Sg3 utils

Download Source:	http://sg.danny.cz/sg/p/sg3_utils-1.27.tgz

---

Introduction to Sg3 utils

The sg3_utils package contains utilities that send SCSI commands to devices. As well as devices on transports traditionally associated with SCSI (e.g. Fibre Channel (FCP), Serial Attached SCSI (SAS) and the SCSI Parallel Interface(SPI)) many other devices use SCSI command sets.

Project Homepage: http://sg.danny.cz/sg/index.html

Non-Multilib

Compile the package:

./configure --prefix=/usr &&
make

Install the package

make install

Multilib

32Bit

Compile the package:

To do ...

Install the package

To do ...

N32

Compile the package:

To do ...

Install the package

To do ...

64Bit

Compile the package:

To do ...

Install the package

To do ...

Contents

Installed Programs:	sg_dd, sg_emc_trespass, sg_format, sg_get_config, sg_ident, sginfo, sg_inq, sg_logs, sg_luns, sg_map26, sg_map, sgm_dd, sg_modes, sg_opcodes, sgp_dd, sg_persist, sg_prevent, sg_raw, sg_rbuf, sg_rdac, sg_read, sg_readcap, sg_read_buffer, sg_read_long, sg_reassign, sg_requests, sg_reset, sg_rmsn, sg_rtpg, sg_safte, sg_sat_identify, sg_sat_set_features, sg_scan, sg_senddiag, sg_ses, sg_start, sg_stpg, sg_sync, sg_test_rwbuf, sg_turs, sg_verify, sg_vpd, sg_write_buffer, sg_write_long, sg_wr_mode
Installed Libraries:	libsgutils.{a,la,so}
Installed Directories:	/usr/include/scsi