Difference between revisions of "Xorg7/MesaLib"

Latest revision as of 14:42, 10 January 2012

Download Source:
ftp://ftp.freedesktop.org/pub/mesa/7.9/MesaLib-7.9.tar.gz
ftp://ftp.freedesktop.org/pub/mesa/7.9/MesaGLUT-7.9.tar.bz2

Back to libdrm

Introduction to Mesa

Mesa is an OpenGL compatible 3D library. Three packages are available.

MesaLib - the main Mesa library source code, drivers and documentation.
MesaGLUT - provides a working libglut.

You'll often only need the first package. However, there are a few packages that can use a GLUT library (such as LibTIFF), so you may wish to install MesaGLUT as well. If you choose to install MesaGLUT, extract all two tarballs from the same toplevel directory. All two will extract to the Mesa-7.9 directory.

Homepage: http://www.mesa3d.org/

Dependencies

Required

Xorg Protocol Headers glproto >=1.4.5
Xorg Libraries (including the Xdamage protocol)
Xorg Utilities
libdrm
talloc

Optional

SELinux
XCB

Configuration Information

--enable-xcb: enables the use of the optional dependency XCB.

Non-Multilib

Configure the package:

./configure $XORG_CONFIG

Compile the package:

make

Install the package:

make install

== Multilib == ""NEEDS UPDATING""

32Bit

The Mesa source is needed to build Xorg7/Xserver, save the Mesa source tree for use with the build.

mv Mesa-7.9{,-32} &&
cd Mesa-7.9-32

Compile the package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
    ./configure $XORG_CONFIG32 --enable-32-bit && \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
    make CC="gcc ${BUILD32} -I$XORG_PREFIX/include" \
    CXX="g++ ${BUILD32} -I$XORG_PREFIX/include"

Install the package:

make install

N32

The Mesa source is needed to build Xorg7/Xserver, save the Mesa source tree for use with the build.

mv Mesa-7.9{,-n32} &&
cd Mesa-7.9-n32

Compile the package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
    ./configure $XORG_CONFIGN32 --enable-32-bit && \
PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
    make CC="gcc ${BUILDN32} -I$XORG_PREFIX/include" \
    CXX="g++ ${BUILDN32} -I$XORG_PREFIX/include"

Install the package:

make install

64Bit

The Mesa source is needed to build Xorg7/Xserver, save the Mesa source tree for use with the build.

mv Mesa-7.9{,-64} &&
cd Mesa-7.9-64

Compile the package:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
    ./configure $XORG_CONFIG64 --enable-64-bit && \
PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
    make CC="gcc ${BUILD64} -I$XORG_PREFIX/include" \
    CXX="g++ ${BUILD64} -I$XORG_PREFIX/include"

Install the package:

make install

For older Mesa Packages only

The Mesa Demos are in an own package now - needs to be configured and made seperately

If you would like to build and install glxinfo and glxgears execute the following command:

PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
make CC="gcc ${BUILD64}" -C progs/xdemos glxinfo glxgears &&
install -m755 -v progs/xdemos/{glxinfo,glxgears} /usr/bin

