OpenSSL

Download Source:	http://www.openssl.org/source/openssl-1.0.1e.tar.gz
Required Patch:	http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-1.0.1e-fix_manpages-1.patch
Required Patch (x86_64 Multilib):	http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-1.0.1e-32bit_x86_64-1.patch
Required Patch (MIPS):	http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-1.0.1e-mips_support-1.patch
Optional Patch:	http://svn.cross-lfs.org/svn/repos/patches/openssl/openssl-1.0.1e-fix_parallel_build-1.patch

---

Introduction to OpenSSL

The OpenSSL Project is a collaborative effort to develop a robust, commercial-grade, full-featured, and Open Source toolkit implementing the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols as well as a full-strength general purpose cryptography library.

Project Homepage: http://www.openssl.org/

Dependencies

Optional

• bc (used by the testsuite)
• CVS (used by the certificate bundle script)

Note

Kerberos support is currently BROKEN, DO NOT USE

Note

Parallel build (make -j ...) may fail to install openssl but still appear to complete "successfully," without stopping at the error. Apply the parallel build patch: patch -Np1 -i ../openssl-1.0.1e-fix_parallel_build-1.patch

Non-Multilib

Note

When building on Sparc in Pure 64bit, use the configure command from the multilib section, then proceed as normal

Compile the package:

patch -Np1 -i ../openssl-1.0.1e-fix_manpages-1.patch &&
patch -Np1 -i ../openssl-1.0.1e-mips_support-1.patch &&
./config --openssldir=/etc/ssl --prefix=/usr shared &&
make MANDIR=/usr/share/man

Install the package

make MANDIR=/usr/share/man install &&
ln -sv ../../etc/ssl /usr/share &&
cp -v -r certs /etc/ssl &&
install -v -d -m755 /usr/share/doc/openssl-1.0.1e &&
cp -v -r doc/{HOWTO,README,*.{txt,html,gif}} \
    /usr/share/doc/openssl-1.0.1e

Multilib

32Bit

Apply Patches:

patch -Np1 -i ../openssl-1.0.1e-fix_manpages-1.patch 

Configure the Package (Use the appropriate command):

x86_64

patch -Np1 -i ../openssl-1.0.1e-32bit_x86_64-1.patch &&
./Configure linux-x86_64-32 --openssldir=/etc/ssl --prefix=/usr shared

Sparc

./Configure linux-sparcv9 --openssldir=/etc/ssl --prefix=/usr shared

Mips (Little-Endian)

patch -Np1 -i ../openssl-1.0.1e-mips_support-1.patch &&
./Configure linux-mipsel --openssldir=/etc/ssl --prefix=/usr shared

Mips (Big-Endian)

patch -Np1 -i ../openssl-1.0.1e-mips_support-1.patch &&
./Configure linux-mips --openssldir=/etc/ssl --prefix=/usr shared

PowerPC

./Configure linux-ppc --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

USE_ARCH=32 make CC="gcc ${BUILD32}" PERL=/usr/bin/perl

Install the package:

USE_ARCH=32 make PERL=/usr/bin/perl MANDIR=/usr/share/man install

N32

Apply Patches:

patch -Np1 -i ../openssl-1.0.1e-fix_manpages-1.patch &&
patch -Np1 -i ../openssl-1.0.1e-mips_support-1.patch

Configure the Package (Use the appropriate command):

Mips (Little-Endian)

./Configure linux-mipsel-n32 --openssldir=/etc/ssl --prefix=/usr shared

Mips (Big-Endian)

./Configure linux-mips-n32 --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

USE_ARCH=n32 make CC="gcc ${BUILDN32}" PERL=/usr/bin/perl LIBDIR=lib32

Install the package:

USE_ARCH=n32 make PERL=/usr/bin/perl MANDIR=/usr/share/man LIBDIR=lib32 install

64Bit

Apply Patches:

patch -Np1 -i ../openssl-1.0.1e-fix_manpages-1.patch 

Configure the Package (Use the appropriate command):

x86_64

./Configure linux-x86_64 --openssldir=/etc/ssl --prefix=/usr shared

Sparc

./Configure linux64-sparcv9 --openssldir=/etc/ssl --prefix=/usr shared

Mips (Little-Endian)

patch -Np1 -i ../openssl-1.0.1e-mips_support-1.patch &&
./Configure linux-mips64el --openssldir=/etc/ssl --prefix=/usr shared

Mips (Big-Endian)

patch -Np1 -i ../openssl-1.0.1e-mips_support-1.patch &&
./Configure linux-mips64 --openssldir=/etc/ssl --prefix=/usr shared

PowerPC

./Configure linux-ppc64 --openssldir=/etc/ssl --prefix=/usr shared

Compile the package:

USE_ARCH=64 make CC="gcc ${BUILD64}" PERL=/usr/bin/perl LIBDIR=lib64

Install the package:

USE_ARCH=64 make PERL=/usr/bin/perl MANDIR=/usr/share/man LIBDIR=lib64 install &&
ln -sv ../../etc/ssl /usr/share &&
cp -v -r certs /etc/ssl &&
install -v -d -m755 /usr/share/doc/openssl-1.0.1e &&
cp -v -r doc/{HOWTO,README,*.{txt,html,gif}} \
    /usr/share/doc/openssl-1.0.1e

Configuring

You can create a ca-bundle with the following script, it is from: http://www.mail-archive.com/modssl-users@modssl.org/msg16980.html

cat > mkcabundle.pl << "EOF"
#!/usr/bin/perl -w                                                                                                          
#                                                                                                                           
# Used to regenerate ca-bundle.crt from the Mozilla certdata.txt.                                                           
# Run as ./mkcabundle.pl > ca-bundle.crt                                                                                    
#                                                                                                                           

my $cvsroot = ':pserver:anonymous@cvs-mirror.mozilla.org:/cvsroot';
my $certdata = 'mozilla/security/nss/lib/ckfw/builtins/certdata.txt';

open(IN, "cvs -d $cvsroot co -p $certdata|")
    || die "could not check out certdata.txt";

my $incert = 0;

print<<EOH;
# This is a bundle of X.509 certificates of public Certificate
# Authorities.  It was generated from the Mozilla root CA list.
#
# Source: $certdata
#
EOH

while (<IN>) {
    if (/^CKA_VALUE MULTILINE_OCTAL/) {
        $incert = 1;
        open(OUT, "|openssl x509 -text -inform DER -fingerprint")
            || die "could not pipe to openssl x509";
    } elsif (/^END/ && $incert) {
        close(OUT);
        $incert = 0;
        print "\n\n";
    } elsif ($incert) {
        my @bs = split(/\\/);
        foreach my $b (@bs) {
            chomp $b;
            printf(OUT "%c", oct($b)) unless $b eq '';
        }
    } elsif (/^CVS_ID.*Revision: ([^ ]*).*/) {
        print "# Generated from certdata.txt RCS revision $1\n#\n";
    }
}
EOF

This command requires that you have Perl and CVS installed:

./mkcabundle.pl > ca-bundle.crt &&
install -Dv -m644 ca-bundle.crt /etc/ssl/certs

Contents

Installed Programs:	c_rehash, openssl
Installed Libraries:	libcrypto.{so,a}, libssl.{so,a}
Installed Directories:	/etc/ssl, /usr/include/ssl, /usr/lib/engines, /usr/share/doc/openssl-1.0.1e

Short Descriptions

c_rehash	is a Perl script that scans all files in a directory and adds symbolic links to their hash values.
openssl	is a command-line tool for using the various cryptography functions of OpenSSL's crypto library from the shell.
libcrypto.{so,a}	implements a wide range of cryptographic algorithms used in various Internet standards.
libssl.{so,a}	implements the Secure Sockets Layer (SSL v2/v3) and Transport Layer Security (TLS v1) protocols