser4
|can sometimes help to solve problems with Reiser4 file systems.
|-
!mkfs.reiser4, make_reiser4
|creates a Reiser4 file system.
|-
!fsck.reiser4
|is used to check or repair a Reiser4 file system.
|-
!measurefs.reiser4
|the program for measuring reiser4 filesystem parameters (fragmentation, node packing, etc.).
|}

[[Category:File System]]

MySQL

2009-03-30T01:28:05Z

Xep: jump to MySQL 5.1 series. works fine for me (amd64-pure {-march=athlon64 -O3}). report any inconvenience please!

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://mysql.mirrors.hoobly.com/Downloads/MySQL-{{MySQL-Version2}}/mysql-{{MySQL-Version}}.tar.gz
|}

----

{{Package-Introduction|MySQL is a widely used and fast SQL database server. It is a client/server implementation that consists of a server daemon and many different client programs and libraries.|http://www.mysql.com/}}

== Dependencies ==

=== Optional ===
* [[OpenSSL]]
* [[TCP Wrappers]]

== MySQL User/Group ==

groupadd -g 40 mysql &&
useradd -c "MySQL Server" -d /dev/null -g mysql -s /bin/false -u 40 mysql

== Configure options ==

You can pass '''--with-mysqld-ldflags=-all-static''' configure option if You don't use LDAP for groups in /etc/nsswitch.conf. According to MySQL, it brings >10% performance gain if enabled.

--with-mysqld-ldflags=-all-static

Turn Secure Connections on

--with-ssl

Use "fast" mutexes

--with-fast-mutexes

{{Note|Keep '''--with-readline''' configure option until successful build with '''--without-readline''' will reported.}}

== Non-Multilib ==

Compile the package (32Bit target):

CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1" \
./configure --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Compile the package (64Bit target):

CFLAGS="${CFLAGS} -fPIC" \
CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1 -fPIC" \
./configure --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--with-pic --with-lib-ccflags=-fPIC \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
rm -rf /tmp/mysql &&
cd /usr/lib &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
LDFLAGS="-L/usr/lib" \
CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1" \
./configure --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-32} &&
rm -rf /tmp/mysql &&
cd /usr/lib &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

=== N32 ===

Compile the package

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1" \
./configure --prefix=/usr --libdir=/usr/lib32 \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-n32} &&
rm -rf /tmp/mysql &&
cd /usr/lib32 &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

=== 64Bit ===

Compile the package

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
CFLAGS="${CFLAGS} -fPIC" \
CXXFLAGS="${CXXFLAGS} -fno-exceptions -fno-rtti -fno-strict-aliasing \
-fno-implicit-templates -felide-constructors -DBIG_JOINS=1 -fPIC" \
./configure --prefix=/usr --libdir=/usr/lib64 \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-assembler \
--enable-local-infile \
--without-debug \
--with-libwrap --with-readline \
--with-geometry \
--with-low-memory \
--without-pstack \
--without-docs \
--with-pic --with-lib-ccflags=-fPIC \
--enable-thread-safe-client \
--with-client-ldflags=-lstdc++ \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-plugins=csv,myisam,myisammrg,heap,innobase \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/mysql_config &&
rm -rf /tmp/mysql &&
cd /usr/lib64 &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

== Configuring ==

Make sure your hostname is not a "localhost"

hostname

Install default config

install -v -m644 /usr/share/mysql/my-medium.cnf /etc/my.cnf

Make convenience links for mysqlcheck multi-call binary

ln -sv mysqlcheck /usr/bin/mysqlanalyze &&
ln -sv mysqlcheck /usr/bin/mysqlrepair &&
ln -sv mysqlcheck /usr/bin/mysqloptimize

Secure the logfiles and runfiles

install -v -m755 -o mysql -g mysql -d /var/run/mysql &&
install -v -m750 -o mysql -g mysql -d /var/log/mysql &&
touch /var/log/mysql/mysql.{log,err} &&
chown mysql:mysql /var/log/mysql/mysql* &&
chmod 0660 /var/log/mysql/mysql*

Install MySQL databases

/usr/bin/mysql_install_db --user=mysql &&
chgrp -v mysql /srv/mysql{,/test,/mysql}

Start server in 'safe' mode

mysqld_safe --user=mysql 2>&1 >/dev/null &

Set password for the mysql 'root' user

mysqladmin -u root password '<new-password>'

Fill help tables

/usr/bin/mysql --user=root --password mysql < /usr/share/mysql/fill_help_tables.sql

Fill timezones

/usr/bin/mysql_tzinfo_to_sql /usr/share/zoneinfo > /tmp/mysql_tzinfo.sql &&
/usr/bin/mysql --user=root --password mysql < /tmp/mysql_tzinfo.sql

Shutdown server

mysqladmin -p shutdown

=== BootScript ===

Install the init script included in the [[bootscripts]] package:

make install-mysql

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/include/mysql, /usr/share/mysql, /usr/lib/mysql
|-valign="top"
!Installed Programs:
|mysqld_safe, mysql_install_db, msql2mysql, mysql_config, mysql_fix_privilege_tables, mysql_fix_extensions, mysql_setpermission, mysql_secure_installation, mysql_zap, mysqlaccess, mysqlbug, mysql_convert_table_format, mysql_find_rows, mysqlhotcopy, mysqldumpslow, mysql_explain_log, mysql_tableinfo, mysql_upgrade_shell, mysqld_multi, replace, comp_err, perror, resolveip, my_print_defaults, resolve_stack_dump, mysql_waitpid, innochecksum, myisamchk, myisamlog, myisampack, myisam_ftdump, mysql_tzinfo_to_sql, mysqld, mysql, mysqladmin, mysqlcheck, mysqlshow, mysqldump, mysqlimport, mysqltest, mysqlbinlog, mysql_upgrade, mysqltestmanagerc, mysqltestmanager-pwgen, mysql_client_test, mysqltest_embedded, mysqltestmanager, mysqlmanager
|-valign="top"
!Installed Libraries:
|libmystrings.a, libmysys.a, libdbug.a, libmyisam.a, libmyisammrg.a, libheap.a, libvio.a, libmysqlclient_r.{a,la,so}, libmysqlclient.{a,la,so}, libmysqld.a
|}

