PCI Utilities

Download Source:	http://www.kernel.org/pub/software/utils/pciutils/pciutils-2.2.3.tar.bz2

Warning: pciutils-2.2.4 does not provide currect libpci.a and makes the HAL build fail.

---

Introduction to PCI Utilities

The PCI Utilities package is a set of programs for listing PCI devices, inspecting their status and setting their configuration registers.

Non-Multilib

Compile the package:

sed -i 's/null ;/null 2>\&1 ;/' update-pciids.sh &&
make PREFIX=/usr

Install the package

make PREFIX=/usr install

Some packages require the PCI static library. To install the library and headers, issue the following commands:

install -v -m 755 -d /usr/include/pci &&
install -v -m 644 lib/libpci.a /usr/lib &&
install -v -m 644 lib/*.h /usr/include/pci

Command Explanations

sed -i 's/null ;/null 2>\&1 ;/' update-pciids.sh: This command suppresses some unneeded screen output from the update-pciids command if you don't have either Lynx or Wget installed by redirecting the stderr output of the embedded which command to /dev/null.

Multilib

32Bit

Compile the package:

sed -i 's/null ;/null 2>\&1 ;/' update-pciids.sh &&
make PREFIX=/usr CC="gcc ${BUILD32}"

Install the package

make PREFIX=/usr install

Some packages require the PCI static library. To install the library and headers, issue the following commands:

install -v -m 755 -d /usr/include/pci &&
install -v -m 644 lib/libpci.a /usr/lib &&
install -v -m 644 lib/*.h /usr/include/pci

N32

Compile the package:

sed -i 's/null ;/null 2>\&1 ;/' update-pciids.sh &&
make PREFIX=/usr CC="gcc ${BUILDN32}"

Install the package

make PREFIX=/usr install

Some packages require the PCI static library. To install the library and headers, issue the following commands:

install -v -m 755 -d /usr/include/pci &&
install -v -m 644 lib/libpci.a /usr/lib32 &&
install -v -m 644 lib/*.h /usr/include/pci

64Bit

Compile the package:

sed -i 's/null ;/null 2>\&1 ;/' update-pciids.sh &&
make PREFIX=/usr CC="gcc ${BUILD64}"

Install the package

make PREFIX=/usr install

Some packages require the PCI static library. To install the library and headers, issue the following commands:

install -v -m 755 -d /usr/include/pci &&
install -v -m 644 lib/libpci.a /usr/lib64 &&
install -v -m 644 lib/*.h /usr/include/pci

Configuring

pci.ids

The pci.ids data file is constantly being updated. To get a current version of this file run update-pciids. This program requires Which to find Curl, Wget, or Lynx which is used to download the most current file.

Contents

Installed Programs:	lspci, setpci and update-pciids
Installed Libraries:	libpci.a
Installed Directories:	/usr/include/pci

Short Descriptions

lspci	is a utility for displaying information about all PCI buses in the system and all devices connected to them.
setpci	is a utility for querying and configuring PCI devices.
update-pciids	fetches the current version of the PCI ID list. Requires Curl, Wget or Lynx.
libpci.a	is the static library that allows applications to access the PCI subsystem.