Forward to xbitmaps

@@ Line 3: / Line 3: @@
 !Download Source:
 |-valign="top"
-| http://www.mesa3d.org/beta/MesaLib-{{Mesa-Version}}.tar.gz
+| ftp://ftp.freedesktop.org/pub/mesa/7.9/MesaLib-{{Mesa-Version}}.tar.gz
 |-valign="top"
-| http://www.mesa3d.org/beta/MesaDemos-{{Mesa-Version}}.tar.gz
+| ftp://ftp.freedesktop.org/pub/mesa/7.9/MesaGLUT-{{Mesa-Version}}.tar.bz2
-|-valign="top"
-| http://www.mesa3d.org/beta/MesaGLUT-{{Mesa-Version}}.tar.gz
 |}
@@ Line 17: / Line 15: @@
 * MesaLib - the main Mesa library source code, drivers and documentation.
-* MesaDemos - OpenGL demonstration and test programs. Most of the programs require GLUT.
 * MesaGLUT - provides a working libglut.
-If you're not interested in running the demos, you'll only need the first package.  However, there are a few other packages that can use a GLUT library (such as [[LibTIFF]]), so you may wish to install MesaGLUT as well. If you choose to install the demos, extract all three tarballs from the same toplevel directory. All three will extract to the Mesa-{{Mesa-Version}} directory.
+You'll often only need the first package.  However, there are a few packages that can use a GLUT library (such as [[LibTIFF]]), so you may wish to install MesaGLUT as well. If you choose to install MesaGLUT, extract all two tarballs from the same toplevel directory. All two will extract to the Mesa-{{Mesa-Version}} directory.
 <b>Homepage:</b> http://www.mesa3d.org/
@@ Line 31: / Line 28: @@
 * Xorg [[Xorg7/Utilities|Utilities]]
 * [[Xorg7/libdrm|libdrm]]
+* [[talloc]]
 === Optional ===
+* [[SELinux]]
 * [[XCB]]
-{{Note|Don't remove the source after building Mesa.  It is needed by the [[Xorg7/Xserver]] build.  You need to pass the path to the MesaLib source when building xorg-server, so take note of it.}}
+== Configuration Information ==
+{|
+|-
+|''--enable-xcb:'' enables the use of the optional dependency XCB.
+|}
 == Non-Multilib ==
-Create a basic configuration for your system.  There are many more than linux-dri; execute make to see the list.  Each is a file in the configs directory if you wish to research the differences.  Replace linux-dri with the basic configuration you have selected:
+Configure the package:
-  ln -sf linux-dri configs/current
+  ./configure $XORG_CONFIG
-Regardless of the basic configuration you chose, add the following:
- echo 'X11_INCLUDES = $(shell pkg-config --cflags-only-I x11)' >> configs/current &&
- echo 'CFLAGS += $(X11_INCLUDES)' >> configs/current &&
- echo 'EXTRA_LIB_PATH = $(shell pkg-config --libs-only-L x11)' >> configs/current &&
- echo "DRI_DRIVER_INSTALL_DIR = ${XORG_PREFIX}/lib/xorg/modules/dri" >> configs/current &&
- echo "INSTALL_DIR = /usr" >> configs/current &&
- echo "LIB_DIR = lib" >> configs/current &&
- echo "DRI_DIRS += swrast" >> configs/current
-If you have [[XCB]] installed you also need to add the following to the config:
- echo 'DEFINES += -DUSE_XCB' >> configs/current &&
- echo 'X11_INCLUDES += $(shell pkg-config --cflags-only-I xcb x11-xcb xcb-glx)' >> configs/current &&
- echo 'GL_LIB_DEPS += $(shell pkg-config --libs xcb x11-xcb xcb-glx)' >> configs/current
 Compile the package:
-  make default
+  make
 Install the package:
@@ Line 67: / Line 55: @@
   make install
-If you would like to build and install glxinfo and glxgears execute the following command:
+== Multilib == ""NEEDS UPDATING""
- make -C progs/xdemos glxinfo glxgears &&
- install -m755 -v progs/xdemos/{glxinfo,glxgears} /usr/bin
-== Multilib ==
 === 32Bit ===
@@ Line 80: / Line 63: @@
   mv Mesa-{{Mesa-Version}}{,-32} &&
   cd Mesa-{{Mesa-Version}}-32
-Create a basic configuration for your system.  There are many more than linux-dri; execute make to see the list.  Each is a file in the configs directory if you wish to research the differences.  Replace linux-dri with the basic configuration you have selected:
- ln -sf linux-dri configs/current
-Regardless of the basic configuration you chose, add the following:
- echo 'X11_INCLUDES = $(shell pkg-config --cflags-only-I x11)' >> configs/current &&
- echo 'CFLAGS += $(X11_INCLUDES)' >> configs/current &&
- echo 'EXTRA_LIB_PATH = $(shell pkg-config --libs-only-L x11)' >> configs/current &&
- echo "DRI_DRIVER_INSTALL_DIR = ${XORG_PREFIX}/lib/xorg/modules/dri" >> configs/current &&
- echo "INSTALL_DIR = /usr" >> configs/current &&
- echo "LIB_DIR = lib" >> configs/current &&
- echo "DRI_DIRS += swrast" >> configs/current
-If you have [[XCB]] installed you also need to add the following to the config:
- echo 'DEFINES += -DUSE_XCB' >> configs/current &&
- echo 'X11_INCLUDES += $(shell pkg-config --cflags-only-I xcb x11-xcb xcb-glx)' >> configs/current &&
