Python

From CBLFS
Jump to navigationJump to search
Download Source: http://www.python.org/ftp/python/2.7.8/Python-2.7.8.tar.xz
Alternate Requierd Patch (For Multilib): Refer to https://www.williamfeely.info/download/lfs-multilib/Python-2.7.6-multilib-1.patch
Required Patch (For Multilib): Bad link: http://svn.cross-lfs.org/svn/repos/patches/Python/Python-2.7.8-multilib-1.patch

Introduction to Python

Python is a dynamic object-oriented programming language that can be used for many kinds of software development. It offers strong support for integration with other languages and tools, comes with extensive standard libraries, and can be learned in a few days. Many Python programmers report substantial productivity gains and feel the language encourages the development of higher quality, more maintainable code.

Project Homepage: http://www.python.org/

Dependencies

Optional

Non-Multilib

Caution.png

Note

If the test suite (make test) fails because it cannot find python's math library, then you will need to install python before you can run the tests.
Caution.png

Note

If the installation of python fails, rebuild python. It appears to be somewhat inconsistant with regards to whether it works or not. The -fwrapv flag used with make attempts to fixes this. If it still doesn't complete make install without failing, then use make -i install instead (-i tells make to ignore errors). It's less desirable, but it should work. The other option is to run make install twice. The second time around it locates the installed python libraries it needs for the installation and is able to complete it.

Compile the package: 

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
./configure --prefix=/usr --enable-shared &&
make

Install the package 

make install

Command Explanations

--enable-shared: Enables the building of shared libraries.

Multilib

32Bit

Compile the package: 

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
sed -i 's@/lib64@/lib@g' Modules/_ctypes/libffi/m4/libtool.m4 \
    Modules/_ctypes/libffi/configure setup.py &&
sed -i "s/'lib64'/'lib'/g" setup.py &&
CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" ./configure --prefix=/usr \
    --enable-shared &&
make

Install the package 

make install &&
mv -v /usr/bin/python{,-32} &&
mv -v /usr/bin/python2{,-32} &&
mv -v /usr/bin/python2.7{,-32} &&
mv -v /usr/include/python2.7/pyconfig{,-32}.h &&
ln -sfv python2.7-32 /usr/bin/python2-32 &&
ln -sfv python2-32 /usr/bin/python-32

N32

Change the libdir that Python is going to use to lib32: 

patch -Np1 -i ../Python-2.7.8-multilib-1.patch &&

sed -i -e "s|@@MULTILIB_DIR@@|/lib32|g" Lib/distutils/command/install.py \
       Lib/distutils/sysconfig.py \
       Lib/pydoc.py \
       Lib/site.py \
       Lib/sysconfig.py \
       Lib/test/test_dl.py \
       Lib/test/test_site.py \
       Lib/trace.py \
       Makefile.pre.in \
       Modules/getpath.c \
       setup.py

Compile the package: 

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
sed -i 's@/lib64@/lib32@g' Modules/_ctypes/libffi/m4/libtool.m4 \
    Modules/_ctypes/libffi/configure setup.py &&
sed -i "s/'lib64'/'lib32'/g" setup.py &&
CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" ./configure --prefix=/usr \
    --libdir=/usr/lib32 --enable-shared &&
make

Install the package 

make install &&
mv -v /usr/bin/python{,-n32} &&
mv -v /usr/bin/python2{,-n32} &&
mv -v /usr/bin/python2.7{,-n32} &&
mv -v /usr/include/python2.7/pyconfig{,-n32}.h &&
ln -sfv python2.7-n32 /usr/bin/python2-n32 &&
ln -sfv python2-n32 /usr/bin/python-n32

64Bit

Change the libdir that Python is going to use to lib64: 

patch -Np1 -i ../Python-2.7.8-multilib-1.patch &&

sed -i -e "s|@@MULTILIB_DIR@@|/lib64|g" Lib/distutils/command/install.py \
       Lib/distutils/sysconfig.py \
       Lib/pydoc.py \
       Lib/site.py \
       Lib/sysconfig.py \
       Lib/test/test_dl.py \
       Lib/test/test_site.py \
       Lib/trace.py \
       Makefile.pre.in \
       Modules/getpath.c \
       setup.py

Compile the package: 

sed -i "s@/usr/X11R6@${XORG_PREFIX}@g" setup.py &&
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" ./configure --prefix=/usr \
    --libdir=/usr/lib64 --enable-shared &&
make

Remark

  • sed on Modules/getpath.c did not work for me, had to add
sed -i 's@lib/python@lib64/python@g' Modules/getpath.c
  • Needed additional explicit export before configure:
export USE_ARCH=64
  • Needed LDFLAGS making the call to configure look like this:
CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" LDFLAGS="-L/usr/lib64" \
./configure --prefix=/usr --libdir=/usr/lib64 --enable-shared
  • Needed EXTRA_CFLAGS for make:
make EXTRA_CFLAGS="-fwrapv"

Remark ends


Install the package 

make install &&
mv -v /usr/bin/python{,-64} &&
mv -v /usr/bin/python2{,-64} &&
mv -v /usr/bin/python2.7{,-64} &&
ln -sfv python2.7-64 /usr/bin/python2-64 &&
ln -sfv python2-64 /usr/bin/python-64 &&
ln -sfv multiarch_wrapper /usr/bin/python &&
ln -sfv multiarch_wrapper /usr/bin/python2 &&
ln -sfv multiarch_wrapper /usr/bin/python2.7 &&
mv -v /usr/include/python2.7/pyconfig{,-64}.h

Creating a Stub Header (Multilib Only)

Creating a Generic Stub Header

cat > /usr/include/python2.7/pyconfig.h << "EOF"
/* pyconfig.h - Stub Header  */
#ifndef __STUB__PYCONFIG_H__
#define __STUB__PYCONFIG_H__

#if defined(__x86_64__) || \
    defined(__sparc64__) || \
    defined(__arch64__) || \
    defined(__powerpc64__) || \
    defined (__s390x__)
# include "pyconfig-64.h"
#else
# include "pyconfig-32.h"
#endif

#endif /* __STUB__PYCONFIG_H__ */
EOF

Creating a Stub Header For Mips

cat > /usr/include/python2.7/pyconfig.h << "EOF"
/* pyconfig.h - Stub Header  */
#ifndef __STUB__PYCONFIG_H__
#define __STUB__PYCONFIG_H__

#include <sgidefs.h>

#if (_MIPS_SIM == _ABIO32)
# include "pyconfig-32.h"
#elif (_MIPS_SIM == _ABIN32)
# include "pyconfig-n32.h"
#elif (_MIPS_SIM == _ABI64)
# include "pyconfig-64.h"
#endif

#endif /* __STUB__PYCONFIG_H__ */
EOF

Contents

Installed Programs: pydoc, python, python2.7, python-config, python2.7-config, smtpd.py, and (if Tk is installed) idle
Installed Libraries: libpython2.7.so and various modules in /usr/lib/lib-dynload
Installed Directories: /usr/include/python2.7, /usr/lib/python2.7

Short Descriptions

pydoc is a tool for reading python documentation.
python is an interpreted, interactive, object-oriented programming language.
python2.7 is a version-specific version of python.
python-config is a symlink to python2.7-config.
python2.7.8-config ???
smtpd.py is a Python implemention of the minimal SMTP protocol as defined in RFC 821.
idle is an Integrated DeveLopment Environment (IDLE) for Python. It's based on Tkinter, Python's bindings to the Tk widget set.
libpython2.7.so ???
Retrieved from "?title=Python&oldid=21666"