[[Category:Servers]]

Template:MySQL-Version

2009-03-30T01:04:50Z

Xep:

{{MySQL-Version2}}.32

Template:MySQL-Version2

2009-03-30T01:04:35Z

Xep:

5.1

Template:Libssh2-Version

2009-03-29T23:20:35Z

Xep:

1.0

MySQL

2009-03-26T14:42:39Z

Xep: almost 5.1! 5.1.3x needs some additional checks (buggy --without-readline for ex.)

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://mysql.mirrors.hoobly.com/Downloads/MySQL-5.0/mysql-{{MySQL-Version}}.tar.gz
|}

----

{{Package-Introduction|MySQL is a widely used and fast SQL database server. It is a client/server implementation that consists of a server daemon and many different client programs and libraries.|http://www.mysql.com/}}

== Dependencies ==

=== Optional ===
* [[OpenSSL]]
* [[TCP Wrappers]]

{{Note|--with-berkely-db will instruct the build system to use the internal version of [[Berkeley DB]] (Version 4.1.24). This is highly recommended as building against the an external installation rarely compiles cleanly. Berkeley DB support is deprecated and will be removed in future versions.}}

== MySQL User/Group ==

groupadd -g 40 mysql &&
useradd -c "MySQL Server" -d /dev/null -g mysql -s /bin/false -u 40 mysql

== Non-Multilib ==

Compile the package:

C_EXTRA_FLAGS="-fno-exceptions -fno-rtti -fno-strict-aliasing -fno-implicit-templates" \
./configure --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-thread-safe-client \
--enable-assembler \
--enable-local-infile \
--without-debug \
--without-bench \
--without-readline \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-innodb \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
rm -rf /tmp/mysql &&
cd /usr/lib &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" \
LDFLAGS="-L/usr/lib" \
C_EXTRA_FLAGS="-fno-exceptions -fno-rtti -fno-strict-aliasing -fno-implicit-templates" \
./configure --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-thread-safe-client \
--enable-assembler \
--enable-local-infile \
--without-debug \
--without-bench \
--without-readline \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-innodb \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-32} &&
rm -rf /tmp/mysql &&
cd /usr/lib &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

=== N32 ===

Compile the package

CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" \
C_EXTRA_FLAGS="-fno-exceptions -fno-rtti -fno-strict-aliasing -fno-implicit-templates" \
./configure --prefix=/usr --libdir=/usr/lib32 \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-thread-safe-client \
--enable-assembler \
--enable-local-infile \
--without-debug \
--without-bench \
--without-readline \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-innodb \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-n32} &&
rm -rf /tmp/mysql &&
cd /usr/lib32 &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

=== 64Bit ===

Compile the package

CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" \
C_EXTRA_FLAGS="-fno-exceptions -fno-rtti -fno-strict-aliasing -fno-implicit-templates" \
./configure --prefix=/usr --libdir=/usr/lib64 \
--sysconfdir=/etc \
--libexecdir=/usr/sbin \
--localstatedir=/srv/mysql \
--enable-thread-safe-client \
--enable-assembler \
--enable-local-infile \
--without-debug \
--without-bench \
--without-readline \
--with-extra-charsets=all \
--with-mysqld-user=mysql \
--with-server \
--with-innodb \
--with-unix-socket-path=/var/run/mysql/mysql.sock \
--with-embedded-server \
--with-embedded-privilege-control &&
make testdir=/tmp/mysql

Install the package

make testdir=/tmp/mysql install &&
mv -v /usr/bin/mysql_config{,-64} &&
ln -sfv multiarch_wrapper /usr/bin/mysql_config &&
rm -rf /tmp/mysql &&
cd /usr/lib64 &&
ln -v -sf mysql/libmysqlclient{,_r}.so* .

== Configuring ==

install -v -m644 /usr/share/mysql/my-medium.cnf /etc/my.cnf

mysql_install_db --user=mysql &&
chgrp -v mysql /srv/mysql{,/test,/mysql}

install -v -m755 -o mysql -g mysql -d /var/run/mysql &&
mysqld_safe --user=mysql 2>&1 >/dev/null &

mysqladmin -u root password '<new-password>'

mysqladmin -p shutdown

=== BootScript ===

Install the init script included in the [[bootscripts]] package:

make install-mysql

== Contents ==

{| style="text-align: left;"
|-valign="top"
!Installed Directories:
|/usr/include/mysql, /usr/share/mysql, /usr/lib/mysql
|-valign="top"
!Installed Programs:
|mysqld_safe, mysql_install_db, msql2mysql, mysql_config, mysql_fix_privilege_tables, mysql_fix_extensions, mysql_setpermission, mysql_secure_installation, mysql_zap, mysqlaccess, mysqlbug, mysql_convert_table_format, mysql_find_rows, mysqlhotcopy, mysqldumpslow, mysql_explain_log, mysql_tableinfo, mysql_upgrade_shell, mysqld_multi, replace, comp_err, perror, resolveip, my_print_defaults, resolve_stack_dump, mysql_waitpid, innochecksum, myisamchk, myisamlog, myisampack, myisam_ftdump, mysql_tzinfo_to_sql, mysqld, mysql, mysqladmin, mysqlcheck, mysqlshow, mysqldump, mysqlimport, mysqltest, mysqlbinlog, mysql_upgrade, mysqltestmanagerc, mysqltestmanager-pwgen, mysql_client_test, mysqltest_embedded, mysqltestmanager, mysqlmanager
|-valign="top"
!Installed Libraries:
|libmystrings.a, libmysys.a, libdbug.a, libmyisam.a, libmyisammrg.a, libheap.a, libvio.a, libmysqlclient_r.{a,la,so}, libmysqlclient.{a,la,so}, libmysqld.a
|}

[[Category:Servers]]

Template:Gst-plugins-ugly-Version

2009-03-25T22:41:39Z

Xep:

{{Gstreamer-Version2}}.11

Template:Gst-plugins-bad-Version

2009-03-25T22:41:29Z

Xep:

{{Gstreamer-Version2}}.11

Template:Gst-ffmpeg-Version

2009-03-25T22:41:16Z

Xep:

{{Gstreamer-Version2}}.7

Template:Liboil-Version

2009-03-25T22:31:47Z

Xep:

0.3.16

Template:Iptables-Version

2009-03-25T10:08:12Z

Xep:

1.4.3.1

OpenAstroMenace

2009-03-23T17:28:52Z

Xep:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Sources:
|-
| http://switch.dl.sourceforge.net/sourceforge/openastromenace/openamenace-src-{{AstroMenace-Version}}.tar.bz2
|-
!Required Patch:
|-
| http://svn.cross-lfs.org/svn/repos/patches/openastromenace/openastromenace-{{AstroMenace-Version}}-cmake-1.patch
|-
!Download Data:
|-
| http://switch.dl.sourceforge.net/sourceforge/openastromenace/oamenace-data-{{AstroMenace-Version}}.tar.bz2
|-
| http://switch.dl.sourceforge.net/sourceforge/openastromenace/oamenace-lang-de-{{AstroMenace-Version}}.tar.bz2
|-
| http://switch.dl.sourceforge.net/sourceforge/openastromenace/oamenace-lang-en-{{AstroMenace-Version}}.tar.bz2
|-
| http://switch.dl.sourceforge.net/sourceforge/openastromenace/oamenace-lang-ru-{{AstroMenace-Version}}.tar.bz2
|}

----

{{Package-Introduction|Space is a vast area, an unbounded territory where it seems there is a room for everybody, but reversal of fortune put things differently. The hordes of hostile creatures crawled out from the dark corners of the universe, craving to conquer your homeland. Their force is compelling, their legions are interminable. However, humans didn’t give up without a final showdown and put their best pilot to fight back. These malicious invaders chose the wrong galaxy to conquer and you are to prove it! Go ahead and make alien aggressors regret their insolence.|http://sourceforge.net/projects/openastromenace/}}

----
== Dependencies ==

=== Required ===
* [[CMake]]
* [[SDL]]
* [[OpenAL]]
* [[ALUT]]
* [[libogg]]
* [[libvorbis]]
* [[libjpeg]]

== Non-Multilib ==

Compile the package:

patch -p0 -i openastromenace-{{AstroMenace-Version}}-cmake-1.patch &&
cd build &&
cmake .. -DCMAKE_BUILD_TYPE=Release -DDATADIR=/opt/games/share/AstroMenace &&
make

Install binaries and data:

mkdir -pv /opt/games/{bin,share/AstroMenace}
mv -v AstroMenace /opt/games/bin
tar -xvf oamenace-data-{{AstroMenace-Version}}.tar.bz2 -C /opt/games/share/AstroMenace
tar -xvf oamenace-lang-en-{{AstroMenace-Version}}.tar.bz2 -C /opt/games/share/AstroMenace
ln -sv gamelang_en.vfs /opt/games/share/AstroMenace/gamelang.vfs

== Multilib ==

TODO...

Template:AstroMenace-Version

2009-03-23T16:51:53Z

Xep:

1.2.0

OpenAstroMenace

2009-03-23T15:43:46Z

Xep: AstroMenace moved to OpenAstroMenace: AstroMenace now is opensourced /* prefer opensource projects over closedsource */

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Arch:
| http://www.viewizard.com/download/amenace{{AstroMenace-Version}}.tar.bz2
|}

----

{{Package-Introduction|Space is a vast area, an unbounded territory where it seems there is a room for everybody, but reversal of fortune put things differently. The hordes of hostile creatures crawled out from the dark corners of the universe, craving to conquer your homeland. Their force is compelling, their legions are interminable. However, humans didn’t give up without a final showdown and put their best pilot to fight back. These malicious invaders chose the wrong galaxy to conquer and you are to prove it! Go ahead and make alien aggressors regret their insolence.|http://www.viewizard.com/}}

----
== Dependencies ==

=== Runtime Required ===
* [[SDL]]
* [[OpenAL]]
* [[ALUT]]
* [[libogg]]
* [[libvorbis]]
* [[libjpeg]]

== Non-Multilib ==

If you have a '''Pure64''' system create a link so the path to ld.so is correct:

mkdir -v /lib64 &&
ln -sv /lib/ld-linux-x86-64.so.2 /lib64/ld-linux-x86-64.so.2

Install binaries and data:

tar -xvf amenace{{AstroMenace-Version}}.tar.bz2 -C /opt/games

== Multilib ==

Install binaries and data:

tar -xvf amenace{{AstroMenace-Version}}.tar.bz2 -C /opt/games

Main Page

2009-03-23T15:41:47Z

Xep: /* Games */

Valgrind

2009-03-23T15:38:39Z

Xep:

{| style="text-align: left; background-color: AliceBlue;"
|-
!Download Source:
| http://www.valgrind.org/downloads/valgrind-{{Valgrind-version}}.tar.bz2
|-
|Required Patch:
| http://svn.cross-lfs.org/svn/repos/patches/valgrind-{{Valgrind-version}}/valgrind-{{Valgrind-version}}-local-labels-1.patch
|}

----

{{Package-Introduction|Valgrind is a GPL'd system for debugging and profiling Linux programs. With Valgrind's tool suite you can automatically detect many memory management and threading bugs, avoiding hours of frustrating bug-hunting, making your programs more stable. You can also perform detailed profiling to help speed up your programs.|http://www.valgrind.org/}}

== Dependencies ==
'''''It appears that only x86, x86_64, ppc, and ppc64 are supported.'''''