- echo 'GL_LIB_DEPS += $(shell pkg-config --libs xcb x11-xcb xcb-glx)' >> configs/current
 Compile the package:
   PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
-  make CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" default
+     ./configure $XORG_CONFIG32 --enable-32-bit && \
+  PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
+     make CC="gcc ${BUILD32} -I$XORG_PREFIX/include" \
+     CXX="g++ ${BUILD32} -I$XORG_PREFIX/include"
 Install the package:
@@ Line 116: / Line 82: @@
   mv Mesa-{{Mesa-Version}}{,-n32} &&
   cd Mesa-{{Mesa-Version}}-n32
-Create a basic configuration for your system.  There are many more than linux-dri; execute make to see the list.  Each is a file in the configs directory if you wish to research the differences.  Replace linux-dri with the basic configuration you have selected:
- ln -sf linux-dri configs/current
-Regardless of the basic configuration you chose, add the following:
- echo 'X11_INCLUDES = $(shell pkg-config --cflags-only-I x11)' >> configs/current &&
- echo 'CFLAGS += $(X11_INCLUDES)' >> configs/current &&
- echo 'EXTRA_LIB_PATH = $(shell pkg-config --libs-only-L x11)' >> configs/current &&
- echo "DRI_DRIVER_INSTALL_DIR = ${XORG_PREFIX}/lib32/xorg/modules/dri" >> configs/current &&
- echo "INSTALL_DIR = /usr" >> configs/current &&
- echo "LIB_DIR = lib32" >> configs/current &&
- echo "DRI_DIRS += swrast" >> configs/current
-If you have [[XCB]] installed you also need to add the following to the config:
- echo 'DEFINES += -DUSE_XCB' >> configs/current &&
- echo 'X11_INCLUDES += $(shell pkg-config --cflags-only-I xcb x11-xcb xcb-glx)' >> configs/current &&
- echo 'GL_LIB_DEPS += $(shell pkg-config --libs xcb x11-xcb xcb-glx)' >> configs/current
 Compile the package:
-  PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" \
+  PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
-  make CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" default
+     ./configure $XORG_CONFIGN32 --enable-32-bit && \
+  PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" \
+     make CC="gcc ${BUILDN32} -I$XORG_PREFIX/include" \
+     CXX="g++ ${BUILDN32} -I$XORG_PREFIX/include"
 Install the package:
@@ Line 152: / Line 101: @@
   mv Mesa-{{Mesa-Version}}{,-64} &&
   cd Mesa-{{Mesa-Version}}-64
-Create a basic configuration for your system.  There are many more than linux-dri; execute make to see the list.  Each is a file in the configs directory if you wish to research the differences.  Replace linux-dri with the basic configuration you have selected:
- ln -sf linux-dri configs/current
-Regardless of the basic configuration you chose, add the following:
- echo 'X11_INCLUDES = $(shell pkg-config --cflags-only-I x11)' >> configs/current &&
- echo 'CFLAGS += $(X11_INCLUDES)' >> configs/current &&
- echo 'EXTRA_LIB_PATH = $(shell pkg-config --libs-only-L x11)' >> configs/current &&
- echo "DRI_DRIVER_INSTALL_DIR = ${XORG_PREFIX}/lib64/xorg/modules/dri" >> configs/current &&
- echo "INSTALL_DIR = /usr" >> configs/current &&
- echo "LIB_DIR = lib64" >> configs/current &&
- echo "DRI_DIRS += swrast" >> configs/current
-If you have [[XCB]] installed you also need to add the following to the config:
- echo 'DEFINES += -DUSE_XCB' >> configs/current &&
- echo 'X11_INCLUDES += $(shell pkg-config --cflags-only-I xcb x11-xcb xcb-glx)' >> configs/current &&
- echo 'GL_LIB_DEPS += $(shell pkg-config --libs xcb x11-xcb xcb-glx)' >> configs/current
 Compile the package:
   PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
-  make CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" default
+     ./configure $XORG_CONFIG64 --enable-64-bit && \
+  PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" \
+     make CC="gcc ${BUILD64} -I$XORG_PREFIX/include" \
+     CXX="g++ ${BUILD64} -I$XORG_PREFIX/include"
 Install the package:
   make install
+== For older Mesa Packages only ==
+The Mesa Demos are in an own package now - needs to be configured and made seperately
 If you would like to build and install glxinfo and glxgears execute the following command:

Installed Directories:	/usr/include/GLES
Installed Programs:	None
Installed Libraries:	libGL.so, libGLU.so, libGLw.so, libOSMesa.so, libglut.so

Difference between revisions of "Xorg7/MesaLib"

Latest revision as of 14:42, 10 January 2012

Contents

Introduction to Mesa

Dependencies

Required

Optional

Configuration Information

Non-Multilib

32Bit

N32

64Bit

For older Mesa Packages only

Contents

Short Description

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools