Xorg6
Contents
Introduction to Xorg6
Project Homepage: Unknown
Dependencies
Required
Optional
Non-Multilib
The 15-xorg.sh from the Bash Startup Files is meant to be used with Xorg7. Replace that file with one meant for use with Xorg6:
cat > /etc/profile.d/15-xorg.sh << "EOF" # Begin /etc/profile.d/15-xorg.sh export XORG_PREFIX=/usr/X11R6 export PATH="${PATH}:${XORG_PREFIX}/bin" export PKG_CONFIG_PATH="${PKG_CONFIG_PATH}${PKG_CONFIG_PATH+:}${XORG_PREFIX}/lib/pkgconfig" # End /etc/profile.d/15-xorg.sh EOF source /etc/profile
Patch the source:
patch -Np1 -i ../xorg-6.9.0-luit_race-1.patch && patch -Np1 -i ../xorg-6.9.0-security-3.patch
If you would like to install Xorg6 into a prefix other then /usr/X11R6 correct a hard-coded path:
sed -i 's@/usr/X11R6@${XORG_PREFIX}@' programs/luit/parser.h
Xorg insists on putting its boot and profile scripts into the /etc directory even if specifically told not to compile anything Xprint server or client:
sed -i '/^SUBDIRS =/s/ etc$//' programs/Xserver/Xprint/Imakefile
Build the lndir program that is going to be used to create the shadow directory:
pushd config/util && make -f Makefile.ini lndir && popd
Create the shadow directory:
mkdir ../xcbuild && cd ../xcbuild && ../xc/config/util/lndir ../xc
Create a basic host.def file:
cat > config/cf/host.def << "EOF" /* Begin Xorg host.def file */ /* System Related Information. If you read and configure only one * section then it should be this one. The Intel architecture defaults * are set for a i686 and higher. Axp is for the Alpha architecture * and Ppc is for the Power PC. AMD64 is for the Opteron processor. * Note that there have been reports that the Ppc optimization line * causes segmentation faults during build. If that happens, try * building without the DefaultGcc2PpcOpt line. ***********/ /* #define DefaultGcc2i386Opt -O2 -fno-strength-reduce \ -fno-strict-aliasing -march=i686 */ /* #define DefaultGcc2AMD64Opt -O2 -fno-strength-reduce \ -fno-strict-aliasing */ /* #define DefaultGcc2AxpOpt -O2 -mcpu=ev6 */ /* #define DefaultGcc2PpcOpt -O2 -mcpu=750 */ #define HasFreetype2 YES #define HasFontconfig YES #define HasExpat YES #define HasLibpng YES #define HasZlib YES /* Uncomment the following define if you'd like * xdm to use Linux-PAM #define HasPam YES */ /* * Which drivers to build. When building a static server, each of * these will be included in it. When building the loadable server * each of these modules will be built. * #define XF86CardDrivers mga glint nv tga s3virge sis rendition \ neomagic i740 tdfx savage \ cirrus vmware tseng trident chips apm \ GlideDriver fbdev i128 \ ati DevelDrivers ark \ cyrix siliconmotion vesa vga \ XF86OSCardDrivers XF86ExtraCardDrivers */ /* * Select the XInput devices you want by uncommenting this. * #define XInputDrivers mouse keyboard acecad calcomp citron \ digitaledge dmc dynapro elographics \ microtouch mutouch penmount spaceorb \ summa wacom void magictouch aiptek */ /* Most installs will only need this */ #define XInputDrivers mouse keyboard /* Xterm is no longer built by default */ #define BuildXterm YES /* Disable building Xprint server and clients until we get them figured * out but build Xprint libraries to allow precompiled binaries such as * Acrobat Reader to run. */ #define XprtServer NO #define BuildXprintClients NO /* Uncomment the following define if you would prefer to install X into * /usr or change it to any other location that you prefer. * The GL related defines disable compatibility symlinks (the links * are not needed when X is installed in /usr). #define ProjectRoot /usr #define LinkGLToUsrInclude NO #define LinkGLToUsrLib NO */ /* End Xorg host.def file */ EOF
If you're on a pure64 system add the following host.def.
cat >> config/cf/host.def << "EOF" /* On pure64 systems Xorg will attempt to install libraries into lib64. The * following will prevent this */ #define HaveLib64 NO EOF
Compile the package:
sed -i -e "s@^#include <linux/config.h>@/* & */@" \ $(grep -lr linux/config.h *) && make World
Install the package:
make install && make install.man
Create the default links from where you've installed Xorg to /usr.
ln -v -s ../X11R6/bin /usr/bin/X11 && ln -v -s ../X11R6/lib/X11 /usr/lib/X11 && ln -v -s ../X11R6/include/X11 /usr/include/X11
The Xorg fonts have been installed outside of FontConfig's default search path of /usr/share/fonts:
install -v -d -m755 /usr/share/fonts && ln -svn /usr/X11R6/lib/X11/fonts/TTF /usr/share/fonts/X11-TTF
Multilib
The 15-xorg.sh from the Bash Startup Files is meant to be used with Xorg7. Replace that file with one meant for use with Xorg6:
cat > /etc/profile.d/15-xorg.sh << "EOF" # Begin /etc/profile.d/15-xorg.sh export XORG_PREFIX=/usr/X11R6 export PATH="${PATH}:${XORG_PREFIX}/bin" export PKG_CONFIG_PATH32="${PKG_CONFIG_PATH32}${PKG_CONFIG_PATH32+:}${XORG_PREFIX}/lib/pkgconfig" export PKG_CONFIG_PATHN32="${PKG_CONFIG_PATHN32}${PKG_CONFIG_PATHN32+:}${XORG_PREFIX}/lib32/pkgconfig" export PKG_CONFIG_PATH64="${PKG_CONFIG_PATH64}${PKG_CONFIG_PATH64+:}${XORG_PREFIX}/lib64/pkgconfig" # End /etc/profile.d/15-xorg.sh EOF source /etc/profile
32Bit
Patch the source:
patch -Np1 -i ../xorg-6.9.0-luit_race-1.patch && patch -Np1 -i ../xorg-6.9.0-security-3.patch
If you would like to install Xorg6 into a prefix other then /usr/X11R6 correct a hard-coded path:
sed -i 's@/usr/X11R6@${XORG_PREFIX}@' programs/luit/parser.h
Xorg insists on putting its boot and profile scripts into the /etc directory even if specifically told not to compile anything Xprint server or client:
sed -i '/^SUBDIRS =/s/ etc$//' programs/Xserver/Xprint/Imakefile
Build the lndir program that is going to be used to create the shadow directory:
pushd config/util && make -f Makefile.ini lndir && popd
Create the shadow directory:
mkdir ../xcbuild && cd ../xcbuild && ../xc/config/util/lndir ../xc
Create a basic host.def file:
cat > config/cf/host.def << "EOF" /* Begin Xorg host.def file */ /* System Related Information. If you read and configure only one * section then it should be this one. The Intel architecture defaults * are set for a i686 and higher. Axp is for the Alpha architecture * and Ppc is for the Power PC. AMD64 is for the Opteron processor. * Note that there have been reports that the Ppc optimization line * causes segmentation faults during build. If that happens, try * building without the DefaultGcc2PpcOpt line. ***********/ /* #define DefaultGcc2i386Opt -O2 -fno-strength-reduce \ -fno-strict-aliasing -march=i686 */ /* #define DefaultGcc2AMD64Opt -O2 -fno-strength-reduce \ -fno-strict-aliasing */ /* #define DefaultGcc2AxpOpt -O2 -mcpu=ev6 */ /* #define DefaultGcc2PpcOpt -O2 -mcpu=750 */ #define HasFreetype2 YES #define HasFontconfig YES #define HasExpat YES #define HasLibpng YES #define HasZlib YES /* Uncomment the following define if you'd like * xdm to use Linux-PAM #define HasPam YES */ /* * Which drivers to build. When building a static server, each of * these will be included in it. When building the loadable server * each of these modules will be built. * #define XF86CardDrivers mga glint nv tga s3virge sis rendition \ neomagic i740 tdfx savage \ cirrus vmware tseng trident chips apm \ GlideDriver fbdev i128 \ ati DevelDrivers ark \ cyrix siliconmotion vesa vga \ XF86OSCardDrivers XF86ExtraCardDrivers */ /* * Select the XInput devices you want by uncommenting this. * #define XInputDrivers mouse keyboard acecad calcomp citron \ digitaledge dmc dynapro elographics \ microtouch mutouch penmount spaceorb \ summa wacom void magictouch aiptek */ /* Most installs will only need this */ #define XInputDrivers mouse keyboard /* Xterm is no longer built by default */ #define BuildXterm YES /* Disable building Xprint server and clients until we get them figured * out but build Xprint libraries to allow precompiled binaries such as * Acrobat Reader to run. */ #define XprtServer NO #define BuildXprintClients NO /* Uncomment the following define if you would prefer to install X into * /usr or change it to any other location that you prefer. * The GL related defines disable compatibility symlinks (the links * are not needed when X is installed in /usr). #define ProjectRoot /usr #define LinkGLToUsrInclude NO #define LinkGLToUsrLib NO */ /* End Xorg host.def file */ EOF