=== Required ===
* [[GDB]]

== Non-Multilib ==

On a pure64 system you need to pass '''--enable-only64bit''' to configure to prevent it from trying to build multiarch.

Compile the package:

patch -Np1 -i valgrind-{{Valgrind-version}}-local-labels-1.patch &&
sed -i -e 's:^CFLAGS="-Wno-long-long":CFLAGS="$CFLAGS -Wno-long-long":' configure.in &&
autoconf &&
./configure --prefix=/usr &&
make

Install the package:

make install

== Multilib ==

=== 64bit ===

Compile the package:

patch -Np1 -i valgrind-{{Valgrind-version}}-local-labels-1.patch &&
sed -i -e 's:^CFLAGS="-Wno-long-long":CFLAGS="$CFLAGS -Wno-long-long":' configure.in &&
autoconf &&
./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package:

make install &&
sed "/arch=/s:=.*:="$(sed -e '/VG_PLATFORM_PRI/!d' -e 's/.*= //' -e 's/_.*//' Makefile | \
tr <nowiki>[[:upper:]] [[:lower:]]</nowiki>)":" valgrind.pc > /usr/lib64/pkgconfig/valgrind.pc
sed "/arch=/s:=.*:="$(sed -e '/VG_PLATFORM_SEC/!d' -e 's/.*= //' -e 's/_.*//' Makefile | \
tr <nowiki>[[:upper:]] [[:lower:]]</nowiki>)":" valgrind.pc > /usr/lib/pkgconfig/valgrind.pc

[[Category:Programming]]

Template:Valgrind-version

2009-03-23T15:08:36Z

Xep:

3.4.1

Little cms

2009-03-22T18:01:21Z

Xep:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://www.littlecms.com/lcms-{{Little cms-Version}}.tar.gz
|}

----

{{Package-Introduction|Little cms is a small-footprint, speed optimized, color management engine in open source form.|http://www.littlecms.com/}}

== Dependencies ==

=== Optional ===
*[[LibTIFF]]
*[[libjpeg]]
*[[Python]] (with [[SWIG]] installed)

== Non-Multilib ==

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/lcms-{{Little cms-Version}} &&
install -v -m644 README.1ST doc/* /usr/share/doc/lcms-{{Little cms-Version}}

== Multilib ==

=== 32Bit ===

Compile the package:

CC="gcc ${BUILD32}" ./configure --prefix=/usr &&
make

Install the package

make install

=== N32 ===
Compile the package:

CC="gcc ${BUILDN32}" ./configure --prefix=/usr --libdir=/usr/lib32 &&
make

Install the package

make install

=== 64Bit ===

Compile the package

CC="gcc ${BUILD64}" ./configure --prefix=/usr --libdir=/usr/lib64 &&
make

Install the package

make install &&
install -v -m755 -d /usr/share/doc/lcms-{{Little cms-Version}} &&
install -v -m644 README.1ST doc/* /usr/share/doc/lcms-{{Little cms-Version}}

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| icc2ps, icclink, icctrans, wtpt and optionally, jpegicc, tiffdiff and tifficc
|-valign="top"
! Installed Libraries:
| liblcms.{so,a} and the optional _lcms.so Python module
|-valign="top"
! Installed Directories:
| /usr/share/doc/lcms-{{Little cms-Version}}
|}

=== Short Descriptions ===

{| style="text-align: left;"
|-valign="top"
! icc2ps
| generates PostScript CRD or CSA from ICC profiles.
|-valign="top"
! icclink
| links two or more profiles into a single device link profile.
|-valign="top"
! icctrans
| is a color space conversion calculator.
|-valign="top"
! jpegicc
| is an ICC profile applier for JPEG files.
|-valign="top"
! tifficc
| is an ICC profile applier for TIFF files.
|-valign="top"
! wtpt
| shows media white of profiles, identifying black body locus.
|-valign="top"
! liblcms.{so,a}
| is used by the lcms programs as well as other programs to provide color management facilities.
|}

[[Category:Graphics Libraries]]

Template:Little cms-Version

2009-03-22T18:00:10Z

Xep:

1.18

Template:Hdparm-Version

2009-03-22T16:41:23Z

Xep:

9.13

Template:SWIG-Version

2009-03-21T16:21:20Z

Xep:

1.3.39

Main Page

2009-03-19T17:15:30Z

Xep: /* General Utilities */

Welcome to Community Driven BLFS.

== NOTICE ==

'''Please don't add information from BLFS without acknowledging the source. BLFS is copyrighted but copying is allowed with attribution.'''

When adding packages please add a CONTENT section so everyone knows what the package does. Thank you. You can find a script [[User:Weibullguy|here]] that can be used to make this task reasonably pain free. The script even formats the output so a simple copy and paste is all you need to do (in most cases).

If you have problems building any packages in CBLFS and are unable to find the solution yourself, please do not use the "Talk" section associated with the package. You will receive no help, but your entry will be deleted. Most of the CLFS and CBLFS developers and users hang out at chat.freenode.net in the #cross-lfs channel. Your odds of receiving help dramatically improve if you stop by #cross-lfs or post on the mailing list.

== What is Community Driven BLFS ==

Community Driven BLFS (CBLFS) is an open project that takes over after you have completed a Cross-LFS based build. While there's a veritable [[Who's Who]] of CBLFS, as the name implies anyone in the community may contribute. Your contributions are welcome; from multilib build instructions for Open Office to spelling and grammar corrections. You can find a list of packages that are referenced but still need build instructions in the [http://cblfs.cross-lfs.org/index.php/Special:Wantedpages Wanted Pages] if you don't have anything particular in mind.

There are only three requirements and one strong suggestion for contributing to CBLFS. First, read and heed the applicable portions of the '''NOTICE''' section above. Second, please follow the page format that is set. There is a link to the page template below. Explanatory comments are in bold green text and should, obviously, be removed. Always check the template as changes ''are'' made periodically.

Third, upload patches in accordance with the instructions below. These instructions will help you create and format the file before uploading. Please don't provide links to patches or other files stored on your personal server.

Finally, there are many good open-source spell checking applications. In fact, there are build instructions for [[Aspell]] in this wiki. Please install and use a spell checker when contributing.

* [[Page_Template|Page Template]]
* [http://patches.cross-lfs.org/patch-submitter/ How to upload patches]
* [[License]]

In addition to this Wiki, you may also be interested in visting the [http://hints.cross-lfs.org/index.php/Main_Page CLFS-Hints Wiki].

== Post CLFS Configuration ==
* [[Bash Startup Files]]
* [[System User and Groups]]
* [[Configuring for Adding Users]]
* [[Creating an Initramfs]]
== How To ==
* [[NSS Caching]]

= Packages in the Wiki =

== [[:Category:Security|Security]] ==
<dpl>category=Security</dpl>

== [[:Category:Block Device|Block Device]] ==
<dpl>category=Block Device</dpl>

== [[:Category:File System|File System]] ==
<dpl>category=File System</dpl>

== [[:Category:Hardware Monitoring|Hardware Monitoring]] ==
<dpl>category=Hardware Monitoring</dpl>

== [[:Category:Text Editors|Text Editors]] ==
<dpl>category=Text Editors</dpl>

== [[:Category:General_Libs|General Libraries]] ==
<dpl>category=General Libs</dpl>

== Graphics and Font Libraries ==
* [[AAlib]]
* [[babl]]
* [[Dcraw]]
* [[Exiv2]]
* [[FLTK]]
* [[FreeGLUT]]
* [[FreeType]]
* [[FriBidi]]
* [[FontConfig]]
* [[GD]]
* [[GifLib]]
* [[glitz]]
* [[GtkSpell]]
* [[IlmBase]]
* [[Imlib]]
* [[Imlib2]]
* [[JasPer]]
* [[jbig2dec]]
* [[JBIG-Kit]]
* [[kipi-plugins]]
* [[KSquirrel-libs]]
* [[libart_lgpl]]
* [[libexif]]
* [[libexif-gtk]]
* [[libggi]]
* [[libjpeg]]
* [[libkdcraw]]
* [[libkexif]]
* [[libkexiv2]]
* [[libkipi]]
* [[libwmf]]
* [[libmng]]
* [[libpng]]
* [[librsvg]]
* [[LibTIFF]]
* [[little cms]]
* [[Netpbm]]
* [[OpenEXR]]
* [[PLIB]]
* [[t1lib]]
* [[Tk]]
* [[UFRaw]]
* [[VTK]]

== [[:Category:General Utilities|General Utilities]] ==
* [[afio]]
* [[anacron]]
* [[bash-completion]]
* [[bash-completion-config]]
* [[Bc]]
* [[boost]]
* [[cabextract]]
* [[ConsoleKit]]
* [[Console-tools]]
* [[cpio]]
* [[D-BUS]]
* [[Desktop-file-utils]]
* [[Dialog]]
* [[diffstat]]
* [[eject]]
* [[Ebook-tools]]
* [[emelFM2]]
* [[Enca]]
* [[Fcron]]
* [[FontForge]]
* [[FUSE]]
* [[gcolor2]]
* [[gnokii]]
* [[GNU Pth]]
* [[GParted]]
* [[GPM]]
* [[Gtk-Doc]]
* [[HAL]]
* [[hal-info]]
* [[hdparm]]
* [[Hyperestraier]]
* [[hwinfo]]
* [[ICU]]
* [[initng]]
* [[initng-conf-gtk]]
* [[Intltool]]
* [[iso-codes]]
* [[logrotate]]
* [[Lomoco]]
* [[Lzip]]
* [[mc]]
* [[Opensync]]
* [[Orange]]
* [[Parted]]
* [[PCI Utilities]]
* [[Pilot-Link]]
* [[pinentry]]
* [[pkg-config]]
* [[pmount]]
* [[PodSleuth]]
* [[PolicyKit]]
* [[QDBM]]
* [[rkhunter]]
* [[rpm2cpio]]
* [[rpm2targz]]
* [[Screen]]
* [[ScrollKeeper]]
* [[sdparm]]
* [[sg3_utils]]
* [[Sharutils]]
* [[Star]]
* [[Strigi]]
* [[Sysklogd]]
* [[Syslog-ng]]
* [[Sysfsutils]]
* [[Tidy]]
* [[Tre]]
* [[unifdef]]
* [[UnixODBC]]
* [[unrar]]
* [[Unzip]]
* [[usbutils]]
* [[Vixie-Cron]]
* [[Wget]]
* [[Which]]
* [[xdelta]]
* [[xmlto]]
* [[Zip]]

== Programming ==
* [[ACPICA]]
* [[Apache Ant]]
* [[APR]]
* [[APR-util]]
* [[Autogen]]
* [[BJam]]
* [[ccache]]
* [[Check]]
* [[Chicken]]
* [[CMake]]
* [[CppUnit]]
* [[ctags]]
* [[DDD]]
* [[DejaGnu]]
* [[Dev86]]
* [[DevHelp]]
* [[Distcc]]
* [[Doxygen]]
* [[Expect]]
* [[FaCiLe]]
* [[gc]]
* [[GCC]]
* [[GCC-3.3]] (libstdc++.so.5)
* [[GCL]]
* [[GDB]]
* [[GDL]]
* [[Geany]]
* [[Kommander]]
* [[libfc]]
* [[libgda]]
* [[libglade]]
* [[libglademm]]
* [[Gengetopt]]
* [[Glade2]]
* [[Glade3]]
* [[GMP]]
* [[Gperf]]
* [[Graphviz]]
* [[Guile]]
* [[Guile-GTK]]
* [[iiview]]
* [[Jam]]
* [[JDK]]
* [[Log4cxx]]
* [[Lua]]
* [[MPFR]]
* [[NASM]]
* [[Objective Caml]]
* [[OpenJDK]]
* [[Perl Modules]]
* [[PHP]]
* [[Python]]
* [[Python Modules]]
* [[RLog]]
* [[Ruby]]
* [[SWIG]]
* [[smake]]
* [[Strace]]
* [[Valgrind]]
* [[XPontus]]
* [[Yasm]]

== C# ==
* [[Evolution-Sharp]]
* [[Galago-Sharp]]
* [[Gnome-Sharp]]
* [[Gsf-Sharp]]
* [[Gtk-Sharp]]
* [[libgdiplus]]
* [[Mono]]
* [[Mono-Addins]]
* [[Monodoc]]

== [[:Category:Source Code Management|Source Code Management]] ==
<dpl>category=Source Code Management</dpl>

== Networking ==
* [[aria2]]
* [[arno-iptables-firewall]]
* [[Avahi]]
* [[BIND]]
* [[BIND Utilities]]
* [[bluez]]
* [[bluez-libs]]
* [[bluez-utils]]
* [[Dhcpcd]]
* [[Curl]]
* [[curlftpfs]]
* [[FreeNX]]
* [[ifplugd]]
* [[inetutils]]
* [[iptables]]
* [[libbtctl]]
* [[libpcap]]
* [[imap c-client]]
* [[mDNSResponder]]
* [[minicom]]
* [[Netplug]]
* [[NetTools]]
* [[OpenOBEX]]
* [[OpenSLP]]
* [[PPP]]
* [[SSHFS]]
* [[SWAT]]
* [[Wireless tools]]
* [[WPA Supplicant]]
* [[Xinetd]]

== Network Drivers ==
* [[MadWifi]]
* [[NdisWrapper]]
* [[BroadCom]] (BCM4311 BCM4312 BCM4321 BCM4322)

== Networking Libraries ==
* [[libdownload]]
* [[libnl]]
* [[librsync]]
* [[libsoup]]
* [[neon]]
* [[Serf]]

== Network Applications ==
* [[bridge-utils]]
* [[Dhcdbd]]
* [[dvb-apps]]
* [[netcat]]
* [[net-Snmp]]
* [[netstat]]
* [[NetworkManager]]
* [[Nmap]]
* [[NTP]]
* [[OpenVPN]]
* [[Portmap]]
* [[qca2]]
* [[rdesktop]]
* [[RRDTool]]
* [[socat]]
* [[TCPDump]]
* [[Traceroute]]
* [[TSClient]]
* [[Whois]]
* [[Wireshark]]

== Web Browser/Mail/News/Chat/P2P/FTP Clients ==
* [[Ekiga]]
* [[Fetchmail]]
* [[gFTP]]
* [[irssi]]
* [[Kermit]]
* [[Links]]
* [[Lynx]]
* [[microdc2]]
* [[Mutt]]
* [[Postfix]]
* [[Procmail]]
* [[Sim]]
* [[sSMTP]]
* [[Trix]]
* [[weechat]]

== Servers ==
* [[Apache]]
* [[Berkeley DB]]
* [[Courier-Authlib]]
* [[Courier-IMAP]]
* [[Dhcp]]
* [[Dovecot]]
* [[Exim]]
* [[MySQL]]
* [[nginx]]
* [[NFS Utilities]]
* [[OpenLDAP]]
* [[OpenSSH]]
* [[PostgreSQL]]
* [[ProFTPD]]
* [[Qmail]]
* [[Rarpd]]
* [[Rsnapshot]]
* [[Rsync]]
* [[Samba]]
* [[Sendmail]]
* [[Squid]]
* [[Squirrelmail]]
* [[tftp-hpa]]
* [[Vsftpd]]

== [[:Category:Shells|Shells]] ==
<dpl>category=Shells</dpl>

== [[:Category:Power Management|Power Management]] ==
<dpl>category=Power Management</dpl>

== X ([[X Window System]]) ==
* [[Xorg6]]
* [[Xorg7/Intro|Xorg7]]

== X Libraries ==
* [[ATK]]
* [[Beagle]]
* [[Cairo]]
* [[Cairomm]]
* [[DjVuLibre]]
* [[GLEW]]
* [[goffice]]
* [[Gtk1]]
* [[Gtk2]]
* [[Gtk+-Extras]]
* [[Gtkmm]]
* [[Gtk-Qt-Engine]]
* [[Gtk-vnc]]
* [[hicolor-icon-theme]]
* [[icon-naming-utils]]
* [[LessTif]]
* [[libcm]]
* [[libnotify]]
* [[libsexy]]
* [[libwnck]]
* [[libxklavier]]
* [[notification-daemon]]
* [[Pango]]
* [[Pangomm]]
* [[Poppler]]
* [[Qt3]]
* [[Qt4]]
* [[Shared-MIME-Info]]
* [[startup-notification]]
* [[Tapioca-qt]]
* [[Telepathy-qt]]
* [[Tracker]]
* [[wxWidgets]]
* [[Xaw3d]]
* [[XCB]]

== Desktops/Window Managers ==
* [[AfterStep]]
* [[Blackbox]]
* [[Compiz Fusion]]
* [[dr17]]
* [[Fluxbox]]
* [[Fvwm]]
* [[Gnome]]
* [[Icewm]]
* [[iDesk]]
* [[KDE]]
* [[KDE4]]
* [[Lxde]]
* [[Metacity]]
* [[Openbox]]
* [[ratpoison]]
* [[vtwm]]
* [[Xfce]]

== X VNC ==
* [[x11vnc]]
* [[RealVNC]]
* [[TightVNC]]

== X Window Applications ==
* [[3DDesktop]]
* [[aDesklets]]
* [[Avant Window Navigator]]
* [[Beryl]]
* [[Conky]]
* [[Gkrellm]]
* [[Krusader]]
* [[KXDocker]]
* [[Pdfedit]]
* [[QuickSynergy]]
* [[Slim]]
* [[Synergy2]]
* [[XDaliClock]]
* [[Xpdf]]
* [[XScreenSaver]]
* [[Yakuake]]

== [[:Category:GUI Clients|X Web Browser/Mail/News/Chat/P2P Clients]] ==
<dpl>category=GUI Clients</dpl>

== Media and Libraries ==
* [[ALSA]]
* [[ALUT]]
* [[Audio File]]
* [[DivX4Linux]]
* [[Dirac]]
* [[EsounD]]
* [[eSpeak]]
* [[FAAC]]
* [[FAAD2]]
* [[FLAC]]
* [[Gpac]]
* [[GStreamer]]
* [[Id3lib]]
* [[libburn]]
* [[Liba52]]
* [[Libao]]
* [[Libass]]
* [[libcaca]]
* [[libcddb]]
* [[libcdio]]
* [[Libdv]]
* [[libdvbpsi]]
* [[libdvdcss]]
* [[libdvdnav]]
* [[Libdvdread]]
* [[libFAME]]
* [[libid3]]
* [[libid3tag]]
* [[libisofs]]
* [[libogg]]
* [[libopendaap]]
* [[libvorbis]]
* [[libmad]]
* [[libmatroska]]
* [[libmikmod]]
* [[libmodplug]]
* [[libmpd]]
* [[libmpeg2]]
* [[LibMPEG3]]
* [[libmtp]]
* [[libMusicBrainz]]
* [[libMusicBrainz3]]
* [[libnjb]]
* [[libofa]]
* [[Secret Rabbit Code | libsamplerate]]
* [[libvisual]]
* [[libvisual-plugins]]
* [[libquicktime]]
* [[libshout]]
* [[libsndfile]]
* [[live555]]
* [[MedCon]]
* [[MPD]]
* [[MPEG4IP]]
* [[Musepack]]
* [[NAS]]
* [[opal]]
* [[OpenAL]]
* [[PortAudio]]
* [[PulseAudio]]
* [[pwlib]]
* [[SDL]]
* [[GUIlib]]
* [[SDL_gfx]]
* [[SDL_image]]
* [[SDL_net]]
* [[SDL_mixer]]
* [[SDL_sound]]
* [[SDL_ttf]]
* [[Secret Rabbit Code]]
* [[SMPEG]]
* [[Speex]]
* [[Swfdec]]
* [[TagLib]]
* [[Theora]]
* [[TunePimp]]
* [[TwoLAME]]
* [[vec2web]]
* [[Wavpack]]
* [[x264]]
* [[Xine Libraries]]
* [[XviD]]
* [[xvid4conf]]

== Media Utilities ==
* [[Amarok]]
* [[Asunder]]
* [[Audacious]]
* [[audacious-plugins]]
* [[Avifile]]
* [[Banshee]]
* [[Bonk]]
* [[CDParanoia-III]]
* [[FFmpeg]]
* [[gimmix]]
* [[Gnomad2]]
* [[Grip]]
* [[gxine]]
* [[gnash]]
* [[iTouch-Control]]
* [[Kaffeine]]
* [[LAME]]
* [[LiVES]]
* [[MJPEG Tools]]
* [[Mpg123]]
* [[MPlayer]]
* [[MPlayerplug-in]]
* [[Normalize]]
* [[Ogle]]
* [[RipperX]]
* [[Seom]]
* [[shntool]]
* [[smplayer]]
* [[soundkonverter]]
* [[SoX]]
* [[Tagtool]]
* [[Timidity]]
* [[Transcode]]
* [[vcdimager]]
* [[vlc]]
* [[Vorbis Tools]]
* [[XMMS]]

== TV tuner/Radio playing and recording ==
* [[ivtv]]
* [[lirc]]
* [[MythTV]]

== Graphics Editing/Viewing ==
* [[Blender]]
* [[Ghostview]]
* [[GIMP]]
* [[Gutenprint]]
* [[Gqview]]
* [[GraphicsMagick]]
* [[ImageMagick]]
* [[Inkscape]]
* [[KSquirrel]]
* [[POV-Ray]]
* [[sodipodi]]
* [[Gpicview]]

== Printing ==
* [[CUPS]]
* [[Ghostscript]]
* [[Foomatic]]
* [[libpaper]]
* [[LPRng]]
* [[IJS]]
* [[hplip]]