Compile the package:
sed -i -e "s@^#include <linux/config.h>@/* & */@" \ $(grep -lr linux/config.h *) && PKG_CONFIG_PATH="${PKG_CONFIG_PATH32}" USE_ARCH=32 \ make CC="gcc ${BUILD32}" CXX="g++ ${BUILD32}" World
Install the package:
make install && make install.man && ln -v -s ../X11R6/lib/X11 /usr/lib/X11 && for prog in xft-config xcursor-config gccmakedep ccmakedep imake xmkmf; do mv -v /usr/X11R6/bin/$prog{,-32} done
N32
Patch the source:
patch -Np1 -i ../xorg-6.9.0-luit_race-1.patch && patch -Np1 -i ../xorg-6.9.0-security-3.patch
If you would like to install Xorg6 into a prefix other then /usr/X11R6 correct a hard-coded path:
sed -i 's@/usr/X11R6@${XORG_PREFIX}@' programs/luit/parser.h
Xorg insists on putting its boot and profile scripts into the /etc directory even if specifically told not to compile anything Xprint server or client:
sed -i '/^SUBDIRS =/s/ etc$//' programs/Xserver/Xprint/Imakefile
Build the lndir program that is going to be used to create the shadow directory:
pushd config/util && make -f Makefile.ini lndir && popd
Create the shadow directory:
mkdir ../xcbuild && cd ../xcbuild && ../xc/config/util/lndir ../xc
Create a basic host.def file:
cat > config/cf/host.def << "EOF" /* Begin Xorg host.def file */ /* System Related Information. If you read and configure only one * section then it should be this one. The Intel architecture defaults * are set for a i686 and higher. Axp is for the Alpha architecture * and Ppc is for the Power PC. AMD64 is for the Opteron processor. * Note that there have been reports that the Ppc optimization line * causes segmentation faults during build. If that happens, try * building without the DefaultGcc2PpcOpt line. ***********/ /* #define DefaultGcc2i386Opt -O2 -fno-strength-reduce \ -fno-strict-aliasing -march=i686 */ /* #define DefaultGcc2AMD64Opt -O2 -fno-strength-reduce \ -fno-strict-aliasing */ /* #define DefaultGcc2AxpOpt -O2 -mcpu=ev6 */ /* #define DefaultGcc2PpcOpt -O2 -mcpu=750 */ #define HasFreetype2 YES #define HasFontconfig YES #define HasExpat YES #define HasLibpng YES #define HasZlib YES /* Uncomment the following define if you'd like * xdm to use Linux-PAM #define HasPam YES */ /* * Which drivers to build. When building a static server, each of * these will be included in it. When building the loadable server * each of these modules will be built. * #define XF86CardDrivers mga glint nv tga s3virge sis rendition \ neomagic i740 tdfx savage \ cirrus vmware tseng trident chips apm \ GlideDriver fbdev i128 \ ati DevelDrivers ark \ cyrix siliconmotion vesa vga \ XF86OSCardDrivers XF86ExtraCardDrivers */ /* * Select the XInput devices you want by uncommenting this. * #define XInputDrivers mouse keyboard acecad calcomp citron \ digitaledge dmc dynapro elographics \ microtouch mutouch penmount spaceorb \ summa wacom void magictouch aiptek */ /* Most installs will only need this */ #define XInputDrivers mouse keyboard /* Xterm is no longer built by default */ #define BuildXterm YES /* Disable building Xprint server and clients until we get them figured * out but build Xprint libraries to allow precompiled binaries such as * Acrobat Reader to run. */ #define XprtServer NO #define BuildXprintClients NO /* Uncomment the following define if you would prefer to install X into * /usr or change it to any other location that you prefer. * The GL related defines disable compatibility symlinks (the links * are not needed when X is installed in /usr). #define ProjectRoot /usr #define LinkGLToUsrInclude NO #define LinkGLToUsrLib NO */ /* End Xorg host.def file */ EOF
Compile the package:
sed -i -e "s@^#include <linux/config.h>@/* & */@" \ $(grep -lr linux/config.h *) && PKG_CONFIG_PATH="${PKG_CONFIG_PATHN32}" USE_ARCH=n32 \ make CC="gcc ${BUILDN32}" CXX="g++ ${BUILDN32}" World
Install the package:
make install && make install.man && ln -v -s ../X11R6/lib32/X11 /usr/lib32/X11 && for prog in xft-config xcursor-config gccmakedep ccmakedep imake xmkmf; do mv -v /usr/X11R6/bin/$prog{,-n32} done
64Bit
Patch the source:
patch -Np1 -i ../xorg-6.9.0-luit_race-1.patch && patch -Np1 -i ../xorg-6.9.0-security-3.patch
If you would like to install Xorg6 into a prefix other then /usr/X11R6 correct a hard-coded path:
sed -i 's@/usr/X11R6@${XORG_PREFIX}@' programs/luit/parser.h
Xorg insists on putting its boot and profile scripts into the /etc directory even if specifically told not to compile anything Xprint server or client:
sed -i '/^SUBDIRS =/s/ etc$//' programs/Xserver/Xprint/Imakefile
Build the lndir program that is going to be used to create the shadow directory:
pushd config/util && make -f Makefile.ini lndir && popd
Create the shadow directory:
mkdir ../xcbuild && cd ../xcbuild && ../xc/config/util/lndir ../xc
Create a basic host.def file:
cat > config/cf/host.def << "EOF" /* Begin Xorg host.def file */ /* System Related Information. If you read and configure only one * section then it should be this one. The Intel architecture defaults * are set for a i686 and higher. Axp is for the Alpha architecture * and Ppc is for the Power PC. AMD64 is for the Opteron processor. * Note that there have been reports that the Ppc optimization line * causes segmentation faults during build. If that happens, try * building without the DefaultGcc2PpcOpt line. ***********/ /* #define DefaultGcc2i386Opt -O2 -fno-strength-reduce \ -fno-strict-aliasing -march=i686 */ /* #define DefaultGcc2AMD64Opt -O2 -fno-strength-reduce \ -fno-strict-aliasing */ /* #define DefaultGcc2AxpOpt -O2 -mcpu=ev6 */ /* #define DefaultGcc2PpcOpt -O2 -mcpu=750 */ #define HasFreetype2 YES #define HasFontconfig YES #define HasExpat YES #define HasLibpng YES #define HasZlib YES /* Uncomment the following define if you'd like * xdm to use Linux-PAM #define HasPam YES */ /* * Which drivers to build. When building a static server, each of * these will be included in it. When building the loadable server * each of these modules will be built. * #define XF86CardDrivers mga glint nv tga s3virge sis rendition \ neomagic i740 tdfx savage \ cirrus vmware tseng trident chips apm \ GlideDriver fbdev i128 \ ati DevelDrivers ark \ cyrix siliconmotion vesa vga \ XF86OSCardDrivers XF86ExtraCardDrivers */ /* * Select the XInput devices you want by uncommenting this. * #define XInputDrivers mouse keyboard acecad calcomp citron \ digitaledge dmc dynapro elographics \ microtouch mutouch penmount spaceorb \ summa wacom void magictouch aiptek */ /* Most installs will only need this */ #define XInputDrivers mouse keyboard /* Xterm is no longer built by default */ #define BuildXterm YES /* Disable building Xprint server and clients until we get them figured * out but build Xprint libraries to allow precompiled binaries such as * Acrobat Reader to run. */ #define XprtServer NO #define BuildXprintClients NO /* Uncomment the following define if you would prefer to install X into * /usr or change it to any other location that you prefer. * The GL related defines disable compatibility symlinks (the links * are not needed when X is installed in /usr). #define ProjectRoot /usr #define LinkGLToUsrInclude NO #define LinkGLToUsrLib NO */ /* End Xorg host.def file */ EOF
Compile the package:
sed -i -e "s@^#include <linux/config.h>@/* & */@" \ $(grep -lr linux/config.h *) && PKG_CONFIG_PATH="${PKG_CONFIG_PATH64}" USE_ARCH=64 \ make CC="gcc ${BUILD64}" CXX="g++ ${BUILD64}" World
Install the package:
make install && make install.man && ln -v -s ../X11R6/bin /usr/bin/X11 && ln -v -s ../X11R6/lib64/X11 /usr/lib64/X11 && ln -v -s ../X11R6/include/X11 /usr/include/X11 && for prog in xft-config xcursor-config gccmakedep ccmakedep imake xmkmf; do mv -v /usr/X11R6/bin/$prog{,-64} && ln -sfv /usr/bin/multiarch_wrapper /usr/X11R6/bin/$prog done
The Xorg fonts have been installed outside of FontConfig's default search path of /usr/share/fonts:
install -v -d -m755 /usr/share/fonts && ln -svn /usr/X11R6/lib64/X11/fonts/TTF /usr/share/fonts/X11-TTF