== [[:Category:PostScript|PostScript]] ==
<dpl>category=PostScript</dpl>

== [[:Category:Scanning|Scanning]] ==
<dpl>category=Scanning</dpl>

== [[:Category:Cameras|Cameras]] ==
<dpl>category=Cameras</dpl>

== CD/DVD-Writing Utilities ==
* [[Cdrtools]]
* [[Cdrdao]]
* [[Cdrkit]]
* [[Daa2iso]]
* [[DVDAuthor]]
* [[DVDAuthorWizard]]
* [[dvd+rw-tools]]
* [[dvd-slideshow]]
* [[Graveman!]]
* [[K3b]]
* [[kmediafactory]]
* [[Uif2iso]]
* [[XcdRoast]]
* [[DVD::RIP]]

== [[:Category:Emulators|Emulators]] ==
<dpl>category=Emulators</dpl>

== DocBook ==
* [[DocBook SGML]]
* [[DocBook XML]]

== Type Setting ==
* [[teTeX]]
* [[JadeTeX]]

== [[:Category:Games|Games]] ==
<dpl>category=Games</dpl>
* [[AstroMenace|AstroMenace (Closed-Source)]]
* [[FlightGear]]
* [[Freeciv]]
* [[Lincity-ng]]
* [[SimGear]]
* [[TORCS]]

== [[:Category:Science_Engineering|Science/Engineering/Mathematics]] ==
<dpl>category=Science_Engineering</dpl>

== [[:Category:Clusters_Grids|Clusters, Grids, and Parallel Programming]] ==
<dpl>category=Clusters_Grids</dpl>

== [[:Category:Financial|Financial Libraries and Utilities]] ==
<dpl>category=Financial</dpl>

== [[:Category:Office_Suites|Office Suites and Productivity]] ==
<dpl>category=Office_Suites</dpl>

== Drivers ==
=== Input ===
* [[Synaptics]]
* [[Wacom|Wacom graphic tablet drivers]]

=== Video ===
* [[NVIDIA|NVIDIA Graphics Driver]]

=== Printers ===
* [[hplip]] (HJP drivers for inkjet, laser and More!)
* [[Samsung]] (ML series and some xeon lasers)

== Closed-Source Applications and Plugins ==
* [[Adobe Reader]]
* [[Flash Player]]
* [[Lightscribe]]
* [[Opera]]
* [[RealPlayer]]

== [[:Category:Benchmarking|Benchmarking]] ==
<dpl>category=Benchmarking</dpl>

== [[:Category:Package Management|Package Management]] ==
<dpl>category=Package Management</dpl>

Acpid

2009-03-19T17:14:33Z

Xep:

{| style="text-align: left; background-color: AliceBlue;"
|-valign="top"
!Download Source:
| http://prdownloads.sourceforge.net/acpid/acpid-{{Acpid-Version}}.tar.gz
|}

----

{{Package-Introduction|The Advanced Configuration & Power Interface Daemon (ACPID) is a flexible and totally extensible daemon for responding to ACPI events. It listens to /proc/acpi/event and executes programs to handle the events when they occur. The programs it executes are configured through a set of configuration files.|https://sourceforge.net/projects/acpid/}}

== Dependencies ==

=== Optional ===
* [[Hdparm]]

== Non-Multilib ==

Compile the package:

sed -i "s/-Werror//g" Makefile &&
make

Install the package

make install

== Multilib ==
'''''This package does not provide any libraries so only one installation is needed.'''''

=== 32Bit ===

Compile the package:

sed -i "s/-Werror//g" Makefile &&
make CC="gcc ${BUILD32}"

Install the package

make install

=== N32 ===

Compile the package:

sed -i "s/-Werror//g" Makefile &&
make CC="gcc ${BUILDN32}"

Install the package

make install

=== 64Bit ===

Compile the package:

sed -i "s/-Werror//g" Makefile &&
make CC="gcc ${BUILD64}"

Install the package

make install

== Configuring ==

=== Configuring Events ===

The following sample event included with Acpid will set the hard drive to spindown after 5 minutes when the computer is on battery power but keep it on 100% of the time while the computer is plugged in:

mkdir -pv /etc/acpi/events &&
cp -v samples/battery/battery.conf /etc/acpi/events &&
cp -v samples/battery/battery.sh /etc/acpi &&
chmod 755 /etc/acpi/battery.sh

The above sample depends on [[Hdparm]] to function properly.

=== Bootscript ===

Create the bootscript:

cat > /etc/rc.d/init.d/acpid << "EOF"
#!/bin/sh
# Begin $rc_base/init.d/acpid

. /etc/sysconfig/rc
. ${rc_functions}

case "${1}" in
start)
boot_mesg "Starting acpid..."
loadproc /usr/sbin/acpid
;;

stop)
boot_mesg "Stopping acpid..."
killproc /usr/sbin/acpid
;;

restart)
${0} stop
sleep 1
${0} start
;;

status)
statusproc /usr/sbin/acpid
;;

*)
echo "Usage: ${0} {start|stop|restart|status}"
exit 1
;;
esac

# End $rc_base/init.d/acpid
EOF
chmod -v 754 /etc/rc.d/init.d/acpid

Link it into the runlevels:

for link in /etc/rc.d/rc{{0,1,6}.d/K32,{2,3,4,5}.d/S18}acpid; do
ln -sfv ../init.d/acpid $link;
done

= Contents =

{| style="text-align: left;"
|-valign="top"
! Installed Programs:
| acpid acpi_listen
|-valign="top"
! Installed Libraries:
| None
|-valign="top"
! Installed Directories:
| None
|}

[[Category:Power Management]]